The products of the first and second alkylation event are still very active alkylation agents.
What is meant by Amine alkylation?An organic reaction between an alkyl halide and an amine or ammonia is known as amine alkylation (amino-dehalogenation). A higher substituted amine is the reaction's end product, and the reaction is known as nucleophilic aliphatic substitution (of the halide).A tertiary alkyl cation is added to an olefin in a conventional paraffin (alkane)-olefin (alkene) alkylation, which is an acid-catalyzed process. It is produced from an isoalkane (through hydride abstraction). The isobutane-ethylene alkylation reaction, which results in 2,3-dimethylbutane, is an illustration of such a reaction.The term "Friedel-Crafts Alkylation" describes the substitution of an alkyl group for an aromatic proton. This is accomplished by using a carbocation to conduct an electrophilic assault on the aromatic ring. Alkyl halides are used as reactants in the Friedel-Crafts alkylation process, which produces alkylbenzenes.The primary amine produced can also interact with the alkyl halide to produce a disubstituted amine, which can then interact with another substance to produce a trisubstituted amine. Alkylation of ammonia results in a variety of compounds as a result.Why is it so difficult to control the alkylation of primary amines in an sn2-type reaction manifold?
The products of the first and second alkylation event are still very active alkylation agents.
Primary and secondary formed amines by alkylation have more nucleophilic N (+I of alkyl group) which can further react with alkyl halide to give alkylation. Thus the reaction gives tertiary and quaternary amines.
Explanation:
The alkylation of ammonia during the manufacture of amine prevents the synthesis of secondary and tertiary amine. The Carbyl Amine Test is used to test it.
Because they react with alcoholic KOH, secondary and tertiary amine production fails to pass the carbylamine test.
The carbbylamine test is a test for identifying primary amines.
In this heating, an amine is present while the substance is being heated with chloroform in a basic solution.
It can be detected by the isocyanide's distinctively bad odor.
A positive carbylamine test will be produced by primary amines such isopropyl amine.
To learn more about Amine alkylation, refer to:
https://brainly.com/question/9631835
#SPJ4
What is the major elimination product obtained from the reaction of each of the following alkyl halides with hydroxide ion?
The major elimination product is 2-methylbut-2-ene and the structure can be seen as followed in the diagram attached.
The outcome of an elimination reaction is what?An elimination reaction’s main byproduct is often the more substituted alkene. This is due to the lower energy and faster progressing transition state that leads to the more substituted alkene.
What is the location of the elimination product?It is critical to first identify the electrophilic carbon in the substrate in order to determine the potential products. Next, list every hydrogen on every carbon that is next to the electrophilic carbon. Every distinct neighboring hydrogen has the potential to create a distinct elimination product.
What is an example of an elimination reaction?The kind of atoms or groups of atoms that are expelled from the molecule is a frequent way to identify elimination reactions. The elimination of a halogen and an atom of hydrogen
To know more about elimination reaction, visit:
https://brainly.com/question/8739887
#SPJ4
What is the buffer range for the na2hpo4/na3po4 buffer if its ph = 11.9? ( (ka1= 7.5 x 10-3, ka2= 6.2 x 10-8, ka3= 4.8 x 10-13)a.11.3 to 13.3b.10.9 to 12.9c.9.9 to 11.9d.6.2 to 8.2
Buffer range of Na₂HPO₄/Na₃PO₄ is 10.9 to 12.9
Since NaH₂PO₄ and Na₂HPO₄ are acid salts, they have the ability to function as both acids and salts. They will create a buffer when one acts as an acid and the other as a salt.A buffer is a substance that can withstand a pH change when acidic or basic substances are added. Small additions of acid or base can be neutralised by it, keeping the pH of the solution largely constant.The Henderson-Hasselbalch equation establishes a connection between an acid's pKa and pH. When the concentration of the acid and its conjugate base, or the base and the corresponding conjugate acid, are known, the pH of a buffer solution can be determined with the use of this equation.using Henderson hasselbach equation:
pH = pKa + log₁₀ ([A⁻]/ [HA])
By this equation we can find out the buffer range
Given,
pH of given buffer is 11.9
Ka₁= 7.5 x 10⁻³
Ka₂= 6.2x 10⁻⁸
Ka₃= 4.8 x 10⁻¹³
so by Henderson hasselbach equation buffer range is 10.9 to 12.9
Therefore, correct option is (b)
Learn more about buffer here:
https://brainly.com/question/8676275
#SPJ4
what is the purpose of the aqueous sodium bisulfite solution that is added during the workup of the bromination reaction?
The purposes of the aqueous sodium bisulfite solution that is added during the workup of the bromination reaction remove moisture from organic layers To scavenge excess bromine in the reaction mixture To remove byproducts None of the above. The reaction between ethyl chloride and magnesium followed by addition to benzaldehyde belongs to the Grignard reaction category.
What is an aqueous sodium bisulfite solution?
This salt of bisulfite is often prepared by bubbling sulfur dioxide in a solution of sodium carbonate in water. Sodium bisulfite in touch with chlorine bleach (aqueous solution of sodium hypochlorite) will generate heat and form sodium bisulfate and sodium chloride.
To know more about sodium bisulfite go to the given link:
https://brainly.com/question/21303846
The lab experiment introduces you to the chemistry of elemental copper. Copper will undergo several chemical transformations, represented by the chemical formulas given. What is the correct sequence of chemical transformations with the correct phases? begin with 1 and and with 6.
The proper order of chemical reactions of copper in the right phases is
1. Cu(s) 2. Cu(NO3)2 (aq) 3. Cu(OH)2 (s) 4. CuO (s) 5. CuSO4 (aq) 6. Cu(s)
What are the properties of copper?
One of the first metals that people used was copper. The primary causes of this are the fact that it is a native metal, meaning it can be found naturally in a usable state, and that it possesses advantageous metallurgical qualities. Malachite, cuprite, azurite, bornite, and chalcopyrite are other minerals that naturally include it.
Copper is softer than zinc and has a bright finish when polished. Along with silver and gold, it can be found in group Ib of the periodic table. Chemical reactivity is minimal for copper.
To learn more about copper click the given link
https://brainly.com/question/11979921
#SPJ4
Silicon has an atomic number of 14 and a mass number of 28. how many neutrons are found in silicon?
Silicon is a chemical element with the symbol Si and atomic number 14. It is a hard, brittle crystalline solid with a blue-grey metallic luster.
How many neutrons are found in silicon?
The mass number is defined as the sum of total numbers of protons and also the numbers of neutrons which is present in the nucleus of an atom is called the mass number. So as we know that the number of proton present in silicon is 14, so by subtracting the number of neutrons from the mass number of silicon, we get 14 which shows the numbers of neutrons in the nucleus of the silicon. Silicon is an element which is denoted or represented with the symbol Si and atomic number 14. It hard in structure, with a blue-grey metallic luster.
Silicon has 14 protons and 14 neutrons. Its atomic number is 14 and its atomic mass is 28.
So we can conclude that there are 14 number of neutrons present in the nucleus of the silicon atom.
Learn more about Silicon here: https://brainly.com/question/953530
#SPJ1
you have a container filled with 31 moles of neutral lithium. how much negative electric charge is contained in the electrons of all the lithium atoms in the container?
The electrons of every lithium atoms in the container have a combined negative electric charge of 8.96 × 10⁶ C
What is Electric Charges?Given the physical characteristic of electric charge, charged matter encounters a force whenever exposed to an electromagnetic field.It's normal for electrical charges to be positive or negative (commonly carried by protons and electrons respectively). Two charges that are in tension with each other repel another.When something is described as "neutral," it has no net charge. Classical electrodynamics refers to the earlier theory of how charged particles interact, and it is still valid for problems that do not necessitate accounting for quantum events .The net charge of an isolated system, which is the total of the positive and negative charges, cannot change since electric charge is a conserved property.We have 3 moles of electrons (e⁻) in 1 mol of Li, so the quantity of negative electric charge is:
hence
negative electric charges = 3 × 31 × 6.022 × 10²³ × 1.60 × 10⁻¹⁹
negative electric charges = 8.96 × 10⁶ C
To know more about electric charges visit:
brainly.com/question/9194793
#SPJ4
A sample of pentanol, c5h12o, contains 0.185 mol of the compound. what is the mass of the sample, in grams?
The mass of the sample is 18.3g
What is mass?The total amount of matter in a physical body is known as mass. This property also measures inertia, or the body's resistance to acceleration (change of velocity) when a net force is applied. The mass of an object also affects the gravitational attraction it exerts on other bodies.
The kilogram is the fundamental mass unit of SI (kg). Although mass is frequently established by measuring an object's weight on a spring scale rather than a balancing scale and directly comparing it with known masses, mass and weight are not the same things in physics. Although there is less gravity on the moon than there is on Earth, an object would nonetheless have the same mass.
To learn more about mass from the given link:
brainly.com/question/19694949
#SPJ4
what name is given to this molecule? a positively charged molecule. this molecule consists of three hydrogen atoms bonded to an oxygen atom. what name is given to this molecule? a positively charged molecule. this molecule consists of three hydrogen atoms bonded to an oxygen atom. methane hydronium ion water glucose hydroxide ion
Hydronium ion are positively charged molecule
Here as per given data hydronium ion are positively charged molecule consists of three hydrogen atoms bonded to an oxygen atom, this molecule is written as H3O⁺ that's why it is called hydronium ion. this means that in the bond between hydrogen and oxygen and oxygen pull harder on the shared electrons thus causing a partial negative charge on the molecule and causing it to be attracted to the positive charge of H⁺ to form hydronium.
Know more about molecule
https://brainly.com/question/28535859
#SPJ4
Calculate the molality of a 0.677 m ethanol ( c 2 h 5 o h ) solution whose density is 0.588 g/ml
The molality of a 0.677 m ethanol ( c 2 h 5 o h ) solution whose density is 0.588 g/ml.
What is molality and molarity?
The number of solvent moles per kilogram is known as molality. Because the mass of the solute and solvent in the solution remains constant, molality is the preferred concentration transfer method.
Molarity, also referred to as molar concentration, is the quantity of a material expressed as moles per litre of solution. Solutions marked with a molar concentration have a capital M. One mole of solvent per litre is present in a 1.0 M solution.
Molar mass (w) of C2H5OH = 46g
Molarity(M) = 0.677M
Density(D) = 0.588g/mol
Molality(m) = M/D * (1000 + w*M)
= 1187.2m
To learn more about molality and molarity from the given link below,
https://brainly.com/question/14770448
#SPJ4
What is the approximate dihedral angle between the two chlorine atoms in the diequatorial conformation of trans-1,2-dichlorocyclohexane?
180° angle between the two chlorine atoms in the diequatorial conformation of trans-1,2-dichlorocyclohexane.
conformatio Results from bond rotation, they may be interconverted by bond rotation but interconversion does NOT require the breaking of bonds, Virtually every molecule, except the simplest and most rigid, has many possible conformationsIn it the bond rotates and interactions between atoms and their electron clouds create torsional strain and steric strain in the molecule and the preferred conformations are those of lower energy where strain is minimized.the less stearic hindrance the most stable configuration, the big molecules create the most stearic hindrance dipole moment also defines the stability of conformational structure.To know more about diequatorial conformation visit : https://brainly.com/question/14703697
#SPJ4
If the frequency of a red spectrum line is at 1.60 x 1014 hz, how much energy does each photon of this light have?
Each photon of this light has 1.06x10^-19 energy.
A tiny electromagnetic radiation energy bundle is known as a photon or light quantum. The idea was first put forth by Albert Einstein in his explanation of the photoelectric effect in 1905, in which he suggested that discrete energy packets might be present during the transmission of light. Heat radiation is released and absorbed in separate units, or quanta, as explained earlier by the German physicist Max Planck in the year 1900.
While all photons move at the same speed, their energies range from high-energy gamma rays and X-rays to low-energy infrared and radio waves. A concentration of photons that have been manufactured to travel collectively in order to simultaneously strike their target is what gives lasers their incredible power.
To learn more about photons please visit-
https://brainly.com/question/20912241
#SPJ4
Which phrase describes a chemical change?
O an exploding firecracker
O a freezing ice cube
O wood breaking into splinters
O a wire conducting electricity
Drag each tile to the correct location.
What types of mixtures are these?
Homogenous mixture - a cup of tea and sugar, food coloring dissolved in water.
Heterogenous mixture - a bucket full of sand and gravel, peanut and almond mixed together in a bowl.
What are mixtures?Mixtures are substances that are made up of 2 or more substances mixed together.
Mixtures can be homogenous if the component substances are uniformly distributed. If the components are skewed to a particular side or are not uniformly distributed, such a mixture is said to be heterogeneous.
A homogenous mixture is attained when a solute completely dissolves in a solvent. If the solute is partially or totally insoluble, a heterogeneous mixture results.
In the same vein, a solid-solid mixture cannot be homogenous.
Thus:
Homogenous mixture - a cup of tea and sugar, food coloring dissolved in water.Heterogenous mixture - a bucket full of sand and gravel, peanut and almond mixed together in a bowl.More on mixtures can be found here: https://brainly.com/question/24898889
#SPJ1
What does volume measure? name two different units that might be used to measure volume.
Answer:
mL,L,cm^3
Explanation:
Write the formulas of the following compounds:
a. acetic acid
b. silver carbonate
c. copper(ii) sulfate
d. dinitrogen monoxide
e. xenon trisulfide
a. acetic acid = CH3COOH
b. silver carbonate = Ag2CO3
c. copper(ii) sulfate = CuSO4
d. dinitrogen monoxide = N2O
e. xenon trisulfide = XeS3
What is chemical formula?
An element's chemical symbol and the proportionate number of atoms it contains are used to identify each constituent element in a chemical formula. These proportions are determined by empirical formulae that begin with a key element and then assign atom counts to the other parts of the compound in relation to the key ingredient.
A chemical formula is a representation of a compound's constituent elements and their relative proportions.
To learn more about chemical formula click the given link
https://brainly.com/question/16950183
#SPJ4
Trinitroglycerin, C3H5N3O9 (usually referred to simply as nitroglycerin), has been widely used as an explosive. Alfred Nobel used
it to make dynamite in 1866. Rather surprisingly, it also is used as a medication, to relieve angina (chest pains resulting from
partially blocked arteries to the heart) by dilating the blood vessels. At 1 atm pressure and 25 °C, the enthalpy of decomposition
of trinitroglycerin to form nitrogen gas, carbon dioxide gas, liquid water, and oxygen gas is -1541.4 kJ/mol.
(a) Write a balanced chemical equation for the decomposition of trinitroglycerin.
(b) Calculate the standard heat of formation of trinitroglycerin.
(c) A standard dose of trinitroglycerin for relief of angina is 0.60 mg. If the sample is eventually oxidized in the body (not explosively,
though!) to nitrogen gas, carbon dioxide gas, and liquid water, what number of calories is released?
(d) One common form of trinitroglycerin melts at about 3 °C. From this information and the formula for the substance, would you
expect it to be a molecular or ionic compound? Explain.
(e) Describe the various conversions of forms of energy when trinitroglycerin is used as an explosive to break rockfaces in highway
construction.
