Answer:
Introduction
As a diligent student of chemistry, you will likely encounter tons of reactions that occur in aqueous solution (perhaps you are already drowning in them!). When ions are involved in a reaction, the equation for the reaction can be written with various levels of detail. Depending on which part of the reaction you are interested in, you might write a molecular, complete ionic, or net ionic equation.
Definitions of molecular, complete ionic, and net ionic equations
A molecular equation is sometimes simply called a balanced equation. In a molecular equation, any ionic compounds or acids are represented as neutral compounds using their chemical formulas. The state of each substance is indicated in parentheses after the formula. [Huh?]
Let's consider the reaction that occurs between \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text. When aqueous solutions of \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text are mixed, solid \text{AgCl}AgClstart text, A, g, C, l, end text and aqueous \text{NaNO}_3NaNO
3
start text, N, a, N, O, end text, start subscript, 3, end subscript are formed. Using this information, we can write a balanced molecular equation for the reaction:
\text{AgNO}_3(aq) + \text{NaCl}(aq) \rightarrow \text{AgCl}(s) + \text{NaNO}_3(aq)AgNO
3
(aq)+NaCl(aq)→AgCl(s)+NaNO
3
(aq)start text, A, g, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis, plus, start text, N, a, C, l, end text, left parenthesis, a, q, right parenthesis, right arrow, start text, A, g, C, l, end text, left parenthesis, s, right parenthesis, plus, start text, N, a, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis
[What kind of reaction is this?]
If we could zoom in on the contents of the reaction beaker, though, we wouldn't find actual molecules of \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, or \text{NaNO}_3NaNO
3
start text, N, a, N, O, end text, start subscript, 3, end subscript. Since \text{AgNO}_3AgNO
3
start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, and \text{NaNO}_3NaNO
3
start text, N, a, N, O, end text, start subscript, 3, end subscript are soluble ionic compounds, they dissociate into their constituent ions in water. For example, \text{NaCl}NaClstart text, N, a, C, l, end text dissociates into one ion of \text{Na}^+Na
+
start text, N, a, end text, start superscript, plus, end superscript for every ion of \text{Cl}^-Cl
−
start text, C, l, end text, start superscript, minus, end superscript; these ions are stabilized by ion-dipole interactions with the surrounding water molecules. [I don't get it!]
Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.
Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.
Sodium chloride dissociates into sodium and chloride ions in water, and these ions become solvated by the highly polar water molecules. Image credit: "Salts: Figure 1" by OpenStax Anatomy and Physiology, CC-BY-NC-SA 4.0.
From the molecular formula, we can rewrite the soluble ionic compounds as dissociated ions to get the complete ionic equation:
\text{Ag}^+(aq) + \blueD{{\text{NO}_3}^-(aq)} + \maroonD{\text{Na}^+(aq)} + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s) + \maroonD{\text{Na}^+(aq)} + \blueD{{\text{NO}_3}^- (aq)}Ag
+
(aq)+NO
3
−
(aq)+Na
+
(aq)+Cl
−
(aq)→AgCl(s)+Na
+
(aq)+NO
3
−
−
(aq)
+
Na
+
(aq)
+Cl
−
(aq)→AgCl(s)+
Na
+
(aq)
+
NO
3
−
(aq)
Imformation you find on the periodic table
Answer:
Within each element square, information on the element's symbol, atomic number, atomic mass, electronegativity, electron configuration, and valence numbers can be found. At the bottom of the periodic table is a two row block of elements that contain the lanthanoids and actinides.
Explanation:
The pressure exerted by the atmosphere at sea level is 14.7 Libs per square inch how many pounds of force are pressing on a rectangle with an area of 76.3cm^2
Pounds of force pressing on a rectangle : F = 173.86 lbs
Further explanationGiven
P at sea level = 14.7 lbs/in²
Area of rectangle : A = 76.3 cm²
Required
Pounds of force
Solution
P = F/A
F= P.A
Conversion :
1 cm² = 0.155 in²
76.3 cm² = 11.827 in²
Input the value :
F = 14.7 lbs/in² x 11.827 in²
F = 173.86 lbs
Questlon 23 of 30
What is the term for a large group of people with similar characteristics such
as educational background and income level?
A. An interest group
B. A social class
C. A social culture
O D. A political party
SUBMIT
Identify the two ways that rocks are broken down into smaller pieces?
