The chemical potassium bicarbonate is used in club soda for taste. it is made up of potassium, carbon, hydrogen and oxygen, this is an example of?

On examining the following order we can say that ethers and esters got switced.

Alkyl halides, saturated hydrocarbons, unsaturated hydrocarbons, ethers, esters, ketones, amines, alcohols, phenols, and acids are typically eluted from columns in the following order. Salts and polymeric substances frequently do not elute. From fastest to slowest elution, the following substances are roughly in order based on polarity: hydrocarbons, olefins, ethers, halocarbons, aromatics, ketones, aldehydes, esters, alcohols, amines, and acids.

Be aware that regardless of the polarity of the compounds, the more polar the solvent, the quicker the chemicals elute. This means that the order in which chemicals elute from a TLC or column cannot be altered by altering the solvent's polarity. So, on examining the following order we can say that ethers and esters got switced.

Learn more about ethers here:

https://brainly.com/question/18270903

#SPJ4

Answer:

C

Explanation:

because it is the only one that will give you an accurate answer.

Answer:

1) 433 (check screenshot)

2) 7.89

Answer:

C.) They both have equal charges.

Explanation:

Ignoring the signs, both a proton and electron have a charge of 1.

A proton has a greater magnitude of charge than an electron.

Both protons and electrons have charges, but the magnitudes of their charges are different. A proton carries a positive charge of +1 elementary charge, while an electron carries a negative charge of -1 elementary charge. The elementary charge is the fundamental unit of electric charge. Despite the opposite signs of their charges, the magnitudes are equal, and both charges have the same strength.

Therefore, when ignoring the sign of the charges and considering only their magnitudes, a proton has a greater magnitude of charge compared to an electron. The magnitude of the proton's charge is equal to that of the electron's charge. This is a fundamental property in the realm of electric charges, and it plays a critical role in various physical and chemical interactions, including the behavior of atoms, molecules, and electromagnetic forces.

To learn more about magnitude of charge, here

https://brainly.com/question/32470813

#SPJ3

The net force acting on water skier is 110.6N.

To find net force on a water skier we can use the formula,

net force = mass x acceleration

F = m x a

Given in equation,

F = ?

m = 79 kg

a = 1.4 m/s²

Putting the values,

F = 79 kg x 1.4 m/s²

F = 110.6N

The overall forces acting on an object is known as the net force. A mass can accelerate due to net force. A body is subject to another force whether it is at rest or in motion. When there are a lot of forces acting on a system, the term "net force" is used.

To know more about mass :

https://brainly.com/question/19694949

#SPJ9

They are neutrally charged

They typically do not conduct electricity in solid state

To know more about  molecular compounds   visit : https://brainly.com/question/23088724

#SPJ4

Answer: 1/2 X 2.1 kg X 30m/s^2 = 945 Joules

Explanation:

James chadwick discovered this particle neutron also neutrino called as is last of the subatomic particles to be characterized.

In 1932 james chadwick announced that the core also contained a new uncharged particle, which he called the neutron. neutron is also called neutrino he proved the existence of neutrons elementary particles devoid of any electrical charge. james chadwick was an English physicist who was awarded the 1935 Nobel prize in physics for his discovery of the neutron in 1932.

Know more about last of the subatomic particles

https://brainly.com/question/28537523

#SPJ4

Before washing the substance on the filter, petroleum ether is poured into an ice water bath to assist stop the product from dissolving.

Re-crystallization procedures only work based on the solubility properties of the compound of interest. The re-crystallization experiment cannot be performed using a solvent if the compound of interest is not soluble in it. For example, if I chose petroleum ether as my solvent instead of water, my recrystallization experiment will not work because acetanilide is not at all soluble in petroleum ether. In order for my recrystallization experiment to be successful, I need an efficient solvent for acetanilide. Acetanilide should only be dissolved by this solvent at temperatures above room temperature. Additionally, my solvent for acetanilide should be soluble for the impurities species at all temperatures. Since petroleum ether does not meet these requirements, the experiment will not be successful with petroleum ether.

