A school bus moves down a road, dropping off students after school. The bus slows down from a speed of 15 meters per second to a full stop over a distance of 55 meters in 11 seconds. What is the average speed, in meters per second, of the school bus while the bus is slowing down? * 3.7 5.0 26 40

Answer:

Make sure you look at the wording!

Explanation:

if the last word is increased, the answer is increased

if the last word is decreased, the answer is it decreases!

Answer:

Zero.

Explanation:

Answer:

10 m/s²

Explanation:

The above question simply indicates motion under gravity.

The acceleration due to gravity (i.e acceleration of free fall) has a constant value of 10 m/s².

Whether the rock is dropped from a height of 5 m or 2.5 m, it will accelerate at 10 m/s² before striking the ground. The only thing that will be different is the time taken for the rock to strike the ground when released from both 5 m and 2.5 m.

Thus, the rock will have a constant acceleration of 10 m/s² irrespective of the height to which it was released.

Since acceleration due to gravity is a constant,  the acceleration of the rock dropped from the 5 m height is the same as that dropped from the 2.5 m height and is equal to 10 m/s²

Acceleration due to gravity is the acceleration a body falling freely from a height above the earth surface which a body experiences due to the gravitational force of attraction of the earth on the body.

Acceleration due to gravity has a constant value which is equal to 10 m/s².

Therefore, the acceleration of the rock dropped from the 5 m height is the same as that dropped from the 2.5 m height and is equal to 10 m/s².

Learn more about acceleration due to gravity at: https://brainly.com/question/11873969

Hi, you've asked an incomplete question. However, I provided some explanation about the replication process that scientists do.

Explanation:

Replication in research involves carefully repeating an original experiment to see whether the same result would be arrived at as in previous research experiments.

For most scientists today, in other to avoid anything that would erroneously affect the results of the replicated experiment they usually follow the same procedures as carried by the previous researchers.

Answer:

A

Explanation:

Answer:

See the explanation below

Explanation:

We must solve this problem by defining that when we have a constant velocity, the acceleration is equal to zero. That is, when there is no speed change, there is no acceleration. We can understand it very easily by means of the following equation of kinematics.

[tex]v_{f}=v_{o}+a*t[/tex]

where:

Vf = final velocity = 55 [km/h]

Vo = initial velocity = 55 [km/h]

a = acceleration [m/s²]

t = time [s]

As we can see there is no change in speed, and the difference between the two is equal to zero.

[tex]0 = 0 +a*t\\a = (0-0)/t\\a= 0[/tex]

Answer:

Image result for total velocity definition

The average speed of an object is defined as the distance traveled divided by the time elapsed.

Explanation:

Answer:

atoms that have the same # of protons but a DIFFERENT # of NEUTRONS

Explanation:

Answer:

D-They have different number of neutrons

Explanation:

brainliest? Plz

Answer:

220v

Explanation:

Sorry, the question is incomplete

Answer:

on the potential difference applied and on the resistance of the wire.

Explanation:

Ohms law state that the current through a conductor between two points is directly proportional to the potential difference across the two points. Imtroducing the comstant of proportionality, the resistance, one arrives at the usual athematical equation that describes this relationship: I = V/R.

Answer:

This question is incomplete

Explanation:

This question is incomplete. However, to determine the bicyclist that traveled the fastest at the end of the race, the speed of the bicyclists at the end of the race will determine this (not the bicyclist that came first nor there overall speed). The speed of the bicyclist at the end of the race can be determined by using the formula below

s = d ÷ t

Where s is the speed of each bicyclist at the end of the race

d is the specific distance covered by the bicyclist at the end of the race

t is the time taken for the bicyclist to complete that distance

It should be noted that to get an accurate result, the distance covered at the end of the race must be the same for all the bicyclists.

Answer:

B is the best answer for this

Answer:

b. identical to the downward force of gravity on the person.

Explanation:

For an object in an elevator,

F = mg - ma       (g > a)

But since the velocity is uniform, a = 0.

Then,

F = mg - 0

F = mg

This is the actual weight of the object.

The object does not feel weightless, so that its actual weight can be measured during the downward motion of the elevator with uniform velocity.

Thus, the upward normal force, N, exerted by the elevator floor on the person is identical to the downward force of gravity on the person.

Answer:

3

Explanation:

3

Answer:

16+15+19= ??

Am just messign with u lol

Explanation:

anwser s 19 inches

i

I have assumed a weight of 120 N on Earth.

Answer:

The object weighs 20 N on the moon

Explanation:

Weight

The weight of an object depends on the mass m of the object and the acceleration of gravity g of the place they are in.

The formula to calculate the weight is:

W = m.g

If g_e is the acceleration of gravity on Earth, and g_m is the acceleration of gravity on the moon, we know:

[tex]g_m=1/6 g_e[/tex]

Dividing by ge:

[tex]g_m/g_e = 1/6[/tex]

An object of weight We=120 N on planet Earth has a mass of:

[tex]m = 120 / g_e[/tex]

Multiplying by gm:

[tex]m.g_m=120 g_m/g_e[/tex]

Substituting the ratio of accelerations of gravity:

[tex]m.g_m=120 * 1/6[/tex]

Since m.gm is the weight on the Moon Wm:

[tex]W_m=20~N[/tex]

The object weighs 20 N on the moon

Assuming the acceleration due to gravity on the moon is exactly one-sixth of the acceleration due to gravity on Earth, the weight of the object on the moon would be one-sixth of its weight on Earth.

Knowing an object's weight on Earth and applying the ratio of the acceleration caused by gravity on the moon to that on Earth will allow us to determine an object's weight on the moon.

Assume that the object's weight on Earth is W (in newtons).

On Earth, the acceleration due to gravity = 9.8 [tex]m/s^2[/tex].

On the moon, = (1/6) * 9.8 [tex]m/s^2[/tex] = 1.6333 [tex]m/s^2[/tex]

Weight = Mass * Acceleration due to gravity

Weight on the moon = W * (1/6)

Thus, the weight of the object on the moon would be one-sixth of its weight on Earth.

For more details regarding gravity, visit:

https://brainly.com/question/31321801

#SPJ6

Answer:

distance i think

Explanation:

Answer:

Explanation:

Step one:

given data

we are told that 1 large pizza can be cut into 8 even slices

Required

we want to find how many slices are there in 4 large pizzas

Step two:

so if 1 pizza has 8 slices

       4 pizza will have x

cross multiply we have

x= 8*4

x=32 slices

Answer:

D. Height of the ramp.

Explanation:

The solid spherical ball is expected to have more mass than that of the hollow spherical ball. And the speed of both balls would be influenced by the gravitational force as they roll down the ramp. Thus, the masses would move at different speed.

At the bottom of the ramp, the speed of the balls can be varied by varying the height of the ramp. So that the speed of both balls depend on the height of the ramp. As the height of the ramp increases, consequently, the speed of the balls increases. And if the height of the ramp decreases, the speed of the balls decreases consequently.

0.11m/s

Explanation:

avg. velocity = total displacement/ total time

total displacement = 2.55 - 1.09

= 1.46

total time taken = 12.8s

avg velocity = 1.46/12.8

=0.11

Answer:

[tex]{:}\longrightarrow[/tex][tex]\sf 1km=1000×100cm [/tex]

[tex]{:}\longrightarrow[/tex][tex]\sf 1km=100000cm [/tex]

Total distance

[tex]{:}\longrightarrow[/tex][tex]\sf 100000+560=1000560cm [/tex]

[tex]{:}\longrightarrow[/tex][tex]\sf 1000.56m[/tex]

[tex]{:}\longrightarrow[/tex][tex]\sf 1.560km [/tex]

hi ilove you jk it stoo stsfad

Answer:

s = 83.85 km

Explanation:

First we calculate the distance covered by car, while traveling at constant speed:

s₁ = v₁t₁

where,

s₁ = distance covered at constant speed = ?

v₁ = constant speed = 23 m/s

t₁ = time of travel at constant speed = 1 hr = 3600 s

Therefore,

s₁ = (23 m/s)(3600 s)

s₁ = 82800 m = 82.8 km

Now, we calculate the distance travelled in accelerated motion. First we use 1st equation of motion to find acceleration:

Vf = Vi + at₂

where,

Vf = Final velocity = 40 m/s

Vi = Initial Velocity = 30 m/s

a = acceleration = ?

t₂ = time = 30 s

Therefore,

40 m/s = 30 m/s + a(30 s)

a = 10 m/s/30 s

a = 0.33 m/s²

Now, we use 2nd equation of motion for distance:

s₂ = Vi t₂ + (1/2)at₂²

s₂ = (30 m/s)(30 s) + (1/2)(0.33 m/s²)(30 s)²

s₂ = 900 m + 150 m

s₂ = 1050 m = 1.05 km

So, the total distance covered was:

s = s₁ + s₂

s = 82.8 km + 1.05 km

s = 83.85 km

Answer:

A) I = 0.09947 W , β = 109 db , B) β = 116 db , β = 116 db , c) Δβ = 7 dB,

D)  P = 50.27 W

Explanation:

A) The intensity of a spherical sound wave is

          I = P / A

where A is the area of ​​the sphere where the sound is distributed

          A = 4π R²

we substitute

          I = P / 4πR²

let's calculate

          I = 500 / (4π 20²)

          I = 0.09947 W

to express this quantity in decibels we use relate

         β = 10 log (I / I₀)

The detectivity threshold is I₀ = 1 10⁻¹² W / m²

         β = 10 lob (0.09947 / 10⁻¹²)

         β = 10 (10.9976)

         β = 109 db

B) intensity at r = 10m

          I = 500 / (4π 10²)

          I = 0.3979 W / m²

          β = 10 log (0.3979 / 10⁻¹²)

          β = 10 (11.5997)

          β = 116 db

C) the change in intensity in decibles is

          Δβ = β₁ - β₂

          Δβ = 116 - 109

          Δβ = 7 dB

D) let's find the intensity for 100 db

          I = I₀ 10 (β / 10)

          I = 10⁻¹² 10 (100/10)

          I = 10⁻² W / m²

Thus

           P = I A

           P = I 4π R²

           P = 10⁻² 4π 20²

           P = 50.27 W

Answer:

answer is C on edge 2021

Explanation:

Answer:

Answer is (b) Mercury, venus and Mars.

Explanation:

i think b is correct!!

;-) :-) :-) :-)

Answer:

im just so focused on the fact that im going to mars :O

Answer:

becomes wider

Explanation:

From;   asin θ= m λ

It was said in the question that in this particular instance  blue light is replaced by red light. The wavelength of blue light is less than that of red light, it then follows that the central bright maximum in this pattern widens when red light is used.

Therefore the diffraction pattern becomes wider.

Answer:

Explanation:

Step one:

given data

mass of cable= 4lb/ft

mass of coal= 1000lb

dept of mine= 700ft

Step two:

Required

the work-done to lift the coal and the rope combined

Work-done to lift coal

Wc=1000*700= 700,000 lb-ft

Work-done to lift rope

[tex]Wr=\int\limits^{700} _0 {4(700-y)} \, dx \\\\Wr=4(700y-\frac{1}{2}y^2 )\limits^{700}_0[/tex]

substitute y=700 we have, since y=0 will result to 0

[tex]Wr=4(700*700-\frac{1}{2}*700^2 )\\\\Wr=4(490000-245000)\\\\Wr=4(245000)\\\\Wr=980000ft-lbs[/tex]

Answer:

60.185 percent of the original kinetic energy is convertible to internal energy.

Explanation:

Let suppose that collision between both particles is entirely inellastic. If there is no external forces exerted on any of the particles, then we can apply the Principle of Linear Momentum Conservation. That is:

[tex]m_{A}\cdot v_{A,o} + m_{B}\cdot v_{B,o} = (m_{A}+m_{B})\cdot v[/tex]

[tex]v = \frac{m_{A}\cdot v_{A,o}+v_{B}\cdot v_{B,o}}{m_{A}+m_{B}}[/tex] (1)

Where:

[tex]m_{A}[/tex] - Mass of the 4.8-g particle, measured in kilograms.

[tex]m_{B}[/tex] - Mass of the 7.4-g particle, measured in kilograms.

[tex]v_{A,o}[/tex] - Initial speed of the 4.8-g particle, measured in meters per second.

[tex]v_{B,o}[/tex] - Initial speed of the 7.4-g particle, measured in meters per second.

[tex]v[/tex] - Final speed of the collided particles, measured in meters per second.

If we know that [tex]m_{A} = 4.8\times 10^{-3}\,kg[/tex], [tex]m_{B} = 7.4\times 10^{-3}\,kg[/tex], [tex]v_{A,o} = 3\,\frac{m}{s}[/tex] and [tex]v_{B,o} = 0\,\frac{m}{s}[/tex], then the final speed of the system is:

[tex]v = \frac{(4.8\times 10^{-3}\,kg)\cdot \left(3\,\frac{m}{s} \right)+(7.4\times 10^{-3}\,kg)\cdot \left(0\,\frac{m}{s} \right)}{4.8\times 10^{-3}\,kg+7.4\times 10^{-3}\,kg}[/tex]

[tex]v = 1.180\,\frac{m}{s}[/tex]

During the collision part of the initial energy is dissipated in the form of heat, which is related to the internal energy ([tex]\Delta U[/tex]), measured in joules. According to the Principle of Energy Conservation, we have the following model:

[tex]\Delta U = K_{A}+K_{B}-K[/tex] (2)

Where:

[tex]K_{A}[/tex], [tex]K_{B}[/tex] - Initial translational kinetic energies of each particle, measured in joules.

[tex]K[/tex] - Final translational kinetic energy of the collided particles, measured in joules.

By applying the definition of translational kinetic energy, we expand and simplify the equation above:

[tex]\Delta U = \frac{1}{2}\cdot m_{A}\cdot v_{A,o}^{2}+\frac{1}{2}\cdot m_{B}\cdot v_{B,o}^{2} -\frac{1}{2}\cdot (m_{A}+m_{B})\cdot v^{2}[/tex] (3)

If we get that  [tex]m_{A} = 4.8\times 10^{-3}\,kg[/tex], [tex]m_{B} = 7.4\times 10^{-3}\,kg[/tex], [tex]v_{A,o} = 3\,\frac{m}{s}[/tex], [tex]v_{B,o} = 0\,\frac{m}{s}[/tex] and [tex]v = 1.180\,\frac{m}{s}[/tex], the internal energy associated with the system is:

[tex]\Delta U = \frac{1}{2}\cdot (4.8\times 10^{-3}\,kg)\cdot \left(3\,\frac{m}{s} \right)^{2}+ \frac{1}{2}\cdot (7.4\times 10^{-3}\,kg)\cdot \left(0\,\frac{m}{s} \right)^{2}-\frac{1}{2}\cdot (4.8\times 10^{-3}\,kg+7.4\times 10^{-3}\,kg)\cdot \left(1.180\,\frac{m}{s} \right)^{2}[/tex]

[tex]\Delta U = 0.013\,J[/tex]

And the initial energy of both particles is:

[tex]E_{o} = \frac{1}{2}\cdot (4.8\times 10^{-3}\,kg)\cdot \left(3\,\frac{m}{s}\right)^{2}+\frac{1}{2}\cdot (7.4\times 10^{-3}\,kg)\cdot \left(0\,\frac{m}{s} \right)^{2}[/tex]

[tex]E_{o} = 0.0216\,J[/tex]

Lastly, the percentage of the original kinetic energy that is convertible to internal energy is: ([tex]\Delta U = 0.013\,J[/tex], [tex]E_{o} = 0.0216\,J[/tex])

[tex]\%e = \frac{\Delta U}{E_{o}}\times 100\,\%[/tex] (4)

[tex]\%e = \frac{0.013\,J}{0.0216\,J}\times 100\,\%[/tex]

[tex]\%e = 60.185\,\%[/tex]

60.185 percent of the original kinetic energy is convertible to internal energy.

Answer:

oof ok

Explanation:

Thank you :)