A
abrasion and erosion
B
deposition and erosion
C
physical weathering and deposition
D
physical weathering and chemical weathering
answer pleaseeeeeeeee i only have one minute
Answer:
A or C
Explanation:
Answer: It is D.
Explanation: Edge 2021
which toxic gas is released in incomplete combustion?
Answer:
Incomplete combustion produces carbon monoxide (CO), a toxic gas.
Explanation:
Combustion is the rapid chemical reaction of oxygen in the air or direct oxygen, which is defined as oxidizer, with the different elements that make up the fuel (mainly carbon (C) and hydrogen (H)). These chemical reactions release energy producing local increases in temperature, which causes a flow of heat to the outside.
In other words, on the one hand you have the fuel, which is the substance that oxidizes and that you can find in a solid, liquid or gaseous state and which is made up mostly of carbon and hydrogen.
The oxidizer, for its part, is the substance that oxidizes the fuel, and it is generally the oxygen found in the air.
Certain amounts of oxidizer and fuel must come into contact for combustion to occur.
Incomplete combustion occurs when part of the fuel does not fully react. Incomplete combustion produces carbon monoxide (CO), a toxic gas.
Which is a characteristic of a solution?
Its particles scatter light.
Its particles are evenly distributed.
Its particles settle out.
It has large suspended particles.
Answer:
Its particles are evenly distributed.
Explanation:
Solutions are homogenous mixtures of solutes and solvents. In a solution the solute particles are evenly distributed in the solvent.
Here are some characteristics of solutions:
The size of the particles is small The particles do not settle on standingThe particles pass through ordinary filter papersThe particles pass through permeable membranesThe particles are not visible with microscope or the naked eyes. They are clear and may have a color.A characteristic of a solution is that its particles are evenly distributed.
What are solutions?A characteristic of a solution is that its particles are evenly distributed. In a solution, the solute (substance being dissolved) is uniformly distributed and mixed with the solvent (the substance doing the dissolving) at the molecular or ionic level.
The particles of the solute become thoroughly dispersed and do not settle out over time. Solutions are generally clear and do not scatter light, unlike suspensions or colloids which may exhibit light scattering due to the presence of larger particles.
More on solutions can be found here: https://brainly.com/question/30665317
#SPJ6
My question my question
H2O as an oxidant only
Further explanationGiven
Reaction
2 Na + 2 H2O → 2 NaOH + H2
Required
The function of water in the equation
Solution
Water : oxidizing agent
Na : reducing agent
Na⁰ → Na⁺ (oxidation)
H⁺- → H⁰ (reduction)
Acids and bases according to Bronsted-Lowry
Acid = donor (donor) proton (H⁺ ion)
Base = proton (receiver) acceptor (H⁺ ion)
If water is acting as an acid it should only give 1 H +, so that becomes:
H₂O (l) ⇔ OH⁻ (aq) not H₂
what three things might influence a slide when conditions are right?
Answer:
3
Explanation:
The three things that can affect a condition to enforce a slide is friction, weight, and slope of an area. Solutions that can make flow easily are those that can create less friction depending on the condition of an environment where it is present.
A canister containing air has a volume of 85 cm3 and a pressure of 1.45 atm when the tenoerature is 310 k. What is the pressure when the volune is increased to 180 cm3 and the temeprarje is reduced to 280 k?
Answer:
Pressure = 0.62 atm
Explanation:
[tex]V_{1}[/tex] = 85 [tex]cm^{3}[/tex], [tex]P_{1}[/tex] = 1.45 atm, [tex]T_{1}[/tex] = 310 K, [tex]V_{2}[/tex] = 180 [tex]cm^{3}[/tex], [tex]T_{2}[/tex] = 280 K.
Applying the general gas law,
[tex]\frac{P_{1} V_{1} }{T_{1} }[/tex] = [tex]\frac{P_{2} V_{2} }{T_{2} }[/tex]
[tex]\frac{1.45*85}{310}[/tex] = [tex]\frac{P_{2}*180 }{280}[/tex]
[tex]P_{2}[/tex] = [tex]\frac{1.45*85*280}{180*310}[/tex]
= [tex]\frac{34510}{55800}[/tex]
= 0.62
[tex]P_{2}[/tex] = 0.62 atm
The pressure when the volume is increased and the temperature reduced to the given values is 0.62 atm.
What is homologous series. write the example.
