Answer:
0.124 M.
Explanation:
What is given?
Volume 1 (V1) = 239 mL,
Concentration 1 (C1) = 0.274 M,
Volume 2 (V2) = 239 mL + 288 mL = 527 mL.
What do we need? Concentration 2 (C2).
Step-by-step solution:
To solve this problem, we have to use the following formula:
[tex]C_1V_1=C_2V_2.[/tex]Where the initial concentration (C) and volume (V) are represented with subindex 1, and the final concentration and volume are represented with subindex 2.
The problem is telling us that we are adding 288 mL of water to 239 mL, so the final volume is the sum of these two volumes, i.e., 527 mL.
As we want to find the final concentration, C2, we just have to solve for this unknown value and replace the values that we have, like this:
[tex]\begin{gathered} C_2=\frac{C_1V_1}{V_2}, \\ \\ C_2=\frac{0.274\text{ M}\cdot239\text{ mL}}{527\text{ mL}}, \\ \\ C_2=0.124\text{ M.} \end{gathered}[/tex]The answer would be that the final concentration of the solution is 0.124 M.
After conditions changed to a volume of a sample of helium at 15.56 mL, 138.7°C and 334.6 kPa. What was its initial volyme at 63.2 °C and 57.3 kPa?O a. 74.2O b. 41.4O c. 2.18O d. 111
Answer
a. 74.2
Explanation
Given that:
The initial temperature, T₁ = 63.2 °C + 273 = 336.2 K
Initial pressure, P₁ = 57.3 kPa
The final volume, V₂ = 15.56 mL
Final temperature, T₂ = 138.7°C + 273 = 411.7 K
Final pressure, P₂ = 334.6 kPa
What to find:
The initial volume, V₁.
Step-by-step solution:
The initial volume, V₁ can be calculated using the combined gas law equation.
[tex]\begin{gathered} \frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2} \\ \\ V_1=\frac{P_2V_2T_1}{P_1T_2}=\frac{334.6kPa\times15.56mL\times336.2K}{57.3kPa\times411.7K} \\ \\ V_1=\frac{1750383.611\text{ }mL}{23590.41}=74.2\text{ }mL \end{gathered}[/tex]Hence, its initial volume at 63.2 °C and 57.3 kPa is 74.2 mL
The total number of calcium atoms in the expression 3 cal 2 shown in the equation 3CaCl 2 +2Na 3 PO 4 Ca(PO 4 ) 2 +6 NaCl is:
Let's write the balanced chemical equation:
[tex]3CaCl_2+2Na_3PO_4\to Ca_3(PO_4)_2+6NaCl.[/tex]You can see that in the reactants and in the products we have the same number of atoms for each element. This is due to the matter of conservation law.
The total number of calcium atoms that are reacting and produced in the reaction is 3.
How to balance ____CaCl2 —-> ____Ca+ ____ Cl
In order to properly balance an equation, we need to make sure that the same amount of elements on the reactants side matches the number of elements on the products side, we can do that by increasing the number in front of each molecule, the so called stoichiometric coefficient. In the reaction from the question we can properly balance by adding the following stoichiometric coefficients
For this question we have:
CaCl2 -> Ca + 2 Cl
7. A given sample of gas is held in a container with the volume of 6.02 L with a temperature of 59.5℃ at a pressure of 1.20 atm. What is the final pressure when the sample of gas is administered to a new volume of 10.0 L at 20.2℃?
The final pressure of the sample gas based on the new volume and temperature would be 0.245 atm.
