Answer:
heterogeneous
Explanation:
I said so jit
rutherford called the region that deflected alpha particles
Answer:
Rutherford concluded that these particles were striking... a tiny region of positive charge. Rutherford called the region that deflected alpha particles... a nucleus. The total volume of the nucleus of an atom is... very small compared with the rest of the atom. Except for in the simplist type fo hydrogen atom, all nuclei consist of...
Explanation:
when using vacuum filtration which type of tubing is best?
Answer:
The filter flask and the vacuum trap consist of heavy-walled glassware. You should use thick-walled tubings as well. Normal tubing that you use as water hoses will collapse under vacuum.
For vacuum filtration, thick walled tubings are best as they can withstand the pressure which is applied during filtration.
What is vacuum filtration?It is a filtration technique which works faster .This is because water is suck out the air in the vacuum flask and Buchner funnel by flowing it through the aspirator.
Filter at the bottom separates the solids from the liquids.Solid residue at top of funnel can be easily dried. The filtration takes place effeciently in presence of vacuum .
There is a rubber conical seal which ensures that the apparatus is hermetically closed,maintains vacuum in apparatus and avoids physical points of stresses.
Vacuum filtration is faster than gravity filtration and is more efficient leading to purer liquid. It is of much importance in crystallization.
Learn more about vacuum filtration,here:
https://brainly.com/question/28503164
#SPJ2
Can two different substances have the same percent composition by mass?
Answer:
Although the terms mass percent and percent composition are used interchangeably, they are different terms. The mass percent refers to the percentage of a component in a mixture, while the percent composition refers to the percentage of a particular chemical element in a mixture.
Explanation:
Hope this helps...
2. What are core elections? How are they represented in the shorthand electron configurations?
Answer:
In shorthand electron configuration, the electron configuration starts with the symbol of the noble gas in the previous period, followed by the additional configuration of the electrons for the given element. For example, aluminum has the atomic number 13, which is the number of protons in the nuclei of its atoms.
Explanation:
Hope this helps.
Could someone please help me
Answer:
Whistle 2 has a lower pitch, but is louder.
Whistle 3 has higher pitch and is less loud.
Explanation:
The more frequent the arches are the higher the pitch.
The larger the amplitude the louder the sound is.
;D
a) What is the role of protons in an atom?
b) How do we determine how many protons are in an atom?
Answer:
The number of electrons, in turn, determines the chemical properties of the atom.
Protons contribute to the mass of an atom and provide the positive charge to the nucleus. The number of protons also determines the identity of the element.
Electrons have a negative charge. Since the atom is electrically neutral, the number of electrons must equal the number of protons.
The electrons arrange themselves in energy levels around the nucleus. The outermost or valence electrons of an atom are the ones that take part in chemical reactions. An element’s chemical properties depend on its valence electrons.
Explanation:
1.) Convert 27 milliweasels to weasels
2.) Convert 27 milliohms to ohms
Please include your work step by step if you could, it will help me understand how to do this! Thanks.
Answer:
0.027
Explanation:
the beginning of each word (milli) just means a thousand.
take both number 27s and divide by 1000
it should be 0.027 for both.
you can also just ppretend there is a decimal place after 27 and move it to the left 3 spaces
how do the melting points of enantiomers compare to each other? how do the melting points of diastereomers compare to each other?
Melting points of enantiomers will not compare to each other as they have same M.P. and Diastereoisomers are compared on the basis of melting point.
What are steroisomers?Stereoisomers are those isomers which are having the same molecular formula but different spatial arrangemet of atoms within the molecule.
Enantiomers: Enantiomers are pair of two stereoisomers which are having mirror image of each other, but are not superiposable. They have the same melting point so we can not compare enantiomers on the basis of their melting point.Diastereoisomers: Diastereoisomers are pair of those stereoisomers which are not having mirror image of each other, but are superimposable.They have different physical and chemical properties, so it can be compared on the basis of melting point.Hence, only diastereoisomers are compared on the basis of melting point.
To know more about stereoisomers, visit the below link:
https://brainly.com/question/7063755
How does the use of synthetic products impact the natural resource from which they are derived?
Answer:
The series of chemical reactions that are used to change natural resources into synthetic products is called chemical synthesis. To make a "natural" product, the natural resource is not chemically changed as much. ... For example, the synthetic material plastic is made from petroleum, which is pumped out of the earth.
Explanation:
give brainliest!!!!
The use of synthetic products impact the natural resources from which they are derived by depleting the natural resource and causing harm to it.
What are natural resources?Resources which are obtained from nature by a few modifications in them are called natural resources.These are resources which are available in nature . Every synthetic product is composed of natural resources.
It may exist in a form of separate entity or in form of living-beings or the can even be transformed into products which are of economic importance.Because of the transformation of natural resources into products of economic importance they are getting depleted at a rate which much times greater than the rate it was getting depleted several years ago.
As the products available today comprise of synthetic products natural resources are getting depleted which is becoming a global concern.
Learn more about natural resources,here:
https://brainly.com/question/14665426
#SPJ2
Which of the following is a physical property of matter
Answer: Physical properties of matter include color, hardness, malleability, solubility, electrical conductivity, density, melting point, and boiling point. For the elements, color does not vary much from one element to the next
Answer:
Physical properties of matter include;
evaporationcondensationsublimationfreezingmelting…and so on[tex].[/tex]
A 1,500-kilogram car travelling at 10 meters per second (about 22 mph) strikes a parked car on the side of the road. If the car comes to a stop in half of a second, what force is exerted on the parked car by the moving car?
The force exerted on the parked car by the moving car is –30000 N
To solve this question, we'll begin by calculating the deceleration of the moving car. This can be obtained as follow:
Initial velocity (u) = 10 m/s
Final velocity (v) = 0 m/s
Time (t) = 0.5 s
Deceleration (a) =?[tex]a = \frac{v - u}{t} \\\\ a = \frac{0 - 10}{0.5}\\\\a = \frac{- 10}{0.5}[/tex]
a = - 20 m/sFinally, we shall determine the force exerted by the moving car on the parked car. This can be obtained as follow:
Mass of moving car (m) = 1500 Kg
Acceleration (a) = - 20 m/s
Force (F) =.?F = ma
F = 1500 × (-20)
F = -30000 NNOTE: The negative sign indicate force is in opposite direction to the parked car.
Therefore, the force exerted on the parked car by the moving car is –30000 N
Learn more: https://brainly.com/question/15430805
how many electrons do atoms like to have in their outer shell?
Explanation:
In general, atoms are most stable, least reactive, when their outermost electron shell is full. Most of the elements important in biology need eight electrons in their outermost shell in order to be stable, and this rule of thumb is known as the octet rule.
What type of bond forms between two atoms
with similar EN values (between nonmetals)?
covalent or ionic
Answer:
I'm sure it's covalent bond hope this helps
This is how fluorine appears in the periodic table.
Which is one piece of information that "9” gives about an atom of fluorine?
the atomic number
the atomic mass
the mass of neutrons
the number of neutrons
The atomic number of fluorine is 9.
What is atomic number ?The charge number of an atomic nucleus is known as the atomic number or nuclear charge number of a chemical element. It will be is equal to the proton number of every atom of that element, for ordinary nuclei. Atomic number helps to getting information of elements with the aid of periodic table.
Atomic number = count of proton
It is known that the atomic number of fluorine is 9 . therefore, the answer will be atomic number.
To know more about atomic number.
https://brainly.com/question/16858932.
#SPJ2
7.
Which of the following gases is an important greenhouse gas?
a. Hydrogen
b. Nitrogen
C. Carbon dioxide
d. Oxygen
Answer:
C
Explanation:
I guess
Answer:
c. carbon dioxide
Explanation:
its the highest percentage of gas produced compared to hydrogen, nitrogen and oxygen.
1. Why do plant cells have a cell wall in addition to a cell membrane?
2. Think about the function of chloroplasts. Would you expect to find
more chloroplast in the cells of leaves or the roots of a plant?
3.What two cell structures do protists have that bacteria do not?
4. Do all microbes cause disease? Explain
Answer:
Plant cells have a cell wall and chloroplasts; animal cells do not have either of these structures.
Explanation:
A major difference between a plant cell and an animal cell is presence of chloroplasts in plant cells. Another key difference between plant and animal cells is the presence of a cell wall in plant cells. Both structures are absent in an animal cells.
The cell wall surrounds the plasma membrane of plant cells. This helps to provide the required tensile strength and protection against mechanical and osmotic stress.
Cell walls also help plants to maintain shape and rigidity.
Answer:
1) Plant cells have a cell wall to strengthen the cell
2) Chloroplasts are the site of photosynthesis (turning light energy in sugar) so there would eb a lot more in the leaves that get sunlight than the roots which are underground and receive no sunlight
3) Mitochondria and nucleus
4) No. Some microorganisms are useful to humans, such as the bacteria that create yoghurt, or fungi such as penicillin which are antibiotics, which help us fight bacterial infections
a liquid can be described as a form of matter that
Answer:
That has no fixed shape but it have fixed volume.
describe in your own words the structure of solid sodium chloride and explain why it is formula is NACL
Answer:
Sodium chloride is formed when sodium atoms interact with chlorine atoms. When this occurs, sodium will donate an electron (which is a negatively-charged particle) to chlorine. This makes sodium slightly positive and chlorine slightly negative.
Opposite charges attract, right? So then, sodium ions will attract chloride ions and form an ionic bond. By the way, chloride is the term used to designate the anion form of chlorine. The result is a crystallized salt that has properties that are different from the two parent elements (sodium and chlorine). The chemical formula for sodium chloride is NaCl, which means that for every sodium atom present, there is exactly one chloride atom.
Magnesium is in Group 3. Strontium is in group 5. Which element do you predict will be less reactive in water?
Answer:
Strontium
Explanation:
strontium will be less reactive because reactivity decreases down the group
Rocks can be classified based on texture. The size of the grains in a rock affects its texture. Coarse-grained rocks have large grains, and fine-grained rocks have small grains.
Rocks formed from magma under Earth’s surface have larger grains than rocks formed from lava on Earth’s surface. This is because magma cools slower underneath the ground than it does above ground.
What kind of rock is this?
A.Igneous
B.Metamorphic
C.Sedimentary
Where would this rock most likely be formed?
A. Along the sides of a volcano
B. On the ocean floor"
C.underneath the Earths surfaces
To which group of rocks would this rock belong?
A. Coarsed-Grained Rocks
B. Fine-Grained Rocks
C. Non-Grained Rocks
1. is Igneous rock
2. is underneath Earths surface
3. is Coarsed-grained
hope this help!!^^
The kind of rocks is igneous rocks formed along the sides of volcano and are coarsed-grain rocks.
What are igneous rocks?
Igneous rocks are one of the three main rock types the other two including sedimentary and metamorphic rocks.These rocks are formed by cooling and solidification of lava or magma.
The magma is derived from partial melts in the planet's mantle or crust.Melting is caused by increase in temperature or decrease in pressure or even change in composition.Solidification occurs either below surface which is called as intrusive rocks or on the surface as extrusive rocks.
They are classified according to their texture,mode of occurrence,chemical composition,geometry and mineralogy of rock.The two important variables for classification are mineral composition and cooling history.
Learn more about igneous rocks,here:
https://brainly.com/question/23555197
#SPJ2
how does the shape of the periodic table relate to electron configuration?
The shape of the periodic table is related to the electron configuration of elements by the arrangement of periods which can be used to guess the highest energy levels of the atom. Additionally, the group to which an atom belongs is the number of Valence electrons it has.
The periodic table is a systematic arrangement of elements in order of their atomic number with a set of 7 rows called periods and a set of 8 or 18 Columns called Groups.
In essence, the period of an element is a measure of the highest energy level shell of such an element.Additionally, the group of an element is as determined by the number of Valence electrons in the outermost shell of such an element.Ultimately, the s-, p-, d-, and f- group elements are visibly arranged and can be identified from the shape of the periodic table.
Read more:
https://brainly.com/question/19456463
Which atom generally obtains a stable configuration by sharing electrons?
phosphorus (P)
magnesium (Mg)
lithium (LI
chlorine (CI)
Answer: Phosphorus (P)
Explanation: Phosphorous has 5 valence electrons so it will share some to become stable.
Answer: Phosphorus(P)
what are some chemical properties of lead besides it’s melting and boiling points
Answer:
Atomic mass. 207.2 g.mol -1. Electronegativity according to Pauling. 1.8. Density. 11.34 g.cm-3 at 20°C. Melting point. 327 °C. Boiling point. 1755 °C.
Explanation:
i think
how many grams of HCl is produced from using just 1.5 moles of water
Salt from evaporated seawater has been formed from
O a. artifical means
O b. solution
O c. volcanoes
O d. magma
Answer:
a
Explanation:
its formed from sodium and sodium metal is produced by electrolysis of dry molten sodium chloride.
1 An atom has 24 protons, 22 electrons, and 28 neutrons. What is the atomic number of the atom?
Answer:
24
Explanation:
According to Democritus, which substance cannot be divided?
O A. molecules
O B. matter
O C. compounds
OD. atoms
Answer:
D.) Atoms.
I hope this helps! :)
The three most common states of matter on Earth are solids,blank
and gases. A fourth state,blank
exists in stars and in
flashes.blank
Answer:
example:meaning of the blank you need to do complete the wordsExplanation:
#CarryOnLearningWhat is the correct name for Fe203?
A Iron(V) oxide
B Iron(III) oxide
C Iron(I) oxide
D Iron(II) oxide
Answer:
The answer would be B.
Explanation:
three moles of sodium carbonate are mixed with two moles of lead nitrate in aqueous solution, leading to formation of a solid precipitate. how many moles of spectator ions remain in solution, assuming 100% yield of the precipitate?
There are 4 moles of spectator ions that remain in solution.
The equation of the reaction is;
Na2CO3(aq) + Pb(NO3)2(aq) -------> PbCO3(s) + 2NaNO3(aq)
We have to determine the limiting reactant. This is the reactant that yields the least amount of product. Note that the spectator ions are Na^+ and NO3^- that form NaNO3.
For Na2CO3
1 mole of Na2CO3 yields 2 moles of NaNO3
3 moles of Na2CO3 yields 3 × 2/1 = 6 moles of NaNO3
For Pb(NO3)2
1 mole of Pb(NO3)2 yields 2 moles of NaNO3
2 moles of Pb(NO3)2 yields 2 × 2/1 = 4 moles of NaNO3
We can see that Pb(NO3)2 is the limiting reactant.
Since [NaNO3] = [Na^+] = [NO3^-], it follows that there are 4 moles of spectator ions that remain in solution.
Learn more: https://brainly.com/question/22885959