Two hockey pucks with mass 0.1 kg slide across the ice and collide. Before
the collision, puck 1 is going 15 m/s to the east and puck 2 is going 12 m/s to
the west. After the collision, puck 2 is going 15 m/s to the east. What is the
velocity of puck 1?

Answers

Answer 1

Answer:

Puck 1 = 12 m/s

Explanation:

Conservation of energy

KE_1a + KE_2a = KE_1b + KE_2b

(1/2)(0.1kg)(15m/s)^2 + (1/2)(0.1kg)(12m/s)^2 = (1/2)(0.1kg)(V)^2 + (1/2)(0.1kg)(15m/s)^2

V = 12m/s

Answer 2

Answer:

12 m/s west

Explanation:

just did it

Two Hockey Pucks With Mass 0.1 Kg Slide Across The Ice And Collide. Beforethe Collision, Puck 1 Is Going

Related Questions

Deshaun Watson launches a football at a speed of 24.7 ms and an angle of 33° above the horizontal How far down
the football field does the football land? What is the max height the football reaches during flight?
Show work

Answers

Answer:

9.23m

Explanation:

Max height = u²sin²theta/2g

u is the speed = 34.7m/s

theta is the angle of elevation = 33°

g is the acceleration due to gravity = 9.8m/s²

Substitute into the formula

Max height = 24.7²sin²33/2(9.8)

Max height = 610.09sin²33/2(9.8)

Max height = 610.09(0.29663)/19.6

Max height = 180.97/19.6

Max Height = 9.23m

Hence the max height the football reaches during flight is 9.23m

A boat is drifting to the right with a speed of 5.0 m/s when the driver turns on the motor. The motor runs for 6.0 seconds causing a constant leftward acceleration of magnitude 4.0 m/s squared. What is the displacement of the boat over the 6.0 second time interval?

Answers

Answer:

[tex]D= -0.42km[/tex]

Explanation:

From the question we are told that

Drifting right with speed 5.0m/s

The motor runs for 6.0 seconds

Leftward acceleration of magnitude 4.0 m/s squared

Generally the equation [tex]V=ut+1/2at^2[/tex] can be used here

[tex]V=ut+1/2at^2[/tex]

Mathematically solving with the newton equation above we have that

   [tex]D=5*6 + \frac{1}{2} (-4)*6^2[/tex]

   [tex]D=30-72[/tex]

   [tex]D=-42m[/tex] [tex]or -0.42km[/tex]

Therefore having this the Displacement is [tex]D= -0.42km[/tex] leftward


Define friction. Prove that tangent of angle of friction is equal to coefficient
of friction.​

Answers

Answer:

Friction is the force that opposes movement between moving objects.

The angle at which one object starts to slip on the other is directly related to the coefficient. When the two objects are horizontal there is no frictional force. So, the coefficient of static friction is equal to the tangent of the angle at which the objects slide. A similar method can be used to measure μk.

Explanation:

Answer:

brainliest plsssssss

Explanation:

The resistance that one surface or object encounters when moving over another

Marvin the Martian needs to get back home. Marvin is 321,770 m from his home on Mars. He decides the quickest way to get home is to use his canon to fire himself into flight. He aims the the canon at an angle of 25 degrees. When the canon is fired Marvin the Martian is launched into flight at an initial velocity of 1250 m/s. The question is will his plan work

Answers

Answer:

y = 14238 m.    the height of the rocket is much less than this distance therefore the plan will not work.

Explanation:

Let's analyze this exercise, so that the Martian's plan works, the vertical height of the body must be zero when it is more than half of the way to the planet Mars, this is so that Mars attracts it and can arrive.

Let's calculate the maximum height of the launch

          [tex]v_{y} ^2 = v_{oy}^2 - 2 g y[/tex]

at the highest point [tex]v_{y}[/tex] = 0

          y = v_{oy}² / 2g

          y = (v₀ sin θ)² / 2g

let's calculate

          y = (1250 sin 25)² /2 9.8

          y = 14238 m

In the exercise, indicate that the distance to Mars is h = 321770 m, half of this distance is

          h / 2 = 160885 m

therefore the height of the rocket is much less than this distance therefore the plan will not work.

The height reached is low, so it is not necessary to take into account the variation of g with height

How will a metal container full of hot water in vaccum lose heat?​

Answers

Hey I hope you had some fun with me I love y’all so I’m gonna have a great time with your friends and I love y’all too babe I hope you have some great time love y’all babe I hope you have some great time love y’all love love?

Select the correct answer.
Which of these factors will increase the speed of a sound wave in the air?
A. slowing down the movement of particles in the air
B. raising the temperature of the air
C. removing particles form the air
D. decreasing the kinetic energy of the air
E. stopping particle collisions in the air

Answers

Answer:

B

Explanation:

But molecules at a higher temperature have more energy.

Answer: B. Raising the temperature of the air

write the difference between convert and
Concave minores​

Answers

A concave mirror is opaque whereas a concave lens is transparent. ... Difference between concave mirror and concave lens is A concave mirror is opaque whereas a concave lens is transparent. A concave mirror causes reflection of light whereas a concave lens causes refraction of light.

Q2. You push a crate up a ramp with a force of 10 N. Despite your pushing, the crate slides down the ramp 4 m. How much work did you do

Answers

Answer:

40 J

Explanation:

From the question given above, the following data were obtained:

Force (F) = 10 N

Distance (s) = 4 m

Workdone (Wd) =?

Work done is simply defined as the product of force and distance moved in the direction of the force. Mathematically, we can express the Workdone as:

Workdone = force × distance

Wd = F × s

With the above formula, we can obtain the workdone as follow:

Force (F) = 10 N

Distance (s) = 4 m

Workdone (Wd) =?

Wd = F × s

Wd = 10 × 4

Wd = 40 J

Thus, 40 J of work was done.

Help! Help!

___ are a primary way to discourage drinking and driving.
A. High prices for alcohol
B. Scare tactics
C. Laws

Answers

Answer:

Laws

Explanation:

Laws are a primary way discourage drinking and driving

A primary way to discourage drinking and driving is Law.

What is drinking and driving?

The person who takes in alcohol and then drives on the road. This is strictly prohibited.

Laws against the  'drinking and driving' will make people get scared of getting charged or sentenced to jail for some years. Lot of accidents have caused when there were no laws against the action.

Thus, Laws are a primary way to discourage drinking and driving.

Learn more about drinking and driving.

https://brainly.com/question/11317786

#SPJ2

The least count of stopwatch is 0.2s.The time of 20 oscillations of a pendulum was measured to be 25s.Find the percentage error in the measurement of time​

Answers

Answer:

0.8%

Explanation:

We are given;

Number of oscillations; n = 20

Time taken; t = 25 s

Formula for period of oscillation;

T = t/n = 25/20 = 1.25 s

We are told that the least count is 0.2 s. Thus, error is; ΔT = 0.2 s

percentage error in the measurement of time is given by;

(0.2/(20 × 1.25)) × 100% = 0.8%

An automobile which set the world record for acceleration increase speed from rest to 96 km/h in 3.07 seconds what distance traveled by the time the final speed was achieved

Answers

Answer:

41.02m

Explanation:

Given parameters:

Initial velocity = 0m/s

Final velocity  = 96km/hr

Time taken  = 3.07s

Unknown:

Distance traveled by the time the final speed was achieved = ?

Solution:

To solve this problem, we first find the acceleration of the car;

     Acceleration  = [tex]\frac{v - u }{t}[/tex]

v is the final velocity

u is the initial velocity

t is the time taken

  Now convert the the final velocity to m/s;

          96km/hr to m/s;

               1 km/hr  = 0.278m/s

               96km/hr  = 96 x 0.278 = 26.7m/s

Now;

 Acceleration  = [tex]\frac{26.7 - 0}{3.07}[/tex]   = 8.69m/s²

So;

   v²  = u²  + 2as

v is the final velocity

u is the initial velocity

a is the acceleration

s is the distance

             26.7²  = 0²  + 2 x 8.69 x s

             712.89  = 17.38s

                  s  = 41.02m

A student is creating an electromagnet for an investigation. Which feature of the electromagnet will least influence the magnetic force?
A
the material of the core
B
the brand of the battery
С
the number of wire coils
D
the che of the power source

Answers

C the number of wire coils

A horizontal force of 90.7 N is applied to a 40.5 kg crate on a rough, level surface. If the crate accelerates at 1.08 m/s, what is the magnitude of the force of kinetic friction (in N) acting on the crate?

Answers

Mhide,

if the mass of 60 kg is having an acceleration of 1.2 m/s², we have:

F = m . a

60 x 1.2 = 72 N

That is, the resultant force is 72 newtons.

If the applied force is 95 N, we come to the conclusion that 95 - f = 72

Or,

f = 23 newtons, or 23 N, of kinetic friction.

Determine the absolute pressure on the bottom of a swimming pool 30.0 mm by 8.4 mm whose uniform depth is 1.9 mm .

Answers

Answer:

=101343.62N/m^2

Explanation:

absolute pressure on the bottom of a swimming pool= atmospheric pressure +( 2 ×ρ ×g)

( 2 ×ρ ×g)= guage pressure

atmospheric pressure= 101325pa

h= height= 1.9 mm = 1.9×10^-3m

ρ = density of water

= 1000kg/m^3

g= acceleration due to gravity= 9.8m/s^2

Then substitute, we have

absolute pressure on the bottom of a swimming pool= 101325+ [0.0019 ×1000 × 9.8)]

=101343.62N/m^2

Hence, the absolute pressure on the bottom of a swimming pool is =101343.62N/m^2

A(n) 636 kg elevator starts from rest. It moves upward for 4.5 s with a constant acceleration until it reaches its cruising speed of 2.05 m/s. The acceleration of gravity is 9.8 m/s 2 . Find the average power delivered by the elevator motor during this period. Answer in units of kW.

Answers

Answer:

The average power delivered by the elevator motor during this period is 6.686 kW.

Explanation:

Given;

mass of the elevator, m = 636 kg

initial speed of the elevator, u = 0

time of motion, t = 4.5 s

final speed of the elevator, v = 2.05 m/s

The upward force of the elevator is calculated as;

F = m(a + g)

where;

m is mass of the elevator

a is the constant acceleration of the elevator

g is acceleration due to gravity = 9.8 m/s²

[tex]a = \frac{v-u}{t} \\\\a = \frac{2.05 -0}{4.5} \\\\a = 0.456 \ m/s^2[/tex]

F = (636)(0.456 + 9.8)

F = (636)(10.256)

F = 6522.816 N

The average power delivered by the elevator is calculated as;

[tex]P_{avg} = \frac{1}{2} (Fv)\\\\P_{avg} = \frac{1}{2} (6522.816 \ \times \ 2.05)\\\\P_{avg} = 6685.89 \ W\\\\P_{avg} = 6.68589 \ kW\\\\P_{avg} = 6.686 \ k W[/tex]

Therefore, the average power delivered by the elevator motor during this period is 6.686 kW.

What 2 factors do you need in order to calculate speed?

Answers

Answer:

Distance and time.

Explanation:

Speed=Distance/time

The two factors which we need in order to calculate the speed of an object are the distance covered by the object and the time taken to cover that distance.

What is Speed?

Speed is the rate of change of position of an object in any direction. Speed is a scalar quantity as it has only magnitude and no direction. It is measured as the ratio of the distance covered by an object to the time taken in which the distance was covered by that object.

Speed has the dimension of distance covered by the time taken. Thus, the SI unit of speed is the combination of the basic units of distance and the basic unit of Time. Thus, the SI unit of speed is meter per second (m/s).

Learn more about Speed here:

https://brainly.com/question/28224010

#SPJ6

which of the following is not a mechanical form of energy?
a. Nuclear
b. Kinetic
c. Spring potential
d. Gravitational potential ​

Answers

Answer:

The answer is Spring Potential

Explanation:

Because all the others are a mechanical form of energy

The device shows the relative humidity at 22°C. What’s the water vapor density if the maximum water vapor in air at this temperature is 20 grams/cubic meter?
A device showing that at 22 degrees Celsius the relative humidity is 58%.

Answers

Answer:

The answer would be 11.6 g/m^3

Explanation:

Knowing that vapor's density at 100% humidity is 20g/m^3 we can calculate the answer using the following math:

0.58 * 20 = 11.6 grams per cubic meter

the units can also be written as g/m^3

The density of water vapor is 11.6 grams/cubic meter.

What is relative humidity?

The quantity of atmospheric moisture that is present compared to the amount that would be there if the air were saturated is known as relative humidity, and it is stated as a percentage. Relative humidity depends on both moisture content and temperature because the latter quantity is temperature-dependent. The related temperature and dew point for the specified hour are used to calculate relative humidity. it is expresses as %.

Now given that the maximum water vapor in air at this temperature is 20 grams/cubic meter at 22°C, that is, density of vapor at 100% humidity is 20g/[tex]m^3[/tex]  at 22°C.

And, The device showing that at 22 degrees Celsius the relative humidity is 58%

So, water vapor density at that moment is = 20g/[tex]m^3[/tex] × 58%

= 11.6 g/[tex]m^3[/tex] .

= 11.6 grams/cubic meter.

Hence, according to the measurement of device, the water vapor density is 11.6 grams/cubic meter.

Learn more about relative humidity here:

https://brainly.com/question/22069910

#SPJ2

Optimus Prime is flying straight up at 24 m/s when he accidentally drops his mega-ray blaster and it falls 94 m to the ground below. Calculate how long it takes for his mega-ray blaster to hit the ground.

Answers

Answer:

The time it will take the mega-ray blaster to hit the ground is 2.57 s.

Explanation:

Given;

initial velocity of Optimus Prime, u = 24 m/s

height of fall of the mega-ray blaster, h = 94 m

The time of fall of the mega-ray blaster is calculated using the following kinematic equation;

[tex]h = ut + \frac{1}{2}gt^2\\\\94 = 24t + \frac{1}{2}(9.8)t^2\\\\94 = 24t + 4.9t^2\\\\4.9t^2 +24t -94 = 0\\\\Use \ formula \ method \ to \ solve \ for \ "t"\\\\a = 4.9 , b = 24, c = -94\\\\t = \frac{-b \ +/- \ \sqrt{b^2 -4ac} }{2a} \\\\t = \frac{-24 \ +/- \ \sqrt{(24)^2 -4(-94 \times4.9)} }{2(4.9)} \\\\t = \frac{-24 \ +/- \ \sqrt{2418.4} }{9.8}\\\\t = \frac{-24 \ +/- \ 49.177 }{9.8}\\\\t = \frac{-24 \ +\ 49.177 }{9.8} \ \ or \ \ t = \frac{-24 \ -\ 49.177 }{9.8} \\\\[/tex]

[tex]t = 2.57 \ s \ \ or \ \ t = -7.47 \ s[/tex]

t = 2.57 s

Therefore, the time it will take the mega-ray blaster to hit the ground is 2.57 s.

1. A 75.0 kg man pushes on a 500,000kg wall for 250s but it does not move. How
much work does he do on the wall?

Answers

Answer:

0J

Explanation:

No work is being done on the wall by the man pushing on it.

 Given parameters:

Mass of man  = 75kg

Mass of wall  = 500000kg

Time  = 250s

Unknown:

Work done  = ?

Solution:

Work done is the force applied on a body that moves it along a particular path.

For work to be done, distance must be move or displacement must occur.

Since the wall is not moving the distance is 0;

    Work done  = Force x distance

Since distance is 0m, work done is 0J

The work done on the wall by the man is 0 J.

To calculate the amount of work done by the man, we use the formula below.

Formula:

W = (ma)d............. Equation 1

Where:

W = Work done on the wall by the manm = mass of the walla = acceleration of the walld = distance.

from the question,

Given:

m = 500000 kga = 0 m/s² (not moving)d = 0 m.

Substitute these values into equation 1

W = 500000(0)(0)W = 0 J.

Hence, the work done on the wall by the man is 0 J.

Learn more about work done here: https://brainly.com/question/8119756

What happens to most of the light waves that strike a clear pane of glass? O A. absorption B. diffraction O C. reflection O D. transmission​

Answers

slight reflect but most goes through because glass is transparent

Most of the light waves that strike a clear pane of glass reflects. Details about reflection can be found below.

What is reflection?

Refection in physics is the property of a propagated wave being thrown back from a surface such as a mirror.

Mirror is an example of an object that could be hit by an incumbent wave, however, most of the light waves that hit the mirror surface gets reflected back.

Therefore, most of the light waves that strike a clear pane of glass reflects.

Learn more about refection at: https://brainly.com/question/15487308

#SPJ2

let's say you hypothetically ran over someone with your car, and they are now under your car in between the front wheels and the back wheels, right, and they're stuck as in can't breathe type stuck, right, do you keep driving so they can breathe or do you let them chill under your car?
just curious...​

Answers

question: is this actually hypothetical?

Explanation:

also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .

Answer:

the same thing the last guy said

( I will give a brainliest )
What must be changed, temperature or heat energy, during condensation?

Answers

Answer:

The answer is temperature lol

Explanation:

:)

The metal wire is stretched so that its cross-section is still circular but its total length is now 10 meters. What is the resistance of the wire after stretching

Answers

I don’t know I think about 20 meters but I’m probably wrong I just need to do this so someone can answer my question

If the angle between two forces increases, the magnitude of their resultant-
A Decreases
C. Remain unchanged
D. Decrease than decreases​

Answers

A is the answer to your question

An inductor with an inductance of .5 henrys (H) is to be connected to a 60 Hz circuit. What will the inductive reactance (X L) be

Answers

Answer:

1885.2 ohms

Explanation:

Step one:

given data

L=5H

f=60Hz

Required

The inductive reactance of the inductor

Step two:

Applying the expression

XL= 2πfL

substitute

XL=2*3.142*60*5

XL=1885.2 ohms

Use the graph and the table above to complete the table by estimating the amount of energy transferred near location B.

A.
1600 kilojoules

B.
300 kilojoules

C.
800 kilojoules

D.
400 kilojoules

E.
3200 kilojoules

Answers

Answer:

A. 1600 kilojoules

Explanation:

Looking at the graph, at 4 meters, we can guess the energy transferred would be around 1500 kilojoules. 1600 kilojoules is the closest to that value, so A would be the best choice.

Which type of telescope is best used to detect distant planets?​

Answers

I believe the answer would be, refractor type telescopes because these are best used for planetary observations.

What type of telescope did Galileo use to observe Jupiter?

reflector telescope
refractor telescope
radio telescope
latter telescope

Answers

Answer:

a refractor telescope

Explanation:

Answer:

a. refractor telescope

14. After finishing her homework, Sue climbs up a 5.00 m high flight of stairs to her bedroom
Find the magnitude of Sue's weight
and how much
work Sue does in climbing the stairs if she
has a mass of 50.0 kg? (4.90 x 2 N, 2450J)

Answers

Explanation:

Given parameters:

Height  = 5m

Mass of Sue  = 50kg

Unknown:

Magnitude of Sue's weight  = ?

Work done by Sue = ?

Solution:

Weight is the vertical force exerted by a body in the presence of gravity.

Mathematically;

        W = mg

m is the mass

g is the acceleration due to gravity  = 9.8m/s²

  Weight  = 50 x 9.8  = 490N

Work done  = Force x distance = weight x height

 Work done  = 490 x 5 = 2450J

Other Questions
explain the problems inherent in a barter economy and describe why these problems were solved by the use of coinage as a medium of exchange The rate at which a stars burns its fuel (gas) is based on the star'sMassVolume Shape Color write a paragraph to describe a time when you collaborate with apartner or a group on a project in school. It does not have to be regarding math.Describe the project and your experience working with a team. What were thepros and cons? Do you prefer to work in a group or by yourself. The _____ Tag surrounds all content that will be visible on your web page for all to users to see on that website. Find the value of x Id appreciate if you could explain as well if not thats fine ASAP PLEASE HELP ME!!!!!How do you feel about this reading Pro-Trump Mob storms US Capitol?What question do you have after reading Pro-Trump Mob storms US Capitol? Answer -10 (-2) = please helpisolate x in x+3y=1 What type of mutation is shown in the example below?Original DNA: ATCGTCGTCGTMutated DNA: ATCGTCGTGT A SWOT analysis provides organizational strategists with key information and a realistic assessment and understanding of both the internal and external environments. This activity is important because a SWOT analysis is a useful tool in gathering information about the competitive environment to establish a grand strategy.The goal of this exercise is to challenge your knowledge of SWOT analysis. Wrtie down the most appropriate area of the SWOT analysis for each item.1. The R&D program at the company produces world-class products 2. Our product is targeted to young professionals under 35 years of age. That group is growing. 3. The equipment the company owns is last generation and does not have the latest technology, 4- There have been several up and coming companies that are beginning to enter our market space, 5. Word is that a new highway is being built in the next couple of years. making it easier to transport our products from the factory. 6. The employees who work for us are highly skilled and leaders in their field. 7. Management does not provide a big budget to support the world-class staff that work for the company. g. The company uses a fair amount of short-term debt financed through the bank. Economic projections indicate that interest rates may rise in the future and credit will be more difficult to obtain what is the slope of the graph of the equation 4x - 6y=2?A.-4B.-1C.2/3D.3/2 WHICH OF THE FOUR COMPOUNDS HAS BONDS WITH THE GREATEST DEGREE OF POLARITY (MOST POLAR)? PLEASE HELP THIS IS TIMED!!!! I WILL GIVE BRAINLIESTTTTTTThe table below represents a linear function f(x) and the equation represents a function g(x):x f(x)1 30 01 3g(x) g(x) = 7x + 2Part A: Write a sentence to compare the slope of the two functions and show the steps you used to determine the slope of f(x) and g(x). (6 points)Part B: Which function has a greater y-intercept? Justify your answer. (4 points)(10 points) Help I will mark brainliestttt The_______is a theme in the Gospel of Mark that portrays the disciples and others as recognizing Jesus' identity as the MessiahJesus directed them not to tell anyone else. What role did the government play in the chinese industrial revolution A dog starts at position x=2.50m, and undergoes a displacement of 8.25m. What is its final position? a quadrilateral has 2 angles that measure 100 and 60 degrees the other angles have a ratio of 3:17 . what are the measures of those angles? Now that you have worked through a lot of material that includes these basic patterns, and you have compared grammatically correct and incorrect sentences, write down what you think is a rule that could explain what makes a sentence grammatically correct or not. For example, you might write something like: "verbs always match nouns in number, and they usually come before the noun." In other words, make your best guess for the grammar rule that makes sense out of the pattern(s) you see in the phrases you have been working with. Review if you need to, and you might briefly check your hunches against the sentences you have been working with in this or previous modules. Keep in mind that what you're after is your hunch, not a grammar rule from a text book. Now check your hunch with the explanation of this principle in the following pattern. A common question you'll need to answer is "What is the relationship between the independentvariable) and (the dependent variable)?" In other words, as you change the variable that you'retesting, what is the outcome?- So in this case, what is the relationship between time and the diameter of the trees?HELP PLZZZZZ