Answer:
D.
Explanation:
Specifically, Special Relativity showed us that space and time are not independent of one another but can be mixed into each other and therefore must be considered as the same object, which we shall denote as space-time. The consequences of space/time mixing are: time dilation. and length contraction.
The opening graph in the video shows the measured relative abundances of elements in the galaxy. What is the 4th most abundant element?.
Answer: Carbon
Explanation:
The opening graph in the video shows the measured relative abundances of elements in the galaxy. What is the 4th most abundant element? Carbon has the fourth highest dot on the graph, and therefore is the fourth most abundant element.
Answer:
Carbon is the masured relative abundant element.
A country creates a park to protect a forest, what type of resource?
A gyroscope flywheel of radius 2.12 cm is accelerated from rest at 16.2 rad/s2 until its angular speed is 1820 rev/min. (a) what is the tangential acceleration of a point on the rim of the flywheel during this spin-up process
The tangental acceleration of the flywheel of radius 2.12 cm with a final angular velocity of 1820 rev/min and an angular acceleration of 16.2 rad/s is 0.34 m/s².
What is tangental acceleration?This is the rate of change of tangental velocity of an object in circular motion.
To calculate the tangental acceleration, we use the formula below.
Formula:
a = αr............. Equation 1Where:
a = Tangental accelerationr = radius of the flywheelα = Angular acceleration of the flywheel.From the question,
Given:
r = 2.12 cm = 0.0212 mα = 16.2 rad/s²Subsitute these values into equation 1
a = (0.0212×16.2)a = 0.34 m/s²Hence, The tangental acceleration of the flywheel of radius 2.12 cm with a final angular velocity of 1820 rev/min and an angular acceleration of 16.2 rad/s is 0.34 m/s².
Learn more about tangental acceleration here: https://brainly.com/question/11476496
1. A particle has a mass of 10 kg and a velocity of 5 m/s. What is the momentum of the
particle?
✰ Concept :-
⠀
We know that momentum is the product of mass and velocity. Thus, by the following definition, we get :-
⠀
[tex] \qquad \maltese \: \underline{ \boxed{ \purple{ \sf Momentum = Mass \times Velocity }}} \: \star[/tex]
⠀
✰ Given Information :-
⠀
A particle has mass 10 kgMoving with velocity 5 m/s⠀
✰ To Find :-
⠀
The momentum of the particle⠀
✰ Solution :-
⠀
Using the formula from the concept section, we get :-
⠀
[tex]\sf \longrightarrow Momentum =10 \: kg \times 5 \: {m}^{ - 1} ~~~ \\ \\ \\\sf \longrightarrow Momentum = {50~kg \: ms}^{ - 1} \: \: \: \: \: \: \: \: \: \: \: \: \\ \\ \\ \sf \longrightarrow \underline{ \boxed{ \frak{ \orange{Momentum = {50 ~kg\: ms}^{ - 1} }}}} \: \star \: \: \: \: \: \: \\ \\ [/tex]
Thus, the momentum of the particle is 50 kg m/s.
⠀
[tex] \underline{ \rule{230pt}{2pt}} \\ \\ [/tex]
While looking through a telescope, an astronomer views an object that is moving and appears to have a tail. The astronomer states that the tail is caused by evaporation. What is the astronomer most likely observing?.
Answer:
A comet
Explanation:
A comet is composed of mostly ice. As it passes close to the sun, it warms up and begins to release gases, the gases seem longer and they look like a tail. Because the ice gets warmer close to the sun and because it's icy, it changes from ice to liquid and finally vapour. hence evaporaction.
b. The silica cylinder of a radiant wall heater is 0.6 m long
and has a radius 6 mm. If it is rated at 1.5 kw estimate
its temperature when operating. [The Stefan constant,
6=6 x 10-8 wm-2-4)
Ans: 1025 K
So, If the silica cyliner of the radiant wall heater is rated at 1.5 kw its temperature when operating is 1025.3 K
To estimate the operating temperature of the radiant wall heater, we need to use the equation for power radiated by the radiant wall heater.
Power radiated by the radiant wall heaterThe power radiated by the radiant wall heater is given by P = εσAT⁴ where
ε = emissivity = 1 (since we are not given), σ = Stefan-Boltzmann constant = 6 × 10⁻⁸ W/m²-K⁴, A = surface area of cylindrical wall heater = 2πrh where r = radius of wall heater = 6 mm = 6 × 10⁻³ m and h = length of heater = 0.6 m, and T = temperature of heaterSince P = εσAT⁴
P = εσ(2πrh)T⁴
Making T subject of the formula, we have
Temperature of heaterT = ⁴√[P/εσ(2πrh)]
Since P = 1.5 kW = 1.5 × 10³ W
Substituting the values of the variables into the equation, we have
T = ⁴√[P/εσ(2πrh)]
T = ⁴√[1.5 × 10³ W/(1 × 6 × 10⁻⁸ W/m²-K⁴ × 2π × 6 × 10⁻³ m × 0.6 m)]
T = ⁴√[1.5 × 10³ W/(43.2π × 10⁻¹¹ W/K⁴)]
T = ⁴√[1.5 × 10³ W/135.72 × 10⁻¹¹ W/K⁴)]
T = ⁴√[0.01105 × 10¹⁴ K⁴)]
T = ⁴√[1.105 × 10¹² K⁴)]
T = 1.0253 × 10³ K
T = 1025.3 K
So, If the silica cylinder of the radiant wall heater is rated at 1.5 kw its temperature when operating is 1025.3 K
Learn more about temperature of radiant wall heater here:
https://brainly.com/question/14548124
4) A basketball is launched at a velocity of 25 m/s in a direction making an angle of 50° upward with the
horizontal. What is the maximum height reached by the object?
Answer:
As Per Provided Information
Velocity of projection u is 25m/sAngle made by ball ∅ is 50°We have been asked to determine the maximum height reached by the object .
here we will take acceleration due to gravity g is 9.8 m/s².
For calculating the maximum height attained by the object we will use the following formula .
[tex] \boxed{\bf \:H_{(max)} \: = \cfrac{u {}^{2} {sin}^{2} \theta }{2g}}[/tex]
Substituting all the value in above equation we obtain
[tex]\sf \qquad \: \longrightarrow\:H_{(max)} \: = \cfrac{ {25}^{2} {sin}^{2} {50}^{ \circ} }{2 \times 9.8} \\ \\ \\ \sf \qquad \: \longrightarrow\:H_{(max)} = \cfrac{625 \times(0.766) {}^{2} }{19.6} \\ \\ \\ \sf \qquad \: \longrightarrow\:H_{(max)} = \cfrac{625 \times 0.586756}{19.6} \\ \\ \\ \sf \qquad \: \longrightarrow\:H_{(max)} = \cfrac{366.7225}{19.6} \\ \\ \\ \sf \qquad \: \longrightarrow\:H_{(max)} = \cancel \cfrac{366.7225}{19.6} \\ \\ \\ \sf \qquad \: \longrightarrow\:H_{(max)} =18.71 \: m[/tex]
Therefore,
Maximum height reached by the object is 18.71 meters.
A bike first accelerates from 0.0m/s to 5.0m/s in 4.5s, then continues at this constant speed for another 4.5s. What is the total distance traveled by the bike
Initial speed u= 0.0 m/s
Final speed v= 5.0 m/s
Time t1= 4.5s
Time for constant speed t2=4.5s
to calculate the total distance traveled by the bike:d = d₁ + d₂
1 = ( v+u/2) × 1₁ + v × 1₂
v = final speed
u = initial speed
t₁ = time for first accelerates
t2 = time for constant speed
d = (5+0/2) × 4.5+ 5.0 x 4.5
d = 33.75m
so, the total distance traveled by the bike is 33.75 m.
# 1
[tex]\bold{a = \frac{(5-0)}{4.5} = 1.11 m/s^2 }[/tex]
[tex]\bold{ v = 0 + a \: t = 1.11 \times 4.5 = 5 }[/tex]
[tex]\bold{ d = 0 + 0 (4.5) + (\frac{1}{2})(1.11)(4.5)^2 =11.2 }[/tex]
# 2
[tex]\bold{ a = 0 }[/tex]
[tex]\bold{ v = 5 }[/tex]
[tex]\bold{ d = 11.2 + 5 (4.5) + 0}[/tex]
[tex]\bold{ = 11.2 + 22.5 = 33.7 meters}[/tex]
A sound wave has a wavelength of 1.32 m and travels at a speed of
350 m/s. What is the frequency of this sound wave?
Answer:
0.00377143
Explanation:
You would have to divide to get the frequency.
1.32/350 = 0.00377143
I apologize if it is incorrect-
I hope it helps! Have a great day!
Anygays-
What is your understanding of Electricity? Describe how electricity works, circuits, how does it move, what is moving? Where does electricity come from?
HELP!! ALL MY POINTS WILL BE GIVEN
an airplane's speed at the time of landing is 90 m/s. ten seconds later it had a speed of 30 m/s. what was the acceleration of the airplane?
Answer:
-6 m/s^2
Explanation:
30 - 90 = -60
-60 / 10 = -6
If acceleration was constant, it will be -6 m/s^2
City leaders in a mid-sized city want to decrease carbon dioxide emissions associated with transportation in the
city.
Which two practices would most likely result in a decrease in carbon dioxide emissions?
Increase the fare for riding on buses.
Widen highways to allow for more cars.
Use electric buses instead of buses that use diesel fuel.
Increase the number of taxis allowed to operate in the city.
Provide community-owned bicycles to residents to use on errands.
The two practices are;
Use electric buses instead of buses that use diesel fuelProvide community-owned bicycles to residents to use on errands.Carbon dioxide emissionThe carbon dioxide emission results from the combustion of fossil fuels such as petrol, coal, firewood etc.
How to reduce carbon dioxide emissionCarbon dioxide emission can be reduced through the following practices;
The use of electric cars The use of solar energy to power our housesThe use of hydrogen fuel, etcThus, the two practices would most likely result in a decrease in carbon dioxide emissions are;
Use electric buses instead of buses that use diesel fuelProvide community-owned bicycles to residents to use on errands.Learn more about carbon dioxide emission here: https://brainly.com/question/11383616
Which terms describe the different movements of earth? check all that apply. rotation revolution tilted orbit lunar cycle elliptical orbit
Revolution and rotation are the terms that describe the different movements of the earth.
What is the earth?Our home planet is Earth. Earth and its moon, according to scientists, originated about the same period as the rest of the solar system.
That would have been around 4.5 billion years ago, according to scientists. Earth is the solar system's fifth-largest planet.
The rotation and revolution of the earth are two different movements. The movement of the earth on its axis is known as rotation.
Revolution is the movement of the earth around the sun in a fixed route or orbit. The earth's axis, which is an imaginary line, forms a 6612° angle with its orbital plane.
Hence revolution and rotation are the terms that describe the different movements of the earth.
To learn more about the earth refer to the link;
https://brainly.com/question/14042561
differentiate between beam and physical balance
Answer:
Physical Balance
•Physical balance are utilized for precision mass measurement.
•Physical balance can measure accurately upto a milligram.
Beam balance
•Beam consists of a horizontal beam, supported at it's centre.
•The object is kept on one pan and the standard massess in the other.
Explanation:
mark me brainliest
All of the following are dimensions of progressive overload except multiple choice specificity. time. intensity. frequency.
Progressive overload is the gradual increase in stress to which we subject the body during training, where time, intensity and frequency are dimensions of it.
What is progressive overload?It is a training principle that emphasizes a progressive intensification of stress on the muscles.
It involves the systematic application of training stimuli that force the body to adapt and grow by manipulating the variables of frequency, time and intensity.
Therefore, we can conclude that progressive overload is the gradual increase in stress to which we subject the body during training, where time, intensity and frequency are dimensions of it.
Learn more about dimensions of progressive overload here: https://brainly.com/question/14614199
Two identical (same mass and shape) balls of clay are flying through the air. Ball A is
moving to the right at 4 m/s, while ball B is moving left at 6 m/s. They collide in a
perfectly inelastic collision. What is the velocity of the resulting mass (positive is to
the right)?
Answer in units of meters/second (m/s)
The velocity of the resulting mass after the perfectly inelastic collision of identical balls of clay A and B is 1 m/s to the left.
Conservation of linear momentum
The final velocity of the two identical balls is determined by applying the principle of conservation of linear momentum as shown below;
m₁u₁ + m₂u₂ = v(m₁ + m₂)
where;
u₁ is the initial velocity of ball Au₂ is the initial velocity of ball Bv is the final velocity of both balls after collisionm₁ and m₂ are masses of the two ballsm₁ = m₂ = m
let right direction = positive direction
let left direction = negative direction
m(4) + m(-6) = v(m + m)
4m - 6m = 2mv
-2m = 2mv
v = -2m/2m
v = - 1 m/s
Thus, the velocity of the resulting mass after the perfectly inelastic collision of identical balls of clay A and B is 1 m/s to the left.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
Two small speakers, 0.695 m apart, are facing in the same direction. They are driven by one 668 Hz oscillator and therefore emit identical sound waves in phase with one another at the respective points of origin. (The speed of sound waves in air is 343 m/s.)
(a) A sound engineer wishes to stand in front of one of the speakers, at the closest point (i.e., smallest x-value) where intensity is at a relative maximum. At what distance x from the nearest speaker should he position himself? (Enter your answer in m.)
(b) The sound engineer now wishes to stand at the closest point along that line where intensity is at a relative minimum. At what distance x should he position himself now? (Enter your answer in m.)
A) The distance x from the nearest speaker when intensity is at maximum ; 0.4272 m
B) The distance x from the nearest speaker when intensity is at minimum ; 0.8123 m
Given data :
Distance between speakers ( d ) = 0.695 m
Frequency of oscillator = 668 Hz
Speed of sound waves in air ( v ) = 343 m/s
A) Determine the distance x from the nearest speaker when he stands where intensity is at maximumGiven that
λ = v / f
= 343 / 668
= 0.5135
Also
Δx = [tex]\sqrt{d^2+x^2} - x[/tex]
Δx = λ for maximum intensity
λ = [tex]\sqrt{d^2+x^2} - x[/tex]
x = ( d² - λ² ) / λ
= ( 0.695² - 0.5135² ) / 0.5135
= 0.4272 m
B) Determine the distance x from the nearest speaker when he stands where intensity is at minimumGiven that
λ = v / f
= 343 / 668
= 0.5135
Also
Δx = S₁P - S₂P
Δx = [tex]\sqrt{d^2+x^2} - x[/tex]
since the intensity is minimum
Δx = λ/2
Therefore
λ/2 = [tex]\sqrt{d^2+x^2} - x[/tex]
x = ( d² - λ²/4 ) / λ
= ( 0.695² - 0.5135² / 4 ) / 0.5135
= ( 0.695² - 0.0659 ) / 0.5135
= 0.4171 / 0.5135 = 0.8123 m
Hence we can conclude that The distance x from the nearest speaker when intensity is at maximum ; 0.4272 m and The distance x from the nearest speaker when intensity is at minimum ; 0.8123 m.
Learn more about sound intensity : https://brainly.com/question/17062836
A toy car pushed across the floor is observed to slow down and stop based on Newton’s first law of motion what is the best conclusion
A : an object in motion eventually stops
B. The car must have been going slightly uphill
C. The car did not have enough mass to keep going
D. There must have been an unbalanced force acting on the toy car
An object in motion eventually stops because of friction.
What is Newton’s first law of motion?Newton's first law states that if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or continue its moving in a straight line at constant speed unless force is applied on it.
So we can conclude that An object in motion eventually stops is the correct answer.
Learn more about law here: https://brainly.com/question/820417
positively charged center of an atom
Answer:
the nucleus
Explanation
CAN ANYONE HELP ME???????????
Answer:
D -- 12
Explanation:
Hope this helps! Please let me know if you need more help or think my answer is incorrect. Brainliest would be MUCH appreciated. Also remember to rate answers to help other students, While leaving thanks to answers that help you. Have a great day!
3. What is mechanical advantages and velocity ratio of a machine?
Answer:
Mechanical advantage:
i. The ratio of load to effort on a balanced lever is called mechanical advantage.(Definition)
ii. Mechanical advatage (MA) = Load (L)/Effort (E) (Formula)
Velocity ratio:
i. The ratio of effort distance to load distance is called velocity ratio.(Definition)
ii. Velocity ratio (VR) = effort distance(Ed)/ load distance(Ld). (Formula)
How do you think the switch controls the flow of current to the light?
Answer:
A switch interrupts the flow of current in a circuit.
Explanation:
An easy 20 points + brainiest.
Name the order of the planets in our solar system and our solar system's name.
Answer:
Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, Milky Way ;-;
True or False : Waves lose most of their energy when traveling across the ocean.
Answer:
true
Explanation:
that's the answear
Answer:
it is false i got
Explanation:
it right
Which of these is evidence of global warning?
A) Rising global temperatures
B) An overall decrease in sea levels
C) Stable precipitation patterns
D) An increase in the size of glaciers
Answer:
D
Explanation:
because the glaciers melt adding more water into the sea which make the sea levels rise.
How much magnification is needed to see a nanometer?.
Which of the following limiting factors would be directly affected by a drought? a. birth/death rate b. immigration c. available niche d. resource supply Please select the best answer from the choices provided A B C D
Answer:
C. answer pa brailest need lang po please
D. Resource Supply this would be directly affected first then the rest would follow after a period of time.
A solid cylindrical disk has a radius of 0.15 m. It is mounted to an axle that is perpendicular to the circular end of the disk at its center. When a 50-N force is applied tangentially to the disk, perpendicular to the radius, the disk acquires an angular acceleration of 110 rad/s2. What is the mass of the disk?
Answer:
Torque = I α = 1/2 M R^2 α where α is the angular acceleration
Torque = F R where F is applied to a distance R from center
F R = 1/2 M R^2 α
M = 2 F / (R α) = 2 * 50 / (.15 * 110) = 6.06 kg
If 2 waves collide with each other, would they cancel out, or merge?
Answer:
It depends on the velocity, if 1 wave is going faster than the other, it could eat the other wave and thus: Merge.
If they are the same speed they would cancel out, it would be like 2 trucks hitting each other.
Explanation:
If 2 waves crash at 15mph they would splash back and fall into the water. Think about boxers.
Answer: Destructive interference occurs when waves come together in such a way that they completely cancel each other out. When two waves interfere destructively, they must have the same amplitude in opposite directions.
Hope this helps :)
Diagram of simple cell and dry cell
Answer:
Please see the file attached