Answer:
B. the universe began with hot dense energy compressing into matter after which all matter and energy began to rapidly expanding away from each other.
hope it helps
Any two difference between short sightedness and long sightednes
Explanation:
tala it is also called myopia lekhnu hai
Äni Arko MA it is also called hypermetropia .
Match the term with its description.
Match Term Definition
Chloroplast A) A green pigment present in all plants that absorbs light to provide energy for photosynthesis
Chlorophyll B) An organelle that contains chlorophyll and in which photosynthesis takes place
Energy C) A capacity to do work that can produce physical changes within living and nonliving systems
Glucose D) A type of sugar that is produced during photosynthesis to store chemical energy
Answer:
Chloroplast: An organelle that contains chlorophyll and in which photosynthesis takes place
Chlorophyll: A green pigment present in all plants that absorbs light to provide energy for photosynthesis
Energy: A capacity to do work that can produce physical changes within living and nonliving systems
Glucose:A type of sugar that is produced during photosynthesis to store chemical energy
hope it helps!
Answer: look at picture for the answer, and I showed that I got it right as well. It was worth 4 points and I got all 4. Brainiest please, if you don't mind <3
what is tetra atomic molecules?
Answer:
Explanation:
They are the molecules that are formed when four atoms chemically bond together.
Which statement about anabolism is true?
A. In anabolism, energy is released.
B. In anabolism, energy is absorbed.
C. In anabolism, energy is absorbed and then released.
O
D. In anabolism, energy is released and then absorbed.
Answer:
i would say B? Im sorry if im wrong
Explanation:
i think that because Catabolic reactions release energy, while anabolic reactions use up energy. Anabolism is the opposite of catabolism.
Answer:
B) In anabolism, energy is absorbed.
Why does forming bonds release energy? *
You have a stock solution of HNO3 with a concentration of 4.5 x 10^-4 M. However, you need 275 ml of a 2.50 x 10^-5 M solution. How much of the stock solution will you need?
Answer:
15.28 mL
Explanation:
From the question given above, the following data were obtained:
Molarity of stock solution (M₁) = 4.5x10¯⁴ M
Volume of diluted solution (V₂) = 275 mL
Molarity of diluted solution (M₂) = 2.5×10¯⁵ M
Volume of stock solution (V₁) needed =.?
The volume of the stock solution needed can be obtained by using the dilution formula as illustrated below:
M₁V₁ = M₂V₂
4.5x10¯⁴ × V₁ = 2.5×10¯⁵ × 275
4.5x10¯⁴ × V₁ = 0.006875
Divide both side by 4.5x10¯⁴
V₁ = 0.006875 / 4.5x10¯⁴
V₁ = 15.28 mL
Therefore, the volume of the stock solution needed is 15.28 mL
What is the molecular formula of a compound that is 51.02 % carbon, 13.80 % hydrogen, and 35.18 %
oxygen? The molecular mass is 88.0 g/mol.
Answer:
Molecular formula = C₄H₁₂O₂
Explanation:
Given data:
Percentage of hydrogen = 13.80%
Percentage of carbon = 51.02%
Percentage of oxygen = 35.18%
Molecular formula = ?
Solution:
Number of gram atoms of H = 13.80 / 1.01 = 13.6
Number of gram atoms of O = 35.18 / 16 = 2.2
Number of gram atoms of C = 51.02 / 12 = 4.25
Atomic ratio:
C : H : O
4.25/2.2 : 13.6/2.2 : 2.2/2.2
2 : 6 : 1
C : H : O = 2 : 6 : 1
Empirical formula is C₂H₆O.
Molecular formula:
Molecular formula = n (empirical formula)
n = molar mass of compound / empirical formula mass
Empirical formula mass = C₂H₆O = 46 g/mol
n = 88 / 46
n = 2
Molecular formula = n (empirical formula)
Molecular formula = 2 (C₂H₆O)
Molecular formula = C₄H₁₂O₂
Explain how scientists
came to the conclusion that “All living things are made of cells".
Answer:
scientist came to the conclusion that all living things are made of cells by con
Explanation:
what is the temperature in the fahrenheit?
what is the anwser to this question
Answer:
N/A
Explanation:
"what is the anwser to this question" Is Not Available because this no question.
Please like this.
The reaction of iron (III) metal with a solution of copper (II) sulfate releases iron ions into the solution through a single displacement reaction.
a. Determine the moles of iron ions produced in this reaction.
b. Name a soluble compound that could be added to precipitate all of the iron ions from the solution.
c. What mass of the soluble compound from part (c) is required to precipitate all of the iron ions you determined in part (b)? HINTs: determine a new chemical reaction with your soluble compound Fe2(SO4)3. Then, use the moles of Fe2(SO4)3 calculated in part (b)
Answer:
. Name a soluble compound that could be added to precipitate all of the iron ions from the solution.
Sodium Hydroxide.
when you burn wood in a campfire, ____ energy is converted to ____ and light energy.
Answer:
when you burn wood in a campfire, chemical energy is converted to heat and light energy.
Explanation :
When wood is burned stored potential energy ( in the form of chemical energy ) in the log is released due to heating by other excited atoms . This process is called combustion and requires presence of oxygen. So, combustion can be defined as a process which changes chemical energy into kinetic energy in the form of heat. In case of combustion an organic say wood in this case combines with oxygen present in the atmosphere to give off carbon dioxide, water and energy in the form of heat and light .
No one answers my Questions :(
Please help its my last one:
Name three sources of atmospheric carbon dioxide. (Write in complete sentences and be very detailed.)
This is science.
First and best answer gets 5 stars, a thanks, and a brainliest!
Doing this because I know I'm kickass at Chemistry.
One source would be human emissions. As humans, we use a lot of machines (like power plants) that produce large amounts of carbon dioxide into the atmosphere. The ocean also produces a lot of carbon dioxide via the evaporation cycle. Polluted waters eventually will go into the atmosphere. Volcanoes, even when not erupted, emit a lot of carbon dioxide as well. Dormant underground magma releases carbon dioxide through the Earth's pores, and even when a volcano erupts, it produces carbon dioxide as well.
Why do atoms form bonds or why do bonds form?
Answer:
Atoms form chemical bonds to achieve a full outer energy level, which is the most stable arrangement of electrons. A chemical bond is a force of attraction between atoms or ions
Explanation:
Someone please answer this...
Answer:
5446.8 J
Explanation:
From the question given above, the following data were obtained:
Mass (M) = 50 g
Initial temperature (T₁) = 70 °C
Final temperature (T₂) = 192.4 °C
Specific heat capacity (C) = 0.89 J/gºC
Heat (Q) required =?
Next, we shall determine the change in the temperature. This can be obtained as follow:
Initial temperature (T₁) = 70 °C
Final temperature (T₂) = 192.4 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 192.4 – 70
ΔT = 122.4 °C
Finally, we shall determine the heat required to heat up the block of aluminum as follow:
Mass (M) = 50 g
Specific heat capacity (C) = 0.89 J/gºC
Change in temperature (ΔT) = 122.4 °C
Heat (Q) required =?
Q = MCΔT
Q = 50 × 0.89 × 122.4
Q = 5446.8 J
Thus, the heat required to heat up the block of aluminum is 5446.8 J
What is the percent composition of Phosphorus in Li3PO3
Answer:
you will get 17.983 g of lithium for every 100 g of lithium phosphate.
Explanation:
69.7% is the percent by mass of Lithium in Li[tex]_3[/tex]PO[tex]_3[/tex]. A percent is obtained by multiplying the result by 100.
One approach to show the concentration for an element within a compound or component in a combination is as a mass percentage. The mass percentage is computed by dividing the total weight of the combination by the mass of each component and multiplying the result by 100%. The mass percent is calculated by dividing the mass that contains the compound and solute by the mass for the element or solute.
99.795g/mol = molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex]
6.94g/mol = molar mass of Li
mass percentage of Li=(molar mass of Li/molar mass of Li[tex]_3[/tex]PO[tex]_3[/tex])× 100
=(6.94/99.7)× 100
=69.7%
To know more about mass percentage, here:
brainly.com/question/32197511
#SPJ6
help me with cience for brainest:) its easy:)
Answer:
Stronger
And its science
Explanation:
Answer:
stronger for top.
weaker for bottom.
passed all sciences in freshman year :D
The figure below demonstrates what happens to white light when it passes through a prism. Which colors of lights has the highest energy? Red Yellow Greens Blues
Answer:
Blues
Explanation:
Colors of Rainbow => ROYGBIV
Red Orange Yellow Green Blue Indigo Violet
low energy => => => => => => => => => => high energy
low frequency => => => => => => => => => high frequency
long wavelengths => => => => => => => => short wavelengths
Note: All L's on the Left => low, low, long; other end are opposites.
A student is drinking a cup of hot chocolate as they sit by a campfire on a chilly evening. They know that the cup of hot chocolate transfers thermal energy to the surrounding air. The heated air over their cup of hot chocolate expands and rises and is replaced by cooler, denser air.
This method of energy transfer is —
Answer:
A student is drinking a cup of hot chocolate as they sit by a campfire on a chilly evening. They know that the cup of hot chocolate transfers thermal energy to the surrounding air. The heated air over their cup of hot chocolate expands and rises and is replaced by cooler, denser air.
This method of energy transfer is
Explanation:
Answer:
radiation
Explanation:
radiation is when an existing heat source spreads heat to its surroundings
Why are summer days longer than winter days on Earth?
A. During the summer, Earth's rotational axis is parallel to the Sun's rotational axis.
B. During the summer, Earth is at the point in its orbit when it is closest to the Sun.
C. The region of Earth experiencing summer rotates past the Sun more slowly than the region experiencing winter.
D. The region of Earth experiencing summer is tilted toward the Sun while the region experiencing winter is tilted away from the Sun.
PLEASE HELP ITS A TEST
Answer:
A. During the summer, Earth's rotational axis is parallel to the Sun's rotational axis.
Explanation:
Actually, though, the Earth is tilted 23.4 degrees! (A circle is 360 degrees.) This tilt is the reason that days are longer in the summer and shorter in the winter. The hemisphere that's tilted closest to the Sun has the longest, brightest days because it gets more direct light from the Sun's rays.
Plz mark me brainliest if correct :)
During summer days, north pole of earth is exposed to sun because ofthe tilt of earth's rotational axis. Thus, The region of Earth experiencing summer is tilted toward the Sun while the region experiencing winter is tilted away from the Sun.
What is summer?Summer is a season in earth. There are different seasons in earth namely, summer, winter, spring, autumn etc. These season are arising due the revolution of earth around sun.
The distance of different regions of earth from sun changes due to the revolution of earth. Thus heat gained by these regions will be different in different seasons.
The north pole in summer gains more heat and light energy because of tilt in the axis of earth is towards the sun. Hence, the day time will be longer in summer than the winter. In winter, the earth is relatively apart from sun and thus tilt is and gains less light and heat .
To find more on seasons, refer here:
https://brainly.com/question/19009677
#SPJ6
A student viewed the moon through binoculars one week after a new moon.Which image shows the phases of the moon that the students observed?
Answer:The answer is D
The image that shows the phase of the moon one ( 1 ) week after the new moon is ; ( Image G )
The quarter at which the moon will be one(1) week after the new moon is up in the sky is the first quarter. And at the first quarter the moon will be in its " waning gibbous " phase.
The waning gibbous phase is the stage in the new moon cycle where only one half ( 1/2 ) or 50% of the moon is lit and the moon will remain in this stage up until 21 days.
Hence we can conclude that the image that shows the phase of the moon one week after the new moon is Image G.
Learn more : https://brainly.com/question/21449386
State the law of multiple proportions.
Answer:
Law of Multiple proportion states that when two elements combine to form more than one compound, the mass of one element, which combines with a fixed mass of the other element, will always be ratios of whole numbers. For example, let us assume 2 molecules CO (carbon monoxide) and CO2(carbon dioxide).
Explanation:
The photo shows wires made of pure copper, an element
What would the smallest piece of copper be?
A. Copper atom
B. Mixture of different kinds of metallic elements
C. Copper molecule
D. Compound containing two or more elements
Answer:
B
Explanation:
I hope its right. I'm pretty sure.
Answer:
Explanation:
Copper Atom
Question 5 of 10
Two hydrogen atoms combine chemically with one oxygen atom to form
water. What is water?
O A. An atom
B. A molecule
O C. An element
O D. A mixture
what is the charge on a calcium (Ca) atom that contains 18e?
Answer:
Ca2+
Explanation:
Give two limitations of law of Constant Composition
Answer:
1.The law does not hold true if the different isotopes of the element are involved in making chemical compound.
2.The law is not applicable when elements combine in the same ratio but different compounds are formed.
Newton's first law of motion explains how
affects an object's motion. According to
Newton's first law, an obiect at rest will stay at
Answer:
rest until and unless an external force is applied.
Balance the chemical reaction for the combustion of methanol by adding the correct coefficients below
__CH3OH +__O2(little box)__CO2 +__H2O
Answer:
[tex]2~CH_3OH+3~O_2\rightarrow2~CO_2+4~H_2O\\[/tex]
The coefficients would be 2, 3, 2, and 4.
Explanation:
If we want to check this we would multiply the coefficient by each element. What we want is to have the same number of atoms on each side.
Reactant side:
# of carbon atoms: 2# of hydrogen atoms: 8# of oxygen atoms: 8Product side:
# of carbon atoms: 2# of hydrogen atoms: 8# of oxygen atoms: 8And that's it!
An 18.0 g piece of an unidentified metal was heated from 21.5 °C to 89.0 °C. If 789.75 J of heat energy was absorbed by the metal in the heating process, what was the identity
of the metal?
Answer: The metal is Calcium.
Explanation:
To calculate the specific heat of substance during the reaction.
[tex]q=m\times c\times \Delta T[/tex]
where,
q = heat absorbed = 789.75 J
c = specific heat of metal = ?
m = mass of substance = 18.0 g
[tex]\Delta T_f[/tex] = final temperature - initial temperature = [tex](89.0-21.5)^0C=67.5^0C[/tex]
Now put all the given values in the above formula, we get:
[tex]789.75J=18.0g\times c\times 67.5^0C[/tex]
[tex]c=0.65J/g^0C[/tex]
As specific heat is characteristic of each metal and thus the metal is calcium which has specific heat of [tex]0.65J/g^0C[/tex]
"You learned about mixtures, especially solutions and the factors that affect their makeup and properties. Why is it important to know the properties of both solutes and solvents when preparing a solution that is expected to meet a certain need?
Does this involve a chemical change or a physical change? Explain."
Can u pls help me
Answer:
its due to the solvents being factored. to be prepared for the solution you would need a chemical change as the solvents get factored so this will mean that it will have a chemical reaction. in this case its slightly different so it will be called a chemical change as 2 different chemicals change and evolve.
Explanation: