A precipiatate of mass 0.013 g is formed when you mix 75.0 mL of a NaOH solution with pOH of 2.58 and 125.0 mL of a 0.0018 M MgCl2 solution
What is stoichiometry?In stoichiometry, calculations are made based on mass - mole or mole - volume relationships. First we must put down the balanced reaction equation; 2NaOH(aq) + MgCl2(aq) -----> Mg(OH)2(s) + 2NaCl(aq)
Now Ionically;
2OH^-(aq) + Mg^2+(aq) -----> Mg(OH)2(s)
Concentration of OH^- = Antilog (-2.58) = 2.6 * 10^-3 M
Number of moles of OH^- = 2.6 * 10^-3 M * 75/1000 = 0.000195 moles
Concentration of Mg^2+ = 0.0018 M
Number of moles of Mg^2+ =0.0018 M * 125/1000 = 0.000225 moles
Since;
1 mole of Mg^2+ reacts with 2 moles of OH^-
x moles of Mg^2+ reacts with 0.000195 moles of OH^-
x = 0.0000975 moles
Mg^2+ is the limiting reactant.
1 mole of Mg^2+ yields 1 mole of the precipitate
0.000225 moles of Mg^2+ yields 0.000225 moles of precipitate.
Hence, a precipitate is formed.
Learn more about precipitate: https://brainly.com/question/1770619?
what does SPDF Blocks represent on the periodic table?
Answer:
SPDF blocks represents the last electron of particular element entering into valance subshell.
example: oxygen is p block element because (1s2, 2s2 2p4) its last electron is in p block
A block of the periodic table is unified by the atomic orbitals in which valence electrons lie in.
What is the block in the periodic table?A block can be described as a set of elements in which the valence electrons lie in atomic orbitals. Each block in the periodic table is named after its characteristic orbital: s-block, p-block, d-block, and f-block.
The block names (s, p, d, and f) are derived from the value of an electron's azimuthal quantum number: sharp (0), principal (1), diffuse (2), and fundamental (3).
The s-block, where 's' stands for "sharp" and azimuthal quantum number 0, is on the left side of the periodic table. The p-block, where 'p' stands for "principal" and azimuthal quantum number 1, is on the right side of the modern periodic table and elements in groups 13 to 18.
The d-block, where 'd' stands for "diffuse" and azimuthal quantum number 2, is in the middle of the periodic table and elements from groups 3 to 12.
Learn more about the periodic table, here:
https://brainly.com/question/29367588
#SPJ2
The release of aluminium ions as a result of acid rain is less significant in areas containing limestone rock - why?
Answer:
As it flows through the soil, acidic rain water can leach aluminum from soil clay particles and then flow into streams and lakes. The more acid that is introduced to the ecosystem, the more aluminum is released. Some types of plants and animals are able to tolerate acidic waters and moderate amounts of aluminum
Explanation:
A student boils water in an electric kettle for 20 minutes. Using the same mains supply, he wants to reduce the boiling time of water. To do so, should he increase or decrease the length of the heating element? Justify your answer.
Answer:
The student needs to increase the length of the heating element
Explanation:
Increasing the length of the heating elements helps to increase the surface area of the heating elements which allows for more water to come in contact with the heating element
About how many centimeters will make an inch?
A)5
B)2+
C) 200
D)10
Answer: B) 2+
Explanation:
There are exactly 2.54 centimeters in an inch, the closest option is:
B) 2+
Answer:
2.54 centimetres
Explanation:
Ur options are wrong
How many milliliters of a 1 M nitric acid solution are required to prepare 60 mL of 0.15 M solution?
Select the correct answer below:
400 mL
O 9 mL
O 0.25 mL
none of the above
9 mL of a 1 M nitric acid solution are required to prepare 60 mL of 0.15 M solution. Therefore, the correct option is option A.
What is volume?A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, as well as several imperial or US-standard units. Volume and the notion of length are connected. A container's capacity is typically thought of as being represented by its volume.
Rather considering how much space the container takes up, think about how much fluid it could hold. Volume was initially measured using naturally occurring vessels of a comparable shape and then with standardised containers. Arithmetic formulas can be used to quickly calculate the volume of several straightforward three-dimensional shapes.
V1= m2×v2/m1 = 60 x 0.15 /1 = 9 mL
Therefore, the correct option is option A.
To know more about volume, here:
https://brainly.com/question/23477586
#SPJ2
6. How many molecules of ammonia are present in 34 g of ammonia (Formula = NH3)?
What is the pressure exerted by a force of 14.7 N over an area of 0.00482 m²?
Answer:
[tex]p= \frac{F}{A} = \frac{ 14.7 }{0.00482} = 3050 \: Pa[/tex]
20 L of nitrogen gas are collected at a temperature of 50°C and 2 atm. How many grams of nitrogen gas were collected? A.21.1 g B.29.6 C.42.3 g D.59.2
Taking into account the Ideal Gas Law, the mass of nitrogen gas collected is 21.1 grams.
Ideal Gas LawIdeal gases are a simplification of real gases that is done to study them more easily. It is considered to be formed by point particles, do not interact with each other and move randomly. It is also considered that the molecules of an ideal gas, in themselves, do not occupy any volume.
An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of gases:
P×V = n×R×T
Mass of nitrogenIn this case, you know:
P= 2 atmV= 20 Ln= ?R= 0.082 [tex]\frac{atm L}{molK}[/tex]T= 50 °C= 323 K (being 0°C= 273 K)Replacing in the ideal gas law:
2 atm ×20 L = n×0.082 [tex]\frac{atm L}{molK}[/tex] ×323 K
Solving:
n= (2 atm ×20 L) ÷(0.082 [tex]\frac{atm L}{molK}[/tex] ×323 K)
n= 1.51 moles
Being the molar mass of nitrogen 14 g/mole, that is the amount of mass that a substance contains in one mole, the mass of nitrogen gas collected is calculated as:
[tex]mass of nitrogen gas=1.51 molesx\frac{14 grams}{1 mole}[/tex]
mass of nitrogen gas= 21.1 grams
Finally, the correct answer is option A.: the mass of nitrogen gas collected is 21.1 grams.
Learn more about ideal gas law:
https://brainly.com/question/4147359
calculate the pressure in atmospheres of 1.92 moles of helium gas in a 10.0L container at 25C
The pressure in atmospheres of the given mole and volume of helium gas is 4.7atm.
Given the data in the question;
Amount of helium; [tex]n = 1.92mol[/tex]Volume of the gas; [tex]V = 10.0L[/tex]Temperature; [tex]T = 25^0C = 298.15K[/tex]Pressure in atmosphere; [tex]P = \ ?[/tex]
Ideal Gas LawThe Ideal gas law emphasizes on the behavior of a hypothetical ideal gas. It states that pressure P multiply by volume V is equal to moles times temperature and the universal gas constant.
It is expressed;
[tex]PV = nRT[/tex]
Where P is pressure, V is volume, n is the amount of substance, T is temperature and R is the ideal gas constant.( [tex]R = 0.08206Latm/molK[/tex] ).
To determine the pressure in atmosphere, we substitute our values into the expression above.
[tex]PV = nRT\\\\P = \frac{nRT}{V} \\\\P = \frac{1.92mol\ *\ 0.08206Latm/molK\ *\ 298.15K}{10.0L} \\\\P = \frac{46.975Latm}{10.0L}\\\\P = 4.7atm[/tex]
Therefore, the pressure in atmospheres of the given mole and volume of helium gas is 4.7atm.
Learn more about Ideal Gas Law: brainly.com/question/4147359
find the molarity of 131 g Ba(NO3)2 dissolved in 750.0 water
Answer:
6.68 x 10^-4
Explanation:
131g ÷ 261.337g/mol = 0.5012685 moles
0.5012685 moles ÷ 750.0 liters =
0.5012685÷ 750.0=0.000668358
6.68 x 10^-4
What is the product of radioactive decay 0/-1 e called?
A. An alpha particle
B. A beta particle
C. Nuclear fission
D. A gamma wave
Answer:
it represents a beta particle so the answer is B a beta particle
Answer:
The product of radioactive decay ⁰-₁e called a beta particle
B. A beta particle
If 4.80 mol Ca mixed with 2 mol N2, which is the limiting reactant? 3Ca (s) + N2 (g) Ca3N2 (s)
Balance the equation for a half-reaction that occurs in acidic solution. Use e− as the symbol for an electron.
MnO_{4}^{-} -> MnO_{2}
The balanced half reaction equation is MnO4^- + 4H^+ ------>MnO2 + 2H2O + 3e
What is a redox reaction?The term redox reaction has to do with a reaction in which there is a loss or gain of electrons. In this reaction, one specie accepts electrons while another specie looses electrons.
The balanced half reaction equation in acid is; MnO4^- + 4H^+ ------>MnO2 + 2H2O + 3e
Learn more about redox reaction: https://brainly.com/question/12980705
When liquids of a ph 5 and ph 2 mixed together, gives what ph value
Answer:
By mixing two solutions of differing pH values, the final pH of the mixed solution is going to be a function of the pH-, or the hydrogen ion (H+), of the lower pH solution, and the final volume. The hydrogen ion(H+) of the higher pH solution has little to no effect in the final pH value.
Which of the following is most likely to lose electrons in an ionic compound?
a. lead (Pb)
b. carbon (C)
C. oxygen (O)
d. hydrogen (H)
Answer:
a. Lead (Pb)
Am 100% sure
Hope it helps
please mark me as brainliest
What mass, in grams, of sodium sulfate is needed to make 234.9 g of a 1.7 % (m/m) aqueous solution of sodium sulfate?
Answer:
I think its this 4.125 g Na2SO4 or this 4.125 g
dk how to do this :)
Answer:
2Mg, 2 02, MgO
Which action would shift this reaction away from solid silver chloride and toward the dissolved ions
3. Arrange the following according to increasing acid strength
(i) Ka= 2.5 + 10-15
(ii) Ka= 9.0 + 10-9
(iii) pKa= 7.5
(iv) % dissociation =100
(a) iv, iii, ii, i
(b) ii, I, iii, iv
(c) i, iii, iv, ii
(d) i, ii, iii, iv
(e) iii, iv, ii, i
Answer:
3. Arrange the following according to increasing acid strength (i) Ka=2.5x 10-10 (ii) Ka=9.0x108 (iii)pKa= 7.5 (iv)% dissociation -100 (a) iv, iii, ii, i (b) ii, 1, iii, iv (c) i, iii, iv, ii (d)i, ii, iii, iv (e) iii, iv, ii, i
5. Consider the buffer NH/NH.Cl. If one wants to prepare 250.0mL of this buffer at pH 4.0. Is it possible to achieve one's sim? (a) yes (b) no 6. If the pH of the buffer in (5) above would be 9.0, the ratio of NH/NH.Cl required for the preparation, considering I Liter of buffer, is (a) 1.80 (b) 0.56 (c) 4.26 (d) 1.82 x 10: (e) K, (NH -1.8x109)
Explanation:
Hydrogen has a melting point of -259 °C, and a boiling point of -253 °C. Its density at liquid state is 0.07 g/cm³. What is the physical state of Hydrogen at -250 °C? Explain your answer.
Answer:
Explanation:
Remark
-250, if you can believe it, is actually warmer than - 253. At -250 the hydrogen has gone through a phase change (a phase change means that it has gone from a liquid to a gas).
From here on as far as you are concerned, the hydrogen will stay as a gas. Later on, if all other things remain constant, you will learn that hydrogen can do some very strange things.
Hello, do these calculations using table 1 look correct? Thank you
Table 1.
Sugar (Sucrose) Data
Mass of unchewed gum 3.7 (g)
Mass of chewed gum 2.0 (g)
Mass of sugar 1.7 (g)
Percent sugar
46%
Post-Lab Questions
1. What is the percent sugar? Show your calculations.
mass of sugar (1.7) ÷ mass of unchewed gum ( 3.7) × 100 = 45.94 (46%)
2. What is the molar mass of sugar (sucrose, C12H22O11)? Show your calculations.
C=12×12=144
H=1×22=22
O=16×11=176
To get the molar mass of the entire compound you, 144 + 22 + 176 = 342 g/mol
3. Convert the mass of dissolved sugar to moles. Show your calculations.
1.7 g ÷ 342 g/mol = 0.00497 moles
4. Convert the moles of sugar to molecules of sugar. Show your calculations.
0.00497 mole × 6.022 × 10^23 = 2.992934 × 10^21 molecules
5. Imagine that you used four pieces of gum instead of two. Calculate the number of moles. Show your calculations.
In theory, assuming the sticks of gum were exactly the same mass and sugar content, the moles would double.
2 ÷ 342 g/mol × 1.7 = 0.00994 moles
6. How does the mass of the saliva alter the experimental data?
It is impossible to blot off all the saliva with a paper towel because the gum sticks to the paper, so it adds more mass to the chewed gum and therefore alters the amount and percent of sugar calculations.
Answer:
yes it does look correct. good job.
Post- lab the percent sugar 46%, and the molar mass of sugar is 342 g/mol, the mass of dissolved sugar to moles is 0.00497 moles of sugar to molecules of sugar is 2.992934 × 10^21 molecules, assuming the sticks of gum were exactly the same mass and sugar content, the moles would double 0.00994 moles.
What are moles?moles is the unit of the molecule and it is defined as the number of molecules participating in a chemical reaction and value of one mole is equal to Avogadro constant that is 2.303 × 10²³
Sugar percentage = mass of sugar / mass of gum × 100 = 1.7 / 3.7 × 100 = 45.94 (46%)
Molar mass of sugar = C12H22O11 = C=12×12=144 + H=1×22=22 + O=16×11=176 = 342 g/mol
Mass of dissolved sugar to moles = 1.7 g ÷ 342 g/mol = 0.00497 moles
The moles of sugar to molecules of sugar = 0.00497 mole × 6.022 × 10^23 = 2.992934 × 10^21 moleculesIn the given theory using four pieces of gum will exactly be the same to the mass of sugar.2 ÷ 342 g/mol × 1.7 = 0.00994 moles
The mass of the saliva alter the experimental data because it is not possible to remove all the saliva from the surface as it gets stick to the paper which changes the amount of sugar.
