You have to find voltage first.
1000×8= 8000V
Then you use the formula P=IV
P=(8)(8000)
P=64,000 Watts
I think this is right
How can we make a simple energy flow diagram to show the heat transfer between animals, heat lamps and environment?
Answer:
Remember a few key things:
1.) Oil comes from plants, but also animals
2.) When heat lamps are done or useless, they go to landfills
3.) Things in landfills go back to the environment after a few years or even decades.
4.) Sometimes there are all-natural oils for heat lamps
The work done in moving a block across a rough surface and the heat energy gained by the block can both be measured in ...
The work done in moving a block across a rough surface and the heat energy gained by the block can both be measured in Joules.
What are Joules?Joules is a unit of measurement used in physics that indicates the force exerted on a particular object.
A Joule is a work when a force that equals one (1) newton moves an object one (1) meter in a given direction.
Joules is the most widely extended unit of force and energy in physics and related disciplines.
Learn more about Joules here:
https://brainly.com/question/490326
1. manganese dioxide is used in dey cell . ( Give reason)
2. Fuses are used in a circuit. ( Give reason )
Answer:
1.In dry cells, manganese dioxide acts as a ‘depolariser'.
In the depolarization process, the depolariser is used to remove hydrogen and doesn't allow the voltage to get reduced due to polarisation of the cell . Manganese oxide was used as a depolariser in Leclanché cell .
In zinc-carbon dry cell, the manganese dioxide takes in electrons as it is converted to Manganese III oxide (Mn2O3)
2.The fuse breaks the circuit if a fault in an appliance causes too much current flow. This protects the wiring and the appliance if something goes wrong. The fuse contains a piece of wire that melts easily. If the current going through the fuse is too great, the wire heats up until it melts and breaks the circuit.
how many joules are there in 200kj
Answer:
200,000 joules <3
Explanation:
just accept it
Answer:
[tex]2.00 * 10^5J[/tex]
Explanation:
Make use of your conversion factors:
[tex]200KJ * \frac{1000J}{1kJ} = 200,000J = 2.00* 10 ^5J[/tex]
Or alternatively make use of your scientific notation. [tex]kilo = 10^3[/tex]
Therefore [tex]200kJ = 200*10^3J=2.0*10^2*10^3J = 2.0*10^5J[/tex]
Why do you only see one side of the moon? Lesson 3. 05 Question 12 options:
A:The moon only has one side
B:The rotational period is greater than to the period of revolution for the moon
C: The rotational period is equal to the period of revolution for the moon
D:The rotational period is less than the period of revolution for the moon
Answer:
The Moon orbits Earth once every 27.3 days and spins on its axis once every 27.3 days. This means that although the Moon is rotating, it always keeps one face toward us. Known as “synchronous rotation,” this is why we only ever see the Moon's nearside from Earth.
I hope this helps you out
The three fundamental colors of visible light are red, green and blue. Why does a yellow T-shirt appear yellow to you
This one is leisure for people with common sense. Yellow is an assortment of two of the rudimentary colors, red and green. Yellow appears yellow because red light is being imaged in our eyes, so that's one thing. Green reflections are capable of being enthralled by the shirt; hopefully, this should be meticulous adequate for you to have a basic understanding of this "phenomenon". Cheers!
A yellow T-shirt appear yellow to human eye because it reflects both red and green lights and our eye detects it as a combination of two fundamental colors (red and green), which is yellow.
What is color?Color is a perception. Our eyes sense something (the sky, for instance), and information is transferred from our eyes to our brains informing us that it is a particular color (blue). Different combinations of wavelengths of light are reflected by objects. When our brains detect certain wavelength combinations, they transform them into the phenomena known as color.
There has three fundamental color: red, blue and green. Red and green lights are combined to create yellow light. If a shirt reflects both red and green light, it appears yellow to human eyes. These two fundamental colors of light must be present in the incident light for red and green light to reflect yellow light to human mind.
Learn more about color here:
https://brainly.com/question/13552152
#SPJ5
A small car with mass of 0.800 kg travels at a constant speed
on the inside of a track that is a vertical circle with radius 5.00
m. If the normal force exerted by the track on the car when it
is at the bottom of the track is 25 N,
a) What is the normal force on the car when it is at the (i)
top, (ii) rightmost and (iii) leftmost point of the track?
b) What is the speed of the car as it travels around the
vertical circle?