Combined gas lawThe combined gas law is expressed as:
[tex]\frac{p_1v_1}{t_1}[/tex] = [tex]\frac{p_2v_2}{t_2}[/tex]
Where
[tex]p_1[/tex]= initial pressure[tex]v_1[/tex]= initial volume[tex]t_1[/tex]= initial temperature[tex]p_2[/tex]= final pressure[tex]v_2[/tex]= final volume[tex]t_2[/tex]= final temperatureIn this case, we were given all the variables except the final pressure, [tex]p_2[/tex]:
[tex]p_1[/tex]= 1.20 atm[tex]v_1[/tex]= 6.02 L[tex]t_1[/tex]= 59.5℃[tex]v_2[/tex]= 10.0 L[tex]t_2[/tex]= 20.2℃Making p2 the subject of the formula in the combined gas equation, we have:
[tex]p_2[/tex]= [tex]p_1v_1t_2/t_1v_2[/tex]
Next, let's substitute the given variables:
[tex]p_2[/tex]= 1.2 x 6.02 x 20.2/59.5 x 10.0
= 145.9248/595
= 0.245 atm
In other words, the final pressure when the sample of gas is administered to a new volume of 10.0 L at 20.2℃ is 0.245 atm'
More on the combined gas law can be found here: https://brainly.com/question/13154969
#SPJ1
Balance the equation: __MgCl2 + __Cr2O3 --> __MgO + __CrCl3
We start by counting the number of atoms of each element on each side of the reaction.
Now we balance the reaction by trial and error, starting with chlorine. We have 2 chlorine atoms in the reactants and 3 clear atoms in the products, so to balance we cross the coefficients placing 3 on the reactant side and two on the product side in the respective molecules:
[tex]3Mg_{}Cl_2+Cr_2O_3\rightarrow MgO+2CrCl_3[/tex]Now we continue with the oxygens, we have 3 oxygens on the reactant side and 1 on the products, so we put the coefficient 3 on the products side in front of the respective molecule:
[tex]3Mg_{}Cl_2+Cr_2O_3\rightarrow3MgO+2CrCl_3[/tex]We now have the balanced equation. We have 3 Mg atoms, 6 Cl atoms, 2 Cr atoms, and 3 O atoms on each side of the reaction.
Consider a solution containing 0.100 M fluoride ions and 0.126 M hydrogen fluoride. The concentration of fluoride ions after the addition of 10.00 mL of 0.0100 M HCl to 25.0 mL of this solution is ________ M.
The concentration of fluoride ions after the addition of 10.00 mL of 0.0100 M HCl to 25.0 mL of this solution is 0.009 M
One of the terms for concentration that is used frequently in solutions would be molarity. It would be explained as the number of moles of solute in one liter of solution.
Molarity can be determined by the formula:
Molarity = moles of solute/ volume of solution
Moles of the HCl can be determined by using the formula:
Moles of solute = molarity × volume of the solution.......(i)
It is given that,
Molarity = 0.0100 M.
Volume = 10.0 mL .
Put the value of given data in above equation:
Moles of solute = (0.0100 M) × (10.0 mL) ×([tex]10^{-3}[/tex]/1 mL)
Moles of solute = [tex]10^{-7}[/tex] M
Now, determine moles of HF.
Moles of solute = (0.126 M) × (25 mL) ×([tex]10^{-3}[/tex]/1 mL)
Moles of solute = 0.00315 M
Total moles = 0.00315 M + 0.0000001 M =0.0031501 M
Total volume = 10.00 mL + 25 mL = 35 mL.
Molarity can be determined by the formula:
Molarity = moles of solute/ volume of solution
Molarity = 0.0031501 M / 35 (1/[tex]10^{-3}[/tex])
Molarity = 0.009 M
Therefore, molarity will be 0.009 M.
To know more about concentration.
https://brainly.com/question/9173336
#SPJ1
A lawyer is presenting a hair sample with its corresponding nuclear DNA that was found at the crime scene. How will this MOST likely affect the criminal case?
A.
The evidence will have a low probability of providing accurate matching results.
B.
The evidence will need to be looked at under a microscope to be admitted.
C.
The evidence will not be admissible in a court case.
D.
The evidence will provide a nearly exact match to the suspect’s hair.
A sample will likely affect a criminal case because this evidence will provide a nearly exact match to the suspect’s hair (Option D).
What is DNA testing?DNA testing refers to the techniques used to obtain DNA from samples that can be used to identify an individual in a police case. A sample of hair may be used for DNA testing because it contains cells and therefore also contains DNA.
