Which major product is formed when Br2 and H2O are added to 2-methylpropene to give the bromohydrin?

Answer:

The coins will turn green faster because chemical reaction speed up with higher temperatures

Copper coins turn green when exposed to water because the coins will turn green faster because reaction speeds up with higher temperatures.

The rate of a chemical reaction can be defined as the speed at which the products are formed from the reactants. The rate of a reaction gives information about the time frame under which a reaction can be finished.

The rate of reaction can be described as the speed of a chemical reaction at which reactants are transformed into products. Some chemical reactions are generally instantaneous, while some reactions take time to reach the final equilibrium. Pressure increases the concentration of gaseous reactants resulting in an increase in the rate of reaction.

The rate of reaction will increase with an increase in the temperature of the reaction as the reactant molecules get more kinetic energy and increase the number of collisions.

Therefore, copper coins will turn green faster because reactions speed up with higher temperatures.

Learn more about the rate of reaction, here:

brainly.com/question/13571877

#SPJ2

Answer:

OB: weathering

Explanation:

the cycle of heating and cooling causes stresses called thermal fatigue, this causes the material to break down. In hand, weathering is a physical and chemical process that causes rocks and minerals on the Earth's surface to break down and decompose. Therefore, this matches the process you have described.

Answer:

weathering fun way to imagen it: just imagen u saw ur worst enemie and pretende it is the rock and the wind and ice and water are ur best friends THEN BAM wind and ice and water(ur best friends) make the rock(worst enemie) to dust :D

Answer:

c. SP2

Explanation:

The image in the diagram below shows the structure of  NO₃⁻

Nitrogen is the central atom with the electronic configuration of 1s² 2s² 2p³.

So in its outermost shell, it has 3 electrons and the hybridization is sp²

However,

According to Hund's rule:

The ground state of Nitrogen is;    

1s²    2s²   2p³

↑↓     ↑      ↑  ↑  ↑

At the excited state when it is attached to 3 different oxygen ions, we have:

                1s²     2s²        2p⁵

O⁻ --->     ↑↓      ↑↓     ↑↓    ↑↓   ↑      

                1s²     2s²        2p⁵

O⁻ --->     ↑↓      ↑↓     ↑↓    ↑↓   ↑

                1s²     2s²        2p⁴

O⁻ --->     ↑↓      ↑↓     ↑↓    ↑   ↑

Thus, the 3 sp² orbital lies in a plane and form 3 N - O σ- bond and one π- bond.

Answer: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%. This is because 1-methylcyclohexene is the major product with the more stable carbocation intermediate and 3-methylcyclohexene is the minor product with the less stable carbocation intermediate.

Explanation: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%

Answer:

the heat energy is transformed to any kind of energy depending on what it's meant to be transformed to.

remember it cannot be destroyed so it's definitely transformed to some kinda energy

Answer:

Average weather conditions of a region over the long term

Explanation:

Climate is the long-term average of weather, typically averaged over a period of 30 years. More rigorously, it denotes the mean and variability of meteorological variables over a time spanning from months to millions of years.

Answer:

0.00883 mol

Explanation:

Let's consider the reduction reaction of gallium.

Ga³⁺(aq) + 3 e⁻ ⇒ Ga(s)

We can establish the following relationships:

The amount of Ga deposited using a current of 0.710 A that flows for 60.0 min is:

[tex]60.0min \times \frac{60s}{1min} \times \frac{0.710C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molGa}{3mole^{-}} = 0.00883 molGa[/tex]

Answer:

π = 7.33atm

Explanation:

Osmotic pressure is defined as the pressure that must be applied to stop the mass transfer when a semipermeable membrane separates it of pure water. The equation is:

π = M×R×T

Where P is osmotic pressure

M is molar mass = 0.30M

R is gas constant = 0.082atmL/molK

And T is absolute temperature = 25°C + 273.15 = 298.15K

π = 0.30M×0.082atmL/molK×298.15K

Osmotic pressure of human blood at 25 degree C or at absolute temperature is equal to 7.33 atm.

What is osmotic pressure?

It is defined as the minimum pressure exerted on the solution, which is required to stop the flow of pure solvent from low concentration to high concentration through the semi permeable membrane.

Osmotic pressure can be calculted as :

P = M × R × T

Where, P = Osmotic pressure

M = Molar mass = 0.30 M (given)

R = Universal gas constant = 0.082 atmL/molK

T = Absolute temperature 25 degree C = 25⁰C + 273.15 = 298.15 K

Putting all these values in the given equation, we get:

P = 0.30 × 0.082 × 298.15 = 7.33 atm

Hence, 7.33 atm is the osmotic pressure of blood at 25⁰C .

To know more about osmotic pressure, do visit below link:

https://brainly.com/question/4203774

Answer:

Single displacement reaction.

Explanation:

Hello!!

In this case, since the reaction between silver nitrate and copper metal is:

[tex]2AgNO_3(aq)+Cu(s)\rightarrow 2Ag(s)+Cu(NO_3)_2(aq)[/tex]

As silver was forming silver nitrate, due to the presence of copper, which has the capacity to displace silver out of the salt, we notice the formation of solid silver and a resulting copper (II) nitrate which is blue in aqueous solution.

Therefore, this is a single displacement reaction, because the the lonely copper displaced the silver.

Best regards!

Answer:

[tex]n_{H_2O}=3.0molH_2O\\\\n_{N_2}=1.0molN_2[/tex]

Explanation:

Hello!

In this case, for the described reaction we have:

[tex]2NH_3(g)+\frac{3}{2} O_2(g)\rightarrow N_2(g)+3H_2O(g)[/tex]

Which means there is 2:3/2 mole ratio between ammonia and oxygen and we use it to compute the consumed moles of ammonia by 13.0 moles of oxygen as shown below:

[tex]n_{NH_3}^{consumed \ by\ O_2}=13.0molO_2*\frac{2molNH_3}{\frac{3}{2}molO_2 } =17.33molNH_3[/tex]

However, since just 2.0 mol of ammonia is available, we infer it is the limiting reactant and the maximum amount of both nitrogen and water that can be produced is computed below:

[tex]n_{H_2O}=2.0molNH_3*\frac{3molH_2O}{2molNH_3} =3.0molH_2O\\\\n_{N_2}=2.0molNH_3*\frac{1molN_2}{2molNH_3} =1.0molN_2[/tex]

Best regards!

Answer: Atoms of carbon and hydrogen

Explanation:

Answer:

Of the main group elements, fluorine has the highest electronegativity (EN = 4.0) and cesium the lowest (EN = 0.79). This indicates that fluorine has a high tendency to gain electrons from other elements with lower electronegativities.

Explanation:

Answer:

The original concentration of the HCl is: 0.01925 M

Explanation:

Equation:

HCl+NaOH-------> NaCl+H₂O

Volume of NaOH added = 0.05 M

No of moles of NaOH = 15.4 mL [tex]x\frac{1 L}{1000 mL} x\frac{0.05 mol NaOH}{L}[/tex]

= 0.00077 mol NaOH

Then,

Volume of HCl solution = 40 mL x 1/1000 mL

= 0.0400 L

Therefore,

Concentration of HCl = 0.00077 mol/0.0400 L

= 0.01925 M

Now, to find the pH:

pH = -log₁₀[H⁺]

     = -log₁₀(2x10⁻⁶)

     = 5.7

Explanation:

The pressure will decrease but the volume remains constant

Answer:

The solar system speed and Milky Way speed should be switched

Explanation:

Answer:

Explanation:

The solar system speed and Milky Way speed should be switched

Answer:

Leeunwenhoek

Explanation:

Anton Von Leeunwenhoek was the first scientist to observe live cells and in greater details. He described spirogyra in the mid 15th century.

Answer:

Fraction of association = 0.01

pH = 11

Explanation:

A weak base, B, is in equilibrium with water as follows:

B(aq) + H2O(l) ⇄ BH⁺(aq) + OH⁻(aq)

Where Kb is defined as:

Kb = 1.00x10⁻⁵ = [BH⁺] [OH⁻] / [B]

Some B will react producing BH⁺ and OH⁻:

[BH⁺] = X

[OH⁻] = X

[B] = 0.100M - X

As Kb <<< [B] we can say:

[B] ≈ 0.100M

Replacing:

1.00x10⁻⁵ = [X] [X] / [0.100]

1.00x10⁻⁶ = X²

X = 1x10⁻³M = [BH⁺] = [OH⁻]

The fraction of association is [BH⁺] / [B] = 1x10⁻³M / 0.100M = 0.01

As [OH⁻] = 1x10⁻³M, pOH = -log[OH⁻] = 3

pH = 14- pOH

Answer:

Noble gases... (You already know...)

Explanation:

The right-most column of the periodic table contains atoms with full electron shells, also known as Noble Gases.

Hope this helped!

Answer:

Noble gases

Explanation:

The six elements listed in the last column of the table (Group 18) of the periodic table are collectively referred to as the noble gases. All of the noble gases have the maximum number of electrons possible in their outer shells (two electrons in helium’s outer shell, and eight electrons for all the others), making them stable.

Answer:

–156 °C

Explanation:

The following data were obtained from the question:

Initial temperature (T1) = –20 °C

Initial volume (V1) = 140 mL

Final volume (V2) = 65 mL

Final temperature (T2) =?

Pressure = constant.

Next, we shall convert –20 °C to Kelvin temperature. This can be obtained as follow:

T(K) = T(°C) + 273

Initial temperature (T1) = –20 °C

Initial temperature (T1) = –20 °C + 273 = 253 K.

Next, we shall determine the new temperature of the gas as follow:

Initial temperature (T1) = 253 K

Initial volume (V1) = 140 mL

Final volume (V2) = 65 mL

Final temperature (T2) =?

V1/T1 = V2/T2

140/253 = 65/T2

Cross multiply

140 × T2 = 253 × 65

140 × T2 = 16445

Divide both side by 140

T2 = 16445 /140

T2 = 117 K

Finally, we shall convert 117 K to celcius temperature. This can be obtained as follow:

T(°C) = T(K) – 273

T2 = 117 K

T2 = 117 K – 273

T2 = –156 °C

Thus, the new temperature of the gas is –156 °C

ANSWER: Things like salt, sugar and coffee dissolve in water. They are soluble. They usually dissolve faster and better in warm or hot water.

Answer:

solubility

Explanation:

Answer:

The elements that have the same number of energy levels or the orbitals.

Explanation:

They have he same number -- energy levels

Answer:

whats the question

Explanation:

Answer:

Calculate the average atomic mass of argon to two decimal places, given the following relative masses and abundances of each of the isotopes: argon-36 (35.97 amu; 0.337%), argon-38 (37.96 amu; 0.063%), and argon-40 (39.96 amu; 99.600%). ... So the atomic mass of Ar is 0.99639. 96 + 0.0006337. 96 + 0.00337*35.97 = 39.957.

Explanation:

hope this help

Answer: true

Explanation: Collection and analysis of data indicates that constructive forces include crustal deformation, faulting, volcanic eruption and deposition of sediment, while destructive forces include weathering and erosion.

Answer:

fou maybe

Explanation:

it was my answer hehe

Answer:2

Explanation:

Because it is

Answer:

1000

Explanation:

PLS GIVE BRAINLIEST

Answer:

0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.

Explanation:

Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.

To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:

Moles KHP -Molar mass: 204.22g/mol-:

0.198g * (1mol / 204.22g) = 0.0009695 moles KHP

Molarity:

0.0009695 moles KHP / 0.125L = 0.007756M KHP

NaOH reacts with KHP as follows:

NaOH + KHP → Na⁺ + KP⁻ + H₂O

That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:

0.0009695 moles NaOH reacts

In 27.80mL = 0.02780L the NaOH was contained. Molarity is:

0.0009695 moles NaOH / 0.02780L =

0.03488M NaOH

Moles of NaOH added will be "0.034".

According to the question,

→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]

By substituting the values, we get

                  [tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]

                  [tex]= 0.0077 \ M[/tex]

Let,

Now,

→            [tex]M_1 V_1 = M_2 V_2[/tex]

→ [tex]0.0077\times 125=M_2\times 27.8[/tex]

→                [tex]M_2 = 0.034 \ moles[/tex]

Thus the above answer is appropriate.

Learn more:

https://brainly.com/question/23931328

Answer:

1.092

Explanation:

Density = 1.0192 g/mL

oecific gravity = ?

Specific gravity is the ratio of a material's density with that of water.

The density of water at 4 degrees Celsius =  1 g/mL

Specific gravity = 1.0192 / 1 = 1.0192

Because specific gravity is a ratio, it has no dimension.