Principle: Orbital size & main energy level
Angular: Orbital shape
Magnetic: Orbital orientation
Orbital size is Principle; main energy level is Principle; shape is Angular; orientation is Magnetic
Principle:
imagine a bullseye. each ring shows how far its from the nucleus
Angular:
0 looks like circle
1 looks like a bowtie
2 looks like a flower or 4 leaf clover
3 looks like multiple lobes
Principle Quantum Number: It describes the size of the orbital and the main energy level. It is represented by n. Where, n = 1,2,3,4....stands for K, L, M, N shell and so on..
Angular momentum Quantum Number : It describes the shape of the orbital. It is represented as 'l'. The value of l ranges from 0 to (n-1). For l = 0,1,2,3... the orbitals are s, p, d, f...
Magnetic Quantum Number : It describes the orientation of the orbitals. It is represented as . The value of this quantum number ranges from . When l = 2, the value of will be -2, -1, 0, +1, +2.
https://brainly.com/question/16979660
MATH AND SCIENCE
Out of around 260,000 known species of angiosperms, approximately 195,000 are dicots. what percentage of angio sperms are dicots
Answer:
Explanation:
Formula
% = (dicots/angiosperms) * 100
Givens
angiosperms (total) = 260000
Dicots = 195000
Solution
% = (195000/260000) * 100
% = 0.75 * 100
Answer: % = 75% are dicots
345.50 grams of C6 H12 O6 = how many mol C6H12O6 ? - (MM=180.16g/mol).
100.0grams of O2 = how many mol O2? - (MM=32.00g/mol).
14.37 moles of AgNO3 = how many grams AgNO3? - (MM= 169.87g/mol).
Answer:
0.56 M
Explanation:
We are given;
Mass of glucose solute is 50.50 g
Volume of solution is 500 mL
We are required to calculate the concentration of glucose.
We need to know that, molarity is the concentration of a solution in moles per liter.
Molarity = Number of moles ÷ Molar mass
Hi
Can someone explain the second marking point?
Why is it bubbles of air and not C02?
If I add 30mL of water to 125mL of a 0.15M of NaOH solution, what will the molarity of the dilated solution be?
Answer:
.12 M
Explanation:
.15 M / L * .125 L = .01875 Moles
now add 30 ml for total 155 ml = .155 L
.01875 M / .155 L = .12 M
Which one of the following pairs of atoms would form a non-polar covalent bond?
a. Cl and C1
b. Na and Cl
C. C.and o
d. N and O
As a solution becomes more basic:
This is my question
Answer:
[tex] \\ [/tex]
refer the three attached images for the respective answers.
hope helpful ~
Balance the following equation.
( ? )NaCl + ( ? ) AgNO3 → ( ? ) AgCl + ( ? ) NaNO3
Balanced equation:
NaCl + ( 1 ) AgNO₃ → ( 1 ) AgCl + ( 1 ) NaNO₃
(aq) (aq) (s) (aq)
Both the sides are already balanced
Calculate the volume that 3.
60g H2 gas will occupy at stp
Answer:
mass over molarmass ×volume
90
Which statement best predicts and explains the product of a single displacement reaction when the cation (A) with an oxidation number of +2 and an anion (B) with the oxidation number of -3 react and form a compound?
A+2B-3 is the predicted formula when each metal cation has a charge of +2 and each non metal has a charge of -3.
B2A3 is the final formula for the metal anion bonding to the non-metal cation in a 2:3 ratio.
A3B2 is the predicted formula with an overall charge of the compound being zero and each atom has 8 valence electrons in their outermost electron shell.
A3B2 is the predicted formula is made when each metal cation gains three electrons from the anion while each nonmetal loses 2 electrons to each of the cations.
The statement that best predicts and explains the product of a single displacement reaction is ; ( C ) A3B2 is the predicted formula with an overall charge of the compound being zero and each atom has 8 valence electrons in their outermost electron shell.
Octet stateGiven that the oxidation number is +2 shows that it will be an octet when it donates its 2 electrons. also for octet B it will become complete when it accepts 3 electrons. Therefore in order to balance out the octet of each atom is by cross multiplying to get A3B2.
Hence we can conclude that The statement that best predicts and explains the product of a single displacement reaction is ; A3B2 is the predicted formula with an overall charge of the compound being zero and each atom has 8 valence electrons in their outermost electron shell.
Learn more about Octet state : https://brainly.com/question/865531
Why can’t sodium metal be manufactured by the electrolysis of brine?
Answer:
Explanation:
The quick and short answer to this question is that the moment it is made into Na (the atom) the moment that happens, Na will react with water to become NaOH. Sodium is very responsive to water.
