simplify. 5 - 8 ÷ 2 + 4​

Answer:

9,000

5,025

Step-by-step explanation:

Answer:

The answer is: From any point on the graph, he counts down 2 then right 3 to end up on the line again.

Step-by-step explanation:

To count the slope of the graph from any point on the graph; He counts down 2 then right 3 to end up on the line again.

The slope of a linear graph refers to the change behaviour of its dependent variable (usually y-axis) with respect to its Independent variable (usually x-axis).

In essence;

slope, m = (y2-y1)/(x2-x1)

Consequently, From any point on the graph, he counts down 2 then right 3 to end up on the line again.

Read more:

https://brainly.com/question/23935638

Answer: -6x + 18

Step-by-step explanation: multiply each expression in the brackets by -3

so, -3 x 2x = -6x and -3 x -6 will give you +18 or just 18

for a final answer of -6x + 18

Answer:

2 for each

Step-by-step explanation:

i think

Answer:

C). -85 is correct answer

Step-by-step explanation:

This is a multiplication problem, so we can just multiply from left to right:

-8.5 x -5 = 42.5

42.5 x -2 = -85 (negative 85)

(Hope this helps can I pls have brainlist (crown)☺️)

Answer:

[tex]t = \frac{-D+F}{Dr}[/tex]

Step-by-step explanation:

Step 1: Flip the equation.

Step 2: Subtract D from both sides.

Step 3: Divide both sides by Dr.

Answer:

-5, -9

Step-by-step explanation:

This point is located in the fourth quadrant. When rotated at 270 degrees, it'll end up in the third quadrant. The rules for this quadrant is that both the x and y value will be negative.

Answer: I think is -9(5,)

Step-by-step explanation:

Answer:

(4x+5)°+(6x-10)°=145°

4x+6x+5-10=145°

10x-5=145°

10x=145+5

10x=150°

x=15

(6x-10)°=(6×15-10)°

=80°

The value of ∠XMN = 80.

An angle is a figure in plane geometry that is created by two rays or lines that have a shared endpoint.

The value of total ∠LMN = 145.

∠LMN = ∠LMX +∠XMN

145 = (4x + 5) + (6x - 10)

145 = 4x + 5 + 6x - 10

145 = 10x -5

10x = 150

x = 15

Substitute the value of x in ∠XMN =  (6x - 10)

∠XMN =  6×15 - 10

            = 90 - 10

∠XMN = 80

Therefore, the value of the angle  ∠XMN = 80.

To know more about the angle theorems, here

https://brainly.com/question/27962469

#SPJ2

Answer:

-20

Step-by-step explanation:

All that you have to do for this question is just form the equation:

-12-8=x

And solve, which is:

-20

Using the midpoint concept, it is found that:

The midpoint of a line segment is given by the mean of the coordinates of it's endpoints.

For the first segment, which endpoints [tex](2, \sqrt{3})[/tex] and [tex](-6, 5\sqrt{3})[/tex]:

[tex]x_M = \frac{2 - 6}{2} = -2[/tex]

[tex]y_M = \frac{\sqrt{3} + 5\sqrt{3}}{2} = 3\sqrt{2}[/tex]

The midpoint is [tex](-2, 3\sqrt{2})[/tex]

For the second segment, which endpoints [tex]\left(-\frac{5}{3}, \frac{2}{5}\right)[/tex] and [tex]\left(\frac{1}{3}, \frac{3}{2}\right)[/tex]:

[tex]x_M = \frac{-\frac{5}{3} + \frac{1}{3}}{2} = -\frac{4}{6} = -\frac{2}{3}[/tex]

[tex]y_M = \frac{\frac{2}{5} + \frac{3}{2}}{2} = \frac{\frac{4 + 15}{10}}{2} = \frac{19}{20}[/tex]

The midpoint is [tex]\left(-\frac{2}{3}, \frac{19}{20}\right)[/tex]

A similar problem is given at https://brainly.com/question/24352869

Answer:

Step-by-step explanation:

1)

We know that if [tex]x^2=9[/tex], then [tex]x=\pm \sqrt{9}[/tex], so [tex]\boxed{x=3,-3}[/tex]

2)

We know that if [tex]x^3=8[/tex], then [tex]x=\sqrt[3]{8}[/tex], so [tex]\boxed{x=2}[/tex]

3)

[tex]x^3=\frac{1}{8}[/tex] means that [tex]x=\sqrt[3]{\frac{1}{8}}=\frac{\sqrt[3]{1}}{\sqrt[3]{8}}=\frac{1}{2}[/tex].

So, [tex]\boxed{x=\frac{1}{2}}[/tex].

