The threshold quantity for hydrogen sulfide under PSM is 1500 pounds, whereas, under RMP, the threshold is 10,000 pounds.
Each column lists all of the elements that employers must comply with when a process falls under PSM and that specific RMP program in the column header.
By clicking on an element listed in that column, employers can view the regulatory text of both PSM and the RMP program for that element.
As described at the bottom of each of those links, OSHA requirements are in bold, EPA requirements are in italics, and regular font shows areas where the regulatory requirements are identical.
For more information on the threshold quantities click on the link below:
https://brainly.com/question/26913675
#SPJ4
Match the vocabulary term with the correct definition.
hypothesis
[ Choose ]
observation
[ Choose ]
scientific inquiry
[ Choose ]
interpret
[ Choose ]
assume
[ Choose ]
Answer:
I think the answer is assume
What is (are) the major organic product(s) obtained from the following reaction?
1. (2r,3r)-dibromobutane
2. (2s,3s)-dibromobutane
3. meso-2,3-dibromobutane
The products of the reaction are (2r,3r) - dibromobutane and (2s,3s)-dibromobutane
Halogenation is a chemical process in which one or more halogens are added to a substance. Due to the widespread presence of halide-containing chemicals, this type of transformation is crucial for producing polymers and pharmaceuticals, among other things.
When a material gets brominated, the chemical reaction causes bromine to be added to the compound. The result's qualities after bromination will be different from the initial reactant.
The bromination of cis - but - 2 - ene is the reaction described. Two items are produced as a result.
Reaction:
cis - but - 2 - ene + Br₂ → (S, S) - 2,3 - dibromobutane + (R, R) - 2,3 - dibromobutane
When cis - but - 2 - ene is reacted with bromines the products of the reactions are ( 2S, 3S) - dibromobutane and ( 2R, 3R ) - dibromobutane, respectively.
Learn more about products here:
https://brainly.com/question/2608651
#SPJ4
you use 25% ethyl acetate (an ester) in hexane to run a tlc and obtain a single round spot with an rf of 0.9 for the main compound. what would you do?
We need to do is to try 35% ethyl acetate to see the results.
What is chromatography?The term chromatography has to do with the process of separation in which there is a stationary phase and a mobile phase. The stationary phase in thin layer chromatography is the adsorbent while the mobile phase is the solvent mixture.
The solvent mixture would determine the extent of separation. We know that if the compound is polar, then we need a mixture of a polar solvent and a nonpolar solvent.
The RF of 0.9 implies that the separation was minimal. Thus, what we need to do is to try 35% ethyl acetate to see the results.
Learn more about chromatography:https://brainly.com/question/24322050
#SPJ1
Missing parts;
you use 25% ethyl acetate (an ester) in hexane to run a tlc and obtain a single round spot with an rf of 0.9 for the main compound. what would you do?conclude that the sample is pure.assume that tlc will be useless and find a different way to see if the sample if pure.try a completely different set of solvents, as ethyl acetate and hexanes will never work.try 10% ethyl acetate to see the results.try 35% ethyl acetate to see the results.
What would you observed if you drop a cotton fall and rock at the same time ? would it be different if you did the same occur if performed in a vacuum tube?
We will see that rock would hit the ground first and cotton would hit later,
when we perform the same experiment in vaccum, then both will hit the ground at the same time.
No force is present in vaccum, the objects will be weightless as weight is a force. W = F = mg ( gravity is absent), g=0 so F= 0 W = 0 In vaccum space the all object will fall freely despite of their massesapparent weightlessness IS weight on an object without a support surfaceWhen gravity is zero , the object will have freefall accelaration.To know more about weightlessness visit : https://brainly.com/question/845413
#SPJ4
do all of the glassware measure with the same degree of accuracy? explain
All of the glassware do not measure with the same degree of accuracy.
What is a glassware?A glassware is an apparatus that could be used for measurement. Most of the glassware are used for the measurement of fluids. In this case, we can see that the kinds of glass ware that could be used for measurement in the laboratory are; Burette, pipette, measuring cylinder etc.
