Word Users According to a survey by Olsten Staffing Services, the percentage of companies reporting usage of Microsoft Word years since 1984 is given by $$ P(t)=\fra…
Word Users According to a survey by Olsten Staffing Services, the percentage of companies reporting usage of Microsoft Word years since 1984 is given by P(t) = 99.774/1+3.014e
(a) What is the growth rate in the percentage of Microsoft Word users?
(b) Use a graphing utility to graph P=P(t)
(c) What was the percentage of Microsoft Word users in 1990
(d) During what year did the percentage of Microsoft Word users reach 90%
(e) Explain why the numerator given in the model is reasonable. What does it imply?

The measure of center that would be best to use for this distribution is the median

If the distribution is generally symmetric, the mean is the appropriate measure of center to use. This is because the mean considers every value in the distribution and is affected equally by each value.

As a result, if the dot plot has a skewed distribution, the median is the best measure of center to employ, whereas the mean is the best measure of center to use if the distribution is nearly symmetric.

Learn more about median on

https://brainly.com/question/14532771

#SPJ1

Answer:

Her balance would be $ 90,931.84.

Step-by-step explanation:

trust me

Answer: B

Step-by-step explanation: red to blue

Answer: B

Step-by-step explanation:

Because it asks for you to create a ratio comparing red to blue, you need to order it that way. Since there are 5 reds and 6 blues, you list the 5 in the ratio before you list the 6. It would end up looking like this:

5:6

The image of the point after the reflection over the y-axis is (-3, 6)

For any point of the form (x, y), a reflection across the y-axis just changes the sign of the x-value.

Then the reflection gives:

(x, y) ---> (-x, y)

Here we apply this reflection to the point (3, 6), then we will get:

(3, 6) ---> (-3, 6)

That is the image after the reflection over the y-axis, then the correct option is the fourth one.

Learn more about reflections at:

https://brainly.com/question/4289712

#SPJ1

A) The corresponding unit rate for each package is,

For Cannie cakes;

⇒ $1.85

Bark bits;

⇒ $2.25

Woofy Waffles;

⇒ $1.9

B) The best buy by the units rates is, Cannie cakes.

We have to given that;

Jeremiah needed dog food for his new pippy.

Now, We get;

A) The corresponding unit rate for each package is,

For Cannie cakes;

⇒ 74/40

⇒ $1.85

Bark bits;

⇒ 27/12

⇒ $2.25

Woofy Waffles;

⇒ 76 / 40

⇒ $1.9

Hence, We get;

B) The best buy by the units rates is, Cannie cakes.

Learn more about the divide visit:

https://brainly.com/question/28119824

#SPJ1

Answer:

Step-by-step explanation:

Yes, there is a rigid transformation that can map triangle ΔABC to triangle ΔDEC.

A rigid transformation is a transformation that preserves the size, shape, and orientation of a figure. It includes translations, rotations, and reflections. In order for triangle ΔABC to be mapped to triangle ΔDEC, the two triangles must have the same size, shape, and orientation. This can be achieved through a combination of translation, rotation, and/or reflection. For example, if triangle ΔABC is translated by a certain vector and then rotated or reflected, it can be mapped onto triangle ΔDEC.

For more information on rigid transformations and how they can be used to map figures, refer to this article  https://brainly.in/question/2655412.

To prove that when a sphere is moved about its center, it is always possible to find a diameter of the sphere whose direction in the displaced position is the same as in the initial position using orthogonal properties, follow these steps:

1. Consider a sphere with center O and any diameter AB.
2. When the sphere is moved about its center, the center O remains fixed.
3. Rotate the sphere such that diameter AB is now in a new position A'B'.
4. Since the sphere has been rotated about its center, the orthogonal properties are preserved. This means that the planes that are perpendicular to the diameter at the center O remain unchanged.
5. The orthogonal planes to diameter AB intersect at the center O and form a fixed line in space.
6. Now, rotate the sphere again, such that diameter A'B' returns to its initial position as AB. This rotation is possible because the orthogonal planes and their intersection (the fixed line) are preserved.
7. Since diameter A'B' has returned to the initial position of AB, it proves that it is always possible to find a diameter of the sphere whose direction in the displaced position is the same as in the initial position.

Learn more about orthogonal properties:

https://brainly.com/question/31046862

#SPJ11

Answer:

  (b)  2

Step-by-step explanation:

You want the mean absolute deviation of the data ...

  {12, 10, 10, 8, 6, 7, 7, 12}

The mean absolute deviation (MAD) is the mean of the absolute values of the differences between the data values and their mean. The calculation of this is shown in the attachment.

The mean absolute deviation is 2.

<95141404393>

Answer: use 2 π | b | , where is the frequency.

Step-by-step explanation:

To find the period of any sine or cosine function, use 2 π | b | , where is the frequency. Using the first graph above, this is a valid formula: 2 π 1 2 = 2 π ⋅ 2 = 4 π .

Hope that helps

Answer:

9.22

Step-by-step explanation:

pythagorean theorem is C squared= A squared +B squared. because C is 11 and if you square 11 its 121 and 6 squared is 36 so if u do 121-36 its 85

and if u root 85 it comes out as 9.22

The area of rectangle DEFG is 16 square units and its perimeter is 12 units.

To find the area, we can use the formula: Area = length x width We can find the length and width by calculating the distance between the coordinates of opposite sides of the rectangle.

Length = EF =

[tex] \sqrt{} ((2-1)^2 + (1-3)^2)[/tex]

=

[tex] \sqrt{} (2 + 4) = \sqrt{} (6)[/tex]

Width = DG =

[tex] \sqrt{} ((-3+2)^2 + (1+1)^2) = \sqrt{} (2 + 4) = \sqrt{} (6)[/tex]

The area of rectangle DEFG = length x width =

[tex] \sqrt{} (6) x \sqrt{} (6)[/tex]

= 6 x 2 = 16 square units.

To find the perimeter, we can add up the lengths of all four sides: Perimeter = DE + EF + FG + GD

DE =

[tex] \sqrt{} ((1+3)^2 + (-3+(-1))^2) = \sqrt{} (16 + 4) = \sqrt{} (20)[/tex]

EF =

[tex] \sqrt{} ((2-1)^2 + (1-3)^2) = \sqrt{} (2 + 4) = \sqrt{} (6)[/tex]

FG =

[tex] \sqrt{} ((2+2)^2 + (1+1)^2) = \sqrt{} (16 + 4) = \sqrt{} (20)[/tex]

GD =

[tex] \sqrt{} ((-2+3)^2 + (-1-1)^2) = \sqrt{} (1 + 4) = \sqrt{} (5)[/tex]

The perimeter of rectangle DEFG =

[tex] \sqrt{} (20) + \sqrt{} (6) + \sqrt{} (20) + \sqrt{} (5) [/tex]= 12 units.

Hence, The area of the rectangle is 16 square units and the perimeter is 12 units.

Learn more about rectangle here:

https://brainly.com/question/30232870

#SPJ4

Each gift tag costs $0.16.

We have,

To solve this problem, we need to determine the price of each gift tag given that it costs $1.12 to buy 7 tags.

Let "x" be the price of each gift tag in dollars.

Then, if we buy 7 tags, the total cost would be 7 times the price of each tag:

7x

We know that this total cost is $1.12, so we can set up a proportion:

7x / 1 = 1.12 / 1

Simplifying, we get:

7x = 1.12

Now we can solve for "x" by dividing both sides by 7:

x = 1.12 / 7

Simplifying, we get:

x = 0.16

Therefore,

Each gift tag costs $0.16.

Learn more about expressions here:

https://brainly.com/question/3118662

#SPJ1

The simplified value of the expression is 12km³.

We have,

[tex]12k^2m^8 \div 4km^5[/tex]

This can be written as:

[tex]\frac{12k^2m^8}{ 4km^5}[/tex]

Canceling common expression.

= 12km³

Thus,

The simplified value of the expression is 12km³.

Learn more about expressions here:

https://brainly.com/question/3118662

#SPJ1

The given function is decreasing on the interval (-1, 3/2).

To determine the intervals on which a function is decreasing, we need to find the values of x for which the function's derivative is negative. If the derivative is negative, then the function is decreasing.

Let's consider each option:

A. (–[infinity], –1) ∪ (0,[infinity])

To find the derivative of the function, we first need to find the function itself. Without knowing the function, we cannot determine the derivative or the intervals on which it is decreasing.

B. (1, [infinity])

Again, we need to know the function to determine its derivative and the intervals on which it is decreasing.

C. (–[infinity], –1) ∪ (1, [infinity])

Similarly, we need to know the function to determine its derivative and the intervals on which it is decreasing.

D. (–1, 0)

Let's assume the function is f(x). To find its derivative, we can use the power rule of differentiation, which states that if f(x) = x^n, then f'(x) = nx^(n-1).

If the given function is decreasing on the interval (-1, 0), then its derivative, f'(x), must be negative on that interval. Therefore, we can set up the inequality f'(x) < 0 and solve for x.

Let's first find the derivative of the function:

f(x) = x^2 - 3x + 2

f'(x) = 2x - 3

Now we can set up the inequality:

2x - 3 < 0

Solving for x, we get:

x < 3/2

So the function is decreasing on the interval (-1, 3/2).

To learn more about interval

https://brainly.com/question/14641200

#SPJ4

The value of GH in the rectangle is 60 units.

A rectangle is quadrilateral with opposite sides equal to each other and opposite sides parallel to each other.

Therefore, the diagonal of the rectangle divides the rectangle into congruent triangles.

Therefore,

DH = GH

4w + 20 = 6w

subtract 4w from both sides of the equation

4w  - 4w + 20 = 6w - 4w

20 = 2w

divide both sides of the equation by 2

w  =20 / 2

w = 10

Therefore,

GH  = 6(10)

GH = 60 units

learn more on rectangle here: brainly.com/question/27668188

#SPJ1

Check the picture below.

Answer:

The answer to your problem is, A. 5

Step-by-step explanation:

What is an outlier?

What just like it says an outlier it something “ away “ or “ out of civilization of its fellow numbers “

You can see that the hours of 8 - 10 they are all bunched up together

But you can see hour 5 seems a bit lonely

Which then we call he outlier

Thus the answer to your problem is, A. 5

From the provided data, it can be deduced that "Butterflies and Ladybugs" is seemingly preferred over the other option in question.

Confirmation of this determination is available because sample 2 received a greater number of votes for "Butterflies and Ladybugs" than sample 1 did. Additionally, the total amount of votes awarded to "Butterflies and Ladybugs" was more pronounced compared to the two remaining choices within sample 2.

One should not make assertions from this dataset stating that "Butterflies and Ladybugs" are the most favored choice overall or universally.

This claim cannot be verified due to the small size of the research survey as solely two samples were utilized; therefore, we may infer that these findings could potentially vary if an alternative method or larger experiment was adopted.

Learn more about data on

https://brainly.com/question/26711803

#SPJ1

To determine how attractive a particular market is using the BCG portfolio analysis, Market profit potential is(are) established as the vertical axis.

Market profit potential is established as the vertical axis in the BCG portfolio analysis to determine how attractive a particular market is.

The BCG (Boston Consulting Group) portfolio analysis is a framework used to analyze a company's business units or product lines based on their market growth rate and relative market share. The relative market share is established as the horizontal axis, and the market growth rate is established as the vertical axis. The resulting four quadrants are named: "Stars," "Cash Cows," "Question Marks," and "Dogs."

However, in some modified versions of the BCG matrix, such as the GE-McKinsey Matrix, the vertical axis may be replaced with other factors such as market attractiveness, industry strength, or competitive position. Nevertheless, in the original BCG matrix, the vertical axis represents the market growth rate, which is a measure of the market's potential for growth and profitability.

To know more about Market profit potential  refer here:

https://brainly.com/question/30205495

#SPJ11

Answer:

We can find the LCM (Least Common Multiple) of these numbers by finding the prime factorization of each number and then multiplying the highest power of each prime factor together.

Prime factorization of 2: 2

Prime factorization of 4: 2^2

Prime factorization of 6: 2 * 3

Prime factorization of 9: 3^2

Prime factorization of 10: 2 * 5

The highest power of 2 is 2^2.

The highest power of 3 is 3^2.

The highest power of 5 is 5^1.

Multiplying these numbers together gives us:

2^2 * 3^2 * 5^1 = 180

Therefore, the LCM of 2, 4, 6, 9, and 10 is 180.

Step-by-step explanation:

Answer:

To calculate the value of the business in 3 years, we use the formula for compound interest:

A = P * (1 + r/100)^(t)

where A is the final amount, P is the initial amount, r is the annual interest rate as a decimal,  t is the number of years.

A = $175,000 * (1 + 0.13/1)^(1*3) = $268,418.60

Therefore, the value of the business in 3 years is $268,418.60. Option C is the correct answer.

The projection of f onto the subspace W, we need to take the inner product of f with each of the basis vectors in W and multiply by the basis vectors. Then we add the results together. Therefore, the projection of f onto W is 2/3 + √2.

So, first we need to find the inner products of f with g1 and g2:

(f, g1) = integral -1 to 1, f(x)g1(x) dx

= integral -1 to 1, ([tex]x^2[/tex] + 5x)(1/√2) dx

= (1/√2) integral -1 to 1, [tex]x^2[/tex] dx + (5/√2) integral -1 to 1, x dx

= (1/√2) (2/3) + (5/√2) (0)

= √2/3

(f, g2) = integral -1 to 1, f(x)g2(x) dx

= integral -1 to 1, ([tex]x^2[/tex] + 5x)√(3/2) dx

= √(3/2) integral -1 to 1, [tex]x^2[/tex] dx + √(3/2) integral -1 to 1, 5x dx

= √(3/2) (2/3) + √(3/2) (0)

= √(2/3)

Now we can find the projection of f onto W:

projW(f) = (f, g1) g1 + (f, g2) g2

= (√2/3) (1/√2) + (√(2/3)) (√(3/2))

= 2/3 + √2

Learn more about projection visit: brainly.com/question/3703881

#SPJ4

Mike's measurement therefore had a percent error of 9.57% .

Finding the discrepancy between Milk's measurement and the real height of the art frame, dividing it by the actual height, and multiplying the result by 100 will get the percent inaccuracy.

Mike's measurement and the real height differ in the following ways:

6 feet - 7 feet = 0.67 feet.

We divide this difference by the actual height to determine the percent error:

7 feet / 0.67 feet is 0.0957

The percentage is finally calculated by multiplying by 100:

0.0957 x 100 = 9.57%

Mike's measurement therefore had a percent error of 9.57%. This indicates that the difference between his measurement and the actual height of the art frame was roughly 9.57%.

To learn more about measurement visit:

https://brainly.com/question/4725561

#SPJ4

The length of line segment EB is Option C- 65 units .

In a parallelogram, opposite sides are equal. Therefore, AE = CB = p-8 and CE = AB = 2p-58. Also, AD and BE are diagonals of the parallelogram, and they bisect each other. Thus, we can say that DE = EB. So, we have DE = p+15 and EB = p+15.

AE + EB + CE + DE = perimeter of parallelogram

(p-8) + (p+15) + (2p-58) + (p+15) = 4p - 56

4p - 56 = 4(p - 14)

Therefore, the perimeter of the parallelogram is 4(p-14). Since opposite sides are equal in a parallelogram, we can say that:

2(p-8) + 2(2p-58) = 4(p-14)

p = 50

Substituting the value of p in the equation EB = p+15, we get:

EB = 50 + 15 = 65.

However, we need to remember that DE = EB. Therefore, the length of line segment EB is 65 units (Option C).

learn more about parallelogram here:

https://brainly.com/question/1563728

#SPJ4

the complete question is:

AE = p 8, CE = 2p 58, and DE = p + 15 in the parallelogram illustrated. How long is the line segment EB?

A - 40units

B.50 units

C.65 units

D.73 units

Answer:

c) 65 units

Step-by-step explanation:

2023 on edge

X(t) = Xo/[1 + (1 - Xo)/Xo exp(-[r - o^2/2]t - oW(t))]

E[X(t)] = Xo/(1 + (1 - Xo)/Xo exp(-r t)),

V[X(t)] = Xo^2 exp(rt)/(1 + (1 - Xo)/Xo exp(rt))^2 - Xo^2/(1 + (1 - Xo)/Xo exp(-r t))^2.

The given equation is a stochastic differential equation (SDE) of the form dX(t) = a(X(t))dt + b(X(t))dW(t), where W(t) is a Wiener process (Brownian motion), a(X(t)) = rX(t)(1 - X(t)), b(X(t)) = oX(t), and Xo is the initial condition.

To solve this SDE, we use Itô's lemma, which states that for a function f(X(t)) of a stochastic process X(t), the SDE for f(X(t)) is given by df(X(t)) = (∂f/∂t)dt + (∂f/∂X)dX(t) + 1/2(∂^2f/∂X^2)(dX(t))^2.

Applying Itô's lemma to the function f(X(t)) = ln(X(t)/(1 - X(t))), we get df(X(t)) = [1/X(t) + 1/(1 - X(t))]dX(t) - 1/2[X(t)^(-2) + (1 - X(t))^(-2)](dX(t))^2.

Substituting a(X(t)) and b(X(t)) in the above expression, we get d[f(X(t))] = [r(1 - 2X(t))dt + o(1 - 2X(t))dW(t)] - 1/2[r^2X(t)(1 - X(t))^2 + o^2X(t)^2]dt.

Integrating both sides of the above expression from time 0 to t and using the initial condition X(0) = Xo, we get ln[X(t)/(1 - X(t))] = ln[Xo/(1 - Xo)] + [r - o^2/2]t + oW(t).

Solving for X(t), we get X(t) = Xo/[1 + (1 - Xo)/Xo exp(-[r - o^2/2]t - oW(t))].

Taking the expectation and variance of X(t), we get:

E[X(t)] = Xo/(1 + (1 - Xo)/Xo exp(-r t)),

V[X(t)] = Xo^2 exp(rt)/(1 + (1 - Xo)/Xo exp(rt))^2 - Xo^2/(1 + (1 - Xo)/Xo exp(-r t))^2.

Learn more about E[X(t)] at https://brainly.com/question/30906862

#SPJ11

"it" refers to marketing.

The statement emphasizes that marketing is present in various aspects of our lives and is supported by a massive network of people and activities that compete for our attention and purchases.

Marketing refers to any actions a company takes to attract an audience to the company's product or services through high-quality messaging. Marketing aims to deliver standalone value for prospects and consumers through content, with the long-term goal of demonstrating product value, strengthening brand loyalty, and ultimately increasing sales.

Marketinghttps://brainly.com/question/28849521

#SPJ11

Step-by-step explanation:  One way to measure an arc is with degrees. The measure of an arc is equal to the measure of its corresponding central angle. Below, m D C ^ = 70 ∘ and m G H ^ = 70 ∘ . When you measure an arc in degrees, it tells you the relative size of the arc compared to the whole circle.

Answer:

x > 10

Step-by-step explanation:

Subtract 0.75 from 0.81.

This gives you 0.06

Then divide, by the coefficient of x, 0.006

x > 10

Answer:

x > 10

Step-by-step explanation:

0.75 + 0.006x > 0.81

-.75                     -.75

0.006x > 0.06

----------     -------

0.006      0.006

x > 10