Therefore, with this data, we can see that DNA testing allow us to identify individuals for which we need to obtain a sample with cells.
Learn more about DNA testing here:
https://brainly.com/question/11745494
#SPJ1
When 29.0 g of butane reacts with oxygen, 88.0 g of carbon dioxide and 45.0 g of water are produced. What mass of oxygen reacted with the butane?
We need to first write the balanced equation:
[tex]2C_4H_{10}+13O_2\rightarrow8CO_2+10H_2O[/tex]we are given the following:
mass of butane = 29.0 g
mass of carbon = 88.0 g
mass of water = 45.0 g
We want the mass of O2 that reacted.
C4H10 is the limiting reactant, and we know the masses of products produced. We can use that to find out how much oxygen reacted.
We can use CO2:
number of moles of CO2 = 88.0/44.01 = 1.9995 mol
The molar ratio between O2 and CO2 is 13:8
Therefore the number of moles of O2 = 1.9995 x (13/8) = 3.249 mol
Now that we have the number of moles, we can calculate the mass.
m = n x M
m = 3.249 mol x 31.998 g/mol
m = 103.97 g
**NEED USEFUL ANSWER ASAP**
How do the masses of the hottest main sequence stars compare to the masses of the coolest main sequence stars?
Answer:
the more hotter the star, the more brightly it burns
Explanation:
someone just deleted my answer ugh sorry....ill write it again
so, te main sequence is a sequence in mass (and not a sequence in time).
The most massive stars are located at the the top left (since they are the brightest and hottest/bluest). The lowest mass stars are are located at the bottom left ( since they dimmer and cooler/redder).
Following the main sequence from the top left to the bottom right is thus a sequence from high to low mass.
The energy released when a nucleus forms is calledQuestion 26 options: enthalpy. atomic mass. a becquerel. binding energy.
The correct answer in this case is binding energy, which is the energy released when a collection of nucleons form a nucleus.
The correct answer is the last choice.
Complete the table below by deciding whether a precipitate forms when aqueous solutions A and B are mixed. If a precipitate will form, enter its empirical formula in the last column.
1) A precipitate called [tex]Fe(OH)_{2}[/tex]
2) A precipitate is formed called [tex]Mg(CH_{3} COO)_{2}[/tex]
What is a precipitate?The term precipitate is used to describe the product that is formed when there is a reaction between two aqueous phase reactants that leads to the formation of a solid product from the reaction as we can see from the image that is attached.
we now have to look at the reactions as we can see them in the mage that is attached. We must note that we can only say that a precipitate has been formed if the product is solid after we have mixed the aqueous phase reactants.
Learn more about precipitate:https://brainly.com/question/16950193
#SPJ1
Consider the reaction between sodium metal and chlorine gas to form sodium chloride (table salt):2 Na(s) + Cl2 (g) > 2 NaCI(s)If 12.5 g of sodium react with sufficient chlorine, how many grams of sodium chloride should form?1. 12.1 grams2. 1.18 x 10^2 grams3. 15.9 grams4. 3.18 x 10^1 grams5. 51.0 grams
Answer:
[tex]4\text{ : 3.18 }\times\text{ 10}^1\text{ grams}[/tex]Explanation:
Here, we want to calculate the mass of sodium chloride formed
Firstly, we need to get the number of moles of sodium that reacted
To get this, we divide the mass of sodium by its atomic mass
We have that as:
[tex]\frac{12.5}{23}\text{ = 0.5435 mole}[/tex]Now, let us get the number of moles of chlorine
From the equation of reaction, 1 mole of sodium produced 1 mole of sodium chloride
Thus, 0.5435 mole of sodium will also produce 0.5435 mole of sodium chloride
To get the mass of sodium chloride formed, we multiply the above number of moles by the molar mass of sodium chloride
The molar mass of sodium chloride is 58.44 g/mol
Thus, the mass of sodium chloride formed will be:
[tex]58.44\text{ }\times\text{ 0.5435 = 31.8 g}[/tex]Part II Dilution Problems: 17. 350.0 mL of water was added to a 2.3 L solution of NaCl. If the final concentration of the solution was 0.967 M, what was the original concentration of the solution?
ANSWER
The original concentration of the solution is 0.147 mol
EXPLANATION
Given that;
The volume of water is 350.0mL
The volume of NaCl solution is 2.3L
The final concentration of the solution is 0.967M
To find the original concentration of the solution, follow the steps below
Step1: Write the dilution formula
[tex]\text{ M1V1}=M2V2[/tex]Where
• M1 is the original concentration of the solution
,• V1 is the original volume of the of the solution
,• M2 is the final concentration of the solution
,• V2 is the final volume of the solution
Step 2: Convert the volume of water to L
Recall, that 1mL is equivalent to 0.001L
[tex]\begin{gathered} \text{ The volume can be converted below as} \\ \text{ 1mL }\rightarrow\text{ 0.001L} \\ \text{ 350mL }\rightarrow\text{ vL} \\ \text{ Cross multiply} \\ \text{ vL}\times\text{ 1mL }=\text{ 350mL}\times0.001L \\ \text{ Isolate v} \\ \text{ v }=\text{ }\frac{350\cancel{mL}\times\text{ 0.001L}}{1\cancel{mL}} \\ \text{ v }=\text{ 350}\times\text{ 0.001} \\ \text{ v }=\text{ 0.35L} \end{gathered}[/tex]Step 3; Find the original concentration of the solution by substituting by the given data into the formula in step 1
[tex]\begin{gathered} \text{ M1}\times2.3\text{ }=\text{ 0.35}\times\text{ 0.967} \\ \text{ 2.3M1 }=\text{ 0.33845} \\ \text{ Divide both sides by 2.3} \\ \text{ }\frac{2.3M1}{2.3}\text{ }=\text{ }\frac{0.33845}{2.3} \\ \text{ M1}=\text{ 0.147 mol} \end{gathered}[/tex]Hence, the original concentration of the solution is 0.147 mol
Determine the number of atoms of O in 7.23 moles of Ca(NO3)2.
Answer: 43.38 number of atoms
Explanation: If you look at this formula, then this one molecule contains six oxygen atoms. That means number of moles of oxygen atoms. That is six times the number of moles and of calcium nitrate, That is six, multiply 7.23, which comes out to be 43.38 moles of oxygen atom.
What is the mass of 9.50 moles of magnesium chloride, MgCl2 ?'
Definition: This is a type of element or substance that is not a metal.Example: oxygen, nitrogen, hydrogen
This elements or substances that are not a metal are called non-metals.
I think that the answer is Non-metal
7) What is the volume of the liquid in graduated cylinder A before the rockwas added?AYour answer8060BE10080★8 points
To read the measuring cylinder we first count the number of smaller divisions between the marked interval. In this case it is 10 intervals. The marked intervals are 60 and 80, therefore between these values we have 20. We will now divide the 20 by the 10 intervalswhich is equal to 2. Now each interval has a numerical value of 2. We read from the bottom of the meniscus. The meniscus is ttouching the 5th line and so we say 5 x 2=10, we add this to 60.