4)

[tex]x^3=27[/tex] means that [tex]x=\sqrt[3]{27}=\sqrt[3]{3^3}=3[/tex].

So, [tex]\boxed{x=3}[/tex].

5)

[tex]x^2=25[/tex] means that [tex]x=\pm \sqrt{25}=\pm \sqrt{5^2}=\pm 5[/tex].

So, [tex]x=5,-5[/tex].

6)

We know that the side length of the square will be [tex]\sqrt{\frac{9}{16}}=\frac{\sqrt{9}}{\sqrt{16}}=\boxed{\frac{3}{4}}[/tex].

7)

[tex]6x^2=54[/tex] means that [tex]x^2=9[/tex], which means that [tex]\boxed{x=3,-3}[/tex].

8)

[tex]2x^2+25=75[/tex] means that [tex]2x^2=50[/tex], which means that [tex]x^2=25[/tex], which means that [tex]\boxed{x=5,-5}[/tex]

Answer:

16 Horses!

Step-by-step explanation:

Since

9 : 2 = 72 : X

Then we know

2/9 = X/72

Multiplying both sides by 72 cancels on the right

72 × (2/9) = (X/72) × 72

72 × (2/9) = X

Then solving for X

X = 72 × (2/9)

X = 16

Therefore

9 : 2 = 72 : 16

Answer:

-2 1/2 ÷ 6 = -0.41

-5 5/8 ÷ 5 = -1.12

-2 1/8 ÷ -1/4 = -8.5

1 5/8 ÷ -1 3/5 = -1.01

-4 1/3 ÷ -2 3/5 = 1.66

,  Hope this helps :)

Have a great day!!

Answer:  y-9=2(x-5)

Step-by-step explanation: The point (5,9) satisfies the equation:

y-9=2(x-5)  for (5,9)?

9-9=2(5-5) ?

0 = 0  YES

Slope of 2?  Rewrite:  

y-9=2(x-5)

y = 2(x-5)+9

The slope is 2  YES

Answer:

$960

Step-by-step explanation:

2,400 divided by 2.5 = 960

y divided by x = 950 (x) 2,400 (y)

Answer:

No, but you can graph them by converting to mx+b form

Step-by-step explanation:

The procedure for solving simultaneous linear equations now called Gaussian elimination appears in the ancient Chinese mathematical text Chapter Eight: Rectangular Arrays of The Nine Chapters on the Mathematical Art. Its use is illustrated in eighteen problems, with two to five equations.[4]

Systems of linear equations arose in Europe with the introduction in 1637 by René Descartes of coordinates in geometry. In fact, in this new geometry, now called Cartesian geometry, lines and planes are represented by linear equations, and computing their intersections amounts to solving systems of linear equations.

The first systematic methods for solving linear systems used determinants, first considered by Leibniz in 1693. In 1750, Gabriel Cramer used them for giving explicit solutions of linear systems, now called Cramer's rule. Later, Gauss further described the method of elimination, which was initially listed as an advancement in geodesy.[5]

In 1844 Hermann Grassmann published his "Theory of Extension" which included foundational new topics of what is today called linear algebra. In 1848, James Joseph Sylvester introduced the term matrix, which is Latin for womb.

Linear algebra grew with ideas noted in the complex plane. For instance, two numbers w and z in {\displaystyle \mathbb {C} }\mathbb {C}  have a difference w – z, and the line segments {\displaystyle {\overline {wz}}}{\displaystyle {\overline {wz}}} and {\displaystyle {\overline {0(w-z)}}}{\displaystyle {\overline {0(w-z)}}} are of the same length and direction. The segments are equipollent. The four-dimensional system {\displaystyle \mathbb {H} }\mathbb {H}  of quaternions was started in 1843. The term vector was introduced as v = x i + y j + z k representing a point in space. The quaternion difference p – q also produces a segment equipollent to {\displaystyle {\overline {pq}}.}{\displaystyle {\overline {pq}}.} Other hypercomplex number systems also used the idea of a linear space with a basis.

Arthur Cayley introduced matrix multiplication and the inverse matrix in 1856, making possible the general linear group. The mechanism of group representation became available for describing complex and hypercomplex numbers. Crucially, Cayley used a single letter to denote a matrix, thus treating a matrix as an aggregate object. He also realized the connection between matrices and determinants, and wrote "There would be many things to say about this theory of matrices which should, it seems to me, precede the theory of determinants".[5]

Benjamin Peirce published his Linear Associative Algebra (1872), and his son Charles Sanders Peirce extended the work later.[6]

The telegraph required an explanatory system, and the 1873 publication of A Treatise on Electricity and Magnetism instituted a field theory of forces and required differential geometry for expression. Linear algebra is flat differential geometry and serves in tangent spaces to manifolds. Electromagnetic symmetries of spacetime are expressed by the Lorentz transformations, and much of the history of linear algebra is the history of Lorentz transformations.