Answer:
The equation of equilibrium at the top of the vertical circle is:
\Sigma F = - N - m\cdot g = - m \cdot \frac{v^{2}}{R}
The speed experimented by the car is:
\frac{N}{m}+g=\frac{v^{2}}{R}
v = \sqrt{R\cdot (\frac{N}{m}+g) }
v = \sqrt{(5\,m)\cdot (\frac{6\,N}{0.8\,kg} +9.807\,\frac{kg}{m^{2}} )}
v\approx 9.302\,\frac{m}{s}
The equation of equilibrium at the bottom of the vertical circle is:
\Sigma F = N - m\cdot g = m \cdot \frac{v^{2}}{R}
The normal force on the car when it is at the bottom of the track is:
N=m\cdot (\frac{v^{2}}{R}+g )
N = (0.8\,kg)\cdot \left(\frac{(9.302\,\frac{m}{s} )^{2}}{5\,m}+ 9.807\,\frac{m}{s^{2}} \right)
N=21.690\,N
What are Two methods of producing A.C Electricity ?
Answer:
hydropower and nucear energy
Explanation:
Examples of these include hydropower, fossil fuel-based power, nuclear energy, and solar thermal power plants, among others. Almost all major power plants generate alternating current, as do diesel generators
If a FM radio station broadcasts at 80. 3 MHz (megahertz), what is its wavelength in m (speed of light 3. 0 x 108 m/s)
Answer:
Wavelength = 3.74 m
Explanation:
In order to find wavelength in "metres", we must first convert megahertz to hertz.
1 MHz = 1 × 10⁶ Hz
80.3 Mhz = x
x = 80.3 × 1 × 10⁶ = 8.03 × 10⁷ Hz
The formula between wave speed, frequency and wavelength is:
v = fλ [where v is wave speed, f is frequency and λ is wavelength]
Reorganise the equation and make λ the subject.
λ = v ÷ f
λ = (3 × 10⁸) ÷ (8.03 × 10⁷)
λ = 3.74 m [rounded to 3 significant figures]
How much force would you need to cause a 20-kilogram object to accelerate in a straight line to 20 m/s2?
Answer:
400N
Explanation:
Newton's second law of motion
F = ma
20 x 20 = F
F = 400
A man tries to push a 200 kg Car that moves at a acceleration 0.50 m/s2. The man is able to displace the car 10 m. How much work did he do?
The work done by the man pushing the car over the given distance is 1000J.
Given the data in the question;
Mass of car; [tex]m = 200kg[/tex]Acceleration of the car; [tex]a = 0.5m/s^2[/tex]Distance covered by the car; [tex]d = 10m[/tex]Work done; [tex]W = \ ?[/tex]
Work done is simply defined as the energy transfer that takes place when an object is either pushed or pulled over a certain distance by an external force. It is expressed as;
[tex]Work\ done = f * d[/tex]
Where f is force applied and d is distance travelled.
To determine the work done by the man, we first solve for the force applied F.
From Newton's Second Law; [tex]Force \ F = m * a[/tex]
We substitute our given values into the expression
[tex]F = m * a \\\\F = 200kg * 0.5m/s^2\\\\F = 100kg.m/s^2[/tex]
Next we substitute our values into the expression of work done above.
[tex]Work \ done = f * d\\\\Work \ done = 100kg.m/s^2 * 10m\\\\Work \ done = 1000kgm^2/s^2\\\\Work \ done = 1000J[/tex]
Therefore, the work done by the man pushing the car over the given distance is 1000J.
Learn more about work done: https://brainly.com/question/26115962
What kind of model is this?
A. Experimental model
O B. Mathematical model
O C. Computer model
o
D. Physical model
Answer:
I think it's Experimental
Explanation:
it has atoms on it.
Answer:
D
Explanation:
It is a physical model.
Why does the spectroscopic parallax method only work for main sequence stars?.
Answer:
Only main sequence stars have a well-defined relationship between spectral type and luminosity.
Explanation:
Low-mass stars have much longer lifetimes than high-mass stars.
The reflection of a 10. 0 cm object appears to be 18 cm tall and 9 cm behind the mirror. What distance is the object from the mirror? cm.
The distance is the object from the mirror will be 5cm.
What is a mirror equation?A mirror equation is an equation that relates object distance and image distance to focal length. It is often referred to as a mirror formula.
The object distance in a spherical mirror is the distance between the object and the pole of the mirror (u).
The given data in the problem is;
Image height = 18cm
Object height = 10cm
u is the object distance
v is the image distance = 9 cm
From the symmetry of the triangle;
[tex]\frac{image \ height }{object \ height} = \frac{v}{u} \\\\ \frac{18 }{10} = \frac{9}{u}\\\\ \rm u=\frac{90}{8} \\\\ u = 5\ cm[/tex],
Hence the distance is the object from the mirror will be 5cm.
To learn more about the mirror equation refer to the link;
https://brainly.com/question/3229491
A body of mass 5kg is ejected vertically from the ground when a force of 600N acts on it for 0.1s. Calculate the velocity with which the body leaves the ground.
Assuming g=10N
upward force=600N(applied force)
downward force=(W)=(5x10)=50N
net force=600-50
=550N
F=(delta)P/t
(delta)P=m (v-u)
u=0m/s
(delta)P=mv
550=(5)(v)/0.1
550x0.1
55=5v
v=11m/s
there was no mention of any gravity acting on the object only applied force ,infact we aren't even given the constant
so many assumptions have been made whyyyyyyy!!!
what's your take on it scientists
What happens when light waves strike a mirror? question 5 options: most of the light waves are refracted. most of the light waves are absorbed. most of the light waves are scattered. most of the light waves are reflected.
Answer: "Most of the light waves are reflected", might be the correct answer.
Explanation: it might be the correct answer because the light waves spread out from the source in all directions, and upon striking a mirror, are reflected at an angle determined by the angle at which the light arrives. The reflection process inverts each wave back-to-front, which is why a reverse image is observed.
Answer:
most light waves are reflected
explanation:
when light hits a mirror it bounces back at the same angle it hit this is called reflection refraction on the other hand Refraction is the bending of light
Image result for what is refraction of light
Refraction is the bending of light
Please help me
Think about a time when you walked down an empty hallway
and heard the echo of your footsteps. Write what you think
caused the echo.
Answer:
Explanation:
There are a few conditions as mentioned: "you walked down an empty hallway and heard the echo of your footsteps." So first thing is as you walk, your shoes touch the floor and make noises. Those are sounds of your footsteps. You are in a hallway so the sounds are trapped within the hallway. It is empty so there is nothing like people who would block and absorb the sounds. With sounds bouncing around walls and floor of the hallway, they bounce back to the source: you. That is when you hear the echo of your footsteps.
What is average acceleration? How does acceleration occur?
Average acceleration is the change in velocity with time.
Acceleration takes place when velocity changes with time. Velocity being a vector quantity may change in magnitude or direction any of the change results to acceleration
The pace at which a body's velocity varies is represented by average acceleration, which is a vector quantity.
What is average acceleration?The rate of change of velocity with respect to time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.
The formula for acceleration is;
[tex]\rm a = \frac{v-u}{t}[/tex]
u is the initial speed
v is the final speed
t is the time interval
a is the acceleration of ball
To learn more about average acceleration refer to the link;
https://brainly.com/question/17352997
#SPJ4
What happens when red, blue, and green light come together?
Answer:
I believe if red, blue, and green light come together it would produce White light.
Answer:
you get a light white
Explanation:
dont use me for points please i need help, (circuits for physics)
Answer:
B, A, A, B
Explanation:
Just trust me on this one.
Calculate the range of wavelengths that are received by the radio in a car. Suppose that the range of frequencies of FM radio is 88.0 MHz to 108 MHz.
The range of wavelengths that are received by the car radio are 2.78 m to 3.41 m.
To find the range of wavelengths, we use the equation for the speed of a wave
Speed of a waveThe speed of a wave v = fλ where
f = frequency and λ = wavelengthWhat is Wavelength?This is the distance a wave travels in one cycle of the wave.
Making λ subject of the formula, we have
λ = v/f
Given that the range of frequencies of FM radio is 88.0 MHz to 108 MHz and
v = speed of electromagnetic wave = 3 × 10⁸ m/s, f' = lowest frequency = 88.0 MHz = 88.0 × 10⁶ Hz and f" = highest frequency = 108 MHz = 108 × 10⁶ HzThe longest wavelength, λ'λ' = v/f'
= 3 × 10⁸ m/s ÷ 88.0 × 10⁶ Hz
= 0.0341 × 10² m
= 3.41 m
The shortest wavelength, λ"λ" = v/f"
= 3 × 10⁸ m/s ÷ 108 × 10⁶ Hz
= 0.0278 × 10² m
= 2.78 m
So, the range of wavelengths that are received by the car radio are 2.78 m to 3.41 m.
Learn more about wavelength here:
https://brainly.com/question/26637292
best answer gets brainliest
Answer:
a because they are bigger and have more mass wich means that they will fall faster because there is more weight going downward...
Explanation:
Beluga
Answer:
Explanation:
It depends on whether this is a "trick" question.
The law of universal gravitation says that the attractive force between two objects depends directly on their masses and inversely to the square of distance in between them.
As the objects in A are bigger than B, they MAY have higher masses. So the force is larger in A.
But no information is given about object mass or density. The distance between objects in B is shorter. So if the objects in B have the same masses those in A, then the force is larger in B.