Answer: 60+10= 70,
Chemistry Electromagnetic Radiation HW Help. Pls real answers
The frequency of the green light from a traffic signal is 5.76 * 10¹⁴ Hz
The frequency of the light is 1.85 * 10¹⁶ Hz
The frequency of the light is 4.84 * 10¹⁴ Hz
The energy of the photons is 1.172 * 10⁻³ J
The energy of the photons is 4.34 * 10⁻² J
What is the frequency of light wave given the wavelength?The frequency of light can be found given the wavelength from the formula below:
frequency = velocity / wavelength8. The frequency of the green light from a traffic signal is calculated below:
velocity of light = 3.0 * 10⁸ m/s
wavelength = 5.2 x 10⁻⁷ m
Frequency = 3.0 * 10⁸ / 5.2 x 10⁻⁷
frequency = 5.76 * 10¹⁴ Hz
9. The frequency of the light is calculated below:
velocity of light = 3.0 * 10⁸ m/s
wavelength = 16.23 x 10⁻⁹ m
Frequency = 3.0 * 10⁸ / 16.23 x 10⁻⁹
frequency = 1.85 * 10¹⁶ Hz
10. The frequency of the light is calculated below:
velocity of light = 3.0 * 10⁸ m/s
wavelength = 6.2 x 10⁻⁷ m
Frequency = 3.0 * 10⁸ / 6.2 x 10⁻⁷
frequency = 4.84 * 10¹⁴ Hz
11. The energy of one of the photons will be calculated as follows:
E = hf
E = hc/λ
Energy of the photons = 2.3 x 10¹¹ x hc/λ
h = 6.626 * 10⁻³⁴Js
λ = 3.9 x 10⁻¹² m
c = 3.0 * 10⁸ m/s
E = 2.3 x 10¹¹ x 6.626 * 10⁻³⁴ * 3.0 * 10⁸ / 3.9 x 10⁻¹²
E = 1.172 * 10⁻³ J
12. The energy of one of the photons will be calculated as follows:
E = hf
E = hc/λ
Energy of the photons = 9.4 x 10¹⁶ x hc/λ
h = 6.626 * 10⁻³⁴Js
λ = 4.3 x 10⁻⁷ m
c = 3.0 * 10⁸ m/s
E = 9.4 x 10¹⁶ x 6.626 * 10⁻³⁴ * 3.0 * 10⁸ / 4.3 x 10⁻⁷
E = 4.34 * 10⁻² J
Learn more about the energy of photons at: https://brainly.com/question/15946945
#SPJ1
A photon has a frequency of 3.16 * 10^7 Hz. Calculate its energy
If the photon has a frequency of 3.16 × 10 ⁷ Hz, then the energy of the the photon as per Planck's law would be 1.978× 10⁻²⁶ Joules
What is Wavelength?It can be understood in terms of the distance between any two similar successive points across any wave.
C = λν
As given in the problem we have to calculate the energy of the light if the frequency of light is 3.16 × 10 ⁷ Hz
The energy of the photon = h ν
= 6.26 × 10⁻³⁴ × 3.16 × 10 ⁷
= 1.978× 10⁻²⁶ Joules
Thus, If the photon has a frequency of 3.16 × 10 ⁷ Hz, then the energy of the the photon as per Planck's law would be 1.978× 10⁻²⁶ Joules.
To learn more about wavelength, refer to the link given below ;
brainly.com/question/7143261
#SPJ1
What is the maximum number of electrons that can occupy the n = 2 shell?
Explanation:
If n = 2 we have this posibility:
This shell contains 2 subshells: s and p
Subshell 2s can only contain 2 electrons
Subshell 2p can only contain 6 electrons
Answer: In total, we can have 8 electrons in n = 2
Why is CuSO4 the correct formula for copper (ii) sulfate and not CuSO3?
The correct formula of copper (II) sulfate is CuSO₄ because Copper ion (Cu²⁺) has +2 charge and sulfate ion SO₄²⁻ has -2 charge, while CuSO₃ is copper(II) sulfite.
What is copper sulfate?The CuSO₄ molecule contains an ionic bond between the copper cation (Cu²⁺) and the sulfate anion (SO₄²⁻).
The copper sulfate in its pentahydrate form is given by the chemical formula CuSO₄.5H₂O. This form of copper sulfate is characterized by its bright blue color but the anhydrous form of this salt is a white powder.
The oxidation state of the copper atom in a CuSO₄ molecule is +2. The molar mass of the pentahydrate and anhydrous forms of copper sulfate are 249.685 grams/mole and 159.609 grams/mole respectively.
Anhydrous CuSO₄ has a powdery appearance and a grey-white, while the pentahydrate has a bright blue color.
Learn more about copper sulfate, here:
https://brainly.com/question/22560035
#SPJ1
Calculate the frequency and the energy of blue light that has a wavelength of 423 nm (Note => 423 nm = 4.23 * 10^7 m)
According to the Planck's equation,the energy and frequency of blue light are 4.699×10[tex]^-19[/tex] J and 2.363×10⁶ m[tex]^-1[/tex] respectively.