The first modern and more precise definition of a vector space was introduced by Peano in 1888;[5] by 1900, a theory of linear transformations of finite-dimensional vector spaces had emerged. Linear algebra took its modern form in the first half of the twentieth century, when many ideas and methods of previous centuries were generalized as abstract algebra. The development of computers led to increased research in efficient algorithms for Gaussian elimination and matrix decompositions, and linear algebra became an essential tool for modelling and simulations.[5]

Vector spaces

Main article: Vector space

Until the 19th century, linear algebra was introduced through systems of linear equations and matrices. In modern mathematics, the presentation through vector spaces is generally preferred, since it is more synthetic, more general (not limited to the finite-dimensional case), and conceptually simpler, although more abstract.

A vector space over a field F (often the field of the real numbers) is a set V equipped with two binary operations satisfying the following axioms. Elements of V are called vectors, and elements of F are called scalars. The first operation, vector addition, takes any two vectors v and w and outputs a third vector v + w. The second operation, scalar multiplication, takes any scalar a and any vector v and outputs a new vector av. The axioms that addition and scalar multiplication must satisfy are the following. (In the list below, u, v and w are arbitrary elements of V, and a and b are arbitrary scalars in the field F.)[7]

Answer:

.16666667

Step-by-step explanation:

(x)3=0.5

divide both sides by 3

x    =.16666667

Answer:

D

Step-by-step explanation:

The 3 angles in a triangle sum to 180°

Sum the 3 given angles and equate to 180

2x + 3 + 7x - 5 + 3x + 14 = 180 , collect like terms

12x + 12 = 180 ( subtract 12 from both sides )

12x = 168 ( divide both sides by 12 )

x = 14

Then

∠ F = 7x - 5 = 7(14) - 5 = 98 - 5 = 93° → D

estimated sum-114, actual sum-112.97

Step-by-step explanation:

76.6-77

25.5-26

10.87-11

77+26+11=114

76.6+25.5+10.87=112.97

Answer:

[tex] \frac{2 \sqrt{3y} \times |x| }{3y} [/tex]

Step-by-step explanation:

[tex] \sqrt{ \frac{ {4x}^{2} }{3y} } [/tex]

[tex] \frac{2 \times |x| }{ \sqrt{3y} } \\ \frac{2 \times |x|}{ \sqrt{3y} } \times \frac{ \sqrt{3y} }{ \sqrt{3y} } \\ \frac{2 \times |x| \times \sqrt{3y} }{ \sqrt{3y} \sqrt{3y} } [/tex]

[tex] \boxed{Answer:{\boxed{\green{= \frac{2 \sqrt{3y} \times |x| }{3y}}}}} [/tex]

Answer:

120/25 = 4.8

Step-by-step explanation:

To set up the equation you would do this-

[tex]\frac{4.8}{1} =\frac{x}{25} \\[/tex]

Then cross multiply (multiply 4.8 by 25 and x by 1)

[tex]4.8(25) = x(1)\\120 = x[/tex]

Answer:

=  2

=  − 5

Step-by-step explanation:

Answer:

It´s going to be B

Step-by-step explanation:

Answer:

6.5 rounded from 6.53...

to see if this is correct we can:

13.5+9.5+6.5*3 = 42.5

but since we rounded it we can say its 6.5

Answer:

6.55 meters each day

Step-by-step explanation:

You know that in the end the fence must be 42.6 meters long.

On Monday & Tuesday, he installed 22.95 meters of fence. (We know this because 13.45 + 9.5 = 22.95).

So, how much is left? You find that by subtracting 22.95 from 42.6.

42.6-22.95 = 19.65 meters

There are 3 days left of fencing, and these days he will install equal lengths, so you can divide 19.65 meters by 3 days.

19.65 / 3 = 6.55 meters of fence per day

Answer: 2(x + 10)

Step-by-step explanation: you have to add all of the perimeter sides together so you will have to times the length by 2 so your equation would be (8 × 2 = 16). Then the width by 2 ( 2 × (x+2) = 2x + 4) now you add them together

16 + 2x + 4

2x + 20

Now you have to take out the highest common factor which is 2

So it will be 2(x + 10)

Answer:

Continuous

Step-by-step explanation:

Step-by-step explanation: Isolate the variable by dividing each side by factors that don't contain the variable.