growth of new minerals, changes in mineral size and shape ,creation of foliation ,phase change of minerals. All options are correct.
All of the listed outcomes can result from metamorphic change. Metamorphism is the process by which rocks are changed by heat, pressure, and/or chemical reactions, and this process can result in a variety of changes to the rock's mineralogy, texture, and structure. One common outcome of metamorphism is the growth of new minerals. This can occur when existing minerals in the rock recrystallize or when new minerals form as a result of chemical reactions between the rock and fluids that have infiltrated it.
Another outcome of metamorphism is changes in mineral size and shape. This can occur as a result of recrystallization or reorientation of mineral grains in response to the applied stresses of metamorphism. Foliation is a type of texture that develops in some metamorphic rocks as a result of the preferred orientation of mineral grains. This can occur when a rock is subjected to directional stress, which causes the mineral grains to align and form a planar fabric or "foliation". Finally, metamorphism can also result in phase changes of minerals, meaning that the mineral undergoes a transformation from one crystal structure to another. This can occur as a result of changes in temperature, pressure, or the presence of fluids that alter the chemical environment of the rock.
Learn more about mineral here:
https://brainly.com/question/18078524
#SPJ11
Describe the study area in terms of it's exact position (degrees,minutes and second).
Our Description is made up of a wide range of details such as geographic location, climatic conditions, social amenities, plant life, populace density, moisture level, temperature, landscape, etc..
What is the study area?Your study area for a case study should be the study area, which is typically expressed in geographical coordinates using degrees, minutes, and seconds. The geographic location of the study area can be determined by calculating its position using degrees, minutes, and seconds.
In order to investigate a region, an person must possess knowledge regarding geographical and additional variables. A region is examined for diverse objectives. The knowledge required for studying an area depends on its purpose and there are several factors to consider.
Learn more about study area from
https://brainly.com/question/25257437
#SPJ1
what is geography definition
Two planets are orbiting a star. Planet A is 2 times further away from the star than Planet B is. Therefore, _____________.
Question 1 options:
Planet A receives 2 times more radiation than Planet B
Planet A receives 2 times less radiation than Planet B
Planet A receives 4 times more radiation than Planet B
Planet A receives 4 times less radiation than Planet B
Two planets are orbiting a star. Planet A is 2 times further away from the star than Planet B is. Therefore, D. Planet A receives 4 times less radiation than Planet B
Why is radiation received this way ?Inversely related to the square of their distance, a planet receives reduced radiation from its star as it is set further away.
Thus, Planet A which is twice as distant as Planet B shall only obtain one-quarter, or four times less, of the amount of radiation reaching the latter. Said differently, Planet A shall acquire four occasions lesser radiation compared to Planet B.
Find out more on radiation at https://brainly.com/question/24177641
#SPJ1
What has been done to prevent another lethal buildup of carbon dioxide in Lake Nyos?
To prevent another lethal buildup of carbon dioxide in Lake Nyos, a degassing system has been installed. This system involves the use of pipes to siphon water from the bottom of the lake, where the carbon dioxide is highly concentrated.
As the water rises through the pipes, the dissolved carbon dioxide gas is released into the atmosphere in a controlled manner, significantly reducing the risk of a sudden, catastrophic release. This degassing system has been successful in decreasing the concentration of dissolved carbon dioxide in the lake, thereby minimizing the potential for a lethal gas release event. Additionally, ongoing monitoring and research efforts are in place to better understand the dynamics of the lake and the factors that contribute to the buildup of carbon dioxide. Further measures include educating local communities about the risks associated with Lake Nyos and establishing evacuation plans in case of an emergency. This combination of technological, scientific, and community-based approaches has been crucial in mitigating the dangers posed by a potential lethal buildup of carbon dioxide in Lake Nyos.
Learn more about carbon dioxide here
https://brainly.com/question/25385913
#SPJ11
A decade ago, the Long Valley caldera was releasing 1,000 tons of carbon dioxide a day. Today, it is only releasing 300 tons a day. This suggests that ______.
This suggests that the decrease in carbon dioxide emissions from the Long Valley caldera, from 1,000 tons per day a decade ago to 300 tons per day today, suggests that there has been a decrease in volcanic activity in the area.
The Long Valley caldera's reduction in carbon dioxide emissions from 1,000 tonnes per day ten years ago to 300 tonnes per day today shows that the region's volcanic activity has decreased.
One of the many gases that are released from volcanic vents is carbon dioxide, and this emission is frequently indicative of volcanic activity. As a result, the Long Valley caldera's decreasing carbon dioxide emissions suggest that the region's volcanic activity has decreased over the past ten years.
However, given that volcanic systems can be unexpected and subject to fast change, it is still crucial to keep an eye out for any indications of resurgent activity.
For such more question on carbon dioxide:
https://brainly.com/question/31442432
#SPJ11
If a sedimentary rock consists of solid fragments and grains broken off of preexisting rocks that are cemented together, is it
A. clastic
B. biochemical
C. organic
D. chemical
Clastic sedimentary rocks are formed from the accumulation of fragments or grains of preexisting rocks that have been transported and deposited by water, wind, or ice. These fragments are then cemented together by minerals such as quartz, calcite, or clay.
The size, shape, and sorting of the grains can provide information about the environment in which the sediment was deposited. Clastic sedimentary rocks can be further classified based on the size of the grains, such as sandstone, shale, or conglomerate. In contrast, biochemical sedimentary rocks are formed from the accumulation of organic debris such as shells, coral, or algae. Organic sedimentary rocks are formed from the accumulation of organic matter such as plant debris or animal remains. Chemical sedimentary rocks are formed from the precipitation of minerals from a solution, such as limestone or halite. So, in summary, if a sedimentary rock consists of solid fragments and grains broken off of preexisting rocks that are cemented together, it is a clastic sedimentary rock.
Know more about sedimentary rocks here:
https://brainly.com/question/10709497
#SPJ11
which of following igneous rocks can be composed of fragments?
a. tuff
b. scoria
c. volcanic breccia
d. all of these
All of these igneous rocks (tuff, scoria, and volcanic breccia) can be composed of fragments that have been compacted and cemented together or welded together by volcanic ash and other materials.
All of these igneous rocks can be composed of fragments:
Tuff is a volcanic rock that is composed of volcanic ash, pumice, and other fragmental materials that have been compacted and cemented together.Scoria is a volcanic rock that is composed of fragments of volcanic glass and other materials that have been ejected from a volcano and have cooled and solidified in the air.Volcanic breccia is a volcanic rock that is composed of large, angular fragments of volcanic rock that have been welded together by volcanic ash and other materials.All three of these rocks are examples of fragmental or pyroclastic igneous rocks, which are formed from the accumulation and consolidation of volcanic fragments. These rocks can provide important information about volcanic eruptions and the geological history of the region.
Learn more about geological here:
https://brainly.com/question/5634603
#SPJ11
What is a magma chamber called after the Coduit has solicited and been exposed where by erosion?
When a conduit has been exposed by erosion and the magma has been depleted from the chamber, it is typically called a volcanic neck or a volcanic plug. This is because the hardened magma within the conduit is resistant to erosion, leaving behind a column of rock that may stand out from the surrounding landscape.
Over time, weathering and erosion can wear away the surrounding rock, leaving only the volcanic neck or plug behind. These features can provide important clues about the history of volcanic activity in a particular area, and they may also be associated with other features such as lava flows or volcanic vents.
Overall, volcanic necks and plugs are just one of the many fascinating and complex features associated with the movement and behavior of magma deep within the Earth's crust.
Learn more about conduit here:
https://brainly.com/question/19342587
#SPJ11
When was the Moscow Test Ban Treaty signed?
The Moscow Test Ban Treaty was signed on August 5, 1963. This treaty was signed by the United States, Soviet Union, and United Kingdom, and it banned all nuclear weapons tests in the atmosphere, underwater, and in space.
The signing of this treaty was a major milestone in the effort to control nuclear weapons during the Cold War. The treaty also paved the way for further disarmament talks and negotiations, and it helped to establish the framework for future arms control agreements. The Moscow Test Ban Treaty remains an important part of the international effort to prevent the spread of nuclear weapons and reduce the risk of nuclear war. The Moscow Test Ban Treaty, also known as the Partial Test Ban Treaty (PTBT), was signed on August 5, 1963. This agreement marked a significant milestone in international efforts to control nuclear weapons testing. The treaty prohibited nuclear tests in the atmosphere, outer space, and underwater, aiming to reduce the environmental and public health risks associated with radioactive fallout. The United States, Soviet Union, and the United Kingdom were the initial signatories, with many other countries joining over time. The treaty contributed to increased cooperation and dialogue among nations, paving the way for future arms control and disarmament measures.
Learn more about United States here
https://brainly.com/question/25899399
#SPJ11
A worm burrow is an example of which type of fossilization?
A) Cast and mold
B) Carbonization
C) Trace fossil
D) Mummification
C) Trace fossil. A worm burrow is not the actual physical remains of the worm, but rather a trace left behind by its activity. Trace fossils include burrows, tracks, and other evidence of an organism's presence, but do not involve the preservation of the actual body.
A trace fossil is formed when the evidence of an organism's activity, such as a worm burrow, is preserved in the fossil record. This is different from carbonization, which involves the preservation of organic material through the conversion of its original components into a carbon film, and mummification, which is the preservation of a soft tissue through drying or chemical processes. Carbonization involves the compression and preservation of organic matter into a thin layer of carbon, while mummification involves the desiccation and preservation of a body through natural or artificial means.
learn more about Carbonization here: brainly.com/question/13719781
#SPJ11
Please Answer This! HURRRRY!
Human Geo Chapter 6
True or False: The distribution of ethnicities in the United States varies depending upon religion, culture, and race.
True or False: Ethnicities can be clustered in cities or in particular neighborhoods within a city.
True or False: One of the most powerful forces with regard to the location of a group is the group members’ ability to pay for the space they are occupying.
True or False: Geography of gender does not just refer to biology. Rather, it is related to the social situation of individuals.
Answer:
1. True
2. True
3. True
4. False
Explanation:
Primary lahars were generated during the Nevado del Ruiz eruption in 1985 when ______.
Primary lahars were generated during the Nevado del Ruiz eruption in 1985 when the volcano's summit crater collapsed, triggering a massive release of pyroclastic material and meltwater from the glacier that covered its peak.
The eruption sent hot ash, gas, and pumice down the volcano's slopes at high speeds, melting the glacier and causing a catastrophic mudflow that swept through the surrounding towns and valleys, killing over 23,000 people. The lahars were composed of a mixture of volcanic debris, water, and sediment that rapidly moved down the steep terrain, picking up additional material and debris along the way. The lahars were particularly destructive due to their speed and volume, as they overwhelmed everything in their path, destroying buildings, bridges, and roads. The disaster caused by the Nevado del Ruiz eruption led to significant changes in volcano monitoring and disaster response strategies, and it serves as a cautionary tale for communities living near active volcanoes worldwide.
Know more about Nevado del Ruiz here:
https://brainly.com/question/11240209
#SPJ11
American movement westward led to encroachment on American Indian land. explain how the treaty of Greenville settled conflict between settlers and American Indians
The American movement westward during the 18th and 19th centuries often led to encroachment on American Indian land, which frequently resulted in conflict between settlers and Native American tribes.
In an effort to address these conflicts, the Treaty of Greenville was signed in 1795 between the United States government and several Native American tribes, including the Wyandot, Delaware, Shawnee, and others. The treaty established a boundary line between the United States and Native American lands, which aimed to prevent further encroachment by settlers. Additionally, the treaty provided for the payment of annuities to Native American tribes, which helped to ease tensions and promote peaceful relations between the two groups. While the treaty was not perfect and did not completely resolve all conflicts between settlers and Native Americans, it did provide a framework for peaceful coexistence and helped to prevent further violence and land disputes.
The Treaty of Greenville, signed in 1795, was an agreement between American settlers and American Indians that helped settle conflicts arising from westward expansion. This treaty established a boundary line, separating American Indian lands from the areas open to American settlement. As a result, it temporarily reduced tensions between the two groups, allowing for a more peaceful coexistence. However, it's important to note that encroachment on American Indian lands continued in later years, leading to further conflicts and displacement.
Visit here to learn more about Native American brainly.com/question/8678061
#SPJ11
proximity to inputs can be beneficial to manufacturers when:
a. access to consumers is made difficult by remote locations.
b. other site factors are more expensive than previously thought.
c. access to markets is threatened by dangerous weather conditions.
d. their raw materials are more expensive to transport than their products
e. their products are more expensive to transport than their raw materials.
Proximity to inputs can be beneficial to manufacturers when:
a. access to consumers is made difficult by remote locations.Benefit of being close to input to manufacturersManufacturers can benefit from being close to their inputs, such as raw materials, when transporting these inputs carries a higher cost than delivering finished products.
Transportation costs form a significant portion of the total production expenses for manufacturers. The location of raw materials close to the manufacturing unit reduces transportation costs and results in lower overall prices and greater profitability.
In contrast, if raw materials are located far from manufacturing sites and freight charges run high, substantial expenses could be added to the production process.
Learn more about manufacturers at
https://brainly.com/question/13440987
#SPJ1
1. Name the three types of rock contacts, and describe how you would distinguish among them on a geologic map.2. How might topography affect the appearance of a geologic map?3. How would you distinguish between a normal fault and a reverse fault based upon the surficial exposure of geologic rock formations (of known ages)?4. True or False? Anticlines have the youngest beds located in the center of the fold.
1. The three types of rock contacts are: Unconformity- a contact between two rock units where the upper unit is younger than the lower unit, and there is evidence of erosion or non-deposition between the two units. On a geologic map, an unconformity is represented by a wavy line with short perpendicular lines drawn across it.
Fault- a contact between two rock units where there has been displacement along the contact. On a geologic map, a fault is represented by a straight line with lines drawn perpendicular to it indicating the direction of displacement. Intrusion- a contact between an igneous rock unit and a surrounding rock unit where the igneous rock has been injected into the surrounding rock. On a geologic map, an intrusion is represented by a dotted or dashed line enclosing the area of the intrusion.
2. Topography can affect the appearance of a geologic map by influencing the visibility and accessibility of rock exposures. Steep slopes and deep valleys can make it difficult to identify and map rock units, while gently sloping terrain may provide better exposure and easier access for mapping.
3. A normal fault occurs when the hanging wall moves down relative to the footwall, while a reverse fault occurs when the hanging wall moves up relative to the footwall. Based on the surficial exposure of geologic rock formations (of known ages), a normal fault will have older rocks on the footwall side and younger rocks on the hanging wall side, while a reverse fault will have younger rocks on the footwall side and older rocks on the hanging wall side.
4. False. Anticlines have the oldest beds located in the center of the fold, while synclines have the youngest beds located in the center of the fold.
Learn more about rocks here:
https://brainly.com/question/11473096
#SPJ11
Since it was created 2,500 years ago, the longest Mount St. Helens has gone without erupting is ______ years.
Since it was created 2,500 years ago, the longest Mount St. Helens has gone without erupting is about 100 years.
Mount St. Helens is a volcano located in Washington State and is part of the Cascade Range. The volcano has a long history of activity, with its most recent eruption occurring in 2008. The longest period of dormancy at Mount St. Helens occurred between its last major eruption in 1800 and the start of a new eruptive cycle in 1980. During this time, the volcano remained dormant for approximately 100 years.
While 100 years may seem like a long time, it's important to remember that Mount St. Helens is still an active volcano and is closely monitored by scientists. Volcanic activity can be unpredictable, and Mount St. Helens is capable of producing explosive eruptions like the one that occurred in 1980. Despite the potential hazards, Mount St. Helens is also a valuable research site for scientists studying volcanoes and the processes that shape our planet.
Know more about Mount St. Helens here:
https://brainly.com/question/7602037
#SPJ11
The _______ alone determines the poison" is a principle that can be applied to the deaths of humans and animals near Lake Nyos from carbon dioxide.
What does rate of cooling have to do with grain size?
The rate of cooling plays a significant role in determining the grain size of a material. When a material is cooled at a faster rate, the atoms have less time to move and arrange themselves into a crystal lattice, resulting in smaller grain size.
On the other hand, a slower cooling rate allows the atoms more time to move and arrange themselves, resulting in larger grain size. This relationship between the rate of cooling and grain size can be observed in many materials, including metals and ceramics. For example, in steel production, rapid cooling during quenching results in small grain size, which improves the material's strength and toughness. In contrast, slower cooling rates during annealing result in larger grain size, which improves ductility and reduces the risk of fracture. In summary, the rate of cooling is an important factor in determining the grain size of a material. A faster cooling rate results in smaller grain size, while a slower cooling rate results in larger grain size. Understanding this relationship is critical for designing and producing materials with desired properties.
Learn more about rate of cooling here
https://brainly.com/question/13194637
#SPJ11
most igneous rocks in the Sierra-Nevada batholith formed form:
a. a hot spot beneath continental crust
b. continental rifting
c. ocean-continent convergence
d. transform faulting
Answer:
The answer is not provided in the given prompt. Can you please provide more information or context to your question?
Explanation:
Which two features are typically found associated with each other?
A)Domes and reverse faults
B)Synclines and anticlines
C)Monoclines and basins
D)Synclines and domes
E)Anticlines and normal faults
Synclines and anticlines are two features that are typically found associated with each other.
Synclines are downward folds in the rock layers, whereas anticlines are upward folds. They are usually found together in a symmetrical pattern. Anticlines are convex upward folds that are shaped like an arch, while synclines are concave downward folds that resemble a trough.
The presence of these two features can be useful in locating oil and gas deposits since they often occur in sedimentary rock formations where these resources are found.The formation of synclines and anticlines is a result of tectonic forces acting on the Earth's crust, causing it to bend and fold. When these forces are compressive, such as in convergent plate boundaries, they create folds like anticlines and synclines. In contrast, extensional forces, such as in divergent plate boundaries, create faults like normal faults.
Learn more about anticlines here:
https://brainly.com/question/25850559
#SPJ11
which of the following physical parameters show an increase from the headwaters to the mouth of a river? multiple select question. sediment load discharge channel size maximum grain size
The correct answers are 2) load discharge and 4) maximum grain size.
The headwaters of a river refer to the source or starting point of a river. It is the uppermost part of a river system, typically located in high elevations, such as mountains, hills, or plateaus. Headwaters can be a small stream, a spring, or a collection of several tributaries that merge together to form a river.
These physical parameters typically increase from the headwaters to the mouth of a river. Sediment may or may not increase depending on factors such as erosion and deposition, and channel size may not necessarily increase linearly from headwaters to mouth.
For further information on headwaters click: https://brainly.com/question/31257475
#SPJ11
__________ is the process by which a glacier slides due to ice melting at its base.
basal sliding is the process by which a glacier slides due to ice melting at its base. This happens because as the ice at the bottom of the glacier melts, it creates a layer of water that reduces friction between the glacier and the ground.
As a result, the glacier can move more easily and quickly. basal sliding is an important mechanism for glacier movement and plays a significant role in shaping landscapes. Basal sliding occurs when the ice at the base of a glacier melts, forming a thin layer of water. This water acts as a lubricant, reducing friction between the ice and the underlying rock, allowing the glacier to slide more easily. The melting can be caused by the pressure of the overlying ice, geothermal heat from the Earth, or frictional heat generated by the glacier's movement.
to know about basal sliding visit:
https://brainly.com/question/13834553
#SPJ11
10 original things about suniram that i can attach a photo of (for a project, i need 10 original things from sunrinam) please!!! 7 at least
Suniram is an anecdotal planet or measurement in a sci-fi or fantasy story.
Who is suniram?There can be different meaning to it such as:
Suniram could be a brand title for a line of feasible and eco-friendly items, such as clothing, embellishments, or domestic products. A picture of a nature scene or a individual wearing feasible clothing might be utilized to speak to this.
Suniram may be a anecdotal character or mascot for a company or organization. A picture of a cartoon character or a mascot outfit may well be utilized to speak to this.
Learn more about suniram from
https://brainly.com/question/2748145
#SPJ1
Mountains do not get infinitely high or exist forever because
A. their composition (continental crust) causes them to remain buoyant.
B. they experience orogenic collapse.
C. they are eventually subducted in the plate tectonics cycle.
D. the Earth's geothermal gradient is too low.
Mountains do not get infinitely high or exist forever because of their composition causes thru to remain buoyant (option a).
One of the reasons is that they experience orogenic collapse, which is the process of a mountain range slowly losing elevation over time due to erosion and other factors. The composition of the mountain also plays a role. Mountains are typically made of continental crust, which is less dense than the underlying mantle. This buoyancy causes them to rise up, but eventually, the weight of the mountain itself causes it to sink back down.
Another reason is that mountains are eventually subducted in the plate tectonics cycle. As the tectonic plates move and collide, mountains are formed, but eventually, they will be carried along with the plate and forced beneath the surface. This process, known as subduction, can lead to the complete destruction of the mountain range.
The Earth's geothermal gradient is also a factor in the life span of mountains. The geothermal gradient is the rate at which the Earth's temperature increases with depth. If the gradient is too low, then the rock beneath the mountain will not be hot enough to melt, causing the mountain to remain stable. However, if the gradient is too high, then the rock will melt and the mountain will be destroyed.
Learn more about mountains here:
https://brainly.com/question/10690247
#SPJ11
Explain how the Whiskey Rebellion is an example of the tensions between the east and frontier cultures
The Whiskey Rebellion is a perfect example of the tensions between the East and frontier cultures because it highlights the economic and political differences that existed between these two regions.
In the late 1700s, the eastern states were thriving and becoming more urbanized, while the frontier was still struggling economically and relied heavily on agriculture. When the federal government imposed a tax on whiskey production in 1791, the western farmers and distillers felt that the tax was unfair and discriminatory, as they were already struggling to make ends meet. The tax was seen as an attack on their livelihoods, and it sparked a rebellion that lasted for several years.
Overall, the Whiskey Rebellion was a clear demonstration of the economic and cultural differences between the East and the Frontier. The rebellion showed how these two regions had conflicting interests and priorities, and how the federal government had to navigate these tensions to maintain unity and stability in the young nation.
To learn more about Whiskey Rebellion, click here:
https://brainly.com/question/478473
#SPJ11
The Whiskey Rebellion was a conflict that occurred in the late 1700s between western farmers and the federal government over a tax on whiskey.
This rebellion is an example of the tensions between the east and frontier cultures because the western farmers felt that they were being unfairly targeted by the federal government, which was located primarily in the east. The farmers believed that the tax on whiskey was designed to benefit the wealthy eastern elites at the expense of the struggling farmers in the west.
Additionally, the western farmers had a different way of life than their eastern counterparts, with a greater emphasis on individual freedom and self-sufficiency. This clash of cultures ultimately led to the rebellion, which was put down by the federal government with force. The Whiskey Rebellion serves as a reminder of the ongoing tensions between the different regions and cultures that make up the United States.
Visit here to learn more about Whiskey Rebellion : https://brainly.com/question/478473
#SPJ11
what does the bible say about climate change?
The Bible does not directly address climate change because it is a modern scientific concept. But the Bible makes broader statements about mankind's relationship with the environment and our responsibility to care for it.
At Genesis 1:28, God commands Adam and Eve to “be fruitful and become many and fill the earth and subdue it, and have in subjection the fish of the sea and the birds of heaven and every living creature that is moving on the earth.” earth.” Global warming is a big trend in modern times. Many people question whether or not global warming is happening.
Some interpret this to mean that humans are given the responsibility to care for the earth and its creatures. Psalm 24:1 says, "The earth is the Lord's, and the fulness thereof, and they that dwell therein." This verse shows that the earth is God's sacred and precious creation, and we have a responsibility to care for it.
In addition, the book of Revelation describes the destruction of the earth and the suffering that will result. While this is a symbolic prophetic scripture, it means that humans will face consequences when we ignore our responsibilities towards the environment.
To learn more about global warming visit;
https://brainly.com/question/30644454
https://brainly.com/question/20240140
which of these are two different measures of the same stellar property? a. luminosity and temperature b. luminosity and apparent magnitude c. luminosity and absolute magnitude d. apparent and absolute magnitude
The two different measures of the same stellar property are c. luminosity and absolute magnitude. Both of these measurements describe the total amount of energy emitted by a star.
Luminosity is the energy emitted per unit of time, while absolute magnitude is a logarithmic scale that measures the brightness of a star as if it were 10 parsecs away from Earth. C. Luminosity and absolute magnitude are two different measures of the same stellar property. Luminosity is a measure of the total amount of energy that a star emits per unit time, usually expressed in units of watts or solar luminosities.
Absolute magnitude, on the other hand, is a measure of the intrinsic brightness of a star, defined as the apparent magnitude the star would have if it were located at a distance of 10 parsecs (32.6 light years) from Earth. Luminosity and absolute magnitude are related because they both measure the intrinsic brightness of a star. By knowing either one of these measurements, we can determine the other using mathematical relationships.
Learn more about luminosity here:
https://brainly.com/question/14140223
#SPJ11
What type of boundary is present along the eastern boundary of the North American plate?
The eastern boundary of the North American plate is marked by a divergent boundary. This boundary is where the North American plate separates from the Eurasian plate and the African plate.
As the plates move apart, magma rises from the mantle and solidifies to create new oceanic crust. This process is known as seafloor spreading and results in the formation of the Mid-Atlantic Ridge. The Mid-Atlantic Ridge is a continuous underwater mountain range that extends from the Arctic Ocean to the southern Atlantic Ocean. The divergent boundary along the eastern edge of the North American plate is responsible for the formation of this ridge. The process of seafloor spreading also causes earthquakes and volcanic eruptions along the boundary.
The eastern boundary of the North American plate is constantly shifting and changing due to the movement of the plates. Overall, the divergent boundary along the eastern edge of the North American plate plays a significant role in the geology and natural hazards of the region.
Learn more about North American here:
https://brainly.com/question/29633157
#SPJ11
What's the difference between low carrying capacity and high carrying capacity?
The difference between low carrying capacity and high carrying capacity is that Low carrying capacity means the specific habitat has small population size while High carrying capacity has large population size.
The maximum number of creatures that a given ecosystem can maintain is known as its carrying capacity. The ability of an ecosystem to renew the food, water, environment, or other essentials that populations need to survive may be one of many elements that affect an ecosystem's carrying capacity for a particular species.
The ecology may no longer be suited for the species to live if a population grows above its carrying capacity. Resources may run out entirely if the population continues to grow faster than the environment can support.
Learn more about carrying capacity:
https://brainly.com/question/30266162
#SPJ4
if star a has a magnitude of -10 and star b has a magnitude of -3, how much brighter will star a appear in the sky than star b
The difference in brightness between two stars can be calculated using their difference in magnitude, as the magnitude scale is logarithmic. The magnitude of a star is a measure of its brightness as seen from Earth.
In this case, star A has a magnitude of -10 and star B has a magnitude of -3. The difference in magnitude between the two stars is 10 - (-3) = 13. Since the magnitude scale is logarithmic, a difference of 5 magnitudes corresponds to a brightness ratio of 100:1.
Therefore, the difference in brightness between star A and star B is [tex]100^(13/5) = 17898.16:1[/tex].
This means that star A will appear 17898.16 times brighter than star B in the sky. However, it's important to note that the apparent brightness of a star can also be affected by its distance from Earth and any intervening dust or gas that may absorb or scatter its light.
To know more about magnitude scale refer to-
https://brainly.com/question/29414996
#SPJ11