Answer:
112.63km/hr
Explanation:
The given dimension is :
70mph
We are to convert this to km/hr
1 mile = 1.609km
so;
70mph x 1.609 = 112.63km/hr
So,
The solution is 112.63km/hr
The second law of thermodynamics imposes what limit on the efficiency of a heat engine?
A. The energy a heat engine must deposit in a cold reservoir is greater than or equal to the energy it extracts from a hot reservoir.
B. The energy a heat engine must deposit in a cold reservoir is greater than or equal to the energy extracted as useful work.
C. A heat engine must deposit some energy in a cold reservoir.
Answer:
C. A heat engine must deposit some energy in a cold reservoir.
Explanation:
The second law of thermodynamics says that "It is impossible to extract an amount of heat Q from a hot reservoir and use it all to do work W. Some amount of heat q must be exhausted to a cold reservoir."
This means that if we extract an amount of heat Q from the hot reservoir, the work W can never be exactly equal to Q, then there is a surplus of heat q that must be deposited in a cold reservoir.
Then we have the equation:
Q = W + q
From this we can conclude that the correct option is:
C. A heat engine must deposit some energy in a cold reservoir.
There will be always some energy that is not transformed into work, and is deposited in a cold reservoir.
C. A heat engine must deposit some energy in a cold reservoir.
The second law of thermodynamics says that "It is impossible to extract an amount of heat Q from a hot reservoir and use it all to do work W. Some amount of heat q must be exhausted to a cold reservoir". This means that if we extract an amount of heat Q from the hot reservoir, the work W can never be exactly equal to Q, then there is a surplus of heat q that must be deposited in a cold reservoir. Then we have the equation: Q = W + q There will be always some energy that is not transformed into work, and is deposited in a cold reservoir.Therefore, option C is correct.
Learn more:
brainly.com/question/17172535
There are two different isotopes; X and Y, both contain the same number of radioactive substances. If sample X
has a longer half-life than Y, compare their rate of radioactive decay.
O A. Rate does not depend on half-life
B. Both of their rates are equal
O C. X has a smaller rate than Y
O D. X has a greater rate than Y
Answer:
Half life refers to the time for 1/2 of the radioactive atoms to decay.
Suppose that X has a half life of 10 days and Y has a half life of 20 days
If both start out with 1000 radioactive atoms then after 20 days
X would have 250 radioactive atoms and Y would have 500 atoms
The rate of decay is greater for the shorter half life:
In the example given X must have the smaller rate of decay because it has a longer half life.
A racecar makes 24 revolutions around a circular track of radius 2 meters in
162 seconds. Find the racecar's frequency
Answer:
[tex]0.15\: \mathrm{Hz}[/tex]
Explanation:
The frequency is of an object is given by [tex]f=\frac{1}{T}[/tex], where [tex]T[/tex] is the orbital period of the object.
Since the racecar makes 24 revolutions around a circular track in 162 seconds, it will take the racecar [tex]\frac{162}{24}=6.75\:\mathrm{s}[/tex] per revolution.
Therefore, the frequency of the racecar is [tex]\frac{1}{6.75}=\fbox{$0.15\:\mathrm{Hz}$}[/tex] (two significant figures).
The radius of the track is irrelevant in this problem.
Which action will leave the dump trucks inertia unchanged?? PLEASE ANSWER FAST!!!
A. add gas
B. increase force applied to engine
Answer:
B.
Explanation:
A small rock is thrown vertically upward with a speed of 17.0m/s from the edge of the roof of a 26.0m tall building. The rock doesn't hit the building on its way back down and lands in the street below. Air resistance can be neglected.
Part A
What is the speed of the rock just before it hits the street?
Express your answer with the appropriate units.
Part B
How much time elapses from when the rock is thrown until it hits the street?
Express your answer with the appropriate units.
Answer:
A) v = 28.3 m/s
B) t = 4.64 s
Explanation:
A)
Assuming no other forces acting on the rock, since the accelerarion due to gravity close to the surface to the Earth can be taken as constant, we can use one of the kinematic equations in order to get first the maximum height (over the roof level) that the ball reaches:[tex]v_{f}^{2} - v_{o}^{2} = 2* g* \Delta h (1)[/tex]
Taking into account that at this point, the speed of the rock is just zero, this means vf=0 in (1), so replacing by the givens and solving for Δh, we get:[tex]\Delta h = \frac{-v_{o} ^{2}}{2*g} = \frac{-(17.0m/s)^{2} }{2*(-9.8m/s2)} = 14.8 m (2)[/tex]
So, we can use now the same equation, taking into account that the initial speed is zero (when it starts falling from the maximum height) and that the total vertical displacement is the distance between the roof level and the ground (26.0 m) plus the maximum height that we have just found in (2) , 14.8m:Δh = 26.0 m + 14. 8 m = 40.8 m (3)Replacing now in (1), we can solve for vf, as follows:[tex]v_{f} =\sqrt{2*g*\Delta h} = \sqrt{2*9.8m/s2*40.8m} = 28.3 m/s (4)[/tex]
B)
In order to find the total elapsed from when the rock is thrown until it hits the street, we can divide this time in two parts:1) Time elapsed from the the rock is thrown, until it reaches to its maximum height, when vf =02) Time elapsed from this point until it hits the street, with vo=0.For the first part, we can simply use the definition of acceleration (g in this case), making vf =0, as follows:[tex]v_{f} = v_{o} + a*\Delta t = v_{o} - g*\Delta t = 0 (5)[/tex]
Replacing by the givens in (5) and solving for Δt, we get:[tex]\Delta t = \frac{v_{o}}{g} = \frac{17.0m/s}{9.8m/s2} = 1.74 s (6)[/tex]
For the second part, since we know the total vertical displacement from (3), and that vo = 0 since it starts to fall, we can use the kinematic equation for displacement, as follows:[tex]\Delta h = \frac{1}{2} * g * t^{2} (7)[/tex]
Replacing by the givens and solving for t in (7), we get:[tex]t_{fall} =\sqrt{\frac{2*\Delta h}{g}} = \sqrt{\frac{2*40.8m}{9.8m/s2} } = 2.9 s (8)[/tex]
So, total time is just the sum of (6) and (8):t = 2.9 s + 1.74 s = 4.64 sTo understand and apply the formula τ=Iα to rigid objects rotating about a fixed axis. To find the acceleration a of a particle of mass m, we use Newton's second law: F net=ma , where F net is the net force acting on the particle.To find the angular acceleration α of a rigid object rotating about a fixed axis, we can use a similar formula: τnet=Iα, where τnet=∑τ is the net torque acting on the object and I is its moment of inertia.
Part A:
Assume that the mass of the swing bar, is negligible. Find the magnitude of the angular acceleration α of the seesaw.
Express your answer in terms of some or all of the quantities m1, m2, l, as well as the acceleration due to gravity g.
Part B:
Now consider a similar situation, except that now the swing bar itself has mass mbar.Find the magnitude of the angular acceleration α of the seesaw.
Express your answer in terms of some or all of the quantities m1, m2, mbar, l, as well as the acceleration due to gravity g.
Answer:
Hello your question is incomplete attached below is the missing part of the question
In this problem, you will practice applying this formula to several situations involving angular acceleration. In all of these situations, two objects of masses m1 and m2 are attached to a seesaw. The seesaw is made of a bar that has length l and is pivoted so that it is free to rotate in the vertical plane without friction. Assume that the pivot is attached tot he center of the bar.
You are to find the angular acceleration of the seesaw when it is set in motion from the horizontal position. In all cases, assume that m1>m2.I
answer : part A = 2*[(M1 - M2)/(M1 + M2)]*g/L
part A = attached below
Explanation:
Part A :
Assuming that mass of swing is negligible
α = T/I
where ; T = torque, I = inertia,
hence T = L/2*9*(M1 - M2)
also; I = [tex]M1*(L/2)^2 + M2*(L/2)^2[/tex]= ( M1 + M2) * (L/2)^2
Finally the magnitude of the angular acceleration α
α = 2*[(M1 - M2)/(M1 + M2)]*g/L
Part B attached below
A pingpong ball has 2 kg/s of momentum when
thrown 8 m/s. Find the mass of the ball.
Answer:
0.25 kg
Explanation:
p = mv
2 = m(8)
2/8 = m(8)/8 *cancels
m = 1/4 OR 0.25 kg
Artificial satellites in space can help you find locations on
Earth. True or false?
Suppose a wheel with a tire mounted on it is rotating at the constant rate of 2.69 times a second. A tack is stuck in the tire at a distance of 0.331 m from the rotation axis. Noting that for every rotation the tack travels one circumference, find the tack's tangential speed.
Answer:
the tack's tangential speed is 5.59 m/s
Explanation:
Given that;
R = 0.331 m
wheel rotates 2.69 times a second which means, the wheel complete 2.69 revolutions in a second, so
ω = 2.69 rev/s × 2π/1s = 16.9 rad/s
using the relation of angular speed with tangential speed
tangential speed v of the tack is expressed as;
v = R × ω
so we substitute
v = 0.331 m × 16.9 rad/s
v = 5.59 m/s
Therefore, the tack's tangential speed is 5.59 m/s
A bat at rest sends out ultrasonic sound waves at 46.2 kHz and receives them returned from an object moving directly away from it at 21.8 m/s, what is the received sound frequency?
f= ? Hz
Answer:
f" = 40779.61 Hz
Explanation:
From the question, we see that the bat is the source of the sound wave and is initially at rest and the object is in motion as the observer, thus;
from the Doppler effect equation, we can calculate the initial observed frequency as:
f' = f(1 - (v_o/v))
We are given;
f = 46.2 kHz = 46200 Hz
v_o = 21.8 m/s
v is speed of sound = 343 m/s
Thus;
f' = 46200(1 - (21/343))
f' = 43371.4285 Hz
In the second stage, we see that the bat is now a stationary observer while the object is now the moving source;
Thus, from doppler effect again but this time with the source going away from the obsever, the new observed frequency is;
f" = f'/(1 + (v_o/v))
f" = 43371.4285/(1 + (21.8/343))
f" = 40779.61 Hz
Our Sun’s mass is 1.0 and our Earth’s mass is 2.0. The distance is standard as given on the simulation. Describe the path of the Earth.
Answer:
Earth orbits the Sun at an average distance of 149.60 million km (92.96 million mi), and one complete orbit takes 365.256 days (1 sidereal year), during which time Earth has traveled 940 million km (584 million mi).
Explanation:
Precisely 1.00 s after the speeder passes, the police officer steps on the accelerator; if the police car's acceleration is 2.70 m/s2 , how much time passes after the police car is passed by a speeder and before the police car overtakes the speeder (assumed moving at constant speed)
Answer:
t= 16.75 s
Explanation:
We will solve this exercise using the kinematic expressions
corridor that goes at constant speed, suppose that its speed is v₁ = 20 m/s, it does not appear in the statement, we start counting the time when it passes the policeman.
x₁ = v₁ t
The policeman starts from rest, so his initial velocity is zero and he has an acceleration a = 2.70 m /s², to use the same time counter we take into account that the policeman left at = 1.00 s after passing the corridor
x₂ = v₀ (t-t₀) + ½ a (t-t₀)²
x₂ = ½ a (t-1)²
at the point where the two meet, the position must be the same
x₁ = x₂
v₁ t = ½ a (t-1)²
(t-1)² = [tex]\frac{2 v_1 t}{a}[/tex]
t² - 2t + 1 - \frac{2 v_1 t}{a} +1 = 0
t² - 2(1 + [tex]\frac{v_1}{a}[/tex]) t +1
let's we solve the second degree equation
t² - 2 ( 1 + [tex]\frac{20}{2.7}[/tex]) t + 1=0
t² - 16.81 t +1=0
t = [ 16.81 ± [tex]\sqrt{ 16.81^2 - 4 )}[/tex] ] /2
t = [16.81 ± 16.695]/2
t₁= 16.75 s
t2= 0.06 s
Time t₂ is less than the reaction time of humans, so the correct answer is the first time
t= 16.75 s