Equation
2Na + 2HOH ====> 2NaOH + H2
What’s the answer?????? I accidentally clicked the 1st one.
Answer:
its the 1st one at the top
Quantity of atoms in .3521 mol in ZrSiO4
Answer:
look the image
Explanation:
if you observe a first quarter on January 3 on what date will you see a full moon?
if you observe a first quarter on January 3, the date will you see a full moon is on February 1st.
What is the full moon about?The lunar phase during which the Moon is completely illuminated from Earth's perspective is known as the full moon. When Earth is situated halfway between the Sun and the Moon, this happens. This indicates that the near side of the moon, which faces Earth, is fully illuminated by the sun and appears as a roughly circular disk.
The Moon is a symbol for both the emotional and physical bodies. The full Moon is a time to be open and receive the spirit's light and awareness into your physical, emotional, and mental bodies
It takes 29 day, to get to the full moon. This will be:
= January 3 + 29 days
= February 1st
Learn more about moon on:
https://brainly.com/question/12676209
#SPJ1
What is the numbers of molecules for 65.8g of CO2?
Answer:
8.98*10^23 molecules CO2
Explanation:
The molar mass of CO2 is 44.0 grams/mol. If we convert 65.8 grams of CO2 into moles, 65.8g CO2 / 44.0g CO2 then we get about 1.49 moles of CO2. We know there are 6.02*10^23 molecules in a mole, so we would just multiply 1.49 mol CO2 * 6.02*10^23 = 8.98*10^23
HELPPPPP
54.5 g of Ca(NO3)2 was used to create a 1.5 M solution. What is the volume of the solution in ml?
We have already been introduced to solutions. Several chapters ago molarity (M) was introduced. Molarity is measured in moles per liter, or mol/L. A 0.30 M NaCl solution means that there is 0.30 mol NaCl in every liter of solution.
Often chemists have to make solutions; so, doing the calculations necessary to make a certain amount of solution become second nature.
For example:
Make 250 mL of a 0.30 M NaCl solution.
To make the solution we need to calculate the amount of NaCl to dissolve to make 250 mL of solution.
start with 250 mL
The solution is made by adding 4.38 g NaCl to a 250-mL volumetric flask. About 100 mL of water are added and when all the NaCl dissolves water is added up to the line on the volumetric flask.
But molarity is not the only unit we use; so, we need to be able to convert between different units...
Common units of concentration include
<==> <==><==>
% wt.
% vol
molarity (M)
molality (m)
mol fraction
That is, the mol fraction of "a" is the number of moles of "a" present divided by the total number of moles of material in the solution (including the solvent).
There is no simple formula for converting from one concentration unit to the next. In general the first step is to pick a convenient sample size. Then work to change each part of the concentration unit to the new unit. Do not try to do the conversion all at once.
For example,
HCl comes in bottles marked 37 % HCl by weight. The density of the solution is 1.200 g/cm-1. What is the molarity of the solution?
A conveneint sample size is 100 g of solution; convenient because 100 g x 37% = 37 g HCl.
This is the key...you must know the definitions for all the concentration terms
First, convert number of grams of HCl in your sample to number of moles in your sample (the 100 g of solution).
Second, convert g of solution to L of solution.
Third, divide moles by liters and you have molarity.
What is the molality of this solution?
Going from M to m. Since the concentration is in M a convenient sample size is 1 L.
OK, so the first conversion is not a conversion...there are 12 mol HCl present in 1 L of solution.
The second conversion is not as easy as it first appears. Let's use the density of the solution to perform a conversion from volume to mass.
This is NOT the mass that is used in molality. We just determined the mass of the solution; molality uses the mass of the SOLVENT!
The solution is made of a solvent and a solute. So, the mass of solvent can be found by subtracting the mass of the solute from the mass of the solution.
Which of the following potential ligands can form a maximum of two bonds to a metal
ion?
(a) C2042
(b) EDTA
(C) porphine
(d) CO32-
(e) both (a) and (d)
Based on the potential ligands given, C2O42- and CO32- can form a maximum of two bonds to a metal
ion.
What are ligands?Ligands are ion or molecule that binds to a central metal atom to form a coordination complex.
Ligands are essential in many biological and enzyme complexes.
From the potential ligands given;
C2O42- can form can form a maximum of two bonds to a metal ionCO32- can form two a maximum of two bonds to a metal ionEDTA can form five to six bonds to a metal ionPorphine can form one bond to a metal ionTherefore, the potential ligands, C2O42- and CO32- can form a maximum of two bonds to a metal
ion.