Therefore, the percent sugar 46%, and the molar mass of sugar is 342 g/mol, the mass of dissolved sugar to moles is 0.00497 moles of sugar to molecules of sugar is 2.992934 × 10^21 molecules, assuming the sticks of gum were exactly the same mass and sugar content, the moles would double 0.00994 moles.
Learn more about moles , here:
https://brainly.com/question/13611430
#SPJ2
Giving Brainliest
Which choice is an example of the use of sound energy in everyday life?
batteries powering toys
fireplaces keeping people warm
lights helping people see
car horns preventing accidents
Answer:
car horn preventing accidents
Answer:
d) car horns preventing accidents
Explanation:
the use of car horns represents sound energy in everyday life. batteries use chemical energy that is turned into electrical energy, fireplaces use thermal energy, and lights use electrical energy!
describe the arrangement of the 118 elements in the periodic table how is it arrange?
What would be the immediate product of neutron absorption by Ag 107
The immediate product of neutron absorption by Ag-107 is silver atom with a mass of 108, Ag-108.
What is radioactivity?Radioactivity is the spontaneous emission of radiation as wall as particles and energy l by the nucleus of elements due to their disintegration.
The radioactive particles that are usually emitted include:
alpha particles beta particles andneutronsThe neutron has a mass of 1.
When silver isotope having a mass of 107 absorbs a neutron, the silver isotope produces will have a mass of 108, Ag-108.
Learn more about radioactivity at: https://brainly.com/question/25750315
What does an electrostatic force do?
A. An electrostatic force attracts oppositely charged particles.
B. An electrostatic force holds particles together by sharing
electrons.
C. An electrostatic force holds particles of the same charge together.
D. An electrostatic force attracts particles via gravitational pull.
Answer:
A.
Explanation:
Opposite charged particles attract.
Particles of same charge are repelled.
Answer:
attracts opposites (a)
Explanation:
An alkyne with the molecular formula C6H10 was reduced with H2 and Lindlar's catalyst. Ozonolysis of the resulting alkene afforded formaldehyde and an unbranched aldehyde. What is the IUPAC name of the alkyne that was reduced?
Given that the alkyne has a formula as C₆H₁₀, the IUPAC name of the alkyne is hexyne
What is an alkyne?Alkynes are unsaturated hydcarbons with the general formula of CₙH₂ₙ₋₂. They contains triple bonds (C≡C) in the carbon chains. The simplest member of this family is ethyne (C₂H₂)
The first nine members of the Alkynes sre:
Ethyne, C₂H₂Propyne, C₃H₄ Butyne, C₄H₆ Pentyne, C₅H₈Hexyne, C₆H₁₀Heptyne, C₇H₁₂Octyne, C₈H₁₄Nonyne, C₉H₁₆Decyne, C₁₀H₁₈Considering the question given above, the formula of the alkyne is C₆H₁₀.
Therefore, the name of the alkyne is hexyne
Learn more about IUPAC nomenclature:
https://brainly.com/question/16180944
How moles of Cl' are in a 45 mL of 1,4 M solution of NaCl?
Answer:
.063 moles Cl-
Explanation:
To find moles multiply molarity by volume.
1.4*.045=.063 moles Cl-
A solution was found to have a 15.6 % transmittance at 500 nm, its wavelength of maximum absorption, using a cell with a path length of 5.00 cm. Calculate the absorbance of the solution in a 1.00 cm cell at 500 nm. A. 0.161 B. 69.0 C. 0.0312 D. 4.04
For the absorbance of the solution in a 1.00 cm cell at 500 nm is mathematically given as
A’ = 0.16138
What is the absorbance of the solution in a 1.00 cm cell at 500 nm?Absorbance (A) 2 – log (%T) = 2 – log (15.6) = 0.8069
Generally, the equation for the Beer’s law is mathematically given as
A = ε*c*l
0.8069 = ε*c*(5.00 )
ε*c = 0.16138 cm-1
then for when ε*c is constant
l’ = 1.00
A’ = (0.16138 cm-1)*(1.00 cm)
A’ = 0.16138
In conclusion, the absorbance of the solution in a 1.00 cm cell at 500 nm is
A’ = 0.16138
Read more about Wavelength
https://brainly.com/question/3004869
an organisms particular role in its habitat,or when and how it survives, is called its
Answer:
Niche.
A niche is a place where an organism lives at a given time or how the organism lives there.
Based upon the chemical equation in #2 above, if 45.7g C2H4O2 are used in the reaction, how many grams of H2O will result
calcium chloride and carbon dioxide