Petroleum ether may not react with the product on the filter, however, the majority of organic molecules are generally non-polar and soluble in petroleum ether. Temperature lowers solubility Petroleum ether is cooled in an ice water bath to stop the product from dissolving in the solvent.

Learn more about ether here:

https://brainly.com/question/20772030

#SPJ4

Chemistry careers range in nature, pay, and educational requirements;

Chemical analyst

An analytical chemist analyses the composition and quantity of substances as well as how these elements may behave and interact with one another.

Germany is the #1 destination for chemistry students looking to study abroad since it is known for its accommodating attitude toward foreign students. Due to Germany's dominance in Europe's chemical industry, several institutions there offer specialised courses designed for graduates who want to get into the workforce.

MSc. which the industries desire. For their senior scientist positions, most firms demand Ph.D. and post-doctoral fellows.

Engineer, Chemical

Designing and creating new goods from raw materials and changing materials' states are specialties.

as in the production of plastic from oil. Chemical engineers may work in practically any business, helping to create cutting-edge, high-end goods like biocompatible implants and ultra-strong materials.

learn more about  Chemistry careers refer

https://brainly.com/question/17510922

#SPJ9

Sf3 , has a tetrahedral electron-pair geometry and a trigonal-pyramidal molecular geometry. the hybridization of the central sulfur atom is 5.

Hybridization in Chemistry is defined as concept of mixing two atomic orbitals to give rise to a new type of hybridized orbitals. This intermixing usually results in formation of hybrid orbitals having entirely different energies, shapes, etc. The atomic orbitals of same energy level mainly take part in hybridization. However, both the fully filled and half-filled orbitals can also take part in this process, provided they have equal energy.

On the other hand, we can say that concept of hybridization is an extension of the valence bond theory and it helps us to understand the formation of bonds, bond energies and bond lengths.

Redistribution of energy of orbitals of individual atoms to give orbitals of equivalent energy happens when two atomic orbitals combine to form a hybrid orbital in a molecule. This process is called hybridization.  During process of hybridization, atomic orbitals of comparable energies are mixed together and mostly involves the merging of two ‘s’ orbitals or two ‘p’ orbitals or mixing of an ‘s’ orbital with a ‘p’ orbital as well as ‘s’ orbital with a ‘d’ orbital. The new orbitals thus formed are known as the hybrid orbitals. More significantly, hybrid orbitals are quite useful in the explaining atomic bonding properties and molecular geometry.

Here is a formula to find the hybridization:

(V+M-C+A)/2

(6+3–0+1)/2 = 5

Hybridization: sp3d

Geometry: Trigonal Bipyramidal

Shape: T-shaped

V is the valence electrons of the central atom.

M is the number of monovalent atom (which makes single bond with central atom).

C and A are number of the cation and the anion.

To know more about hybridization visit: https://brainly.com/question/14140731

#SPJ4

The more abundant isotope of manganese is Mn-54 because the average atomic mass of manganese is 54.938 amu.

The term isotopes refers to the fact that atoms of an element are not exactly alike. The atoms of an element has the same atomic number (which is the signature of the element) but not the same mass number. The mass number of the element has to do with the number of neutrons.

Now we know that the atomic mass of elements is not a whole number because of the existence of isotopes. The relative atomic masses is obtained as the sum of the products of the atomic mass and the relative abundance of each isotope.

The more abundant isotope of manganese is Mn-54 because the average atomic mass of manganese is 54.938 amu.

The reason why the relative atomic mass of the carbon atom is  12.011 in the periodic table of the elements is because this is the weighted average of the masses of all the isotopes of carbon,

Learn more about isotopes:https://brainly.com/question/11680817

#SPJ1

If the solutions of NaBr and Hg(NO₃)₂ are mixed, there will be one precipitation reaction.

