N- type of semiconductor is denoted by positive ion and free electron.
What is semiconductor?An object known as a capacitor is one that uses an electric field to store electrical energy. There are two terminals on this passive electrical component.
Capacitance is the name for a capacitor's result. A capacitor is a component made to increase the capacitance in a circuit, even though there is some capacitance between any two electrical conductors that are close to one another in a circuit. Condensers and condensators were the previous names for capacitors. Although condenser microphones, sometimes known as capacitor microphones, are an important exception, this word and its cognates are still often used in many other languages outside English.
Practical capacitors come in a wide variety of physical shapes and constructions, and they are used in a variety of ways. A minimum of two electrical conductors are typically found in a capacitor.
To learn more about semiconductor from the given link:
https://brainly.com/question/22839757
#SPJ4
two or more of the following sets of displacements when carried out in the order shown have the same resultant which are they
(a), (b), and (C) have the same resultant.
In two-dimensional,
When a body moves in the east direction or positive x-axis then is denoted by [tex]\hat{i}[/tex] and when the body moves in the north direction or positive y-axis then is denoted by [tex]\hat{j}[/tex].
For option (a),
2m east, 3m north, 4m west
Let's say the initial position is origin then,
[tex]2\hat{i} + 3\hat{j} - 4\hat{i} = - 2\hat{i} + 3\hat{j}[/tex]
Then the displacement is:
= √ [ (-2)² + (3)² ]
= √[ 4 + 9] = √13 m
For (b),
2m north, 3m west, 4m east
[tex]2\hat{j} - 3\hat{i} + 4\hat{i} = \hat{i} + 2\hat{j}[/tex]
The displacement will be:
= √[ (1)² + (2)² ]
= √5 m
For (c),
2m east, 4m west, 3m north
Then,
[tex]2\hat{i} - 4\hat{i} + 3\hat{j} = -2\hat{i} + 3\hat{j}[/tex]
The resultant of displacement is:
= √[ (-2)² + (3)² ]
= √[ 4 + 9]
= √13 m
For (d),
3m north, 2m east, 4m west
Then,
[tex]3\hat{j} + 2\hat{i} - 4\hat{i} = -2\hat{i} + 3\hat{j}[/tex]
Then, the resultant of displacement will be:
= √[ (-2)² + (3)² ]
= √[ 4 + 9]
= √13 m
Hence (a), (c), and (d) have the same resultant.
Learn more about displacement here:
https://brainly.com/question/321442
#SPJ9
The complete question is mentioned below:
two or more of the following sets of displacement, when carried out in the order shown, have the same resultant, which are they? (a) 2m east, 3m north, 4m west (b) 2m north, 3m west, 4m east (c) 2m east, 4m west, 3m north (d) 3m north, 2m east, 4m west
Tyler wants to learn about the types of insects in the soil near his house. Which would be a benefit of carrying out a descriptive investigation?
He could collect a large amount of data for a low cost.
He could control most of the variables affecting the insects.
He would get results that might change after the investigation.
He would be able to study cause-and-effect relationships.
Tyler wants to learn about the types of insects in the soil near his house. He could collect a large amount of data for a low cost.
Types of investigation :Descriptive investigation, comparative investigation, and experimental investigation are the three types of investigations that scientists use to research and create explanations for events in nature.
What is the benefit of carrying out a descriptive investigation?Providing descriptions is the aim of descriptive research. It should describe phenomena in a factual, precise, and organized manner without attempting to infer their causes. It does not provide an explanation for the how, when, or reasons why a specific phenomenon occurred.
Methods of investigation :In various situations, scientists employ a variety of investigational techniques. These techniques include fair testing, identifying and classifying, modeling, pattern seeking, and researching (in no particular order). According to research, fair testing dominates science instruction.
To know more about comparative investigation :
https://brainly.com/question/12042816
#SPJ9
Jollibee takes in Php 190,000 in an 8-hour period. Write a direct variation equation for the
relationship between income and number of hours. Estimate how many hours it would take
the restaurant to earn Php 1,000,000.
The direct variation equation is I = kh and it will take 42.1 hours for the restaurant to earn Php 1,000,000.