What is Planck's equation?Max Planck discovered the theory which stated that energy is transferred in the form of discrete packs which are called quanta and thus proposed an equation called the Planck's equation which relates energy and frequency of a photon and is given as, E=hcυ or in terms of wavelength it is ,E=hc/λ.
The equation makes use of a constant which is called the Planck's constant and it's value is 6.626×10[tex]^-34[/tex] Js.
In the given problem, energy is calculated as,E=6.626×10[tex]^-34[/tex]×3×10⁸/4.23×10[tex]^-7[/tex]=4.699×10[tex]^-19[/tex] J.
The frequency of light is calculated as follows,4.699×10[tex]^-19[/tex]/19.878×10[tex]^-26[/tex]=2.363×10⁶ m[tex]^-1[/tex].
Thus , the energy and frequency of blue light are 4.699×10[tex]^-19[/tex] J and 2.363×10⁶ m[tex]^-1[/tex] respectively.
Learn more about Planck's equation,here:
https://brainly.com/question/5528489
#SPJ1
In the reaction, 2NaOH + H2SO4 —> Na2SO4 + H2O, 40.0 g NaOH reacts with 60.0 g H2SO4. Which is the limiting reactant
Step 1
The reaction must be written, completed, and balanced:
2 NaOH + H2SO4 => Na2SO4 + H2O
-----------
Step 2
Information provided:
Mass of NaOH = 40.0 g
Mass of H2SO4 = 60.0 g
--
Information needed:
The molar masses:
NaOH) 40.0 g/mol approx.
H2SO4) 98.0 g/mol approx.
-----------
Step 3
The limiting reactant?
By stoichiometry:
1 mole NaOH = 40.0 g
1 mole H2SO4 = 98.0 g
2 NaOH + H2SO4 => Na2SO4 + H2O
2 x 40.0 g NaOH ----------- 98.0 g H2SO4
40.0 g NaOH ----------- X
X = 40.0 g NaOH x 98.0 g H2SO4/2 x 40.0 g NaOH = 49.0 g H2SO4
For 40.0 g of NaOH, 49.0 g of H2SO4 is needed but is provided 60.0 g of H2SO4. Therefore, the excess is the H2SO4, and the limiting reactant is the NaOH.
Answer: the limiting reactant is NaOH
Write formulas or names as appropriate for each of the following hydrates. 1. Magnesium sulfate heptahydrate 6. CoSO4•H2O 2. Copper(I) sulfate pentahydrate 7. Na2CrO4•4H2O 3. Potassium phosphate decahydrate 8. CuF2•2H2O 4. Calcium chloride hexahydrate 9. Sr(NO3)2•6H2O 5. Iron(III) nitrate nonahydrate 10. ZnSO4•7H2O
Answer:
Explanation:
Here, we want to give the names or formulas of the given hydrates
1) Magnesium sulfate heptahydrate
The first thing we have to do here is write the formula for magnesium sulfate.
Hepta means 7, which is pointing to the fact that there are 7 water molecules
We can have this as:
[tex]\text{MgSO}_4\cdot7H_2O[/tex]6) Here, we can see that the element involved is cobalt with an oxideation number of 2. We also have just one water of crystallization
So, we have the name of the compound as:
[tex]\text{Cobalt (II) Sulphate hydrate}[/tex]Monica works in a crime lab. Her supervisor tells her that she needs to better understand Locard’s Exchange Principle. How will she MOST accurately demonstrate her understanding of this concept?
A.
She will always test for the presence of blood at crime scenes.
B.
She will use both fingerprints and bullet matching to solve crimes.
C.
She will keep evidence separated so it doesn’t get contaminated.
D.
She will exchange information openly with other crime investigators.
She will keep evidence separated so it doesn’t get contaminated demonstrates the understanding of Locard’s Exchange Principle and is denoted as option C.
What is Locard’s Exchange Principle?This principle states that an individual who commits a crime will bring something into the crime scene and leave with something from it. This also explains that they can be used as evidence during investigation by the appropriate authorities.
