A sample consists of ethanol and water.
Ethanol has a density of 0.79 g/mL.
Which liquid will float on top of the sample
- the ethanol or the water?

A coyote is a species considered as a consumer in the food chain because they need to eat other live organisms to survive (Option 2).

The role of consumers in the food chain is to eat other organisms such as plants (in the case of herbivore consumers) or meat (in the case of carnivore consumers). Coyote is a carnivore consumer.

Therefore, with this data, we can see that the role of a consumer in the food chain is to consume (eat) other organisms.

Complete question:

Choose the correct option. A coyote is a ____ producer, consumer, decomposer.

Learn more about the role of consumers in the food chain here:

https://brainly.com/question/14075096

#SPJ1

Considering the definition of calorimetry, if 200.0 g of ice absorb 1255.0 J of heat, the temperature change is 2.988°C.

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change). So, the amount of heat that a body receives or transmits is determined by the following expression:

Q = c×m×ΔT

Where:

In this case:

Replacing in the definition of calorimetry:

1255 J = 2.1 J/gC× 200 g× ΔT

Solving:

1255 J ÷(2.1 J/gC× 200 g)= ΔT

2.988 °C= ΔT

Finally, the temperature change is 2.988°C.

Learn more about calorimetry:

brainly.com/question/15332904

#SPJ1

The balanced chemical reaction equation is obtained as [tex]Fe(s) + 2O_{2} (g) + H_{2} O ---- > 2Fe(OH)_{2} (aq)[/tex]

The term chemical reaction equation refers to the way that we represent the combination of the reactants that leads to the formation of the products ins given chemicals reaction process. We know that the stoichiometry of the reaction is very important as it does show us how the reactants and the products can be combined for the particular reaction that we are considering.

We now have the reaction that is occurring between the metallic iron and oxygen and water. This is the reaction that occurs when there is rusting that is occurring on a given or  particular piece of iron as we have it here.

We shall now attempt to look at the equation so that the equation that has been shown in the question can be appropriately balanced according to the rules.

Thus, we could write the balanced chemical reaction equation as; [tex]Fe(s) + 2O_{2} (g) + H_{2} O ---- > 2Fe(OH)_{2} (aq)[/tex]

Learn more about reaction equation:https://brainly.com/question/3588292

#SPJ1

The mass of the 13 cm³ of copper, given that 100 cm³ of it has a mass of 890 g is 115.7 g

We'll begin by obtainig the density of the copper. This can be obtained as illustrated below:

Density = mass / volume

Density of copper = 890 / 100

Density of copper = 8.9 g/cm³

Finally, we shall determine the mass of the 13 cm³ of copper. This is obatined as follow:

Density = mass / volume

Cross multiply

Mass = Density × volume

Mass of copper = 8.9 × 13

Mass of copper = 115.7 g

Thus, the mass of the copper is 115.7 g

Learn more about density:

https://brainly.com/question/952755

#SPJ1

The mass of 13 cm³ of copper with a volume of 100 cm³ has a mass of 890 g is 115.7 grams.

Mass is defined as a dimensionless number used to describe the mass of a particle or item.

We'll start by finding out how dense copper is.

Given, Volume = 100 cm³

           Mass = 890 g

Density = Mass / Volume

             = 890 g / 100 cm³

             = 8.9 g/cm³

Now to determine mass is 13 cm³ of copper is

Density = Mass / Volume

So, Mass = Density x Volume

               = 8.9 g/cm³ x 13 cm³

               = 115.7 grams

Thus, the mass of 13 cm³ of copper with a volume of 100 cm³ has a mass of 890 g is 115.7 grams.

To learn more about mass, refer to the link below:

https://brainly.com/question/26789700

#SPJ1

Answer:

Explanation:

About 1.3 seconds

It takes light about 1.3 seconds to travel from the moon to the Earth at a distance of 384000 km. This is because the speed of light is about 300000 km/s. So, it takes light about 1.3 seconds to travel from the moon to the Earth.

If mercury (ii) oxide is heated and decomposes, the product of the reaction be 4 Hg.

Mercury is a chemical element with the atomic number 80 and the symbol Hg. Formerly known as hydrargyrum and also known as quicksilver, In order to fragment anything into smaller pieces or to break it into smaller pieces, mercury is used in thermometers, barometers, manometers, sphygmomanometers, float valves, mercury switches, mercury relays, fluorescent lights, and other devices: Methane and carbon dioxide are produced when microbes break down organic waste. staying fresh while decomposes The process of recycling nutrients that an organism (plant or animal) has utilized to develop its body begins with decomposes. It is the process by which the decomposing dead tissues transform into more basic organic forms. For a large number of the species at the base of ecosystems, these serve as a food supply.