The direct variation equation has the form y = kx, where k is the constant proportionality. It is a linear equation with two variables.
In an 8-hour period, Jollibee takes in Php 190000.
The direct variation equation is given as y = kx, where y is directly proportional to x.
Hours worked (h) directly affect income (I), where k is the variational constant.
Therefore,
I = k × h
190000 = k × (8)
k = 23750 / 190000
Now, when the restaurant earns Php 1,000,000.
Therefore, using the direct variation equation:
Income = variable constant × number of hours
I = k × h
1,000,000 = (23750) × h
h = 1,000,000 / 23750
h = 42.1 hours
Learn about direct variation equation here:
https://brainly.com/question/28443091
#SPJ9
If the price elasticity of demand for labor is 0.15 and the wage increased from $11 to $16 an hour, what is the predicted decrease in the level of employment in percentage terms?
The predicted decrease in level of employment percentage is calculated as 6.81%
Elasticity of demand for labor = % Change in Demand for Labor/ % Change in wage
Elasticity of demand for labor = 0.15
% Change in wage = (16-11)/11×100 = 45.45%
Elasticity of demand for labor = % Change in Demand for Labor/ % Change in wage
0.15 = % Change in Demand for Labor/45.45%
% Change in Demand for Labor = 45.45%×0.15
= 6.81%
What is price elasticity of demand means?
Price elasticity of demand is that the ratio of the percentage change in quantity demanded of a product to the percentage change in price. Economists employ it to know how supply and demand change when a product's price changes
Why is price elasticity of demand important?
Price elasticity is that the measure of the market's response to price changes. Elasticity is vital to pricing decisions because it helps us understand whether raising prices or lowering prices will enable us to achieve our pricing objectives.
Learn more about price elasticity of demand:
brainly.com/question/5078326
#SPJ4
inside out and upside-down: the roles of gas cooling and dynamical heating in shaping the stellar age-velocity relation
The formation and evolution of discs can be better understood by performing kinematic studies of disc galaxies utilizing specific Milky Way stars or statistical analyses of global disc kinematics across time.
The study of Gas Cooling and Dynamical HeatingOlder stars are kinematically hotter at birth and get hotter as they grow older (the disc settles over time in an “upside-down” formation scenario).
The disc also expands from the inside out, and radial mixing has resulted in the presence of many of the older stars in the current solar neighborhood.
We show that the model used to explain the general decrease in velocity dispersion observed in disc galaxies from z 2-3 to the present day, in which the disc evolves in quasi-stable equilibrium and the ISM velocity dispersion decreases over time due to a decreasing gas fraction, can also be used to explain the evolution of birth in h277.
Our findings connect local measurements of the Milky Way’s AVR with those of high-z disc galaxies’ observed kinematics.
To know more about stellar, visit:
https://brainly.com/question/12790561
#SPJ4
A gas with initial state variables p1, v1, and t1 is cooled in an isochoric process until p2=13p1.part aby what factor does the volume change?
If the volume is held constant, a process is said to be isochoric (or iso-volumetric). The work that the system performs in any isochoric process is always zero.
In thermodynamics, a condition in which a system's volume doesn't change is referred to as an isochoric process. A pressure volume diagram serves as the model for this operation (PV diagram). Consequently, Q1 / Q2 = T1 / T2 or Q1 / Q2 = Q2 / T2 as these two equations are equivalent. The term "lower amount of heat" refers to the proportion of heat to temperature. The total of the reduced amount of heat is therefore zero for the Carnot heat engine. As a result, we can see that in an isochoric process, the volume is constant, and no work is being done. The gas's intrinsic energy is the only thing that changes.
Learn more about isochoric process here-
https://brainly.com/question/13261035
#SPJ4
Hydrogen fusion in the sun requires a temperature (in kelvin) of:_____.
Hydrogen fusion in the sun requires a temperature of more than 100 million kelvin.
so that you can fuse two hydrogen atoms things are required: excessive temperature and excessive pressure. The minimum temperature required to fuse hydrogen is set a hundred million Kelvin, which is set six times the temperature in the middle of our sun.
What temperature does fusion get up inside the sun?
The gravity of the solar, which is sort of 28 times that of Earth, ''traps'' hydrogen from its environment and this hydrogen fuels the Hydrogen fusion reaction. At temperatures of 15 million diploma Celcius within the solar's center, hydrogen gasoline becomes plasma, the fourth country of depend.
Learn more about Hydrogen fusion https://brainly.com/question/12665881
#SPJ4
A satellite in orbit around Earth is in uniform circular motion. What is the angle between the velocity vector and acceleration vector at any given point on the orbit?
A. 90°
B. 45°
C. 180°
D. 0°
The angle between the velocity vector and acceleration vector at any given point in the orbit would be 90 degrees, therefore the correct answer is option A.
What is acceleration?The rate of change of the velocity with respect to time is known as the acceleration of the object. Generally, the unit of acceleration is considered as meter/seconds².
As given in the If a satellite in orbit around Earth is in a uniform circular motion then we have to find the angle between the velocity vector and acceleration vector.
In a uniform circular motion, the angle between the velocity vector and acceleration vector is always π/2.
The angle between the velocity vector and acceleration vector at any given point in the orbit would be 90 degrees.
Thus, the correct answer is option A.
To learn more about acceleration from here, refer to the link ;
https://brainly.com/question/16768483
#SPJ2
Find the caloric content of 100g of fruit salad containing 20g of apple, 25g of strawberry, 15g of grapes, 30g of banana, and 10g of honey.
90 caloric content of 100g of fruit salad containing 20g of apple, 25g of strawberry, 15g of grapes, 30g of banana, and 10g of honey.
energy are the strength that a meals or beverage includes.
On food merchandise, energy are normally noted, and wearables just like the first-class health trackers assist you to hold-song of how many calories you burn even as undertaking numerous sports. greater energy are usually found in positive ingredients, together with those which are fatty, fried, or processed. clean fruit and veggies, as an instance, have fewer calories on average than different foods. Conversely, low-calorie objects like food regimen soda don't have any dietary value while some nutritious culmination and vegetables might have a high-calorie content.Find out more information about Calories.
https://brainly.com/question/22374134?referrer=searchResults
#SPJ4
The half-life of the isotope br3574 is 25.4 minutes. if a 4.0-mg sample is given to a patient, how much of the isotope remains after 90.0 minutes?
half-life of the isotope br3574 is 25.4 minute The amount of isotope remained after 90min = 0.01g
number of periods= time/ half life
= 90/25,=3.6
so at each time 4/3.6=1.1, 1.1/7.2= 0.15 and 0.15/10.8=0.01g
The period of time it takes for one-half of a radioactive isotope to decay is known as the half-life. A given radioactive isotope's half-life is constant; it is unaffected by external factors and independent of the isotope's starting concentration.
or
Half-life is the length of time it takes for a radioactive element to decay to half of its initial value. This suggests that a source's activity has a half-life when it takes time for it to decrease to half its initial value
to learn more about Half-life:
https://brainly.com/question/24710827
#SPJ4
On holiday a family travels from meyerville 10 miles away to sprytown 70 miles away in 3 hours. Find their speed
On holiday a family travels from meyerville 10 miles away to sprytown 70 miles away in 3 hours, their speed is 20 miles per hour.
Equation :To find speed using formula,
s = d / t
s = 70 - 10 / 3
s = 60 / 3
s = 20 miles / hours
Speed :Speed is defined as the rate of change of position; what we mean by speed is the magnitude with which an object moves, or, more scientifically, the rate at which an object changes its position is per unit time.
Speed is calculated as speed = distance / time. To figure out what the units for speed are, you must first understand the units for distance and time. Because distance is measured in metres (m) and time is measured in seconds (s), the units will be metres per second (m/s).
To know more about units :
https://brainly.com/question/23843246
#SPJ9
at the instant the traffic light turns green, a car that has been waiting at an intersection starts ahead with a constant acceleration of 3.20 m/s2 . at the same instant a truck, traveling with a constant speed of 22.0 m/s , overtakes and passes the car.
The distance at which the car meets the truck after the traffic light turns green is at 302.5 m
We know that,
s = ut + 1/2 a[tex]t^{2}[/tex]
v = s / t
where,
s = Distance
u = Initial velocity
t = Time
a = Acceleration
Given that,
The car has with a constant acceleration of 3.2 m / [tex]s^{2}[/tex]
Initial velocity of car = 0
Velocity of truck = 22 m / s
After the traffic signal distance travelled by the car and truck are equal and time taken is also equal.
For the truck,
s = v * t
For the car,
s = ut + 1/2 a[tex]t^{2}[/tex]
vt = ut + 1/2 a[tex]t^{2}[/tex]
22 * t = 0 + 1/2 * 3.2 * [tex]t^{2}[/tex]
t = 13.75 s
s = v * t = 22 * 13.75
s = 302.5 m
Velocity is the distance travelled by an object with respect to time. It is denoted by V.
Therefore, the distance at which the car meets the truck after the traffic light turns green is at 302.5 m
The given question is incomplete. The complete question is
At the instant the traffic light turns green, a car that has been waiting at an intersection starts ahead with a constant acceleration of 3.20 m/[tex]s^{2}[/tex] . at the same instant a truck, traveling with a constant speed of 22.0 m/s , overtakes and passes the car. How far beyond the traffic signal will the car overtake the truck?
To know more about Velocity
https://brainly.com/question/18084516
#SPJ4
Why does the total amount of energy before and after
any energy transformations remain the same?
Answer:
Energy cannot be created or destroyed
The total amount of energy remains the same even though it may change forms. The amount of energy before and after any energy transformations remain the same because energy cannot be created or destroyed.
Explanation:
What steps could the company take to help ensure that electric engines become the dominant design?
Drive defensively. Simply said, aggressive driving accelerates the rate of battery drain in your electric vehicle.
Speed up. When feasible, try to maintain your speed under 60 mph.
What are electric engines ?An electric motor is a mechanical device that converts electrical energy into mechanical energy. The majority of electric motors function by producing torque that is applied to the motor shaft through the interaction of the motor's magnetic field and the electric current flowing through a wire winding.
Drive defensively. Simply said, aggressive driving accelerates the rate of battery drain in your electric vehicle.Hurry up. Whenever possible, aim to maintain a speed of less than 60 mph.Make the most of regenerative braking.Don't be too hot.Cool Off With The AC.Tend To Get TiredKeep it Light.Remain Slick.to learn more about electric engines go to -
https://brainly.com/question/1049516
#SPJ4
A body is thrown upwards vertically with a velocity of 60m/s. Calculate it’s velocity the height attained after 3 seconds the maximum height attained
The velocity of the body will be 30.6 m/s.
The object's highest vertical point during its trajectory is at its maximum height. Before it reaches the highest point, the item is flying upward; once it reaches that point, it is falling.
The velocity of the body is 60 m/s when thrown vertically upwards.
The maximum height attained by the body after 3 seconds.
Then, the initial velocity of the body is :
u = 60 m/s
t = 3 seconds
Then, using the equation of motion:
v = u - gt , the negative sign indicates that the body is moving opposite to gravity.
Therefore,
v = 60 - (9.8)(3)
v = 60 - 29.4
v = 30.6 m/s
Hence, the final velocity of the body when thrown upwards before it comes to stop is 30.6 m/s.
Learn more about velocity here:
https://brainly.com/question/80295?source=archive
#SPJ9
a bicyclist traveled from 15.6 m/s to 21.1 m/s over a distance of 30 meters
a) what is the acceleration of the bicyclist?
b) How much time does it take the bicyclist to travel the 30 meters
The acceleration of the bicyclist is 3.35 m / s². It takes the bicyclist 1.64 s to travel the 30 meters
We know that,
a = ( v - u ) / t
s = ut + 1 / 2 at²
where,
a = Acceleration
v = Final velocity
u = Initial velocity
t = Time taken
s = Distance travelled
Given that,
u = 15.6 m / s
v = 21.1 m / s
s = 30 m
a = ( 21.1 - 15.6 ) / t = 5.5 / t
s = ut + 1 / 2 at²
30 = 15.6 t + 1 / 2 ( 5.5 t )
30 = 15.6 t + 2.75 t
t = 30 / 18.35
t = 1.64 s
a = 5.5 / t = 5.5 / 1.64
a = 3.35 m / s²
Equations of motion are used to describe the position of an object using the motion of the object with respect to time. It is done using speed, acceleration, distance and time.
Therefore,
a) The acceleration of the bicyclist is 3.35 m / s²
b) Time taken by the bicyclist =
To know more about Equations of motion
https://brainly.com/question/14355103
#SPJ1
Person of weight 80 kg jumped off a platform of height 1 m and safely landed on their feet. what is the magnitude of the momentum change during the collision?
The momentum change is 125440 kg.m/s.
We need to know about momentum to solve this problem. Momentum can be defined as the degree of difficulty to stop a moving object. It can be determined by
P = m . v
where P is momentum, m is mass and v is velocity.
Momentum also can be defined by kinetic energy
KE = 1/2 . m . v²
KE = P² / 2m
where KE is kinetic energy
From the question above, we know that:
m = 80 kg
h = 1 m
g = 9.8 m/s²
By conservation of energy, the initial kinetic energy is zero because of the person is in static condition. Hence, the initial momentum is
KEo = Po² / 2m
Po = 0 kgm/s
After the jump, the person will have maximum kinetic energy before landing which can be written
KE = PE
P² / 2m = m . g . h
P² = 2m² . 9.8 . 1
P² = 2.80² . 9.8 . 1
P² = 125440 kg.m/s
The momentum change is
ΔP = P - Po
ΔP = 125440 - 0
ΔP = 125440 kgm/s
Find more on momentum at: brainly.com/question/25121535
#SPJ4
calculate the power output (in watts) during 1 minute of exercise on the cycle ergometer, given the following
The power output would be 981 watts.
SolutionMetered energy for one metering interval, measured in kWh per meter in interval, multiplied by the number of metering intervals in an hour equals power output.
The average rate of electric energy delivery during the course of one metering interval, expressed as an hourly rate of delivery in kWh, is the outcome.
The maximum power, stated in kW, that a charging station, pool, or shore-side energy supply system is theoretically capable of giving to a linked car or vessel is the installation’s “power output.”
What are energy and work?Work is the process of transferring energy into an object to move it in some way.
Energy is the term used to describe the capacity to accomplish tasks. Acted upon
Calculation60 kg x 9.81 = 588.6N
100m/min = 5/3 m/s
Power= v.w
= 588.6 x 5/3
=981 watts
To know more about power output, visit:
https://brainly.com/question/14818189
#SPJ4
Please in complete sentences I already did the first slide but i put it there so you can i have an idea about what its asking
Answer:
The prospect of giving a presentation fills some people with dread, while others relish the experience. However you feel, presenting your work to an audience is a vital part of professional life for researchers and academics. Presentations are a great way to speak directly to people who are interested in your field of study, to gather ideas to push your projects forward, and to make valuable personal connections.
a ball is thrown directly downward with an initial speed of 8.35 m/s from a height of 29.6 m. after what time interval does it strike the gro
A ball is thrown directly downward with an initial speed of 8.35 m/s from a height of 29.6 m is 2.59s
What is speed?Speed is the time rate at which an object is moving along the path, while the velocity is the rate and direction of an object’s movement. Put the another way, speed is a scalar value, while the velocity is a vector.
The mathematical calculation for the speed is relatively straightforward, wherein the average speed of an object is calculated by dividing the distance traveled by the time it took the object to travel the distance. Velocity, on other hand, is more complicated mathematically and can be calculated in different ways, depending on what information is available about the object’s motion. In its simplest form, the average velocity is calculated by dividing change in position (Δr) by change in time (Δt)
a ball is thrown directly downward with an initial speed of 8.35 m/s from a height of 29.6 m. The equation for the height of the ball as a function of time is
y f =y i +v i -1/2g[tex]t^{2}[/tex]
0=29.6+(-8.35)-4.90[tex]t^{2}[/tex]
Solving for t,
t=[tex](+8.35± \sqrt{(-8.35)^{2}-4(-4.90(29.6)}) /2(-4.90)= (+8.35± \sqrt{69.72-580.16})/(-2.9)[/tex]
t=2.59s
To know more about velocity visit: https://brainly.com/question/18084516
#SPJ4
What’s an example of potential energy? I WILL CROWN YOU PLS HELP
A
Water behind a dam
B
A dart stuck in a dartboard
C
Plants using photosynthesis
D
A cow chewing grass
A. Water behind a dam an example of potential energy
What are some illustrations of kinetic and potential energy?The energy an individual or an item has as a result of motion—in this case, the motion of the falling apple—is known as kinetic energy. Potential energy, which exists in a bike that is parked on top of a hill, is converted to kinetic energy when you start riding it downhill.
Kinetic energy may be observed in anything that moves around the house. This might happen when a glass breaks after falling off the counter, a fan circulates air on a warm day, or a cue ball rolls on a pool table. Kinetic energy is used by on-turning electrical equipment as well as by individuals moving around the house.
Learn more about Kinetic energy refer
https://brainly.com/question/25959744
#SPJ9
drivers must slow down from 60 to 40 mph to negotiate a severe curve on a rural highway. a warning sign for the curve is clearly visible for a distance of 200’. how far in advance of the curve must the sign be located in order to ensure that vehicles have sufficient distance to safely decelerate? use the standard reaction time and deceleration rate recommended by aashto for basic braking maneuvers.
The sign needs to be placed 292.07 feet in advance of the curve in order to provide cars enough room to safely slow down.
Prior to putting up a sign board to slow down traffic, we first calculate the distance.
d is the safe stopping distance, Si is the initial speed (60 mph), t is the time reaction (2.5 seconds), Sf is the end speed (40 mph), and G is the grade (0).
Therefore, we replace d = (1.47 60 2.5) + [(602 - 402) / 30(0.348 0) = 220.5 + (2000/10.44) = 220.5 + 191.57 = 412.07 ft Now that we know that a warning sign is clearly visible at a distance of 120 ft, the ideal safe distance will be d = minimum distance - sign visible distance d = 412.07 ft.
d = 412.07 - 120
d = 292.07 ft
In order to ensure that vehicles have enough room to safely slow down, the sign must be placed 292.07 feet ahead of the bend.
Learn more about distance here-
https://brainly.com/question/15172156
#SPJ4
a 60kg person walks from the ground to the roof of a 80m tall building. what is the person's potential energy once they get to the top?
The potential energy is 47040 joules.
We need to know about potential energy to solve this problem. The potential energy is the object's energy caused by its position. Potential energy can be determined as
PE = m . g . h
where PE is potential energy, m is mass, g is the gravitational acceleration (9.8 m/s²) and h is height.
From the question above, we know that
m = 60 kg
h = 80 m
By substituting the given parameters, we can calculate the potential energy
PE = m . g . h
PE = 60 . 9.8 . 80
PE = 47040 joules
Hence, the potential energy is 47040 joules.
Find more on potential energy at: https://brainly.com/question/1242059
#SPJ4
What is the minimum diameter of a steel wire if it is to support a mass of 80 kg?
The minimum diameter of a steel wire if it is to support a mass of 80 kg is 1.41 * 10⁻³ m.
What will be the minimum diameter of a steel wire if it is to support a mass of 80 kg?The minimum diameter, d of the steel wire can be calculated thus:
Stress, α = Force/areaα = 5.0 × 10⁸ Pa.
mass, m = 80 kg
Force = 80 * 98 = 784 N
Area = force/α
area = 784/5.0 × 10⁸
area = 1.57 * 10⁻⁶
Area = πd²/4
d = √(4 * area/π)
d = √(4 * 1.57 * 10⁻⁶ * 7/22)
diameter = 1.41 * 10⁻³ m
Learn more about elastic limit at: https://brainly.com/question/18793028
#SPJ1
Note that the complete question is given below:
What is the minimum diameter of a steel wire if it is to support a mass of 80 kg? The elastic limit of steel is 5.0 × 10⁸ Pa.
Select all of the following that are vector quantities.
A acceleration
B. force
C. mass
D. speed
E. velocity
F. volume
What is the total distance traveled of the object in the graph? Thank you! (:
The brakes are applied to a moving vehicle, causing it to uniformly slow down. While slowing, it moves a distance of 40.0 m in 7.45 s to a final velocity of 1.50 m/s, at which point the brakes are released.
What was its initial speed (in m/s), just before the brakes were applied?
What was its acceleration (in m/s2) while the brakes were applied? (Assume the initial direction of motion is the positive direction. Indicate the direction with the sign of your answer.)
The acceleration is 1.03m/s^2 and initial velocity is 6.1735m/s
As it is given that motion is in positive direction and in one dimension, we will use the formulas of motion in one dimension
It is given to us that while slowing vehicle moves 40m
time taken to halt is 7.45s
final velocity is 1.5 m/s
We are required to find initial speed and acceleration
Using the equation v = u + at
v=1.5 , t = 7.45
1.5 = u + a x 7.45
u + 7.45a= 1.5
u =1.5 -7.45a
Now using the equation v^2 -u^2 =2aS
1.5 x 1.5 -u^2 = 2 x a x 40
2.25 - u^2 = 80a`
2.25- 80a = u^2
Now squaring for u in first equation and equation with second ,we get:
(1.5 -7.45 a)^2 = 2.25 -80a
2.25 + 55.50a^2 -22.35a =2.25 -80a
55.5a^2+57.65 a =0
a(55.5a +57.65)=0
a= 57.65 /55.5 =1.03 m/s^2
u = 1.5 - 7.45 x 1.03
=-6.1735 m/s
negative sign implies that initial speed is in opposite direction
#SPJ9
Use the drop-down menus to answer the questions.
If two vectors are perpendicular to each other, how should you add them?
If two vectors are not perpendicular to each other, how should you add them?
Addition of vectors can be done using the Pythagorean theorem for perpendicular vectors and the Parallelogram law of vector addition for non-perpendicular vectors.
The head of the first vector must meet the tail of the second vector in order for the two vectors to be added together, according to the triangle law of vector addition. We may thus acquire the resulting sum vector by connecting the head of the second vector to the tail of the first vector.
Addition of vectors which are perpendicular is done using the Pythagorean theorem,
[tex]C^2 = A^2 + B^2\\C = \sqrt{A^2 + B^2}[/tex]
Addition of vectors not perpendicular to each other is done using the Parallelogram law of vector addition:
[tex]R = \sqrt{A^2 + B^2 + 2AB cos\theta}[/tex]
Learn more about Addition of vectors here:
https://brainly.com/question/26056717
#SPJ9
I really need help how dono do this
Answer:
As mentioned before middle thing nucleus and blue things with +1 charge (positive) [I am talking about the key] are protons anything else that you need help with?
he atmosphere exerts a pressure of 14.7 lbf/in.2 on top of the 6-in.-diameter piston. the absolute pressure of the air inside the cylinder is 16 lbf/in.2 the local acceleration of gravity is g
The absolute pressure of the air inside the cylinder is 16 lbf/in
1.3psig.
A straightforward idea is pressure—the measurement of force in a certain space.
There are several approaches of comprehending the strain, nevertheless, depending on the query.
Here are some tips for differentiating pressure measurement types and units when describing when and why such pressure measurements are employed.
Calculate the mass of the piston by applying the equilibrium condition.
∑F_y=0
p_(air)A_(piston)- p_(atm)A_(piston)-m_(piston)g=0
(p_(air)-p_(atm))A_(piston)-m_(piston)g=0
m_(piston)=(p_(air)-p_(atm))A_(piston)/g ______(1)
Calculate the area of the piston,
A_piston= πD^2/4
=π×D^2/4
=π×6^2/4
=28.274 in^2
By substituting the value in m_(piston)=(p_(air)-p_(atm))A_(piston)/g
=(16.14.7 lbf/in.^2)(28.274 in.^2)/32.2 ft/s^2(32.2 ft/s^2/1lbf)
=36.756 lbm
b)
Calculate the gage pressure if the air,
p_(gage) = p_(abs)-p_(atm)
p_(gage)=16-14.7
=1.3psig
To learn more about atmosphere exerts a pressure refer the link:
https://brainly.com/question/13927530
#SPJ9