Since we are aware that new substances are always brought into and carried away from the crime scene then it is best to keep the evidence separated so it doesn’t get contaminated.
This ensures that the results gotten from the analysis and investigation are accurate and is therefore the reason why option C was chosen as the correct choice.
Read more about Crime scene here https://brainly.com/question/10702774
#SPJ1
Of the elements calcium, Ca, beryllium, Be, barium, Ba, and strontium, Sr, arrange in order of decreasing atomic radii. Explain your answer using the terms electron and energy level.
Order these elements Ca, Be, Ba, and Sr:
If we take a look at the periodic table trends we will see that the atomic radii increases from left to right and from top to bottom.
So let's look for our elements:
Be: atomic number 4
Ba: atomic number 56
Ca: atomic number 20
Sr: atomic number 38
They are all Alkaline Earth Metals, they are in the same group.
So we said that the atomic radii increases from top to bottom. If we have to arrange them in order of decreasing atomic radii, we have to put first the largest one. The Barium is the one that is in a lower position, then Sr, then Ca and finally Be.
So the order of our problem is Ba, Sr, Ca and Be.
Which is the explanation?
As we move down in the periodic table the number of electrons increases. They all have 2 electrons in the outer shell. But let's look at the electronic configuration of two of them:
Ca:
Ba:
How many grams of MgO are produced when 40.0 grams of O2 react completely with Mg? I picked B but I’m not sure if I’m correct
Step 1
The reaction provided:
2 Mg (s) + O2 (g) => 2 MgO (s) (completed and balanced)
-----------
Step 2
Information provided:
40.0 g of O2 which react completely
---
Information needed:
The molar masses of:
O2) 32.0 g/mol
MgO) 40.3 g/mol
-----------
Step 3
By stoichiometry,
2 Mg (s) + O2 (g) => 2 MgO (s)
32.0 g O2 ------- 2 x 40.3 g MgO
40.0 g O2 ------- X
X = 40.0 g O2 x 2 x 40.3 g MgO/32.0 g O2
X = 101 g MgO
Answer: C 101 g
Given the equation below, how many moles of nitrogen gas (N2) areneeded to react with 7.5 moles of hydrogen gas (H2)?N2+ 3H2 —>2 NH3
Answer
2.5 moles of N₂ are needed to react with 7.5 moles of hydrogen gas
Explanation
Given:
Equation: N₂ + 3H₂ → 2NH₃
Moles of H₂ = 7.5 moles
What to find:
The moles of nitrogen gas (N₂) needed to react with 7.5 moles of hydrogen gas
Step-by-step solution:
Let the mole of N₂ needed be x.
From the given balanced chemical equation:
3 moles of H₂ react with 1 mole of N₂
Therefore, 7. 5 moles of H₂ will react with x moles of N₂
Cross multiply
[tex]\begin{gathered} x\text{ moles }N_2\times3\text{ moles H}_2=7.5\text{ moles H}_2\times1\text{ mole N}_2 \\ \text{Divide both sides by 3 moles H}_2 \\ \frac{x\text{ moles }N_2\times3\text{ moles H}_2}{3\text{ moles H}_2}=\frac{7.5\text{ moles H}_2\times1\text{ mole N}_{2}}{3\text{ moles H}_2} \\ x\text{ moles }N_2=2.5\text{ moles} \end{gathered}[/tex]What is the correct name-formula pair for calcium (II) oxide?
The chemical formula of calcium (II) oxide is CaO, wherein the valency of both oxygen and calcium is two.
What is chemical formula?Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.
There are four types of chemical formula:
1)empirical formula
2) structural formula
3)condensed formula
4)molecular formula
Learn more about chemical formula,here:
https://brainly.com/question/11995171
#SPJ1
Which temperature is unattainable?
a)_1k
b)_1°C
c)_1°F
d)All of these
Answer:
A is the correct answer.
Explanation:
It is possible to reach 1°C and 1°F because they are both units of temperature. But 1k is not a unit of temperature.