What does this picture show?
A. Good accuracy, poor precision
B. Poor accuracy, good precision
C. Good accuracy, good precision
D. Poor accuracy, poor precision

Answer:

[tex]x=119m[/tex]

Explanation:

Hello,

In this case, since the hockey puck was moving at 34 m/s and suddenly stopped (final velocity is zero) in 7 seconds, we can first compute the acceleration via:

[tex]a=\frac{v_f-v_o}{t}=\frac{0m/s-34m/s}{7s}\\ \\a=-4.86m/s^2[/tex]

In such a way, we can compute the displacement via:

[tex]x=\frac{v_f^2-v_o^2}{2a}\\ \\x=\frac{0^2-(34m/s)^2}{2*-4.86m/s^2}\\ \\x=119m[/tex]

Best regards.

Answer:

the mass of the air in the classroom = 2322 kg

Explanation:

given:

A classroom is about 3 meters high, 20 meters wide and 30 meters long.

If the density of air is 1.29 kg/m3

find:

what is the mass of the air in the classroom?

density = mass / volume

where mass (m) = 1.29 kg/m³

volume = 3m x 20m x 30m = 1800 m³

plugin values into the formula

  1.29 kg/m³   =        mass    

                             1800 m³

mass =  1.29 kg/m³  ( 1800 m³ )

mass = 2322 kg

therefore,

the mass of the air in the classroom = 2322 kg

If A classroom is about 3 meters high, 20 meters wide and 30 meters long. If the density of air is 1.29 kg/m3, then the mass of the air in the classroom is 2322Kg.

Density is the ratio of mass to volume. it tells how much mass a body is having for its unit volume. for example egg yolk has 1027kg/m³ of density, means if we collect numbers of egg yolk and keep it in a container having volume 1 m³ then total amount of mass it is having will be 1027kg. Density is a scalar quantity. when we add egg yolk into the water, egg yolk has greater density than water( 997 kg/m³), because of higher density of egg yolk it contains higher mass in same volume as water. hence due to higher mass higher gravitational force is acting on the egg yolk therefore it goes down on the inside the water. water will float upon the egg yolk. same situation we have seen when we spread oil in the water. ( in that case water has higher density than oil. thats why oil floats on the water).

Given,

Height = 3 m

Width = 20 m

length= 30 m

Density of air = 1.29kg/m³

The  volume of the room = 3×20×30 m³

Volume V = 1800m³

By formula,

Density = Mass/Volume

1.29kg/m³ = Mass/1800m³

Mass of the air = 1.29×1800 = 2322 Kg

The mass of the air is classroom is 2322Kg.

To know more about density :

https://brainly.com/question/29775886

#SPJ2.

Answer:

D) Humans

Explanation:

Photosynthesis is a useless ability without some way of exposing yourself to as much of the Sun's energy as possible. That requires a large surface area, relative to their volume. Plants achieve that with large, horizontal, light-capturing surfaces – leaves.

Answer:

The answer is tiny organisms known as cyanobacteria, or blue-green algae. These microbes conduct photosynthesis: using sunshine, water and carbon dioxide to produce carbohydrates and, yes, oxygen. In fact, all the plants on Earth incorporate symbiotic cyanobacteria (known as chloroplasts) to do their photosynthesis for them down to this day.

Explanation:

Answer: Synthetic polymers are lightweight.

Explanation:

A  benefit of using synthetic polymers is the fact that synthetic polymers are lightweight.

A polymer is a molecule composed of many repeating subunits.

Synthetic polymers are artificial polymers created by humans.

Most of the synthetic polymers are not biodegradable (unlike natural fibers such as cotton).

Synthetic polymers are classified according to their use into plastics, elastomers and synthetic fibers.

The advantages of synthetic polymers include: hard to break, being lightweight, and they last for a long time.

In conclusion, a benefit of using synthetic polymers is the fact that synthetic polymers are lightweight.

Learn more in:

https://brainly.com/question/4047007?referrer=searchResults

Answer:

v =  57.2 m/s

Explanation:

The average velocity of the train can be defined as the total distance covered by the train divided by the time taken by the train to cover that distance. Therefore, we will use the following formula to find the average velocity of the train:

v = s/t

where,

s = distance covered = 460 km = (460 km)(1000 m/1 km) = 4.6 x 10⁵ m

t = time taken to cover the distance = 2 h 14 min

Now, we convert it into minutes:

t = (2 h)(60 min/1 h) + 14 min

t = 120 min + 14 min = (134 min)(60 s/1 min)

t = 8040 s

Therefore, the value of velocity will be:

v = (4.6 x 10⁵ m)/8040 s

v =  57.2 m/s

Answer:

the winds will make the bird stop

Explanation:

is basically 20 - 20

Answer:

Straight line in the direction of the tangential velocity the ball had at the moment the string broke

Explanation:

After the string breaks, the ball now disconnected from the centripetal force that was exerted via the string, continues its travel in a straight line in the direction of the tangential velocity it had at the moment the string broke.

Answer:

B

Explanation:

just took the test :)

Answer:

The tensions in [tex]T_{BC}[/tex] is approximately 4,934.2 lb and the tension in [tex]T_{BD}[/tex] is approximately  6,035.7 lb

Explanation:

The given information are;

The angle formed by the two rope segments are;

The angle, Φ, formed by rope segment BC with the line AB extended to the center (midpoint) of the ship = 26.0°

The angle, θ, formed by rope segment BD with the line AB extended to the center (midpoint) of the ship = 21.0°

Therefore, we have;

The tension in rope segment BC = [tex]T_{BC}[/tex]

The tension in rope segment BD = [tex]T_{BD}[/tex]

The tension in rope segment AB = [tex]T_{AB}[/tex] = Pulling force of tugboat = 1200 lb

By resolution of forces acting along the line A_F gives;

[tex]T_{BC}[/tex] × cos(26.0°) + [tex]T_{BD}[/tex] × cos(21.0°) = [tex]T_{AB}[/tex] = 1200 lb

[tex]T_{BC}[/tex] × cos(26.0°) + [tex]T_{BD}[/tex] × cos(21.0°) = 1200 lb............(1)

Similarly, we have for equilibrium, the sum of the forces acting perpendicular to tow cable = 0, therefore, we have;

[tex]T_{BC}[/tex] × sin(26.0°) + [tex]T_{BD}[/tex] × sin(21.0°) = 0...........................(2)

Which gives;

[tex]T_{BC}[/tex] × sin(26.0°) = - [tex]T_{BD}[/tex] × sin(21.0°)

[tex]T_{BC}[/tex] = - [tex]T_{BD}[/tex] × sin(21.0°)/(sin(26.0°))  ≈ - [tex]T_{BD}[/tex] × 0.8175

Substituting the value of, [tex]T_{BC}[/tex], in equation (1), gives;

- [tex]T_{BD}[/tex] × 0.8175 × cos(26.0°) + [tex]T_{BD}[/tex] × cos(21.0°) = 1200 lb

- [tex]T_{BD}[/tex] × 0.7348  + [tex]T_{BD}[/tex] ×0.9336 = 1200 lb

[tex]T_{BD}[/tex] ×0.1988 = 1200 lb

[tex]T_{BD}[/tex] ≈ 1200 lb/0.1988 = 6,035.6938 lb

[tex]T_{BD}[/tex] ≈ 6,035.6938 lb

[tex]T_{BC}[/tex] ≈ - [tex]T_{BD}[/tex] × 0.8175 = 6,035.6938 × 0.8175 = -4934.1733 lb

[tex]T_{BC}[/tex] ≈ -4934.1733 lb

From which we have;

The tensions in [tex]T_{BC}[/tex] ≈ -4934.2 lb and  [tex]T_{BD}[/tex] ≈ 6,035.7 lb.

Answer:

The wavelength of the wave is 1 m

Explanation:

Given;

mass of the string, m = 20 g = 0.02 kg

length of the string, L = 3.2 m

tension on the string, T = 2.5 N

the frequency of the wave, f = 20 Hz

The velocity of the wave is given by;

[tex]v = \sqrt\frac{T}{\mu} {}[/tex]

where;

μ is mass per unit length = 0.02 kg / 3.2 m

μ = 6.25 x 10⁻³ kg/m

[tex]v = \sqrt{\frac{T}{\mu} } \\\\v = \sqrt{\frac{2.5}{6.25*10^{-3}} } \\\\v = 20 \ m/s[/tex]

The wavelength of the wave is given by;

λ = v / f

λ = (20 m/s )/ (20 Hz)

λ = 1 m

Therefore, the wavelength of the wave is 1 m

Answer:

high frequent sound

Explanation:

because if its low than its slower.

Answer:

Pluto & Mercury

Explanation:

Pluto's eccentricity is 0.248

Mercury's eccentricity is 0.206

Answer:

(a)  the frequency of the lowest note the piccolo can sound is 571.7 Hz

(b) the distance between adjacent antinodes is 5.72 cm

Explanation:

(a)

Given;

length of piccolo, L = 30 cm = 0.3 m

the speed of sound in air is 343 m/s

The wavelength of a pipe open at both ends, for the first harmonic is given;

L = A → N + N → A

L = λ / 4 +  λ / 4

L = λ / 2

λ = 2L

λ = 2 x 0.3 = 0.6 m

The fundamental frequency (lowest frequency) is given  by;

f₀ = v / λ

f₀ = (343 / 0.6)

f₀ = 571.7 Hz

(b)

Given;

highest note, f = 3000 Hz

the distance between adjacent antinodes is given by;

[tex]d = \frac{v}{2f}\\\\ d = \frac{343}{2*3000}\\\\ d = 0.0572 \ m\\\\d = 5.72 \ cm[/tex]

Answer:

1.) 11 km/s

2.) 9.03 × 10^-5 metres

Explanation:

Given that an electron enters a region of uniform electric field with an initial velocity of 64 km/s in the same direction as the electric field, which has magnitude E = 48 N/C.

Electron q = 1.6×10^-19 C

Electron mass = 9.11×10^-31 Kg

(a) What is the speed of the electron 1.3 ns after entering this region?

E = F/q

F = Eq

Ma = Eq

M × V/t = Eq

Substitute all the parameters into the formula

9.11×10^-31 × V/1.3×10^-9 = 48 × 1.6×10^-19

V = 7.68×10^-18 /7.0×10^-22

V = 10971.43 m/s

V = 11 Km/s approximately

(b) How far does the electron travel during the 1.3 ns interval?

The initial velocity U = 64 km/s

S = ut + 1/2at^2

S = 64000×1.3×10^-6 + 1/2 × 8.4×10^12 × ( 1.3×10^-9)^2

S =8.32×10^-5 + 7.13×10^-6

S = 9.03 × 10^-5 metres

The answer is OPTION B : 73.7 N

Answer:

B

Explanation:

This question is incomplete, the complete question is;

The chilled water system for a 27-story building has a pump located at ground level. The lost head in a vertical riser from the pump to an equipment room on the twenty-seventh floor is 40ft of water, and the pump produces 270ft of head. What is the pressure on the suction side of the pump for a pressure of 8 psig to exist in the riser on the twenty-fifth floor

Assume 12ft of elevation per floor

Answer: 48.68 psig

Explanation:

First  we calculate the elevation of the building

hb = 27 story * 12ft per floor/story

hb =  324 ft

given that the head lost in the vertical riser hL = 40 ft

now the delivery head required in the riser on he 27th floor;

hd = 8 psig *  (2.31 ft / 1 psig)

hd = 18.46 ft

Now calculate the suction head required by balancing the energy per unit weight of water, considering pump as the control volume

hp = (hb + hL + hd) - hs

hs = hb + hL + hd - hp

where hp is the head developed by the pump (270 ft)

hb is the elevation of the 27th floor of the building ( 324 ft)

hL is the head lost in the vertical riser ( 40 ft)

hd is the head required to exist in the riser on the 27th floor (18.46 ft)

so we substitute

hs = 324 ft + 40 ft + 18.46 ft - 270 ft

hs = 112.46

so 112.46ft * (1 psig / 2.31 ft)

= 48.68 psig

Answer:

Have you tried google

Explanation:

Answer:

protect against whisplasg injuries

Answer:

20.1 m/s

Explanation:

Since You are later than usual getting to the stop and see the shuttle pulling away from the stop while you are still 3.9 m behind the bus stop. And In 40.9 m you will reach a barrier and you must catch the shuttle before that point.

Given that the shuttle has a constant acceleration of 4.5 m/s2. 

The total distance to cover is:

Total distance = 40.9 + 3.9 = 44.8 m

Assuming you are starting from rest. Then initial velocity U = 0

Using the 3rd equation of motion to calculate the minimum velocity.

V^2 = U^2 + 2as

V^2 = 0 + 2 × 4.5 × 44.8

V^2 = 403.2

V = sqrt (403.2)

V = 20.1 m/s

Therefore, the minimum velocity you have to run at to catch the bus before it reaches the barrier is 20.1 m/s

Explanation:

This problem is on units conversion

given the dimensions

3.12 ft in length,

0.0455 yd in width and

7.87 inches in height

we have to convert to cm first

3.12 ft to cm=

1 ft-------30.48cm

3.12--------x

x=95.09cm

0.0455 yd to cm

0.0455yd ft to cm=

1 yd-------91.44cm

0.0455--------x

x=4.16cm

7.87 in to cm

1 in-------2.54cm

7.87--------x

x=19.98cm

the volume is =95.09cm*4.16cm*19.98cm

volume= 7907.45cm^3

the volume in gallon is

1 cm^3------0.000264172gal

7907.45cm^3-------x

x=7907.45*0.000264172

x=2.088gallons

Answer:

Hello!