The calibration of all the glassware are not the same, recall that there must always be a measure of uncertainty that goes with the instrument that is used in measurement.
Having known this, we can see that all of the glassware do not measure with the same degree of accuracy.
Learn more about laboratory glassware:https://brainly.com/question/14728750
#SPJ1
Initially, the speed of a molecule of an ideal gas is 463 m/s. the pressure and volumeof this gas are kept constant, while the number of molecules is doubled. what is thefinal speed of the molecules?
Initially, the Final speed of a molecule of an ideal gas is 327 m/s. the pressure and volume of this gas are kept constant, while the number of molecules is doubled.
What is rms velocity?The square root of the mean of the squares of the velocity of individual gas molecules is known as the root mean square velocity (RMS value).
T = Kelvin-degree temperature.
The arithmetic mean of the velocities of various gas molecules at a specific temperature is known as average velocity. Actually, root mean square speed, not velocity, is what the RMS calculation tells you.
Considering that velocity is a vector quantity with both magnitude and direction, this makes sense.
The behavior pf the molecule is given by -
PV = 2/3 N (1/2mv²)
We may write p1v1 = p2v2,
where the subscript 1 denotes the beginning condition
subscript 2 denotes the conditions following the number of molecules being doubled, because the pressure and volume of the gas are held constant while the number of molecules is doubled. Thus,
⇒ 2/3 [N1 (1/2 mv1²)] = 2/3 [N2 (1/2 mv2²)]
⇒ N1 v1² = N2 v2²
⇒ v2 = v1 √(N1/N2)
⇒ v2 = 463 √(N1 / 2N1)
⇒ v2 = 463 / √2
⇒ v2 = 327m/s
Thus, the final speed of the molecules is 327 m/s.
To learn more about rms velocity from the given link below https://brainly.com/question/15175382
#SPJ4
Over what ph range will 3.5 m nahc2o4 and 1.8 m na2c2o4 solution be an effective buffer ? (ka1 = 5.6x10-2 and ka2 = 5.4x10-5)
The PH range of the effective buffer of NAHC2O4 is 3.5-5.2
How to compute PH level?pH is the negative base 10 logarithms ("log" on a calculator) of the hydrogen ion concentration of a solution. To calculate it, take the log of a given hydrogen ion concentration and reverse the sign.
What is the pH range of a buffer solution?Buffers are generally good over the range pH = pKa ± 1. The ammonia buffer would be effective between pH = 8.24 - 10.24. The acetate buffer would be effective in the pH range from about 3.74 to 5.74. Outside of these ranges, the solution can no longer resist changes in pH by added strong acids or bases.
To learn more about PH range, refer
to https://brainly.com/question/25922327
#SPJ4
7. When an astronaut travels from the Earth to the Moon, which of their physical properties changes: mass or weight?
Explain why one property changes but the other does not.
Answer:
Their mass stays the same but their weight changes.
Explanation:
The gravitational force of celestial bodies is determined by their mass and size. The moon has less mass than the Earth and can't pull object towards itself as well as the Earth. Thus, mass remains the same and you'd weigh less.
A solid piece of lead has a mass of 38.20 g and a volume of 3.37 cm3. from these data, calculate the density of lead in si units (kilograms per cubic meter).
The solid pieces of lead with a mass of 38.20 g has a density of 11,340 Kg/ m3
The density formula and the procedure we will use is:
ρ = m/v
Where:
v= volumeρ= densitym= massInformation about the problem:
ρ (kg/m3)= ?v = 3.37 cm3m = 38.20 gApplying the density formula, we get:
ρ = m/v
ρ = 38.20 g/ 3.37 cm3
ρ(g/cm3) = 11.34 g/cm3
Converting the density from (g/cm3) to (kg/m3), we get:
11.34 g/cm3 * (1 kg/1000g) * (1000000 cm3/1 m3) = 11,340 Kg/ m3
11.34 g/cm3 is equivalent to 11,340 Kg/ m3
What is density?It is a physical quantity that expresses the ratio of the body mass to the volume it occupies.
Learn more about density in: brainly.com/question/1354972
#SPJ4
____________ helps digest proteins in the stomach. group of answer choices bile salt pepsin nahco3 pepsinogen trypsin
Pepsin Pearls helps digest proteins in the stomach.
What is the composition of pepsin?Pepsin is a monomer (chain protein) made up of two similar folding domains separated by a deep cleft. Pepsin's catalytic site is formed at the domain junction; each domain contains two aspartic acid residues.Here are some important pepsin advantages:
Aids the body in breaking down difficult-to-digest proteins.Indigestion and leaky gut are avoided.Increases the production of bile.Assists with liver detoxification.Improves nutrient absorption.Aids in the prevention of nutritional deficiencies.Pepsin is a stomach enzyme that aids in the digestion of proteins found in food. Pepsin is secreted by gastric chief cells as an inactive zymogen known as pepsinogen. Parietal cells in the stomach lining secrete hydrochloric acid, which lowers the stomach's ph. Pepsin is activated by a low pH (1.5 to 2).To learn more about Pepsin Pearls refer to
https://brainly.com/question/6258301
#SPJ4
Write a formula for the ionic compound that forms between each pair of elements.
The ionic compound between each pair of elements has the following formula:
(a) Al₂S₃
(b) AlN
(c) K₂O
(d) SrI₂
(e) MgO
(f) BaF₂
(g) SrS
(h) Be₃N₂
The formula for the ionic compound for each pair is:
(a) Aluminium and Sulfur
Aluminum sulfide, also known as Al₂S₃, is created when aluminum and sulfur combine. Its molar mass is 150.158 g/mol. Al has a +3 oxidation state while the sulfur in Al₂S₃ is in a -2 oxidation state.
Al⁺³ + S⁻² → Al₂S₃
(b) Aluminium and Nitrogen
Solid aluminum nitride is known as aluminum nitride (AlN). It is an electrical insulator with high thermal conductivity of up to 321 W/(mK).
Al⁺³ + N⁺³ → AlN
(c) Potassium and Oxygen
When potassium and oxygen are combined, potassium oxide results as an ionic molecule. It has the chemical composition K₂O. Because it is highly reactive, potassium cannot be found in its free form. It easily forms K₂O when combined with oxygen atoms due to its +1 valency.
( K₂ )⁺¹ + O²⁻ → K₂O
(d) Strontium and iodine
Ions of strontium and iodide combine to form the ionic compound known as strontium iodide.
Strontium has the chemical symbol Sr and a valency of +2. Iodine also bears the symbol I and the valency of -1.
(Sr)⁺² + I⁻¹ → SrI₂
(e) Magnesium and Oxygen
Magnesium oxide MgO) is created through the ionic interaction of magnesium (Mg) with oxygen (O₂). While oxygen has six valence electrons, magnesium only has two.
Mg⁺² + O²⁻ → MgO
(f) Barium and Fluorine
Because it is made up of a barium cation with a +2 charge and a fluoride anion with a charge of 1, barium fluoride is an ionic compound. This substance has the chemical formula BaF₂.
Ba²⁺ + F⁻¹ → BaF₂
(g) Strontium and Sulfur
Strontium serves as the anion and sulfur is the cation. Due to its presence in Group II, strontium has a valency of 2. The sulfur atom will gain 2 electrons and currently has 6 electrons in its outermost shell. Sulfur's valency is therefore 2.
Sr⁺² + S²⁻ → SrS
(h) Beryllium and Nitrogen
Because nitrogen is a non-metal and beryllium is a metal, an ionic link is created between the two. Be₃N₂ is formed when Beryllium and nitrogen is reacted.
Be²⁺ + N³⁻ → Be₃N₂
Learn more about ionic compound here:
https://brainly.com/question/2687188
#SPJ4
The complete question is mentioned below:
Write a formula for the ionic compound that forms between each pair of elements.
a. Aluminum and Sulfur
b. Aluminum and Nitrogen
c. Potassium and Oxygen
d. strontium and iodine
e. magnesium and oxygen
f. barium and fluorine
g. strontium and sulfur
h. beryllium and nitrogen
Set up the Gizmo to observe freezing. What do you notice about the temperature while the water is in the process of freezing?
The temperature while the water is in the process of freezing it is observed that is solidifies .
What is the process of freezing?
The process through which a substance transforms from a liquid to a solid is known as freezing.
When a liquid's molecules slow down enough to attract one another into permanent positions as a solid, this process is known as freezing.
When water freezes, energy is emitted into the environment, which leads energy to be lost and causes the environment to "cool down".
Since it is not thought to exist, the term "cooling" is not well understood in chemical research and would instead be substituted by the phrase "absence or loss of heat."
When a body's temperature drops, it is said to be cooling. If the temperature drops further, as it would with water, it would ultimately approach the freezing point, which for water is 0 degrees Celsius.
As a result, when cooling passes this thermal barrier, the water "freezes." The freezing point of pure water is 0 degrees Celsius.
To learn more about, freezing refer to the below link:
https://brainly.com/question/12919973
#SPJ1
How is force and gravity work together with simple objects?
Force and gravity work together with simple objects exert an equal attractive force
Gravity or gravitational force is the force of attraction between any two objects in the universe and the force of attraction depends on the mass of the object and the square of the distance between them and it is by far the weakest known force in nature the size of the gravitational force is proportional to the masses of the objects and weakens as the distance between them increases and both objects exert an equal attractive force on each other and falling object is attracting the earth with the same size force as the earth is attracting it
Know more force and gravity
https://brainly.com/question/28667537
#SPJ1
why is the water a liquid and h2s a gas ?
Explanation:
This is because the hydrogen bonding in water H2O is stronger than that is hydrogen sulfide H2S.
If the ph outside the cell decreases, would you expect the amount of amino acids transported into the cell to increase or decrease?
A decrease in pH means a rise in positively charged H+ ions, and a rise in the electrical gradient across the membrane. The transport of amino acids into the cell will increase.
How do amino acids move across the cell membrane?
The amino acids are diffused across the cell wall by facilitated diffusion with the help of symporter proteins present in the plasma membrane. These also are called sodium-dependent amino acid transporters.
What do the cells do with the amino acids?
The gastrointestinal system breaks all proteins down into their amino acids so that they can enter the bloodstream. Cells then use the amino acids as building blocks to create enzymes and structural proteins.
Learn more about amino acid transportation:
brainly.com/question/2139278
#SPJ4
Vinegar has preservative and antimicrobial properties due to the ability of the active ingredient to cross the membrane as ______________. once in the cytoplasm, it become
Vinegar has preservative and antimicrobial properties due to the ability of the active ingredient to cross the membrane as CH₃COOH. Once in the cytoplasm, it becomes Deprotonated.
Vinegar is a natural preservative. It enhances the microbiological safety and extending the life. Production of vinegar is a two step process , where yeasts convert sugars into alcohol, followed by acetobacter, which oxidise alcohol to acetic acid.
Vinegar is a crude acetic acid and possess antimicrobial properties, which kills microorganisms and enhance microbiological safety of food.
Deprotonated simply means the removal of a proton from a chemical compound. The acetic acid in vinegar cross the membrane and become deprotonated, i.e., removal of proton in the cytoplasm which disturbs the normal pH.
To learn more about preservative and antimicrobial properties,
https://brainly.com/question/13143954
#SPJ4
The most common technique used to measure oxygen consumption in an exercise physiology laboratory is?
The most common technique used to measure oxygen consumption today is termed open-circuit spirometry.
What is open-circuit spirometry?The method of performing spirometry known as "open circuit" entails the subject inhaling as much air as possible from the surrounding environment, putting the mouthpiece in his or her mouth, and then exhaling either slowly (SVC) or quickly (FVC) until the end-of-test criterion is reached. With devices based on wedge bellows, bell, water seal, or rolling seal cylinder/piston-based volume sensing spirometers, open circuit approach is frequently utilized.
The method of measuring spirometry known as "closed circuit" spirometry involves having the subject place a flow transducer in their mouth, breathe normally for two to three tidal breaths (rest breathing), take a maximal inspiration or expiration through the flow transducer, and then slowly inhale or exhale.
To learn more about open-circuit spirometry from the given link:
https://brainly.com/question/997466
#SPJ4
please help i'll give brailiest!!
It is negatively charged
As the diagram showed,
inner part contains nucleus which constitute proton and neutron
and the outer part contain electron dense clouds which is negatively charged
The term "electron" refers to the subatomic particle that is negatively charged and located outside the atom's nucleus.An atom is made up of three subatomic particles: electrons, protons, and neutrons. Protons are positively charged, neutrons are neutral, and electrons have a negative charge. Electrons were discovered by J.J. Thomson, who also determined the electron's charge mass ratio. The mass of an electron is 9.110319.1times10-319.11031, while the charge on an electron is 1.61019-1.6times10-191.61019 C. Electrons in an atom reside outside of the nucleus and are kept there by intense electrostatic forces.To know more about Electrons visit : https://brainly.com/question/1255220
#SPJ9
What is the charge on each of the following complex ions? hexaaquachromium(ii), [cr(h2o)6]?[cr(h2o)6]? tris(carbonato)ferrate(iii), [fe(co3)3]?[fe(co3)3]? diaquatetrachlorovanadate(iii), [v(h2o)2cl4]?
a) Ch +2, and H2O 0 so complex has 2+
b) Fe +3 and CO3-6 so complex has -3
c) V +3, H2O 0, Cl -1 so complex has -1
What is meant by complex charge?
A charge transfer complex, also known as the electron donor acceptor complex, is a grouping of two or more molecules or of several chemical components where some electronic charge is transmitted between the molecular entities.
A complexion or coordinating entity's charge number refers to the net charge it carries.
To learn more about complex charge click the given link
https://brainly.com/question/16890810
#SPJ4
Grass and plants get energy from
A
the sun.
B
eating food.
C
windmills.
D
electrons.
a. water in a 150 ml container volume with a diameter of 12 cm evaporates faster and therefore has a greater vapor pressure than a container with a volume 75 ml a diameter of 5.5 cm
Water in a 150 ml container volume with a diameter of 12 cm evaporates faster and therefore has a greater vapour pressure than a container with a volume 75 ml and a diameter of 5.5 cm, because the diameter of 150 ml container is more and more space is exposed, so it evaporates more quickly in lesser time.
The vapour pressure is due to escaping tendency of water molecule from surface of liquid. Vapour pressure is dependent on the number of molecules on the surface of liquid.
If number molecules on surface of molecules is greater, greater would be the vapour pressure.
Since, 150 mL container is with 12 cm diameter, its surface area is larger and it has more number of water molecules on the surface. So, it has greater vapour pressure than the 75 ml container and the water also evaporates faster due to large surface area and more exposure.
To learn more about vapour pressure and evaporation,
https://brainly.com/question/860956
#SPJ4
A buffer solution is composed of 8.50 mol of acid and 2.25 mol of the conjugate base. if the pa of the acid is 4.20 , what is the ph of the buffer?
A buffer solution is composed of 8.50 mol of acid and 2.25 mol of the conjugate base.
What is pH of a solution?
The concentration of hydrogen (H+) ions in a solution, which is a measurement of acidity, is known as the pH of that solution. Acidic solutions have a pH under 7. The same holds true for solutions that have a pH higher than 7.
A buffer solution is one that prevents the pH of a solution from changing when a little amount of a strong acid or basic is added.
Given,
pKa of acid = 4.20
[acid] = 8.50
[base] = 2.25
pH of buffer = pKa + log [base]/[acid]
= 4.20 + log[2.25/8.50]
=3.622
Thus, pH of the buffer is 3.662.
To learn more about pH of a solution from the given link below,
https://brainly.com/question/17466036
#SPJ4
20 CCC Proportion What are the top three sources of U.S. electricity
generation? Estimate the overall efficiency of U.S. electricity
generation. How does this compare to the efficiency for
transportation?
The United States uses many different energy sources and technologies to generate electricity. The sources and technologies have changed over time, and some are used more than others.
The three major categories of energy for electricity generation are fossil fuels (coal, natural gas, and petroleum), nuclear energy, and renewable energy sources. Most electricity is generated with steam turbines using fossil fuels, nuclear, biomass, geothermal, and solar thermal energy. Other major electricity generation technologies include gas turbines, hydro turbines, wind turbines, and solar photovoltaics.
Natural gas was the largest source—about 38%—of U.S. electricity generation in 2021. Natural gas is used in steam turbines and gas turbines to generate electricity.
Coal was the second-largest energy source for U.S. electricity generation in 2021—about 22%. Nearly all coal-fired power plants use steam turbines. A few coal-fired power plants convert coal to gas for use in a gas turbine to generate electricity.
Petroleum was the source of less than 1% of U.S. electricity generation in 2021. Residual fuel oil and petroleum coke are used in steam turbines. Distillate—or diesel—fuel oil is used in diesel-engine generators. Residual fuel oil and distillates can also be burned in gas turbines.
For more information on electricity generation click on the link below:
https://brainly.com/question/12475693
#SPJ4
John ordered 1.25 kg of zinc for an experiment when he weighed it, he measured 1.13 kg what is the percent error of Johns measurement
Question
A watershed is the area of land where all of the water drains off and eventually combines at a central point. As water runs off it picks up different types of surface pollution leftover from agricultural, industrial, commercial, and other types of human activity. Why does the pollution in a watershed have such a heavy impact on its inhabitants?
Responses
A the water combines and the pollutants become more concentratedthe water combines and the pollutants become more concentrated
B the water combines and the pollutants become less concentratedthe water combines and the pollutants become less concentrated
C the species that inhabit the watershed must have the pollution in order to survivethe species that inhabit the watershed must have the pollution in order to survive
D pollution does not affect the inhabitants of a watershed
The pollution in a watershed have such a heavy impact on its inhabitants because the water combines and the pollutants become more concentrated.
What is pollution?Pollution is defined as the introduction of harmful material to the environment. These harmful material is called pollutant.
Pollutant can be natural such as volcanic ash. They can also be created by human effect.
There are four types of pollution
Water pollutionLand pollutionAir pollution Soil pollutionThus, the pollution in a watershed have such a heavy impact on its inhabitants because the water combines and the pollutants become more concentrated.
To learn more about pollution, refer to the link below:
https://brainly.com/question/23857736
#SPJ1
An element belongs to group 17 of the periodic table. This element is most likely a . A solid sample of this element would have a appearance.
The periodic table's group 17 substance is probably a halogen. This element would appear metallic or black in solid form.
What are the elements of the 17th group?The six elements in Group 17 of the periodic table compose the halogen elements. In the periodic table, group 17 is represented by the elements fluorine (F), chlorine (Cl), bromine (Br), iodine (I), astatine (At), and tennessine (Ts).
Why is Group 17 called halogens?From top to bottom, the group 17 elements are fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At). They are known as "halogens" because when they interact with metals, they produce salts.
The elements that make up group 17 of the periodic table are the halogens. They are nonmetals that are reactive, such as iodine, bromine, chlorine, and fluorine. Halogens are non-metals that are very reactive. These substances share a lot of characteristics with one another.
To know more about metals :
https://brainly.com/question/28650063
#SPJ9
one pound-mass of diatomic nitrogen (n2) is contained in a 100-gal tank. find the specific volume on both mass and mole basis.
The specific volume of diatomic nitrogen is 13.37 ft³/lb by mass and 0.0265 m³/mol by mole.
1) m(N2) = 1 lb; mass of diatomic nitrogen
V(N2) = 100 gal = 13.37 ft³; volume of diatomic nitrogen
The standard unit for specific volume is cubic meters per kilogram or cubic feet per pound (ft³/lb).
ν = V / m; formula used to calculate specific volume (ν) by mass
ν = 13.37 ft³ / 1 lb
ν = 13.37 ft³/lb; specific volume by mass
2) M(N2) = 28 g/mol = 0.070 lb/mol; molar mass of diatomic nitrogen
n(N2) = 1 lb / 0.070 lb/mol
n(N2) = 14.29 mol; amount of diatomic nitrogen
ν = V / n; formula used to calculate specific volume (ν) by mole
ν = 13.37 ft³ / 14.29 mol
ν = 0.936 ft³/mol = 0.0265 m³/mol; specific volume (ν) by mole
The molar volume has the SI unit of cubic metres per mole (m³/mol)
More about specific volume: brainly.com/question/14727614
#SPJ4
In _______, the inhibitor competes with substrate for binding to the active site, but does not covalently modify the active site.
The answer would be the competitive inhibition, the inhibitor competes with the substrate for binding to the active site, but does not covalently modifying the active site.
In competitive inhibition, the inhibitor (I) firmly be like the actual substrate (S), and is considered as a substrate analogue. The inhibitor takes part with substrate and cohere at the active site of the enzyme but does not go any catalysis. As long as the competitive inhibitor hold on to the active site, the enzyme is not present for the substrate to cohere. A competitive inhibitor vanished the rate of catalysis by lessen the portion of enzyme molecules to a substrate. At any given inhibitor concentration, competitive inhibition can be pleased by expanding the substrate concentration.
To know more about Competitive Inhibition here :
https://brainly.com/question/13554208?referrer=searchResults
#SPJ4
certain meteorites have been examined and found to carry samples of which molecules? select all that apply.
Lipids, nucleotides, amino acids, and monosaccharides are the proper answers as to which molecules are present in some of the meteorites that have been studied.
Define Meteorites.Rocks or metal fragments from space are referred to as meteorites because they fall to earth. Some scientists, particularly those looking to support or refute the Panspermia idea, which holds that life originated from other planets, have investigated and analyzed these rocks and metals in great detail.
Compounds like lipids, DNA, RNA, and amino acids were discovered in several research.Before 2019, there had been no indication of monosaccharides, but in 2019 a global team found sugars like xylose and arabinose in several meteorites.Although its precursor, amino acids, have been found in meteorites, no polypeptides have been.Lipids, nucleotides, amino acids, and monosaccharides are thus the proper answers to the compounds discovered in several meteorites.
Learn more about monosaccharides here:-
https://brainly.com/question/1157431
#SPJ4
thermal properties and calcium-magnesium-alumina-silicate (cmas) resistance of lupo4 as environmental barrier coatings.
Thermal properties and calcium-magnesium-alumina-silicate (cmas) resistance of lupo4 as environmental barrier coatings lupo4 synthesized by chemical precipitation and calcination
Thermal properties means material-dependent response when heat is distributed to a solid body, a liquid, or a gas and then temperature increase, a phase transition, a change of length or volume, an formationof a chemical reaction or the change of some other physical or chemical property or quantity called as thermal properties. so here thermal properties and calcium-magnesium-alumina-silicate (cmas) resistance of lupo4 is the phase stability and the thermal properties of the ceramics as well as the thermochemical reactions between lupo4 pellet and calcium–magnesium–alumina–silicate at 1300°C this dense and continuous layer can effectively inhibit molten cmas penetration into lupo4.
Know more about thermal properties
https://brainly.com/question/28537536
#SPJ4