Learn more about ligands at: https://brainly.com/question/24657736
Choose the answer that describes the hierarchy among these three body regions.
A. The oral region is part of the facial region, and the facial region is part of the cephalic region.
B. The cephalic region is part of the facial region, and the facial region is part of the oral region.
C. The cephalic region is part of the facial region, and the facial region is part of the manual region.
D. The oral region is part of the cephalic region, and the cephalic region is part of the facial region.
Answer:
letter: B
Explanation:
thats is the true answer.
pleas heart my heart my answer
Metallic bonds are formed from the sharing of valence electrons.
O A. True
OB. False
SUBMIT
Answer:
A. True
Explanation:
A metallic bond is a type of chemical bond formed between positively charged atoms in which the free electrons are shared among a lattice of cations. In contrast, covalent and ionic bonds form between two discrete atoms. Metallic bonding is the main type of chemical bond that forms between metal atoms.
2.1 Interpret the results based on your understanding. Indicate deficiencies and excesses. (20)
2.2 How will you correct the deficiencies and/or excesses found in this soil?
Soil nutrients are minerals which are required for growth either small or relatively large quantities
What are soil minerals?Soil minerals are the metallic and non-metallic nutrients found in the soil which are required by plants for growth.
Based on plants requirements, the major nutrients are nitrogen, phosphorus and potassium.
Plants also require other nutrients like copper, zinc, sulfur, iron, etc., in smaller quantities.
Based on the results of the soil test:
The deficiencies nutrients are copper and potassium The excess nutrients are phosphorus, sulfur, iron and zincThe deficiencies and excesses can be corrected by selectively reducing the application of the excess soil nutrients and addition of the deficient nutrients.
Learn more about soil nutrients at: https://brainly.com/question/8901446
Its chemical formula is C17H19NO3. What percent, by mass, is carbon in this compound?
9. Compound A, with molecular formula C5H₁2 has only 1° and 4° carbons. What is its structure? Its other isomer has only 1°, 2° and 3° carbons. What is its structure also?
draw the structure
Answer:
Ok giv me a min
Explanation:
One-fourth of a gaseous mixture is Argon and 3/4 of the gas is Oxygen. The total pressure in the container
is 8 atmospheres. What is the partial pressure of the Argon?
Answer:
nose
Explanation:
xde
The two main types of weathering are
a
mechanical and physical
b
physical and kinetic
c
chemical and physical
d
chemical and acidic
Answer:
c. chemical and physical
Can I get answer to both of those questions
(ii) Explain why magnalium is harder than aluminium.
Answer:
Magnalium is stronger than aluminium alone but still has a low density.
Explanation:
What is the molarity of a solution formed from 0.625 moles of NaCl with a total volume of 250 mL
Answer:
2.5 M
Explanation:
.625 M / .250 Liter = 2.5 M
Question 1 (2 points)
Calculate the following and provide the answer rounded off to the correct accuracy.
2.150 x 102 cm + 7.34 x 102 cm - 3.2 x 102 cm
X
Answer Instructions:
– For a decimal, use (.) and not (.).
As
Note: Your answer is assumed to be reduced to the highest power possible.
The solution to the polynomial expression since the power of the variable is in the second degree is 6.29 × 10² cm
What is the power of a variable?The power of a variable refers to the exponent of the variable and the highest power of a variable is the degree to which the variable is being raised. From the information given, the highest power of the variable is a polynomial.
Given that:
[tex]\mathbf{= 2.150 \times 10^2 \ cm + 7.34 \times 10^2 \ cm - 3.2 \times 10^2 \ cm }[/tex]
So, since the exponents are in the same power we are going to add them all together multiplied by their exponent.
i.e.
[tex]\mathbf{= (2.150 + 7.34 - 3.2) \times 10^2\ cm }[/tex]
[tex]\mathbf{= 6.29 \times 10^2\ cm }[/tex]
Learn more about the power of a variable here:
https://brainly.com/question/2495761
What are renewable resources?
Answer:
Renewable sources are something that can be renewed like
Plants
Trees
etc
uh
Explanation:
Non-renewable for example is you cant renew them at all
there built by the earth themselfs
Like
cole
gemstone
Steel
Metal
etc
How to pay taxes I MEAN
Explain the four basic types of chemical reactions. Be sure to include a sample equation for each type.
Acid Base reaction (Neutralization reaction)
it is the reaction between acid and base which neutralize each other to give salt and water.
example: Hydrochloric acid + Sodium hydroxide --------> sodium chloride + water
HCl + NaOH--------> NaCl + H2O