A car travel from A to B at a speed of 30km per hour the average speed of the car the whole journey is?​

Answers

Answer 1
the formula is Speed=Distance/Time. I can help you if you give me the distance from A to B. Then you would dived that by time to get your speed.

Related Questions

What is the difference between magnitude of displacement and magnitude of velocity

Answers

(a) Magnitude of displacement (sometimes called distance) over an interval of time, and the total length of path covered by a particle over the same interval.
(b) Magnitude of average velocity over an interval of time, and the average speed over the same interval. [Average speed of a particle over an interval of time is defined as the total path length divided by the time interval].

A wheel rotates at 24 revolutions every 3 minutes. This is equivalent to

Answers

8 revolutions every minute

3. Hahn determined that barium (atomic number 56) was one of the elements created when a uranium atom (atomic number 92) split . Use a periodic table to determine the other element that was created during this process.​

Answers

According to a periodic table, Krypton was created during the fission of Uranium.

What is the atomic number?

Atomic number is a characteristic associated with an element and indicates its number of protons, when a fision occurs, the total number protons is conserved.

Thus, the fission of uranium is led by two elements with atomic numbers 56 and 36. According to a periodic table, those atomic numbers are associated to elements Barium (Ba) and Krypton (Kr), respectively.

According to a periodic table, Krypton was created during the fission of Uranium. [tex]\blacksquare[/tex]

To learn more on fission, we kindly invite to check this verified question:  https://brainly.com/question/6572079

1. A listener stands 20.0 m from a speaker that pumps out music with a power output of 100.0 W.
a. What is surface area being vibrated by the time the sound reaches the listener (you may
have to look up the equation for the area of a sphere).
b. What is the intensity of the sound wave as it reaches the person listening?
c. What is the relative intensity of the sound as heard by the listener?
2. A police car siren has a frequency of 512 Hz. They are chasing a suspect at 65.0 m/s.
a. What is the speed of sound if the air temperature is 15.0o?
b. If the suspect is running away from the police car at 10.0 m/s, what is the frequency of
the sound he hears?

Answers

(1.a) The surface area being vibrated by the time the sound reaches the listener is 5,026.55 m².

(1.b) The intensity of the sound wave as it reaches the person listening is 0.02 W/m².

(1.c) The relative intensity of the sound as heard by the listener is 103 dB.

(2.a) The speed of sound if the air temperature is 15⁰C is 340.3 m/s.

(2.b) The frequency of the sound heard by the suspect is 614.3 Hz.

Surface area being vibrated

The surface area being vibrated by the time the sound reaches the listener is calculated as follows;

A = 4πr²

A = 4π x (20)²

A = 5,026.55 m²

Intensity of the sound

The intensity of the sound is calculated as follows;

I = P/A

I = (100) / (5,026.55)

I = 0.02 W/m²

Relative intensity of the sound

[tex]B = 10log(\frac{I}{I_0} )\\\\B = 10 \times log(\frac{0.02}{10^{-12}} )\\\\B = 103 \ dB[/tex]

Speed of sound at the given temperature

[tex]v= 331.3\sqrt{1 + \frac{T}{273} } \\\\v = 331.3\sqrt{1 + \frac{15}{273} } \\\\v = 340.3 \ m/s[/tex]

Frequency of the sound

The frequency of the sound heard is determined by applying Doppler effect.

[tex]f_o = f_s(\frac{v \pm v_0}{v \pm v_s} )[/tex]

where;

-v₀ is velocity of the observer moving away from the source-vs is the velocity of the source moving towards the observerfs is the source frequencyfo is the observed frequencyv is speed of sound

[tex]f_0 = f_s(\frac{v-v_0}{v- v_s} )[/tex]

[tex]f_0 = 512(\frac{340.3 - 10}{340.3 - 65} )\\\\f_0 = 614.3 \ Hz[/tex]

Learn more about intensity of sound here: https://brainly.com/question/17062836

A sound wave has a frequency of 350 Hz and a wavelength of 2.25m. At what speed will the
sound wave move? Show your work.

Answers

Answer:

787.5m/s

Explanation:

Speed = wavelength x frequency

speed = 2.25m x 350 Hz

= 787.5m/s

Calculate the electric field at x = 2 given the electric potential at this point is ϕ=3x3.

Answers

Hi there!

Recall the following relationship:
[tex]E = -\frac{dV}{dx}[/tex]

E = Electric field strength (V/m)
V = Potential Difference (V)

Take the derivative of the given electric potential equation using the power rule:
[tex]\frac{d}{dx}x^n = nx^{n-1}[/tex]

[tex]-\frac{dV}{dx} = -(3 \cdot 3 \cdot x^2) = -9x^2[/tex]

Evaluate at x = 2:
[tex]E(2) = -9(2^2) = \boxed{-36 \frac{V}{m}}[/tex]

**The magnitude of the field strength would simply be 36 V/m.

According to Sigmund Freud, memories that easily surface into everyday thought are which part of the mind?

Answers

The conscious mind contains all of the thoughts, memories, feelings, and wishes of which we are aware at any given moment. This is the aspect of our mental processing that we can think and talk about rationally. This also includes our memory, which is not always part of consciousness but can be retrieved easily and brought into awareness.

hope it helps...!!!

According to Sigmund Freud, memories that easily surface into everyday thought are a conscious part of the mind.

What is conscious mind?

At any given time, the conscious mind contains all of our thoughts, memories, feelings, and wants.

This is the element of our brain functioning that we can reasonably think about and discuss. This includes our memories, which are not always conscious but can be readily recovered and brought into awareness.

Memories that easily emerge into everyday consciousness, according to Sigmund Freud, are a conscious element of the mind.

Hence, memories that easily surface into everyday thought are a conscious part of the mind.

To learn more about the conscious mind refer:

https://brainly.com/question/4400566

#SPJ2

help me solve the following question below in the attachment

Answers

Answer:

Explanation:

The point P is influenced by two electric fields, that are from Q1 and Q2. Because Q1 is a positive point charge, the E-fields is going to the right and the E-fields from Q2 is going to the left because of negative point charge. So:

[tex]E_{1}=\frac{kQ_{1}}{R_{1}^{2}}[/tex]

[tex]E_{2}=\frac{kQ_{2}}{R_{2}^{2}}[/tex]

Where R1 = 2 + 3 = 5 m, and R2 = 3 m. With k = [tex]k=9\times 10^{9}[/tex] in [tex]Nm^{2}/C^{2}[/tex], we can obtain:

[tex]E_{1}=(9\times 10^{9})\frac{500\times10^{-6}}{25}=180\times 10^{3}[/tex] N/C (+)

[tex]E_{2}=(9\times 10^{9})\frac{100\times 10^{-6}}{9}=100\times 10^{3}[/tex] N/C (-)

So: the Electric Field at P : [tex]E_{P}=E_{1}-E_{2}=(180-100)\times 10^{3}=8\times 10^{4}[/tex] N/C in magnitude

Many U.S. college freshman say that "being well-off" financially is an essential life goal and that "making more money" was a very important factor in their decision to attend college. According to Abram Maslow, which meta-needs are being fulfilled by "making more money"?

Answers

Based on research by Abraham Maslow, the meta-needs which are fulfilled by "making more money" are none of the meta-needs.

What are meta-needs?

According to Abraham Maslow, meta-needs are human needs that relate to beauty, knowledge and creativity.

All of these can be met without having to make more money so it stands to reason that there are no meta-needs that can be met by making more money.

The main need that is met by making more money according to Maslow is Security and it is not a meta-need.

Find out more on Abraham Maslow at https://brainly.com/question/7059459.

In a steam engine, steam in a cylinder expands against a piston, exerting 10 atm of external pressure. The volume of the cylinder increases by 10 L and simultaneously the steam cools, losing 3,000 kJ of energy to the surroundings. What is the change in energy of the steam

Answers

If steam in a cylinder expands against a piston, exerting 10 atm of external pressure, the change in energy of the steam is mathematically given as

dE= -3010 kJ

What is the change in energy of the steam?

Generally, the equation for the workdone  is mathematically given as

Work = - (pressure * Volume)

Therefore

w= - (10 x 10)

w= -100 L atm

In conclusion

dEnergy = q + work

dE = -3000 + -10.13

dE= -3010 kJ

Read more about Energy

https://brainly.com/question/13439286

When is an object positively charged?

Answers

Answer:

when it has a fewer amount of electrons than protons

An eletrical conductor is a material that allows _____ to travel through it freely​

Answers

Answer:

it allows electric charges to travel through freely

17. How long will it take for an object accelerating at a constant rate of 5 m/s to change its velocity from 0 to 6 m/s? (A) 0.6s (B) 1.2 s (C) 2.4 s (D) 3.6 s (E) 4.8 s​

Answers

Answer:

(B)

Explanation:

Time = change of velocity ÷ acceleration

= (6-0) ÷ 5

= 1.2

1.2 s it take for an object accelerating at a constant rate of 5 m/s to change its velocity from 0 to 6 m/s.

Hence, the correct option is D.

To calculate the time it takes for an object to change its velocity from 0 to 6 m/s, we can use the formula:

time = change in velocity / acceleration

Given that the change in velocity (Δv) is 6 m/s and the acceleration (a) is 5 m/s², we can plug these values into the formula:

time = 6 m/s / 5 m/s²

time = 1.2 seconds

Therefore, 1.2 s it take for an object accelerating at a constant rate of 5 m/s to change its velocity from 0 to 6 m/s.

Hence, the correct option is D.

To know more about accelerating here

https://brainly.com/question/2303856

#SPJ2

In the figure below (Figure 1), the upper ball is released from rest, collides with the stationary lower ball, and sticks to it. The strings are both 50.0 cm long. The upper ball has a mass of 2.20 kg and it is initially 10.0 cm higher than the lower ball, which has a mass of 2.70 kg. Find the frequency of the motion after the collision. Find the maximum angular displacement of the motion after the collision.

Answers

(a) The frequency of the motion after the collision is 0.71 Hz.

(b) The maximum angular displacement of the motion after the collision is 16.3⁰.

Speed of the 2.2 kg ball when it collides with 2.7 kg ball

The speed of the 2.2 kg ball which was initially 10 cm higher that 2.7 kg ball is calculated as follows;

K.E = P.E

¹/₂mv² = mgh

v² = 2gh

v = √2gh

v = √(2 x 9.8 x 0.1)

v = 1.4 m/s

Final speed of both balls after collision

The final speed of both balls after the collision is determined from the principle of conservation of linear momentum.

Pi = Pf

m₁v₁ + m₂v₂ = vf(m₁ + m₂)

2.2(1.4) + 2.7(0) = vf(2.2 + 2.7)

3.08 = 4.9vf

vf = 3.08/4.9

vf = 0.63 m/s

Maximum displacement of the balls after the collision

P.E = K.E

[tex]mgh_f = \frac{1}{2} mv_f^2\\\\h_f = \frac{v_f^2}{2g} \\\\h_f = \frac{(0.63)^2}{2(9.8)} \\\\h_f = 0.02 \ m[/tex]

Maximum angular displacement

The maximum angular displacement of the balls after the collision is calculated as follows;

[tex]cos \theta = \frac{L - h_f}{L} \\\\cos\theta = \frac{0.5 - 0.02}{0.5} \\\\cos\theta = 0.96\\\\\theta = cos^{-1}(0.96)\\\\\theta = 16.3 \ ^0[/tex]

Frequency of the motion

[tex]f = \frac{1}{2\pi} \sqrt{\frac{g}{L} } \\\\f = \frac{1}{2\pi } \sqrt{\frac{9.8}{0.5} } \\\\f = 0.71 \ Hz[/tex]

Learn more about maximum angular displacement here: https://brainly.com/question/13665036

If a snowboarder’s initial speed is 4 m/s and comes to rest when making it to the upper level. With a slightly greater initial speed of 5 m/s, the snowboarder is moving to the right on the upper level. His final speed in this case is 3 m/s. Suppose this situation is repeated on planet Epsilon, where gravity is less than gravity on earth.

A. Would the height of the hill on Epsilon cause a reduction in speed from 4 m/s to 0 greater than, less than, or equal to the height of the corresponding hill on earth? Explain.

B. Consider the hill on Epsilon discussed in part A. If the initial speed at the bottom of the hill is 5 m/s, will the final speed at the top of the hill be greater than, less than, or equal to 3 m/s? Explain.

Answers

(a) At a corresponding hill on Earth and a lesser gravity on planet Epslion, the height of the hill will cause a reduction in the initial speed of the snowboarder from 4 m/s to a value greater than zero (0).

(b) If the initial speed at the bottom of the hill is 5 m/s, the final speed at the top of the hill be greater than 3 m/s.

Conservation of mechanical energy

The effect of height  and gravity on speed on the given planet Epislon is determined by applying the principle of conservation of mechanical energy as shown below;

ΔK.E = ΔP.E

¹/₂m(v²- u²) = mg(hi - hf)

¹/₂(v²- u²) = g(0 - hf)

v² - u² = -2ghf

v² = u² - 2ghf

where;

v is the final velocity at upper levelu is the initial velocityhf is final heightg is acceleration due to gravity

when u² = 2gh, then v² = 0,

when gravity reduces, u² > 2gh, and v² > 0

Thus, at a corresponding hill on Earth and a lesser gravity on planet Epslion, the height of the hill will cause a reduction in the initial speed of the snowboarder from 4 m/s to a value greater than zero (0).

Final speed

v² = u² - 2ghf

where;

u is the initial speed = 5 m/sg is acceleration due to gravity and its less than 9.8 m/s²v is final speedhf is equal height

Since g on Epislon is less than 9.8 m/s² of Earth;

5² - 2ghf > 3 m/s

Thus, if the initial speed at the bottom of the hill is 5 m/s, the final speed at the top of the hill be greater than 3 m/s.

Learn more about conservation of mechanical energy here: https://brainly.com/question/6852965

1 If electromagnetic radiation acted like particles in the double-slit experiment, what would be observed?

a The screen would remain dark because no radiation would reach the screen.
b One bright band would appear in the center of the screen.
c A series of light and dark bands would appear on the screen.
d Two bright bands would appear on the screen in line with the slits.

2 Which statement about the interference behavior of electromagnetic radiation seen in the double-slit test experiment is true?

a Waves that make up the radiation collide with each other so that they add together or cancel each other out.
b Particles that make up the radiation collide with each other and scatter randomly.
c Particles that make up the radiation collide with each other so that they add together or cancel each other out.
d Waves that make up the radiation do not interact with each other.

3 Which statement about the observed results of the double-slit experiment is true?

a Waves that are out of phase constructively interfere to create bright bands.
b Waves that are in phase destructively interfere to create bright bands.
c Waves that are out of phase constructively interfere to create bright bands.
d Waves that are in phase constructively interfere to create bright bands.

4 Which statement about the observed results of the double-slit experiment is true?

a Waves that are in phase constructively interfere to form dark bands.
b Waves that are out of phase constructively interfere to form dark bands.
c Waves that are in phase destructively interfere to form dark bands.
d Waves that are out of phase destructively interfere to form dark bands.

5 A scientist decreases the wavelength of the light used in a double-slit experiment and keeps every other aspect the same. What will be true about the new interference pattern seen on the screen compared to the original interference pattern?

a The spacing between the dark fringes will increase.
b The spacing between the bright fringes will increase.
c The spacing between the bright fringes will decrease.
d The spacing between the dark fringes will remain the same.

6 Consider the two-slit interference experiment. Electromagnetic radiation passes through the two slits that are a distance of 0.0170 nm apart. A fourth-order bright fringe forms at an angle of 8.0 degrees relative to the incident beam. What is the wavelength of the light?

a 789 nm
b 420 nm
c 581 nm
d 591 nm

Answers

Answer:

1. Two bright bands would appear on the screen in line with the slits.

2. Waves that make up the radiation collide with each other so that they add together or cancel each other out.

3. Waves that are in phase constructively interfere to create bright bands.

4. Waves that are out of phase destructively interfere to form dark bands.

5. The spacing between the bright fringes will decrease.

6. 581 nm

Explanation:

A hanging weight, with a mass of m1 = 0.365 kg, is attached by a string to a block with mass m2 = 0.825 kg as shown in the figure below. The string goes over a pulley with a mass of M = 0.350 kg. The pulley can be modeled as a hollow cylinder with an inner radius of R1 = 0.0200 m, and an outer radius of R2 = 0.0300 m; the mass of the spokes is negligible. As the weight falls, the block slides on the table, and the coefficient of kinetic friction between the block and the table is k = 0.250. At the instant shown, the block is moving with a velocity of vi = 0.820 m/s toward the pulley. Assume that the pulley is free to spin without friction, that the string does not stretch and does not slip on the pulley, and that the mass of the string is negligible. Using energy methods, find the speed of the block (in m/s) after it has moved a distance of 0.700 m away from the initial position shown.

Answers

The speed of the block after it has moved the given distance away from the initial position is 1.1 m/s.

Angular Speed of the pulley

The angular speed of the pulley after the block m1 fall through a distance, d, is obatined from conservation of energy and it is given as;

K.E = P.E

[tex]\frac{1}{2} mv^2 + \frac{1}{2} I\omega^2 = mgh\\\\\frac{1}{2} m_2v_0^2 + \frac{1}{2} \omega^2(m_1R^2_2 + m_2R_2^2) + \frac{1}{2} \omega^2( \frac{1}{2} MR_1^2 + \frac{1}{2} MR_2^2) = m_1gd- \mu_km_2gd\\\\\frac{1}{2} m_2v_0^2 + \frac{1}{2} \omega^2[R_2^2(m_1 + m_2)+ \frac{1}{2} M(R_1^2 + R_2^2)] = gd(m_1 - \mu_k m_2)\\\\[/tex]

[tex]\frac{1}{2} m_2v_0 + \frac{1}{4} \omega^2[2R_2^2(m_1 + m_2) + M(R^2_1 + R^2_2)] = gd(m_1 - \mu_k m_2)\\\\2m_2v_0 + \omega^2 [2R_2^2(m_1 + m_2) + M(R^2_1 + R^2_2)] = 4gd(m_1 - \mu_k m_2)\\\\\omega^2 [2R_2^2(m_1 + m_2) + M(R^2_1 + R^2_2)] = 4gd(m_1 - \mu_k m_2) - 2m_2v_0^2\\\\\omega^2 = \frac{ 4gd(m_1 - \mu_k m_2) - 2m_2v_0^2}{2R_2^2(m_1 + m_2) + M(R^2_1 + R^2_2)} \\\\\omega = \sqrt{\frac{ 4gd(m_1 - \mu_k m_2) - 2m_2v_0^2}{2R_2^2(m_1 + m_2) + M(R^2_1 + R^2_2)}} \\\\[/tex]

Substitute the given parameters and solve for the angular speed;

[tex]\omega = \sqrt{\frac{ 4(9.8)(0.7)(0.365 \ - \ 0.25\times 0.825) - 2(0.825)(0.82)^2}{2(0.03)^2(0.365 \ + \ 0.825)\ \ +\ \ 0.35(0.02^2\ + \ 0.03^2)}} \\\\\omega = \sqrt{\frac{3.25}{0.00214\ + \ 0.000455 } } \\\\\omega = 35.39 \ rad/s[/tex]

Linear speed of the block

The linear speed of the block after travelling 0.7 m;

v = ωR₂

v = 35.39 x 0.03

v = 1.1 m/s

Thus, the speed of the block after it has moved the given distance away from the initial position is 1.1 m/s.

Learn more about conservation of energy here: https://brainly.com/question/24772394

When you jump, you exert a pushing force against the ground. Gravity pulls you back down. Why can a person jump higher on the moon than on Earth?

Answers

Answer:

This is because the force of gravity is much less on the moon than on the earth, therefore the person wont be pulled down much and will jump higher

Answer: This is because the force of gravity is much less on the moon than on the earth, therefore the person won't be pulled down much and will jump higher.

What are the Applications of electronic polarization?

Answers

Answer:

it can be used for communication, industrial application and also for instrumentation application

Physics Help anyone?

Answers

Hi there!

A)

At this point, the pilot is experiencing a DOWNWARD NET centripetal force (ALWAYS points towards the center of the circle) as well as a downward force due to gravity. Additionally, we can say that the normal force exerted by the seat on the pilot is its apparent weight.

[tex]\Sigma F = F_g + F_N[/tex]

**The net force is the centripetal force.

We can assign both to be positive since they work in the same direction. (Assigning down as positive in THIS situation will make things easier).

We know that:
[tex]F_c = \frac{mv^2}{r}[/tex]

Fc = Centripetal force (N)
m = mass (kg)
v = velocity (m/s)

r = radius (m)

[tex]F_g = mg[/tex]

Fg = Force due to gravity (N)
m = mass (kg)
g = acceleration due to gravity (9.81 m/s²)

Solve for mass. (Given weight)

[tex]m = \frac{F_g}{g}\\\\m = \frac{719}{9.8} = 73.367 kg[/tex]
Now, we have everything we need to solve.

[tex]\frac{mv^2}{r} = F_g + F_N \\\\\frac{mv^2}{r} - F_g = F_N\\\\F_N = \frac{(73.367)(225^2)}{3110} - 719 = \boxed{475.278 N}[/tex]

B)
Weightlessness is achieved when the pilot is in free fall. In this instance, FN (Normal force by the seat) = 0 N.

We can use the same setup as above.

[tex]\frac{mv^2}{r} = F_g + 0 (F_N)[/tex]

[tex]\frac{mv^2}{r} = mg[/tex]

Solve for 'v'.

[tex]\frac{v^2}{r} = g\\\\v = \sqrt{gr} = \sqrt{(9.81)(3110)} = \boxed{174.669 \frac{m}{s}}[/tex]

C)
At the BOTTOM, we have the force of gravity working DOWNWARD (Negative in this instance), while the centripetal force (NET FORCE) and normal force are upward (Positive). Do another summation of forces:
[tex]\Sigma F = F_N - F_g\\\\\\frac{mv^2}{r} + F_g = F_N \\\\F_N = \frac{(73.367)(225^2)}{3110} + 719 = \boxed{1913.278 N}[/tex]

The diagram shows a heating curve for water.
Which statement best describes what is happening at
segment W-X?
Heating Curve for Water
O Water is absorbing heat.
O Water is releasing heat.
O Aliquid is changing to a gas.
O A gas is changing to a liquid.
z
110
100
90
x
х
Y
80
Temperature (Cº)
70
60
50
40
w
Heat (J)

Answers

Answer:

a water is heating up

Explanation:

the water's temperature is inceasing

If you go into a store to buy a digital thermometer and there are 8 instruments of the same brand and model, at the same price, but they indicate different temperature values, explain which one you choose and why.​

Answers

Answer: I would buy the thermometer with the most features because they all cost the same price so why not you getting more than what you are paying for than buying something the same but with less feature and things it can do for the same price.

Hope this helps :) If so brainliest would mean alot thanks!

Explanation:

Explain the use of each part of Vernier callipers?​

Answers

A Vernier caliper has total of four jaws, with two upper jaws used for measuring the internal distances and two lower jaws for measuring the internal distances of objects. The two upper jaws are the smaller jaws of the vernier that are used to measure the internal distances between two parallel sides of an object or an internal diameter.

1) How many joules of heat are required to raise the temperature of 550 g of water from
12.7 °C to 28.8°C ? Specific heat of liquid water is 4.184 J/g °C.

Answers

Answer:

Explanation:

You can use [tex]Q = mc\Delta T=(550)(4.184)(28.8-12.7)=37049.32[/tex] joule.

What does the atomic numbers equal? A number of protons in the atomic nucleus B number of protons and neutrons in the atomic nucleus C number of neutrons in the atomic nucleus​

Answers

Answer:

number of protons

explanation:

the atomic number of an atom is equal to the number of protons

If the period of oscillation of a simple pendulum is 4s, find its length. If the velocity of the bob
at the mean position is 40cms−1
, find its amplitude. (take gravity = 9.81ms−2

Answers

Answer:

Explanation:

Because we assume the pendulum is a "mathematical pendulum" (neglecting the moment of inertia of the bob), we can find:

[tex]T=2\pi\sqrt{\frac{L}{g}} \rightarrow 4=2\pi\sqrt{\frac{L}{9.81}} \rightarrow \frac{4}{\pi^{2}}=\frac{L}{9.81} \rightarrow L \approx 3.97 m[/tex]

By using the [tex]y=A\sin(\omega t) \rightarrow v = \frac{dy}{dt}=\omega A \cos\omega t = \omega\sqrt{A^{2}-y^{2}}[/tex]

The mean position is the position when y = 0, so:

[tex]\omega = \frac{2\pi}{T}=\frac{2\pi}{4}=0.5\pi[/tex] rad/s

and [tex]v = \omega A \rightarrow A=\frac{40}{0.5\pi}=\frac{80}{\pi}[/tex] in centimeters (cm).

What is created when an object travels faster than the speed of sound

Answers

Answer:

Explanation:

Answer: Sonic Boom.

When the object reaches the speed of sound, air cannot readily move out of the way and a shock wave is formed. When the object is moving faster than sound, the resulting sounds travel behind the object, creating a sonic boom.

The force between a pair of charges is 900 newtons. The distance between the charges is 0.01 meters. If one of the charges is 2e-10 C what is the strength of the other charge ?

Answers

Answer:

[tex] \fbox{strength \: of \: the \: other \: charge = - 0.0196 Ke \: Coulomb}[/tex]

Explanation:

Given:

Force between pair of charges= 900 newtons

The distance between the charges = 0.01 meters

Strength of Charge first q1 = 2e-10 Coulomb

To find:

Strength of Charge second q2 = ____ Coulomb?

Solution:

We know that,

Force between two charges separate by distance r is given by the equation,

[tex]|F| = K_e \frac{q1 \cdot \: q2}{ {r}^{2} } \\ 900 =K_e \frac{(2e - 10)\cdot \: q2}{ {0.01}^{2} } \\ 900 \times {10}^{ - 4} = K_e {(2e - 10)\cdot \: q2} \\ q2 = \frac{9 \times {10}^{ - 2} }{(2e - 10) K_e} \\ \\ \fbox{We \: know \: that \: e = 2.71 } \\ substituting \: the \: value \: \\ q2 = \frac{9 \times {10}^{ - 2} }{(2 \times 2.71 - 10)K_e} \\ q2 = \frac{0.09}{ - 4.58 K_e} \\ q2 = \frac{-0.0196}{K_e}\: coulomb[/tex]

[tex] \fbox{strength \: of \: the \: other \: charge = - 0.0196 Ke \: Coulomb}[/tex]

Thanks for joining brainly community!

what does a snow leopard eat?

Answers

Answer:

They eat Himalayan blue sheep, boar, deers, wild mountain goats, pikas etc.

Explanation:

QUESTION 9
What determines the evolutionary path a star takes through its life?
O a. Diameter
O b. Who made it
O c. Color
O d. Mass

Answers

Answer:

Mass

Explanation:

In the core of the red giant, helium fuses into carbon. All stars evolve the same way up to the red giant phase. The amount of mass a star has determines which of the following life cycle paths it will take from there. The life cycle of a low mass star (left oval) and a high mass star (right oval).May 7, 2015

The answer would be mass
Other Questions
presenting results to the user is called HELP PLS WILL GIVE BRAINLIEST AND THANKSIn a reaction chamber, 3.0mol of aluminum is mixed with 5.3mol Cl2 and reacts. The reaction is described by the following balanced chemical equation. 2Al + 3Cl2 ==> 2AlCl3a)Identify the limiting reagent for the reaction.b)Calculate the number of moles or products formed gggggggggggggggggggggg Name and explain the meaning of each of the three Jewish symbols below. This box plot displays information about the number of text messages some students sent one day. What is the median number of texts sent by the students?What is the IQR ?P.S Please don't troll I really need help 4/15, 5/27, 7/18 Arrange the fractions in ascending order A 10-year-old child burned her hand while taking cookies out of the oven. The child has blisters, pain, and redness on the top of her hand. How should you treat the child? What should your goals in end-of-life care include? P'(8,-2) is the image of P after a 180 rotation about the origin. What are the coordinates of P? Al vender una computadora, un vendedor descuenta el 15%, y aun as gana el 35%, del costo. qu %del costo es el precio de venta? If someone could help me with this I would really appreciate it thank you !! 30 BONUS POINTS) HELP ME OUT-The graph below shows the distances, in miles, that a dragonfly can travel in a certain number of hours:A graph titled Motion of a Dragonfly shows Time in hours on the x axis and Distance in miles on the y axis. The scale on the x axis shows number from 0 to 10 at increments of 2, and on the y axis, the numbers are shown from 0 to 200 at increments of 40. A straight line joins the ordered pairs 0, 0 and 2, 40 and 4, 80, and 6, 120Based on the graph, what is the dependent variable, the equation relating the two variables, and how far will the dragonfly travel in 24 hours if it continues to fly at the same speed? The dependent variable is distance, the equation is x = 20y, and the dragonfly will travel 360 miles. The dependent variable is distance, the equation is y = 20x, and the dragonfly will travel 480 miles. The dependent variable is time, the equation is x = 20y, and the dragonfly will travel 360 miles. The dependent variable is time, the equation is y = 20x, and the dragonfly will travel 480 miles - Which of the following would best be solved using completing the square?A. 22 2 20 = 0B. 22 = 36C. 2x2 + 15x = 6D. 203 3c2 + 45 12 = 0 John Travolta flew his plane last weekend. What would be the angle measure ofx when his plane reached an altitude of 2500m? Who was the first president? EASYYYYYYYYAS THE CELL GETS SMALLER, WHAT HAPPENS TO THE SURFACE AREA TO VOLUME RATIO A solution was found to have a 15.6 % transmittance at 500 nm, its wavelength of maximum absorption, using a cell with a path length of 5.00 cm. Calculate the absorbance of the solution in a 1.00 cm cell at 500 nm. A. 0.161 B. 69.0 C. 0.0312 D. 4.04 Where does the comma go? I To make sure I remembered my backpack I placed it by the front door e front door I need help with this What Should I do in Ramadan to plan the whole week?