Homogeneous mixtures have components that are unevenly spaced throughout true or false
Answer:
False
Explanation:
Mixtures are impure substances.
There are two types of mixtures based on the number of coexisting phases.
Homogeneous mixtures have their constituents existing in one single phase. The components are evenly spaced.
Heterogeneous mixtures have their constituents existing in at least two different phases. Therefore, they are unevenly spaced due to the phases present within the mixture.
A solution was diluted 1/40, and the final concentration was 20%. What was the original concentration?
The original concentration : 800%
Further explanationGiven
Diluted 1/40
Final concentration 20%
Required
The original concentration
Solution
Dilution is the process of adding solvent to get a more dilute solution.
The moles(n) before and after dilution are the same.
Can be formulated :
n₁ = n₂
M₁.V₁ = M₂.V₂
diluted 1/40(dilution factor)⇒ V₁/V₂=1/40⇒V₂/V₁=40
M₂ = 0.2(20%)
Input the value for M₁ :
M₁=M₂ x (V₂/V₁)
M₁ = 0.2 x 40
M₂ = 8(800%)
=
Classify each of the observed changes according to whether or not they are likely to represent evidence that a chemical reaction is occurring when performing an experiment.
May be evidence of a chemical reaction Not evidence of a chemical reaction
a solution color becoming less intense
due to dilution
bubbles (sas formation) changes in color
precipitation
explosion or fire
Answer Bank
a solid liquifying change in temperature solution colors mixing
Answer:
a solution color becoming less intense due to dilution- is not an evidence of a chemical reaction
bubbles (gas formation) - evidence of a chemical reaction
explosion or fire - evidence of a chemical reaction
changes in color- evidence of a chemical reaction
precipitation- evidence of a chemical reaction
changes in temperature - evidence of a chemical reaction
a solid liquifying - is not an evidence of a chemical reaction
solution colors mixing - is not an evidence of a chemical reaction
Explanation:
A chemical change is not easily reversible and yields new substances. It is often accompanied by a loss or gain of heat.
In the answer section, i have shown some evidences that lead us to conclude that a chemical reaction has taken place. The occurrence of a chemical change often goes with the formation of new substances as earlier stated and any of these signs may accompany the process.
For instance, when a metal is dropped in dilute acid solution, bubble of hydrogen gas indicates that a chemical reaction has taken place.
What is the empirical formula of a compound whose percentage composition is found to be 62.60% lead, 8.40% nitrogen, and 29.0% oxygen?
Answer:
PbN₂O₆
Explanation:
Empirical formula is the simplest formula of a compound.
To find the empirical formula, we use the system below:
Lead Nitrogen Oxygen
Percentage
Composition 62.6 8.4 29
Molar mass 207.2 14 16
Number of
Moles 62.6/207.2 8.4/14 29/16
0.302 0.6 1.813
Divide by the
smallest 0.30/0.302 0.6/0.302 1.813/0.302
1 2 6
Empirical formula is PbN₂O₆
The empirical formula of the compound containing 62.60% lead, 8.40% nitrogen, and 29.0% oxygen is PbN₂O₆ or Pb(NO₃)₂
From the question given above, the following data were obtained:
Lead (Pb) = 62.60%
Nitrogen (N) = 8.40%
Oxygen (O) = 29.0%
Empirical formula =?The empirical formula of the compound can be obtained as illustrated below:
Divide by their molar mass
Pb = 62.60 / 207 = 0.302
Nitrogen (N) = 8.40 / 14 = 0.6
Oxygen (O) = 29.0 / 16 = 1.8125
Divide by the smallest
Pb = 0.302 / 0.302 = 1
Nitrogen (N) = 0.6 / 0.302 = 2
Oxygen (O) = 1.8125 / 0.302 = 6
Thus, the empirical formula of the compound is PbN₂O₆ or Pb(NO₃)₂
Learn more: https://brainly.com/question/14674359
An increase in aurora activity on Earth could be related to what activity on the Sun?
O A decrease in prominence
B decrease in solar Fares
Oc decrease in speed of solar wind
D increase in speed of solar wind
E increase in sun spots
Answer:
D.
Explanation:
INCREASE OF SOLAR WINDS When the sun is more active
Which of the below elements are part of a group? Feel free to use the periodic table.
A. H, He, O, C
B. Be, Mg, Ca, Sr
C. Li, Be, C, O
D. H, Li, Na, Mg
Answer:
B. Be, Mg, Ca, Sr
Explanation:
Be, Mg, Ca, Sr are parts of the alkaline Earth metal family/group. So they are the second most reactive elements following behind alkali metals. Furthermore, Be, Mg, Ca, Sr all have 2 valence electrons that lose them to form cations. They have low melting points, low boiling points, can conduct electricity, have high malleability and ductility.
Hope it helped!
How much volume (in cm3) is gained by a person who gains 12.3 lb of pure fat?
Answer:
So we are given with the mass while we are asked for the amount of volume. So this means, we must need an information on the density. From literature, the density of human fat is 0.918 g/cm³. Convert grams to lb by the conversion that 1,000 g = 2.2 lbs.
Density = 0.918 g/cm³ * (2.2 lbs/1,000 g) = 0.0020196 lb/cm³
Volume = Mass/Density = 12.2 lb / 0.0020196 lb/cm³
Volume = 6,040.8 cm³
How can your knowledge of acids and bases
help you approach this problem to keep your soil
viable?
HELP NOW
Answer:
How can we make use of acids or bases to remove heavy metals from soils? We can remove heavy metals from soil by adding acid and catching the solution that drains through. Acids can react with metals turning metalic compounds which can be dissolved by water and washed away. Improve crop yields?
Explanation:
How do the percent compositions for C3H6 and C4H7 compare?
A. They are the same
B. C4H8 has a higher percentage of carbon than C3H6.
C. C4H8 has a higher percentage of hydrogen than C3H6.
D. none of the above
A. They are the same
Further explanationGiven
C3H6 and C4H8
Required
The percent compositions
Solution
C₃H₆(MW = 42 g/mol)%C = 3.12/42 x 100% = 85.71%
%H = 6.1/42 x 1005 = 14.29%
C₄H₈(MW=56 g/mol)
%C = 4.12/56 x 100% = 85.71%
%H = 8.1/56 x 100%=14.29%
So they are the same, because mol ratio of C and H in both compounds is the same, 1: 2
the gravitational force between two objects depends on the distance between the objects and each object?
Answer:
Gravitational force between two objects depends on: a. The weight of the objects c. The mass of each object b. The distance between the objects d. Both b and c Please select the best answer from the choices provided A B C D
✓d
The data below shows the change in concentration of dinitrogen pentoxide over time, at 330 K, according to the following process.
2N2O5(g) = 4NO2(g) + O2
[N2O5] Time (s)
0.100 0.00
0.066 200.00
0.044 400.00
a) Find the rate of disappearance of N2O5 from t=0 s to t=200s
b) Find the rate of appearance of NO2 from t=0 s to t =200s
Answer: a) [tex]1.7\times 10^{-4}[/tex]
b) [tex]3.4\times 10^{-4}[/tex]
Explanation:
The reaction is :
[tex]2N_2O_5(g)\rightarrow 4NO_2(g)+O_2(g)[/tex]
Rate = Rate of disappearance of [tex]N_2O_5[/tex] = Rate of appearance of [tex]NO_2[/tex]
Rate = [tex]-\frac{d[N_2O_5]}{2dt}[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]
Rate of disappearance of [tex]N_2O_5[/tex] = [tex]\frac{\text {change in concentration}}{time}[/tex] = [tex]\frac{0.100-0.066}{200-0}=1.7\times 10^{-4}[/tex]
a) Rate of disappearance of [tex]N_2O_5[/tex] = [tex]-\frac{d[N_2O_5]}{2dt}[/tex]
Rate of appearance of [tex]NO_2[/tex] = [tex]\frac{d[NO_2]}{4dt}[/tex]
b) Rate of appearance of [tex]NO_2[/tex] = [tex]\frac{d[NO_2]}{dt}=2\times 1.7\times 10^{-4}}=3.4\times 10^{-4}[/tex]
A) Find the rate of disappearance of [tex]N_2O_5[/tex] from t = 0 s to t = 200s
[tex]Rate = \frac{1}{2}(\frac{-\delta N_2O_5}{\delta t})\\\\Rate = -\frac{1}{2}(\frac{0.066 - 0.100}{200 - 0})\\\\Rate = 8.5*10^{-5}[/tex]
B) Find the rate of appearance of [tex]NO_2[/tex] from t = 0 s to t = 200s
According to rate law,
[tex]\frac{1}{2}(\frac{-\delta N_2O_5}{\delta t}) = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\8.5*10^{-5} = \frac{1}{4}(\frac{\delta NO_2}{\delta t})\\\\\frac{\delta NO_2}{\delta t} = 4 * 8.5*10^{-5}\\\\Rate = 3.4*10^{-4}[/tex]
For more information on rate of disappearance
https://brainly.com/question/20708865?referrer=searchResults
What is the coefficient, subscript for V, and subscript for O in V2O5
Answer: Coefficient 0
subscript for V 2
subscript for O 5
Explanation: yes
There is no coefficient in V₂O₅ and the subscript of vanadium V is 2 and the subscript of oxygen is 5.
What is vanadium pentoxide ?Vanadium pentoxide is an ionic compound formed by donating electrons from the vanadium metal to oxygen. The chemical formula of vanadium pentoxide is V₂O₅.
The chemical formula of a compound is written in terms of the chemical symbol of each constituent elements and the number of their atoms. The number of atoms is written as subscript for the chemical symbols.
In V₂O₅, there are are 2 vanadium atoms and 5 oxygen atoms. Coefficients are numbers prior to the formula in reaction. Here there is no coefficient and the subscript for V is 2 and that of O is 5.
Find more on chemical formula:
https://brainly.com/question/29031056
#SPJ2
What is ATP? How does it provide energy
Can you please help me
Shure what you need help with
Which of the statements about liquids and gases are true?
Both liquids and gases have a definite volume.
O The particles in liquids and gases can move past one another
freely
Both liquids and gases have a definite shape.
Neither liquids nor gases have a definite shape.
Which of the statements about liquids and gases are true?
Answer:The particles in liquids and gases can move past one another freely.
#CARRYONLEARNING #STUDYWELLWhich of the statements about liquids and gases are true?
Choosing:Both liquids and gases have a definite volume.
The particles in liquids and gases can move past one another freely
Both liquids and gases have a definite shape.
Neither liquids nor gases have a definite shape.
Answer:The particles in liquids and gases can move past one another freely.
#READINGHELPSWITHLEARNING #CARRYONLEARNING #STUDYWELLAn ionic compound contains 2 potassium cations for every 1 oxygen anion. What is the chemical formula of the compound?
Answer:
Chemical formula of the compound = K₂O
Explanation:
Given:
Number of potassium cation = 2
Number of oxygen anion = 1
Cross valency
Symbol of potassium = k
Symbol of oxygen = o
So;
Chemical formula of the compound = K₂O
When performing a multiplication or division calculation, significant figures in the calculated result are dictated by the _____ of the measured numbers.
The calculated result should have ______ the measured number in the calculation with the fewest _______.
Answer:
fewest; the same significant figures with; measured numbers.
Explanation:
Without mincing words let us dive straight into the solution to the above question. In order to be able to use the significant figures properly one must know the rules attached to it uses. This is so, because they contributes to the precision of measurements.
When performing multiplication or division calculation, the number of significant figures in the answer[result] will be determined by the one with the smallest number of significant figure in the problem. Therefore, if we have 6.56 which is three[3] significant figures and 1.2 which is two[2] significant figures, then the number of significant figures will be two[2].
6.56 × 1.2= 7.872 = 7.9[ to 2 significant figures].
How many moles are in the following:
7.36 x 1024 of free Oxygen atoms
Answer: 12.2 moles
Explanation:
7.36x10^24/6.02214076x10^23 = 12.2 moles of free oxygen atoms
A dolphin travels a distance 20 miles up the coastline in 153 minutes. If 1 mile is equal to
1609 meters, then what is the dolphin's average speed in meters/second rounded to the
nearest tenth?
+/-
HELP ME PLEASE
Answer:
3.51m/s
Explanation:
Given parameters:
Distance = 20miles
Miles to meters:
1 mile = 1609m
20miles = 20 x 1609 = 32180m
Time = 153minutes
1 min = 60s
153min = 60 x 153 = 9180s
Unknown:
Average speed = ?
Solution:
To solve this problem;
Average speed = [tex]\frac{distance }{time taken}[/tex]
Average speed = [tex]\frac{32180}{9180}[/tex] = 3.51m/s
1. The following equation represents the reaction between sodium and water.
2Na(s) + 2H20(1) - 2NaOH(aq) + H2(g)
During this reaction, water is acting as ...
A)an acid and an oxidant
B)an acid and a reduc tant
C)an oxidant only
D)an acid only