In general, which of the following is not a critical skill for participating in a sport? a. agility and balance b. endurance and muscle control c. hand-eye coordination and acuity d. none of the above please select the best answer from the choices provided. a b c d
Option D is not a critical skill for participating in a sport.
What are sports?Sport refers to any competitive physical activity or game[1] that intends to utilize, maintain, or enhance physical ability and skills while also giving enjoyment to players and, in certain situations, entertainment to spectators.
Agility and balance are crucial in sports such as soccer, especially when players dribble the ball at rapid speeds.
Endurance and muscular control are critical in sports such as gymnastics and boxing.
Hand-eye coordination and acuity are essential in sports like golf.
Hence Option D is not a critical skill for participating in a sport.
To learn more about the sports refer to the link;
https://brainly.com/question/4252951
Answer:
D
Explanation
Which statement describes the force diagram? the forces are balanced. the box will move to the right. the box will move to the left. the forces are unbalanced.
The answer will be A The forces are balanced. Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction.
what is force?Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.
The length of each arrow represents the magnitude of each force, while the direction of each arrow represents the direction of each force.
From the diagram, we see that the four arrows have all same length: this means that the four forces have same magnitude, therefore they are balanced in pair. In fact:
On the vertical direction, the normal reaction ([tex]F_N[/tex]) balances the weight of the box ([tex]F_g[/tex])
On the horizontal direction, the push ([tex]F_P[/tex]) balances the force of friction ([tex]F_f[/tex])
Hence the answer will be A. the forces are balanced.
To know more about Force follow
https://brainly.com/question/25239010
Answer:
A is your answer.
Explanation:
Good luck on your exam!
Read the following statements, and then select ALL true statements about light.
Light travels in waves
Visible light is part of the
electromagnetic spectrum
Light travels in straight lines
Light is a form of energy
Read the following statements, and then select ALL true statements about light.
Light travels in waves
Visible light is part of the electromagnetic spectrum
Light travels in straight lines
Light is a form of energy
Light travels in straight lines
Light is a form of energy.
Light travels in waves.
What is current of 12 ohm? help me pleasee
1. 0.25 A
2. 0.5 A
3. 1 A
4. 1.5 A
5. 2 A
Answer:
the current of 12 ohm is 2A
Calculate the average force with which the Sun pulls the Earth. It will help to know
that rsun_Earth = 9.4E9 m.
Answer:
7.9 x 10^21 pound-force
Explanation:
The average distance between the Earth and sun is 150 trillion meters, or 1.5 x 10^11 meters. The mass of the sun is 1.99 x 10^30 kilograms, while the Earth weighs in at 6.0 x 10^24 kilograms. The gravitational constant is 6.67 x 10^-11 meter^3 / (kilogram - second^2). So the Earth and sun pull on each other with a force equal to 3.52 x 10^22 newtons. The newton is a unit of force equal to a kilogram-meter/second^2. One newton is equal to 0.22 of the rarely used English unit called pound-force, so 3.52 x 10^22 newtons is 7.9 x 10^21 pound-force.
What is the definition of the word PER?
Answer:
Per is a Latin preposition that means "through" or "by means of". Per (pronounced like "purr") is also an English preposition that can mean "for each", "to each", "by means of", or [lastly, annoyingly] "in accordance with"; somewhat interchangeably with the [even more annoying] "as per". In the example expressions here, it conveys "because of the rationale presented at/by".
Answer:
(Entry 1 of 4) 1 : by the means or agency of : through per bearer. 2 : with respect to every member of a specified group : for each. 3 : according to —often used with as per instructionsas per usual.
Explanation:
While playing basketball in PE class, Logan lost his balance after making a lay-up and colliding with another student standing behind the basket. His 74-kg body decelerated from 7.6 m/s to 0 m/s, causing the 81-kg student to accelerate from 0 m/s. What is the final velocity of the other student?
PLEASE HELP
The final velocity of the other student after the elastic collision with Logan is 6.94 m/s.
Conservation of linear momentum
The final velocity of the other student will be determined by applying the principle of conservation of linear momentum for elastic collision.
let u represent initial velocitylet v represent final velocitym₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Substitute the given parameters and solve for final velocity of the other stsudent.
74(7.6) + 81(0) = 74(0) + 81(v₂)
562.4 = 81v₂
v₂ = 562.4/81
v₂ = 6.94 m/s
Thus, the final velocity of the other student after the elastic collision with Logan is 6.94 m/s.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
An object is 4 cm in front of a converging lens with a focal length of 12 cm
Answer:
what is your question
Explanation:
I dont see where you are asking a question be specific lol
: )