The precipitation reaction of the given reaction is

 NaBr + Hg(NO₃)₂ ⇒ HgBr₂ + NaNO₃.

Learn more about precipitation reaction with the given link

https://brainly.com/question/24158764

#SPJ4

Amines in order of decreasing water solubility, putting the most soluble amine first is 2, 1, 3.

What is the solubility of amine in water?

Hydrogen bonding between water molecules and lower aliphatic amines are possible. These amines are therefore water soluble.

The molar mass of amines increases with an increase in the size of the hydrophobic alkyl component. Its solubility in water is often reduced as a result. Higher amines cannot be dissolved in water. Alcohol, benzene, and ether are examples of organic solvents that easily dissolve amines.

To learn more about solubility of amines click the given link

https://brainly.com/question/19738583

#SPJ4

Answer:

The Moon has a diameter of 2,159 miles (3,476 kilometers) and is about one-quarter the size of Earth. The Moon weighs about 80 times less than Earth.

Explanation:

In order for the ship to float, the volume of the ship must be equal to or greater than  50,000,000 cm³.

According to the principle of floatation, a body will float in a liquid if it displaces a weight of liquid equal to its own weight.

Therefore, for the ship to float in water, it must displace a weight of water at least equal or greater than its own weight.

Considering the data given:

The density of steel = 8.0g/cm³

the density of water is 1.0 g/cm³

the mass of steel used for the ship = 50,000 kg

Based on the principle of floatation, mass of water to be displaced is equal to the mass of the ship.

Mass of water to be displaced = 50000 kg

Mass of water to be displaced in g = 50,000,000 g

Volume of 50000000 g of water = 50,000,000 g * 1.0 g/cm³

Volume of 50000000 g of water =  50,000,000 cm³

Therefore, volume of the ship must be equal to or greater than 50,000,000 cm³ for the ship to float.

Learn more about principle of floatation at: https://brainly.com/question/17032479

#SPJ1

Discoveries were made by j. j. thomson, henri becquerel, and lord rutherford.

What is Dalton's atomic model?

John Dalton, an English physicist and chemist, proposed the atomic hypothesis in 1808 as a scientific theory about the composition of matter. It claimed that tiny, indivisible particles called "atoms" make up all substance.

Almost all of chemistry at the time could be explained by Dalton's atomic model, a relatively straightforward combinatorial concept that paved the way for later advancements and advances in this and many other scientific domains. Postulates of the Dalton Model

Modern atomic theory and the discovery of the electron and proton were made possible by Thomson's cathode ray discharge experiment and Rutherford's scattering experiment.

Dalton's concept was groundbreaking at the time and provided a wealth of information for young chemists to study. Many people contributed to the modification of the Atomic theory following Dalton, including Chadwick, JJ Thompson, Ernest Rutherford, Niels Bohr, and others. Later, Rutherford worked on the model to find the nucleus while JJ Thompson made the electron discovery.

To learn more about Dalton's atomic model from the given link below,

https://brainly.com/question/15507302

#SPJ4

The concentration or Molarity of bromide ion in the sample solution is 0.077 M.

In the given question,

0.361 g AgBr × (1 mol AgBr/187.77 g AgBr) × (1 mol Br⁻/1 mol AgBr) × (80.0 g Br⁻/1 mol Br⁻) = 0.1536 g Br⁻

0.1536 × (1 mol Br⁻/80.0 g Br⁻) = 0.00192 mol

Molarity = 0.00192  mol/0.025 L = 0.077 M

Learn more about Molarity with the given link

https://brainly.com/question/8732513

#SPJ4

Acetylcholinesterase equilibrium equation is Ag2CO3(s) <---> 2 Ag+(aq) + CO32-(aq)

Following the transmission of information between two nerve cells or neurons, the neurotransmitter acetylcholine is hydrolyzed by the enzyme acetylcholine esterase. Choline and acetate result from the breakdown of acetylcholine (also called acetic acid). Acetate will permeate the presynaptic cell's membrane and choline will travel through it to allow for the reuse of the components.

In order for a muscle cell to contract, acetylcholine transmits a signal from a nerve cell to its receptors. A breakdown of the acetylcholine is then performed to prevent misunderstanding with brand-new neurotransmitters.

Due to their potent acetylcholinesterase inhibitory properties (see parasympathomimetic), many nerve agents and neurotoxins have the ability to constantly induce the contraction of muscle cells. This can cause death when consumed in big numbers.

To learn more about Acetylcholinesterase  from he given link:

https://brainly.com/question/6148688

#SPJ4

Explanation:

Two main ways, free elections, casting your vote for the candidate supporting your goals. Second, Lobbying the sitting gov.

Try 25% ethyl acetate to see the results, this is because adding more ethyl acetate will increase the polarity and the compounds get easily separated.

In TLC, the polarity between the stationary phase and mobile phase is the basis for mixture separation. In accordance with the "like dissolves like" principle, polar substances can only dissolve in other polar substances, while non-polar substances may only dissolve in other non-polar substances.

Consequently, when two compounds with different levels of polarity are present, the more polar molecule interacts with silica more strongly and is, therefore, better able to displace the mobile phase from the accessible binding sites. The less polar compound thus travels higher up the plate (resulting in a higher Rf value).

However, changing the mobile phase to a more polar solvent or a mixture of solvents improves binding to the polar plate and thereby displaces solutes from it, causing all compounds on the TLC plate to rise higher up the plate. It is a prevalent belief that although "weak" eluents hardly move the examined compounds, "strong" eluents drive them up the plate.

Therefore, all compounds move longer and have a larger Rf when a mobile phase is made more polar than it was originally.

Since hexane has a non-polar property while ethyl acetate has a polar property. As a result, adding 35% ethyl acetate will enhance the polarity, making it easier to separate the compounds.

For more information on ethyl acetate click on the link below:

https://brainly.com/question/18993490

#SPJ4

The concentration of iron in ppb is 5.2 ppb

In atmospheric chemistry, PPM( parts per million) and PPB( parts per billion) units are used to express the concentration of gases. PPB stands for parts per billion, while PPM stands for parts of gas per million parts of air.

2.6 × 10⁻⁶ grams of iron in 500 ml of water.

Now, converting milliliter into liter:

500 mL = 500 mL × ( 1L / 1000 mL ) = 0.5 L

Now for ppm, mass must be in mg.

2.6 × 10⁻⁶ grams = 2.6 × 10⁻⁶ grams × ( 1000 mg / 1 grams ) = 2.6 × 10⁻³ mg

Then, the concentration of iron in ppm will be:

2.6 × 10⁻³ mg / 0.5 L = 5.2 × 10⁻³ ppm

Now, 1 ppm = 1000 ppb

Therefore,

5.2 × 10⁻³ ppm × 10³ = 5.2 ppb

Learn more about concentration here:

brainly.com/question/17206790#:~:text=15%20people%20helped-,Answer%3A,either%20solvent%20or%20total%20solution.

#SPJ4

collisions between the gas particles and the walls of the container.

What is kinetic molecular theory?

The assumption that matter is made up of microscopic particles that are always in motion forms the foundation of the kinetic-molecular theory, which explains the states of matter. The observable characteristics and behaviours of solids, liquids, and gases are explained by this theory. We can better comprehend why matter exists in different stages (such as solid, liquid, and gas) and how it can transition from one stage to another thanks to the kinetic theory of matter. One may also think about various properties of matter using the kinetic theory of matter.

Therefore,

According to the kinetic molecular theory, where does the pressure exerted by a gas in a container come from collisions between the gas particles and the walls of the container.

To learn more about kinetic molecular theory from the given link:

https://brainly.com/question/134712

#SPJ4

The volume of water at 30°C  will be more than the volume of water at 20 °C  because of the property of thermal expansion.

We generally observe that objects around us expand on heating.

Expansion due to heating is known as thermal expansion. It is of the following 3 types-

When a liquid like water is heated from a lower temperature to  a higher temperature its volume expands which means that it undergoes volume expansion.

Thus, The volume of water at 30°C will be more than the volume of water at 20°C  because of the property of thermal expansion.

To know more about "thermal expansion", refer to the following link:

https://brainly.com/question/14092908?referrer=searchResults

#SPJ4

The percent by weight (w/w%) of sugar in soda : 9.459 %

To find the percentage the given data's are:

mass of sugar = 35 g

total mass = 370 g

Solution for the given values are,

%weight = (mass of solute : mass of solution) x 100%

Mass of solute = Mass of sugar = 35 grams

Mass of solution = Mass of ( solvent + solute) = water + sugar = 370 grams

The percent weight of sugar in soda :

= (35 : 370) x 100%

= 0.0945945

= 9.459 %

Therefore, the percent by weight (w/w%) of sugar in soda : 9.459 %

Learn more about percentage by weight,

https://brainly.com/question/21276882

#SPJ4

Consequently, the compound and empirical formula will be:

Methanediamine, CH₃N.

How to determine the mass of Carbon

Mass of CO₂ = 53 mg

Molar mass of CO₂ = 44 g/mol

Molar of C = 12 g/mol

Mass of C =?

Mass of C = (12 / 44) × 53

Mass of C = 14.45 mg

How to determine the mass of H

Mass of H₂O = 32.6 mg

Molar mass of H₂O = 18 g/mol

Molar of H = 2 × 1 = 2 g/mol

Mass of H =?

Mass of H = (2 / 18) × 32.6

Mass of H = 3.62 mg

How to determine the mass of N

Mass of compound = 35 mg

Mass of C = 14.45 mg

Mass of H = 3.62 mg

Mass of N =?

Mass of N = (mass of compound) – (mass of C + mass of H)

Mass of N = 35 – (14.45 + 3.62)

Mass of N = 16.93 mg

How to determine the empirical formula

C = 14.45 mg

H = 3.62 mg

N = 16.93 mg

Empirical formula =?

Divide by their molar mass

C = 14.45 / 12 = 1.204

H = 3.62 / 1 = 3.62

N = 16.93 / 14 = 1.209

Divide by the smallest

C = 1.204 / 1.204 = 1

H = 3.62 / 1.204 = 3

N = 1.209 / 1.204 = 1

Thus, the empirical formula of the compound is CH₃N

An empirical formula is a compound's chemical formula that only specifies the ratios of the elements it contains and not the precise number or arrangement of atoms. The element in the compound with the lowest whole number ratio would be this one.

An empirical formula is used to indicate the simplest whole-number ratio of the various atoms in a molecule.

The precise number of various atom types present in a compound's molecule is indicated by the molecular formula.

Empirical formulae are beneficial since figuring out the molecular formula can be immensely aided by knowing the relative amounts of each constituent in a molecule.

To learn more about empirical formula from the given link:

brainly.com/question/14044066

#SPJ4

None of the above.

Since none of the given option is a chemical property, rather all of them are physical method of separation and physical methods do not require a chemical change.

Solubility- It is a physical property because it is easily discernible through observation and does not alter the substance's chemical makeup. For instance, salt is still salt when it dissolves in water.

Evaporation - The chemical composition of a liquid does not change when it evaporates. The only alteration is a phase shift brought on by pressure and temperature. Evaporation, or the phase transition from liquid to gas, is a physical change as a result.

Filtration - Filtration is a physical separation procedure that uses a filter medium with a complicated structure that only allows fluid to pass through it to separate solid particles and liquid from a combination.

Therefore, neither new nor broken chemical bonds are created or broken during the separation. During the separation, bonds are severed or strengthened.

To learn more about separation of mixture refer- https://brainly.com/question/2125632

#SPJ9