The compound Trinitroglycerin is a molecular compound
What is Trinitroglycerin?The compound Trinitroglycerin is basically used as an explosive. It could decompose following the equation;
a) [tex]4C_{3} H_{5} N_{3} O_{9} (l)--- > 12CO_{2} (g) + 10H_{2} O(g) + 6N_{2} (g) + O_{2} (g)[/tex]
b) We can see that the decomposition of the compound Trinitroglycerin produces -1541.4 kJ/mol of energy hence 1541.4 kJ/mol is the enthalpy of formation of the compound.
c) Number of moles in 0.6 mg of the compound = 0.6 * 10^-3 g/227 g/mol
= 2.6 * 10^-6 moles
If 4 mole of the compound produces 1541.4 kJ of heat
2.6 * 10^-6 moles of the compound produces 2.6 * 10^-6 moles * 1541.4 kJ/4 mole
= 1 * 10^-3 kJ or 1 J
If 1 Cal = 4.184 J
x = 1 J
x = 0.24 cal
d) The compound is a molecular compound
e) When trinitroglycerin is used as an explosive to break rockfaces in highway construction, chemical energy is converted to heat, light, sound and mechanical energy.
Learn more about trinitroglycerin:https://brainly.com/question/16879324
#SPJ1
rank the following in order to show the precipitation of halite from water. place the first event at the top and last event at the bottom.
The order to show the precipitation of halite from water are given below.
What is precipitation ?
Precipitation is the process of changing a dissolved substance from a super-saturated solution to an insoluble solid in an aqueous solution. Precipitate refers to the produced solid. The chemical agent that initiates the precipitation in an inorganic chemical process is referred to as the precipitant.
Step 1: Seawater starts to evaporate.
Step 2: Na cations and Cl anions concentrate as water molecules leave the liquid state and are left behind.
Step 3: Cl anions and Na cations move toward one another and start to bind.
Step 4: The resulting NaCl pairs join and start to form a crystal of halite, an ordered structure.
To learn more about Precipitation reaction click on the link below:
https://brainly.com/question/17074350
#SPJ4
Question:
Rank the following in order to show the precipitation of halite from water. Place the first event at the top and the last event at the bottom.
What are two ways engineers use their understanding of ke and pe to make their designs safer
The energy formed in a system by the motion of particles is called kinetic energy. which is half of the product of the mass and volume
k.E = mv^2/2
When someone is riding on an amusement ride also known as a roller coaster, due to the nature of the turns and slope, energy will change from potential to kinetic energy and it will be repeated a couple of times throughout the course of the ride.
The energy stored in the system when it's at a rest is called potential energy, the energy is converted into kinetic energy. when it starts moving. The potential energy is stated as the product of the mass, height, and acceleration due to gravity.
Normally, the amusement ride vehicles will be pulled up from the first hill by a chain and as the other vehicles follow that route in climbing, and they will then gain potential energy
To know more about kinetic energy visit : https://brainly.com/question/12669551
#SPJ4
how do I write both conversion factors for converting L to ML
The capacity of a liquid is measured in metric units of volume called litres and millilitres.
There are four units of measurement for liquid volume: millilitres, centilitres, litres, and kiloliters.Liter is a fundamental metric unit that measures liquid volume and is equal to one cubic decimeter.The millilitre is a more compact metric unit that measures a liquid's volume or capacity. It is equivalent to one thousandth of a litre and is used to measure smaller amounts of liquid.By dividing the given amount by 1000, we may convert the given amount to millilitres. Let's, for illustration, convert 6 litres to millilitres. So, 6 × 1000 Equals 6000 ml. 6 litres hence equal 6000 millilitres.It should be remembered that we must divide the supplied amount by 1000 in order to convert from millilitres to litres. Let's convert 7000 millilitres to litres as an example. 7000 x 1000 equals 7 litres. So, 7000 millilitres equals 7 litres.A crucial component of measurement is unit conversion, which is done using the appropriate quantity conversion factor.
Learn more about unit measurement here:
https://brainly.com/question/141163
#SPJ9
Precipitate-forming reactions would be most appropriate for identifying the presence of?
Precipitate-forming reactions would be most appropriate for identifying the presence of whether an element is present in the solution.
What is precipitate forming reaction?In a precipitation reaction, dissolved chemicals will get combined to form one or more solid products. These kinds of reactions, which are also known as double displacement, double replacement, or metathesis reactions which are frequently taken place through the aqueous solutions and involved in the exchange of ions between ionic compounds.
Through the precipitation reactions, the presence of element will be confirmed and analyzed. The presence of lead in water sources could be checked by adding the chemical and looking for the appearance of a precipitation whether it should be at instant , and the chemical combines with lead to generate a precipitate.
To learn more about precipitate forming reaction,
brainly.com/question/9052471
#SPJ4
select all of the following that apply to lipids. multiple select question. consist mostly of polar chemical groups contain mostly carbon and hydrogen do not dissolve in water high oxygen content
Select all of the following that apply to lipids. contain mostly carbon and hydrogen ,do not dissolve in water
What is lipids in simple terms?A lipid is any of varied organic compounds that are insoluble in water. They include fats, waxes, oils, hormones, and certain components of membranes and performance as energy-storage molecules and chemical messengers.
What is lipids in human body?Lipids are fatty, wax like molecules found within the human body and other organisms. They serve several different roles within the body, including fuelling it, storing energy for the longer term , sending signals through the body and being a constituent of cell membranes, which hold cells together.
Learn more about Lipid:
brainly.com/question/722983
#SPJ4
What is the ph of a 205 ml sample of 2.668 m benzoic acid (c6h5cooh) (ka = 6.4 x 10-5)?
The pH of a 205 ml sample is 1.58.
Balanced chemical eqation for benzoic acid release proton in water:
C₆H₅COOH(aq) ⇄ C₆H₅COO⁻(aq) + H⁺(aq)
V(C₆H₅COOH) = 205 mL; volume of benzoic acid
c(C₆H₅COOH) = 2.668 M; concentration of benzoic acid
Ka = 6.4 x 10-5; acid constant of benzoic acid
c(C₆H₅COO⁻) = c(H⁺) = x; unknown concentration
Ka = (c(C₆H₅COO⁻) x c(H⁺)) / c(C₆H₅COOH)
6.4 x 10-5 = x² / 2.668 M - x
x² + (6.4 x 10-5)x - 1.7 x 10⁻⁴ = 0
Solve for x, using quadratic formula:
x = c(H⁺) = 0.026 M
pH = -logc(H⁺)
pH = -log0.026
pH = 1.58
More about acid: brainly.com/question/17825334
#SPJ4
the reaction of 1-bromobutane with sodium hydroxide affords the substitution product 1-butanol. what would happen to the rate of the reaction if the concentration of both 1-bromobutane and sodium hydroxide were doubled?
The rate increases by a factor of 4. IF the rate of the reaction concentration of both 1-bromo butane and sodium hydroxide were doubled
What is meant by rate of reaction?
The rate of reaction refers to the speed at which the products are formed from the reactants in a chemical reaction.The reaction rate or rate of reaction is that the speed at which a chemical reaction takes place, defined as proportional to the rise in the concentration of a product per unit time and to the decrease in the concentration of a reactant per unit time. Reaction rates can vary dramatically
Why is rate of reaction important?
The rate of a reaction is a powerful diagnostic tool. By checking out how fast products are made and what causes reactions to slow down we can develop methods to improve production. This information is important for the large scale manufacture of many chemicals including fertilizers, drugs and household cleaning items.
Learn more about rate of reaction :
brainly.com/question/25724512
#SPJ4
Which statement describes the particles that make up the rigid structure of a
three-dimensional crystalline solid?
A. They move around freely to various locations in a random pattern.
B. They move more quickly than the particles in the liquid of the
substance.
C. They move more quickly than the particles in the gas of the
substance.
D. They move by vibrating in their locations within a fixed pattern.
SUBMIT
The statement that describes the particles that make up the rigid structure of a three-dimensional crystalline solid is:
They move by vibrating in their locations within a fixed pattern; option DWhat are the nature of the particles in a solid?Solids are one of the three states in which matter exists.
Solids are characterized by their having definite shapes and volumes.
Solids have definite shapes and volumes because of the arrangement of the particles in a solid.
The intermolecular forces of the particles in a solid are very strong such that the particles are not free to move but vibrate about a fixed position.
Thus, they are arranged in rigid continuous patterns as seen in solid crystals.
In conclusion, the particles in a crystalline solid are arranged in regular repeating patterns forming a three-dimensional structure.
Learn more about crystalline solids at: https://brainly.com/question/1395058
#SPJ1
A neutral atom has a mass number of 80 and has 45 neutrons. write its atomic symbol.
A neutral atom has a mass number of 80 and has 45 neutrons.
What is mass no.?
mass number The total of the protons and neutrons is how it is described. The atomic mass of a specific atom is nearly equivalent to the mass number.
For the given problem, we have mass no = 80
Now, we know that, mass no. = no. of (neutrons + protons)
Hence here, no of protons = 80-45 = 35,which is again equal to the no of electrons, which corresponds to the atomic no. of a specific element. Here atomic no 35 corresponds to Bromine atom and its symbol is Br.
To learn more about mass no. from the given link below,
https://brainly.com/question/13354129
#SPJ4
The compound mnco3 is an ionic compound. what are the ions of which it is composed?
Manganese(II) ions are arranged in MnCO3 in an octahedral coordination geometry, giving it a structure similar to that of calcite.
What is octahedral coordination?The shape of compounds with six atoms or groups of atoms or ligands symmetrically grouped around a central atom, defining the vertices of an octahedron, is described by octahedral molecular geometry, also known as square bipyramidal, in chemistry. The prefix octa refers to the octahedron, which has eight faces. Although octahedral compounds typically have an atom in their center and no links between the ligand atoms, the octahedron is one of the Platonic solids.
To the point group Oh belongs a perfect octahedron. Molybdenum hexacarbonyl Mo(CO)6 and sulfur hexafluoride SF6 are two examples of octahedral chemicals.
To learn more about octahedral coordination from the given link:
brainly.com/question/14313840
#SPJ4
Genetic testing cannot be used to determine _____.
1.life-threatening accidents
2.potential for developing genetic diseases
3.DNA identity of a criminal
4.the identity of a genetic disease presenting symptoms
Answer:
4.the identity of a genetic disease presenting symptoms
Explanation:
Which actions are part of the scientific process? Select all that apply.
A] Experiments
B] hypotheses
C] Observations
D] Conclution
Please help i give brainly!!!!!
The actions that are part of the scientific process are as follows:
ExperimentsHypothesesObservationsConclusionWhat is the scientific method?The scientific method is a method of discovering knowledge about the natural world based in making falsifiable predictions called hypotheses, testing them empirically, and developing theories that match known data from repeatable physical experimentation.
The scientific method is made up of the following processes:
Making an observation or asking questionsConstructing an hypothesisTesting the hypothesis via experimentationAnalyzing the dataMaking a conclusionTherefore, the actions that are part of the scientific process are as follows:
ExperimentsHypothesesObservationsConclusionLearn more about scientific method at: https://brainly.com/question/16172865
#SPJ1
what includes the carbon dioxide and carbon monoxide in the atmosphere, produced by business processes and systems? multiple choice ewaste energy consumption sustainable mis carbon emissions
The emission of carbon dioxide and carbon monoxide constitute carbon emissions.
What are carbon emissions?
The term carbon emissions has to do with the ways in which carbon could be introduced into the environment. We know that carbon is a very important component of pollution as it is contained in fossil fuels which are often burnt to release energy to drive civilization.
Hence the term carbon emissions include the carbon dioxide and carbon monoxide in the atmosphere, produced by business processes and systems.
Learn more about carbon emissions:https://brainly.com/question/28245782
#SPJ4
First Steps
THE LANDING
As the lander hit, Maria drew a jagged breath, and her chest muscles clenched tight with anxiety. Captain Curran, the group leader, turned around and smiled at Maria and her five friends.
“All right,” he said with forced joviality. “Who wants to be the first of the generations born in space to set foot on a real planet?”
Maria waited for someone else to speak or raise their hand. Next to her, Allen just stared at the floor of the lander muttering, “Not me, not me.”
She glanced at Lily, who Maria had always known to be fearless, but Lily bit her lip and turned away. Javier looked positively gray, and the twins buried their faces in their hands. Someone would have to be first. Maria closed her eyes and took a few meditative breaths, waiting for someone else to volunteer, but the lander was silent.
FINDING COURAGE
The radio crackled to life. “Lander one, this is Mothership, do you copy?”
“Yes,” Captain Curran answered. “We’ve landed safely and are waiting to exit the lander, but there’s just a little…disagreement…over which pioneer wants to be the first to set foot on our new home.”
“Tell them there’s plenty for everyone to see, and they’re going to love it out there,” the voice on the radio responded. “I wish it were me instead of you; I miss the feel of real air on my face.”
Captain Curran flipped off the microphone. “You six have lived your entire lives in space, and it’s a great privilege to be the first of your generation to see a new planet. The others are watching; if you’re afraid, they’ll be afraid. Can’t any of you find the courage to set an example?”
Maria shifted uncomfortably in her seat and thought of her parents; they had traveled across the galaxy to find their family a new home, with clean air and good soil, and she knew this planet was for them. “I’ll do it, Captain,” she mumbled as she slipped out of her harness and rose out of her seat. Maria couldn’t shake the feeling of trepidation as she stood and watched the doors of the lander slide open.
A NEW WORLD
A burst of air hit Maria in the face. She scrunched up her nose as an unfamiliar assortment of odors hit her nostrils. Some smelled sweet, some disgusting, and some were just strange. There were never strange smells on the ship; everything was always the same there. What was it going to be like to live where things changed? The rest of the children gathered around the opening as she climbed down the ladder, and Maria tried to smile as she met their worried eyes. Then, suddenly, something crunched underneath her boots; she was standing on the surface of the planet, and it felt nothing like the smooth metallic halls that she’d known all her life.
Without letting go of the ladder, she turned around to look at the world around the lander. The soil was full of shapes and textures; there were some small, grainy pieces, then larger clumps that she could break with the toe of her boot. One piece was hard and smooth, and she let go of the ladder to pick it up. “Captain,” she called, “I think I’ve found a rock!”
The air was moving, and long, thin, green things bowed and danced. “Grasses,” Maria whispered to herself, remembering the videos in her science lessons. She let go of the ladder and took soft, slow steps and realized her arms and legs felt like they were full of lead. “Natural gravity,” she whispered to herself. She started to walk a little more quickly, getting used to the new sensation. She was doing what others had previously thought impossible—taking steps on a new world.
A creature with gossamer wings landed on her nose, and she crossed her eyes trying to get a good look at it. Something small and furry scurried across her feet as she spun in a slow circle. Inspired, she ran as fast as she could across the foreign soil; she’d never seen somewhere so big, and it was thrilling. Suddenly, a deep, low sound echoed around her.
“That’s the call of a hornbeast,” Captain Curran shouted from the bottom of the ladder. Maria glanced back and saw that he was helping her friends take tentative first steps in the new world. “Walk to your left a little, and there should be a stream—flowing water on the ground; they often go there to drink, the explorers say.”
She started to run in that direction and then paused. “Hurry up!” she yelled, unable to contain her enthusiasm. “Our new home is extraordinary!”
Question
In “First Steps,” which theme is developed by Maria’s volunteering to leave the lander?
Some things cannot be learned in school.
Some things cannot be learned in school.
It takes courage to be the first to try something new.
It takes courage to be the first to try something new.
Taking unnecessary risks is foolish.
Taking unnecessary risks is foolish.
Great tasks can be accomplished by working as a team.
Answer:
I think it is C. It takes courage to be the first to try something new.
Explanation:
The story showed her courage to the first to try something new.
Hope this helps! :)