Learn more about mercury here :

https://brainly.com/question/4025230

#SPJ4

The following chlorides are ionic or covalent:

SiCl₄ = covalent

PCl₃ = covalent

CaCl₂ = ionic

CsCl = ionic

CuCl₂ = ionic

CrCl₃ = ionic

SiCl₄ is silicon tetrachloride. SiCl₄ is a covalent. The bond between silicon and chlorine is formed by the sharing of electrons.

PCl₃ is Phosphorous trichloride . PCl₃ is covalent. Phosphorus contain 5 electrons in valence shell and requires 3 more to complete octet and chlorine require one electron to complete octet so, the bond formed is by sharing of electron.

CaCl₂ is calcium chloride. CaCl₂  is an ionic. calcium is metal and  metal donates electron  to  chlorine is non metal and non metal accept electrons  and become Ca²⁺  and Cl⁻. The bond formed by the transfer of electrons.

CsCl is cesium chloride. CsCl is an ionic. symbol of ions : Cs⁺ and Cl⁻

CuCl₂ is copper(II) chloride. CuCl₂ is ionic formed by the transfer of electrons. symbol of ions : Cu²⁺ and Cl⁻

CrCl₃  is chromium(III) chloride. CrCl₃  is an ionic. symbol of ions : Cr³⁺ and Cl⁻.

Thus, The following chlorides are ionic or covalent:

SiCl₄ = covalent

PCl₃ = covalent

CaCl₂ = ionic

CsCl = ionic

CuCl₂ = ionic

CrCl₃ = ionic

To learn more about ionic and covalent here

https://brainly.com/question/15105831

#SPJ1

The volume of water used is 500cm^3.

The volume of water used.

NaOH concentration in mol/dm^3=NaOH concentration in g/dm^3/molar mass of NaOH.

M of NaOH=23+16+1=40

M=40 g/mol

0.2mol= concentration of NaOH in g/dm^3/40g/mol

=0.2mol/dm^3*40g/mol

=8g/dm^3

we know that,

1dm^3=1000cm^3

4.00g of NaOH will be dissolved in 4g*1000cm^3/8g

=500cm^3 of water

So, the volume of water used is 500cm^3.

Learn more about problems on the volume of water.

https://brainly.com/question/28817564

Answer:

20cm³

Explanation:

Volume = Molarity*number of moles

number of moles = Mass given/Molar mass

number of moles= 4.00g/40.0g

number of moles= 0.1mols

thus:

Volume= 0.200mol/dm³*0.1mol

Volume= 0.02dm³(20cm³)

Explanation

Given:

mass of glycol = 0.250g

mass of solvent (water) = 40g = 0.04 Kg

i = 1

Required: The boiling point of the solution

Solution

where Kb is the boiling point elevation constant

m is the molal concentration (molality) of all species

Step 1: Find the moles of glycerol

n = m/M

n = 0.250g/92,09382 g/mol

n = 2.71x10^-3 mol

Step 2: Find the molality

molality (m) = moles of solute/Kg of solvent

molality = 2.71x10^-3/0.04Kg

molality = 0.068 m

Step 3: Find the change in temperature

Kb of water = 0.512 cm^-1

DT = 0.512 x 0.068

DT = 0.035 'C

Step 4: Find the boiling point

Boiling point of water = 100 'C

DT = 0.035 'C

New boiling point =100 + 0.035 = 100.035 'C

Answer

100.035 'C

In cellular respiration, carbon dioxide and water are the reactants, and fuel and oxygen are the products, this statement is false.

As in the cellular respiration, the fuel which is glucose and oxygen are the reactants, these react to form ATP, while the carbon dioxide and water are the products formed.

The equation of the reaction of cellular respiration is written as -

C₆H₁₂O₆ + 6 O₂ → 6 CO₂ + 6 H₂O + 25 ATP

glucose + water → carbon dioxide + water + ATP

Carbon dioxide and water are considered as byproducts or waste products. Aerobic respiration uses up the glucose and oxygen which releases the energy or results in the ATP formation.

Therefore, the statement given is false.

To learn more about cellular respiration,

brainly.com/question/14383125

#SPJ1

Energy was lost by substance A to the environment is the statement which best supports the data in the table and is denoted as option D.

This is referred to as the processes which is characterized by the movement of energy from one system to another an an example is heat energy transfer which have different techniques such as conduction, convection etc.

Temperature on the other hand is the measure of the degree of hotness or coldness of a substance and is influenced by heat energy.

From the graph, we can deduce that substance has a temperature which was decreasing with time while substance B has a temperature which was constant throughout.

This therefore means that Energy was lost by substance A to the environment hence ,the reason why option D was chosen as the correct choice.

Read more about Energy transfer here https://brainly.com/question/22379099

#SPJ1  

Answer:

This is NOT a CUBE..

now Considering that one side of one small block is equal to 1 unit.

Then

Length = 3 units

Width = 3 units

Height = 4 units

Please tell me if this is correct

Length would be 3 units, Height is 4 units, and Width is I want to say 5 or 6 not truly sure

This conclusion is wrong; because the covalent molecules do not conduct electricity.

A covalent bond is created when one or more pairs of electrons are exchanged between two atoms. The two atomic nuclei are drawing these electrons in unison. A covalent bond is created when there is not enough room between the electronegativities of two atoms for an electron transfer to occur and produce ions.

The atoms associate in a covalent bond by exchanging electrons. Typically, nonmetals form covalent connections with one another. For instance, each hydrogen (H) and oxygen (O) share two electrons to form the molecule of two hydrogen atoms singly linked to one oxygen atom that is known as water (H₂O).

To know more about covalent molecules visit:

https://brainly.com/question/769196

#SPJ4

Answer:

A water turbine is used to convert the energy contained in water, potential energy or kinetic energy, into mechanical or electrical energy. There are two types of water turbines, the reaction water turbine, and the impulse water turbine.

Explanation:

Answer:

Water turbines are used to take energy whether it may be kinetic or potential from the water and convert that energy into mechanical, or electrical energy.

Explanation:

The percent composition are the percent in mass of each atom in the molecule.

Since we know that the molar mass of the substance is 334.0 g/mol, we can use it to figure out how much of each atom we have per molecule.

Starting from carbon, we know it is 75.42% of the mass.

In 1 mol of the substance, there are 334.0 g, 75.42% of which is from carbon atoms.

So, in 1 mol of the substance, there are the following mass of carbon:

The aromic mass of the carbon atom is 12.0107 g/mol.

That is, in 1 mol of the substance -> 251.9028 g of C.

That mass of carbon is equivalent to:

So, in 1 mol of the substance -> 251.9028 g of C -> 21 mol of C. This means that for each molecule of the substance we have 21 atoms of carbon.

Now, we can just repeat the process for Hydrogen, Nitrogen and Oxygen.

Hydrogen has an atomic mass of 1.00794 g/mol, and the percent composition of it is 6.63%, so:

So, for each molecule of the substance there are 22 atoms of hydrogen.

Nitrogen has an atomic mass of 14.0067 g/mol, and the percent composition of it is 8.38%, so:

So, for each molecule of the substance there are 2 atoms of nitrogen.

Oxygen has an atomic mass of 15.9994 g/mol, and the percent composition of it is 9.57%, so:

So, for each molecule of the substance there are 2 atoms of oxygen.

To summarize, we have, for each molecule of the substance:

- 21 carbon

- 22 hydrogen

- 2 nitrogen

- 2 oxygen

So, the molecular form of the substance is C₂₁H₂₂N₂O₂.

Radium have a lower ionization energy than Barium because electrons are closer to the nucleus

What is ionization energy?

Ionization energy can be simply stated as a measurement of an atom's or ion's inclination to give up an electron or of how challenging it is to remove an electron from them. An electron is often lost when a chemical species is in its ground state.

The atom displays a smaller radius than anticipated and the s electrons are more challenging to expel because these electrons are located nearer the nucleus. The first ionization enthalpy of Radium is higher than that of Barium.

Learn more about ionization energy from given link

https://brainly.com/question/20658080

#SPJ13

What occurs when copper sulfate solution is combined with a piece of silver metal?

If the reaction happens, you should also write the chemical equation in balance.

Reactions to displacement as a first option

A more reactive metal can displace a less reactive metal from a solution in a displacement reaction. The reactivity series of metals can be used to forecast the end products of a displacement process. The metals are arranged according to their reactivity with diluted acids in the reactivity series. A specific metal in the reactivity series may be displaced by metals positioned above it.

In the reactivity series, some of the elements above hydrogen (H) are potassium (K), sodium (Na), magnesium (Mg), zinc (Zn), and others. Several of the metals in the reactivity sequence below hydrogen

To learn more about copper sulfate solution is combined with a piece of silver metal refer more

https://brainly.in/question/3633119

#SPJ13

Correct option is OC-  Developing a machine to control the rate of a reaction according to engineering

What is engineering?

Engineering is a field that has been performed for thousands of years, but STEM education, which attempts to engage students with science, technology, engineering, and mathematics, includes it as a component.

The Parthenon, Stonehenge, and the Pyramids of Giza, among other places, are instances of engineering. However, modern engineers work in a variety of fields in addition to erecting structures.

Engineers work on a variety of things, including as cell membranes, building materials, prosthetics, increasing the efficiency of engines and vehicles, and creating renewable energy sources.

Correct option is OC-  Developing a machine to control the rate of a reaction according to engineering

To know more engineering from the given link

https://brainly.com/question/28321052

#SPJ9

Answer:

Explanation:

The mass of the bone sample can be found by using the formula

mass = density × volume

From the question

density = 1200mg/cm^3

volume = 39.5cm^3

We have....

mass = 1200 × 39.5 = 47400

We have the final answer as

Hope this helps you

the diagram of downs cell

Answer: Benzylic hydrogen refer to the hydrogen atoms attached to the carbon atom just next to the benzene group. In ethyl benzene carbon next to benzene has two hydrogen atoms only.

Explanation: For example, among the inorganic compounds, oxides contain O 2− ions or oxygen atoms, hydrides contain H − ions or hydrogen atoms, sulfides contain S 2− ions, and so forth.

According to the given statement The molarity of the iron(II) solution is 0.648 M.

The amount of the sample in a specific solution volume is defined as its molarity (M). The molarity of a solute per litre of a solution is known as molarity. The molar concentration is yet another name for molarity.

Iron(II) solution volume (V₁) = 25.0 mL/0.025 L

Dichromate solution (V₂) has a volume of 18.0 mL, or 0.018 L.

Dichromate solution molarity (M₂) = 0.150 M

Molarity of dichromate solution is :

M₂ = n₂/V₂

(n₂  = M₂* V₂ = 0.150  * 0.018 = 2.7 * 10⁻³ mol

Complete balanced equation is given below.

[tex]6 \mathrm{Fe}^{2+}(a q)+\mathrm{Cr}_2 \mathrm{O}_7^{2-}(a q)+14 \mathrm{H}^{+}(a q) \rightarrow 6 \mathrm{Fe}^{3+}(a q)+2 \mathrm{Cr}^{3+}(a q)+7 \mathrm{H}_2 \mathrm{O}[/tex]

It is obvious from the equation that 1 mole of dichromate is needed to make 6 moles of iron(II) solution.

Therefore, we calculate the number of moles of iron(II) solution using the unitary technique.

1 mole of dichromate is equal to 6 moles of iron (II)

6n₂ moles of iron are equal to n₂ moles of dichromate (II)

=6 * 2.7 * 10⁻³ = 0.0162 mol Fe²⁺

So, 0.0162 moles of iron(II) is needed. Therefore,

Now, molarity of iron(II) solution is given as: n[tex]_1[/tex] = 0.0162

Molarity = Moles ÷ Volume

M₁ = n[tex]_1[/tex]/V₁

M₁ = 0.0162mol/0.025 L = 0.648 M

The molarity of the iron(II) solution is 0.648 M.

To know more about Molarity visit:

https://brainly.com/question/8732513

#SPJ4

The complete question is -

The titration of 25.0 mL of an iron(II) solution required 18.0 mL of a 0.150M solution of dichromate to reach the equivalence point. What is the molarity of the iron(II) solution?

The final pressure of the balloon that was initially filled with a volume of 2.20L to 3.86L is 430.3mmHg.

The pressure of a gas can be calculated using the Boyle's law equation as follows:

P₁V₁ = P₂V₂

Where;

According to this question, the volume of a balloon filled with He at 755 mmHg is expanded from 2.20L to 3.86L at a constant temperature. The final pressure can be calculated as follows:

755 × 2.2 = P₂ × 3.86

1661 = 3.86P₂

P₂ = 430.3mmHg

Therefore, the final pressure of the balloon that was initially filled with a volume of 2.20L to 3.86L is 430.3mmHg.

Learn more about pressure at: https://brainly.com/question/15265703

#SPJ1

Answer:

Electrical energy is caused by moving

electric ions.

Explanation:

The faster the charges move, the more electrical energy they carry. As the charges that cause the energy are moving, electrical energy is a form of kinetic energy.

A synthesis reaction is a reaction in which two compounds come together to form one. In this case, if the product is lithium sulfide, the reactants will be lithium and sulfur. Lithium in its natural form is solid, and sulfur also has a solid-state. Lithium sulfide is also a solid compound. The synthesis reaction will be:

Now, we have to balance the equation. We have two atoms of Li on the products side and 1 atom of Li on the reactants side. So, we put the coefficient 2 in Li molecules.

Now, we have the balanced equation of the synthesis reaction of Lithium Sulfide

Answer:

The Atomic Number

Explanation:

The atomic number is the number of protons of an atom in its nucleus.

Each element has a unique atomic number.

(view screenshot too, to find where it is in element table)

The distance between the earth and star = 8 ✕ (9.46 ✕ 1012) = 7.6 ✕ 1013 km.

What is exoplanet?

Every planet in our solar system orbits the Sun. Planets known as exoplanets orbit other stars. It is quite challenging to directly observe exoplanets with telescopes. They are hidden by the bright light from the stars they orbit.

It is challenging to give distances in kilometers for many celestial objects since they are so far away from the earth, such as galaxies or stars.

How far light may travel in a year is measured in large units called light-years. The vast distances are therefore expressed in terms of light-years.

9.46 x 1012 kilometres make up a light year.

In other words, if a star is eight light-years away, light would travel that distance in eight years. This is how the distance between a star and the earth is calculated.

Therefore, the distance between the earth and the star is 8 (9.46 1012) = 7.6 1013 kilometers.

Learn more about exoplanet from given link

https://brainly.com/question/13617262

#SPJ13

         Red blood cells contain hemoglobin. When carbonic acid, which is found in tissues, is present, hemoglobin releases the bound oxygen. The oxygen that is attached to hemoglobin is released into the blood's plasma and taken up by the tissues in the capillaries, which are also where carbon dioxide is created.

          If more air is exchanged, the partial pressures of the outside atmosphere will approach but never reach them due to the remaining volume.

      Combustible Oxide : The dissociation curve shifts to the left as a result of one CO molecule binding to hemoglobin increasing the affinity of the other binding locations for oxygen.

       Lower CO2, greater pH, and lower temperature all move oxygen dissociation to the left.

       The pCO2 is significantly influenced by two variables. The person's breathing rate and depth are the first thing to consider. Someone who is hyperventilating will "blow out" more CO2, which will lower pCO2 levels. Holding one's breath causes CO2 to be retained, which raises pCO2 levels.

      Limited pressures : There are two reasons why the alveolar oxygen partial pressure is lower than the ambient O2 partial pressure. First, the upper airway humidifies the air as it reaches the lungs, lowering the partial pressure of oxygen to around 150 mmHg while increasing the partial pressure of water vapour (47 mmHg).

To Learn more About hemoglobin, Refer:

https://brainly.com/question/5385828

#SPJ4

The value of R from the ideal gas equation is 0.082 atm.L/K/mol.

The ideal gas equation is the equation that shows the relationship between pressure, and volume. moles of a gas and the temperature of a gas under ideal conditions.

The ideal gas equation is given below as follows:

PV = nRT

At standard temperature and pressure, the values of the variables are given below;

Pressure, P = 1 atm

Volume, V = 22.4 Liters

Number of moles, n = 1 mole

Temperature, T = 273.15 K

R = PV/nT

R = 1 * 22.4 / (273.15 * 1)

R = 0.082 atm.L/K/mol

Learn more about the ideal gas equation at: https://brainly.com/question/20212888

#SPJ1

A covalent bond bond is appropriately described as occurring when one or even more electrons move of one atom to another.

a bond in which the two bound atoms' electron densities are unequally distributed as a result of either a difference in the electronegativity or the effects of induction.

A covalently bonded bond is represented by the water molecule, written as H2O. The oxygen atom is given more time with the electrons than for hydrogen atoms due to the unequal distribution of the electrons.

The electron is an unit of matter with a negative zero elementary charge electric charge. Due to their lack of known components, electrons, which are part of the first generation of lepton particles family, are typically regarded to be elementary particles or substructure

To know more about covalent polar bond visit:

https://brainly.com/question/28295504

#SPJ4