Sorry you haven't put up an image of your question! Without it we can't answer your question!

Explanation:

Maybe put up another one and it'll be answered!

:D

Answer:

The net force should be of a magnitude of 64 N

Explanation:

We use Newton's second Law for this:

[tex]F_{net} = m\,*\,a[/tex]

which for our case gives:

[tex]F_{net} = m\,*\,a=16\,(4)\,N= 64\,\,N[/tex]

Answer:

[tex] \boxed{\sf Distance \ travelled = 12 \ m} [/tex]

Given:

Initial speed (u) = 0 m/s (Accelerates from rest)

Final speed (v) = 8 m/s

Time taken (t) = 3 seconds

To Find:

Distance travelled by cyclist (s)

Explanation:

From equation of motion of object moving with uniform acceleration in straight line we have:

[tex] \boxed{ \bold{s = (\frac{v + u}{2} )t}}[/tex]

By substituting value of v, u & t in the equation we get:

[tex] \sf \implies s = ( \frac{8 + 0}{2} ) \times 3 \\ \\ \sf \implies s = \frac{8}{2} \times 3 \\ \\ \sf \implies s = 4 \times 3 \\ \\ \sf \implies s = 12 \: m[/tex]

[tex] \therefore[/tex]

Distance travelled by cyclist (s) = 12 m

Answer:

s(distance) =36m

Explanation:

u(initial velocity) =0 m/s

a =8 m/s^2

t=3s

s=ut+1/2at^2

s=1/2(8)(3)^2

s=1/2(8)(3)(3)

s=4(9)

s=36m

Answer:

experimental group

Explanation:

please mark me as a brainlist..

Answer:

Experemtial group

Explanation:

The placebo is just sugar pills tested is ones already done and control is a mix of the two

Explanation:

100cm=1m

5 cm= x

cross multiple

x=5/100

=0.05m

There are 0.05 meters in 5 cm. The correct option among the following is option (B).

In the metric system, a centimeter (cm) is a unit of length. It is one centimeter (1 cm = 0.01 m) in size. Small distances or measurements, such as the length, height, or width of items, are frequently measured in centimeters. Due to its practical size for many routine measurements, it is also frequently employed in scientific and mathematical computations.

In the International System of Units (SI), the meter serves as the base unit and is frequently used to measure lengths, heights, and other measurements. It serves as the basic building block for other metric units like centimeters (one meter equals one hundred centimeters) and kilometers (one kilometer equals one thousand meters).

So, to convert 5.0 cm to meters:

5.0 cm ÷ 100 = 0.05 m

Hence, 5.0 cm is equal to 0.05 meters. The correct option is (B).

To learn more about meters, here:

https://brainly.com/question/13187866

#SPJ4

they get their energy from photosynthesis, so the answer would be (B) the sun

Answer:

[tex]Velocity = \frac{s(8)}{8}[/tex]

Explanation:

Given

[tex]0 \leq t \leq 12[/tex]

Required

Determine the velocity when t = 8

This type of velocity is referred to as an instantaneous velocity.

In this case, it is calculated using

[tex]Velocity = \frac{Distance\ at\ 8 second}{t = 8}[/tex]

Given that s(t) models the distance;

s(8) = distance at 8 seconds

So;

[tex]Velocity = \frac{s(8)}{8}[/tex]

Option B answers the question

Answer:

Acceleration /Speed

Explanation:

An objects Velocity can be determined by acceleration,

Please pay attention in your middle school class, speed and velocity quiz.

Answer:  Heterogenous mixture

Explanation:

A heterogeneous mixture in which the components of the mixture are not evenly mixed or uniform, allowing one to identify the different constituents of each components and enable the mixture to be separated physically.

Examples of heterogeneous mixtures includes

-- sand and nails

---rice and beans

--- water and oil

Another type of mixture is the homogeneous mixture in which all the components are evenly mixed causing that each components cannot be visible with the eye and therefore separated chemically.

Answer:

Control groups let the one who is expermenting compare  the effect of the varibles in the expermental group.

Explanation: