Answer:
→ LiF
Explanation:
[tex]{ \rm{2Li _{(s)} + F _{2(g)} \dashrightarrow \: 2LiF _{(s)} }}[/tex]
Answer:
[tex]Lithium⟼Li+Fluorine⟼F=LiF[/tex]
A 95,000g refrigerator is located on the 70th floor of a skyscraper (300 meters above the ground) What is the
potential energy of the refrigerator?
Answer:
285 kJ
Explanation:
potential energy
= m g h
= 95,000 g × 10 m/s² × 300 meters
= 95 kg × 10 m/s² × 300 meters
= 950 kgm/s² × 300 meters
= 285,000 J
= 285 kJ
when an electron moves from a higher orbit to a lower one does it always follow the same path explained
Yes, electron follows the same path when it absorb and loses energy.
Yes, when an electron moves from a higher orbit to a lower orbit it always follow the same path as it moves from a lower orbit to a higher orbit. When electron absorb energy it has the power to move from lower orbit to higher orbit or energy level.
While on the other hand, when an electron loses that energy, it comes back to its original position from which it moves earlier when it absorb energy so we conclude that electron follows the same path when it absorb and loses energy.
Learn more: https://brainly.com/question/24962163
the modern periodic table is organized by increasing ______________ ___________.
Answer:
atomic number.
Explanation:
Answer:
Atomic number
Explanation:
The modern periodic table lists the elements in order of increasing atomic number (the number of protons in the nucleus of an atom).
PLS MARK BRAINLIEST
A solar eclipse occurs during the day and can occur only during what phase of the moon?
New moon
Full moon
Answer:
New moon
Explanation:
Answer:
it is new moon
Explanation: im just smart like that
A lithium (Li) atom has 1 valence electron. Which of the following would be the most likely way for a lithium atom to become stable?
Answer:
Lithium will lose 1 electron in order to become stable
Answer:
lithium has 3 electrons so it has 3 protons and 3 electrons two electrons will shell 1 and then it will shell 2
Explanation:
this is what i learned
hope it helps
The electronic structure 1s22s22p63523p64523d8 refers to the ground state of
Kr.
Ni.
Pd.
Fe.
none of the above.
Previous
The given electronic configuration 1s²2s²2p⁶3s²3p⁶4s²3d⁸ is the Nickel (Ni). Therefore, option (B) is correct.
What is an electronic configuration?The electron configuration can be explained as electrons being filled in different energy levels of an atom of a particular element. In the electron configuration, the number of electrons is usually written as a superscript of atomic subshells. For example, the electron configuration of Oxygen is written as 1s²2s²2p⁴.
The sequence of fully filled subshells that correspond to the electronic configuration of a noble gas is denoted by square brackets. The principal quantum number (n) can be used to evaluate the maximum number of electrons in an electron shell.
The value of 2n² is given the maximum number of electrons. The atomic orbitals at low energy must be filled first occupying an orbital with a higher energy level.
The total number of electrons filled in the given electronic configuration 1s²2s²2p⁶3s²3p⁶4s²3d⁸ is 28. The atomic number of Nickel is 28 therefore it is the configuration of Nickel.
Learn more about electronic configuration, here:
brainly.com/question/5624100
#SPJ2
if 0.400 moles CO and 0.400 moles O2 completely react how many grams of CO2 are produces?
2CO+O2 becomes 2CO2
If 0.400 moles CO and 0.400 moles O2 completely react, 17.604 grams of CO2 would be produced.
First, let us look at the balanced equation of reaction:
[tex]2CO + O_2 ---> 2CO_2[/tex]
According to the equation, the mole ratio of CO and O2 is 2:1. But in reality, the mole ratio supplied is 1:1. Thus, CO is the limiting reactant while O2 is in excess.
Also from the equation, the ratio of CO consumed to that of CO2 produced is 1:1. Thus, 0.400 moles of CO2 would also be produced from 0.400 moles of CO.
Recall that: mole = mass/molar mass
Therefore, the mass in grams of CO2 that would be produced from 0.400 moles can be calculated as:
Mass = mole x molar mass
= 0.400 x 44.01
= 17.604 grams
More on calculating mass from number of moles can be found here: https://brainly.com/question/12513822
Air is made up of different gases, such as oxygen, nitrogen, and carbon dioxide.
Which statement best describes these three components of air?
O Oxygen, nitrogen, and carbon dioxide are all classified as pure substances.
Oxygen, nitrogen, and carbon dioxide cannot react with another substance.
Oxygen, nitrogen, and carbon dioxide are chemically bonded to one another.
O Oxygen, nitrogen, and carbon dioxide can be classified as elements.
idio
Answer:
option A
Explanation:
hope it helps
What tiles should I put in the box?
Answer:
true&answe
Explanation:
Scientists believe the Earth's inner core to be solid. This is probably due to extremes in:
pressure
depth
density
temperature
Previous
Speed can be though of as ____ the at which an object covers a _____.
A) speed,kilometer
B) Rate,distance
C) Forces, distance
D) Distance, rate
Pls help me with this question like now thank
Answer:
Speed can be thought of as the rate at which an object coverse distance
B) Reate distance
Plot the rate curved for the
Information Provided below and
Identity where the reaction is
Complete and peak of the reaction
Time in minutes 12345678
o
Volume of gas 0 5 10 15 20 25 30 30 35
Answer:
he combustion of ethane (C2H6) is represented by the equation: 2C2H6(g) + 7O2(g) 4CO2(g) + 6H2O(l). In this reaction: (a) the rate of consumption of ethane ...
Explanation:
he combustion of ethane (C2H6) is represented by the equation: 2C2H6(g) + 7O2(g) 4CO2(g) + 6H2O(l). In this reaction: (a) the rate of consumption of ethane ...
Liquid octane CH3(CH2)6CH3 will react with gaseous oxygen O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. Suppose 3.43 g of octane is mixed with 7.0 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
88 gram is the answer in 2 significant digits
One mole of octane gives 9 moles of water. Then, 3.43 g or 0.03 moles of octane will give 0.27 moles of water that is 4.86 g of water can be produced.
What is combustion reaction ?Combustion is a type of chemical reaction in which a gas reacts with oxygen to give carbon dioxide and water.
The combustion reaction of octane is given as follows:
[tex]\rm C_{8}H_{18} + \frac{25}{2}O_{2} \rightarrow 8CO_{2} + 9 H_{2}O[/tex]
As per this balanced chemical equation, one mole or 114 g of octane gives 9 moles of water.
no.of moles in 3.4 g of octane = 3.4 g/114 g = 0.03 moles.
no.of moles of water produced from 0.03 moles of octane :
= (0.03 × 9) = 0.27 moles.
Molar mass of water = 18 g/mol
then, mass of 0.27 moles = 0.27 × 18 =4.86 g.
Therefore, the maximum mass of water that could be produced here is 4.86 g.
Find more on combustion:
https://brainly.com/question/13153771
#SPJ2
COMO CREES QUE SE PODRIA SOLUCIONAR LA POBREZA ) SI NO SABEN NO CONTESTEN :( EL QUE ME AYUDE LE DOY CORONA POR FA VOR
Answer:
AUMENTA EL SALARIO MÍNIMO Y CREA MÁS EMPLEOS
Explanation:
If I have 1000ml of water and 10 ml of water, which will have the greater density? Why?
Answer:
1000 ml
Explanation:
hope it helpssssssss
Answer:
1000 ml because the bigger ml the greater density brainliest pls
What are some key properties of metalloids?
Explanation:
Metalloids have a solid state of matter. In general, metalloids have a metallic luster. Metalloids have low elasticity, they are very brittle. Middleweight are semi conducted elements, and they allow leave the average transmission of heat.hello there
looking for some help here,
Liquid A has a mass of 80 grams and a volume of 10 ml. What is liquid A's density?
1: 1.25 g/ml
2: 800 g/ml
3: 8 g/ml
4: 80 grams
help me please :(
D & 1 is also a option
why do ionic compound are good insulator ?
need a proper answer please
Answer:
Ionic compounds conduct electricity when molten or in aqueous solution, because their ions are free to move from place to place. Ionic compounds cannot conduct electricity when solid, as their ions are held in fixed positions and cannot move.
Explanation:
Pls mark me as the brainlest!!,
An element with three valence electrons would most likely be a
A. Metal
B. noble gas
C. non metal
D. metalloid
If an element has three valence electrons, it is most likely a metal.
In the periodic table, metals are found towards the left hand side of the table. Metals have fewer valence electrons than nonmetals. In the periodic table, there are more metallic than nonmetallic elements.
Metals of group 13 typically have three valence electrons. Hence, if an element has three valence electrons, it is most likely a metal of group 13.
Learn more: https://brainly.com/question/5624100
What are the subatomic particles of an atom, and where are they located in the atom? Be specific.
Answer:
120
Explanation:
just took test
which statement describes virginia's watershed i need this ASAP pls help
B: It has fewer than 10 total watersheds best describes
What is a watershed?A watershed is the area of land where all of the water that falls in it and drains off of it goes to a common outlet. All the land drains water into rivers that drain into the Chesapeake Bay, where it enters the Atlantic Ocean.
Why is it called a watershed?The area that drains into a single river is the watershed for that river.
Learn more about Watershed here
https://brainly.com/question/24813719
#SPJ2
Determine the number of moles of Al2O3 that contain 6.25 x 10^23 O atoms.
Answer:
1.04 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question
[tex]n = \frac{6.25 \times {10}^{23} }{6.02 \times {10}^{23} } = \frac{6.25}{6.02} \\ = 1.0382059[/tex]
We have the final answer as
1.04 molesHope this helps you
describe the structure of a typical metal such as iron ?
assaaap
Answer:
Metals consist of giant structures of atoms arranged in a regular pattern. The electrons from the outer shells of the metal atoms are delocalised , and are free to move through the whole structure. This sharing of delocalised electrons results in strong metallic bonding .
Explanation:
mark me as brainliest
please answer this correctly
Answer:
5: tomato and vinegar
6: air
What is the function of the load in
an electric circuit?
Help me join the name the muddled sentences
Answer:
did this help ?
Explanation:
He muddled his way through the opening verse and belted out the chorus, creating a schizophrenic performance.: The results included muddled avant-garde theatrical staging techniques and insensitive and maladroit portraits of African Americans .
What is the process whereby stars create elements heavier than hydrogen?
atomic growing
atom splitting
nucleosynthesis
hydrogenation
Answer:
nucleosynthesis
Explanation:
The correct answer is nucleosynthesis.
How do stars create heavier elements?After the hydrogen in the star's core is exhausted, the star can fuse helium to form progressively heavier elements, carbon and oxygen, and so on, until iron and nickel are formed. Up to this point, the fusion process releases energy. The formation of elements heavier than iron and nickel requires an input of energy.
What was the process of the formation of heavy elements?In a supernova explosion, neutron capture reactions take place (this is not fusion), leading to the formation of heavy elements. This is the reason why it is said that most of the stuff that we see around us comes from stars and supernovae (the heavy elements part).
Learn more about nucleosynthesis here https://brainly.com/question/20767918
#SPJ2
Reya is a neuroscientist who studies behaviors in mice. She is working on a project in which the mice are given a snack when they push a small button on the wall of their enclosure. At first, the mice don't understand
the connection between thebutton and the snack. In time, they leam to push the button whenever they want a snack. Reya's experiment an example of what type of conditioning?
A. operant
B. classical
C. magical
D. phantom
Answer:
It should be operant.
Explanation:
The mouse is associating a voluntary behavior in order to recieve the outcome, which is the snack.
multiple answers, Ion formed by Oxygen?
O2+
O2-
Oxide
Answer:
Explanation:The formation of the oxide ion, O
2−
(g), from oxygen atom requires first an exothermic and then an
endothermic step as shown below:
O(g)+e
−
→O
−
(g);Δ
f
H
⊖
=−141kJmol
−1
O
−
(g)+e
−
→O
2−
(g);Δ
f
H
⊖
=+780kJmol
−1
Thus, process of formation of O
2−
in gas phase is unfavourable even though O
2−
is isoelectronic with neon. It is due to the fact that: