1 ) Cobalt(II) nitrate react with nitrate zinc(II) to produce cobalt(III)-zinc oxide, nitrogen dioxide and oxygen
2Co(NO3)2 + Zn(NO3)2 → Co2ZnO4 + 6NO2 + O2
2) Calcium hydroxide react with phosphoric acid to produce calcium, hydrogen phosphate and water
Ca(OH)2 + H3PO4 → CaHPO4 + 2H2O
3) Copper(II) dichromate will react with Iron(III) arsenate to form Copper(II) Arsenate and Iron(III) dichromate
3Cr2CuO7 + 2AsFeO4 → Cu3(AsO4)2 + Fe2(Cr2O7)3
Reaction Type : Double Displacement
4) aluminium hydroxide and hydrochloric acid react to form aluminium chloride and water
Al(OH)3 + 3HCl → AlCl3 + 3H2O
The density of a gas is 1.26 g/L at STP. What is the mass of 1 mole? What could this gas be?
Answer: Molar mass=28.224g/mol, The gas could be Nitrogen gas
Explanation:
Density is calculated as Molar mass/ Molar Volume
Recall that
One mole of an ideal gas at (STP) standard temperature and pressure = 22.4 liters (in Volume)
Given That Density =1.26 g/L
Volume = 22.4L at STP,
Molar mass = Density x Molar Volume
= 1.26 g/L x 22.4L =28.224g
Therefore, if 1 mole of this gas has a mass of 28.224g then its molar mass is equal to 28.224g/mol
The molar mass of Nitrogen = 28.014 g/moL, so we can conclude the the gas could be Nitrogen
How are the three intermolecular forces related?
Explanation:
Intermolecular forces are electrostatic in nature and include van der Waals forces and hydrogen bonds. ... The three major types of intermolecular interactions are dipole–dipole interactions, London dispersion forces (these two are often referred to collectively as van der Waals forces), and hydrogen bonds.May 20, 2018
How long does it take for the moon to make one revolution around Earth?
Answer:
27 days, 7 hours and 43 minutes.
Explanation:
To complete a full orbit around Earth, it takes 27 days, 7 hours and 43 minutes for the Moon. This is called sidereal month and is measured by the Moon's position relative to distant *fixed" stars.
Molecular orbital diagram for Fe.
ANSWER;
1s22s22p63s23p63d64s2
EXPLANATION;
Molecular orbital diagram for Fe.
In writing the electron configuration for Iron the first two electrons will go in the 1s orbital. Since 1s can only hold two electrons the next 2 electrons for Iron go in the 2s orbital. The next six electrons will go in the 2p orbital. The p orbital can hold up to six electrons. We'll put six in the 2p orbital and then put the next two electrons in the 3s. Since the 3s if now full we'll move to the 3p where we'll place the next six electrons. We now shift to the 4s orbital where we place the remaining two electrons. After the 4s is full we put the remaining six electrons in the 3d orbital and end with 3d6.
Therefore the Iron electron configuration will be 1s22s22p63s23p64s23d6.
Note that when writing the electron configuration for an atom like Fe, the 3d is usually written before the 4s. Both of the configurations have the correct numbers of electrons in each orbital, it is just a matter of how the electronic configuration notation is written
Therefore we have 1s22s22p63s23p63d64s2
What element needs just a single extra electron to have the same electron configuration as helium?
Answer:
Hydrogen
Explanation:
Helium has an atomic number Z = 2, that is, it has 2 protons. Since it is electrically neutral it also has 2 electrons. Thus, the electron configuration of helium is 1s².
Hydrogen has an atomic number Z = 1, that is, it has 1 proton. Since it is electrically neutral it also has 1 electron. Thus, the electron configuration of hydrogen is 1s¹.
If hydrogen gains a single extra electron to form H¹⁻, it acquires the same electron configuration than helium.
For calcium-42, How many protons,
neutrons and electrons are present,
respectively.
A. 20, 42, 20
B. 20, 22, 20
C. 20, 22, 18
D. 42, 20, 20
Answer:
B. 20, 22, 20
Explanation:
The atomic number (Z) of calcium is 20, that is, it has 20 protons.
The mass number (A) of calcium-42 is 42. The mass number is equal to the sum of protons and neutrons. Then,
p⁺ + n⁰ = 42
n⁰ = 42 - p⁺
n⁰ = 42 - 20
n⁰ = 22
Since calcium is electrically neutral, it has the same number of protons (+) and electrons (-). Then, calcium has 20 electrons.
Describe the characteristics
of the different sections
(families) of the periodic
table
Answer: The vertical columns on the periodic table are called groups or families because of their similar chemical behavior. All the members of a family of elements have the same number of valence electrons and similar chemical properties. The horizontal rows on the periodic table are called periods
How many grams of water will be produced when 1.6 moles of ethanol (CH3CH2OH) are burned completely? Enter a number only (no units) and express your answer using the correct number of significant figures.
Answer:
86
Explanation:
The reaction that takes place is:
C₂H₅OH + 3O₂ → 2CO₂ + 3H₂OFirst we convert moles of ethanol to moles of water:
1.6 mol ethanol * [tex]\frac{3molH_2O}{1molEthanol}[/tex] = 4.8 mol H₂OThen we convert moles of water to grams of water, using its molar mass:
4.8 mol H₂O * 18 g/mol = 86.4 gSo 84.6 grams of water will be produced.
The mass of water, H₂O produced when 1.6 moles of ethanol, C₂H₅OH are completely burned is 86.4 g
We'll begin by writing the balanced equation for the reaction. This is given below
C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O
From the balanced equation above,
1 mole of C₂H₅OH reacted to produce 3 moles of H₂O.
Next, we shall determine the number of mole of H₂O produced by the reaction of 1.6 moles of C₂H₅OHFrom the balanced equation above,
1 mole of C₂H₅OH reacted to produce 3 moles of H₂O.
Therefore,
1.6 moles of C₂H₅OH will react to produce = 1.6 × 3 = 4.8 moles of H₂O.
Finally, we shall determine the mass of 4.8 moles of H₂O.Mole of H₂O = 4.8 moles
Molar mass of H₂O = (2×1) + 16 = 18 g/mol
Mass of H₂O =?Mass = mole × molar mass
Mass of H₂O = 4.8 × 18
Mass of H₂O = 86.4 gThus, the mass of water obtained from the reaction is 86.4 g
Learn more: https://brainly.com/question/25656650
Read the word equation: “Propane gas plus oxygen gas produces __________.”
b) Convert the word equation to a chemical equation and complete the reaction. Be sure to balance
the chemical equation.
c) Record the balanced chemical equation on the Student Worksheet.
Answer:
Propane gas plus oxygen gas produces water and carbon dioxide.
Explanation:
This is the initial chemical equation: C3H8 + O2 = CO2 + H2O
This is the balanced chemical equation: C3H8 + 5 O2 = 3 CO2 + 4 H2O
C3H8 + O2 → CO2 + H2O
However, the above equation is not balanced. To balance it, we make use of coefficients to make the number of atoms of each element equal. The balanced equation is as follows:C3H8 + 5O2 → 3CO2 + 4H2O
Learn more: https://brainly.com/question/7181548?referrer=searchResults
which 2 not one 2! hjmdnxhjund
Answer:
A and D then I guess
Explanation:
sorry hope this helps!
How do balanced equations demonstrate the law of conservation of mass?
Answer:
Every chemical equation adheres to the law of conservation of mass, which states that matter cannot be created or destroyed. ... When an equal number of atoms of an element is present on both sides of a chemical equation, the equation is balanced.
Explanation:
so have a great day
A different brand of iron tablet was analysed by Hitration with 0.0093 mol.L" potassium
dichromate via the reaction listed below;
Cr2O72- + 6Fe2+ + 14H+ + 2Cr3+ + 6Fe3+ + 7H20
In this experiment 4 tablets were crushed and dissolved in 200 cm3 of dilute acid. 25cm3
of this solution was used in the titration. The results of the titrations were as follows;
Titration Volume dichromate (cm)
1
33.0
2
32.05
3
32.15
4
32.10
Calculate the concentration of iron used in the titration (4 dp).
C1V1/C2V2 = n/n2
The concentration of iron used in the titration : 0.009 M
Further explanationGiven
Reaction
Cr₂O₇²⁻ + 6Fe²⁺ + 14H⁺ ⇒ 2Cr³⁺ + 6Fe³⁺ + 7H₂O
0.0093 mol/L potassium dichromate
200 cm³ of dilute acid, 25cm³ was used in the titration.
Required
the concentration of iron
Solution
Titration formula
C₁V₁n₁=C₂V₂n₂⇒ From equation : n₁=6n₂(1=Cr₂O₇, 2=Fe)
titration average : 33+32.05+32.15+32.1 / 4 = 32.325 cm³(ml)
25 cm³ of iron solution used in titration :
[tex]\tt V_1=32.325~ml\\\\V_2=25~ml\\\\C_1=0.0093~M\\\\\\\\C_1.V_1.n_2=C_2.V_2.n_1\\\\0.0093\times 32.325\times 6=C_2\times 25\times 1\\\\C_2=0.07215~M[/tex]
Dilution(25 ml from 200 ml iron solution)
[tex]\tt C_2.V_2=C_1.V_1\\\\0.007215\times 25=C_1\times 200\\\\C_1=0.009~M[/tex]
What does a useful scientific explanation include ??
Answer: scientific explanation
Explanation:
A really good scientific explanation should do two main things: It should explain all the observations and data we have. It should allow us to make testable predictions that we can check using future experiments.
Which is a factor that keeps Earth in orbit around the Sun? the moon O the gravitational pull of the Sun the continuous motion of the universe Earth's changing speed and direction ctivity
Answer:
The Sun's gravitational pull keeps our planet orbiting the Sun. The motion of the Moon is affected by the gravity of the Sun AND the Earth. The Moon's gravity pulls on the Earth and makes the tides rise and fall every day. As the Moon passes over the ocean, there is a swell in the sea level.
Explanation:
The statement of factor that keeps Earth in orbit around the Sun is "the gravitational pull of the Sun."
What is the Sun and the Earth?The Sun is the primary star of our Solar System. The Earth revolves around our Sun, which really is a star. At a distance of around 93 million miles from the Sun, Earth is the third planet.
The fundamental force that governs the planets' orbits around the sun is gravity. While each planet does have its own gravity, which is determined by its size and speed of movement, orbit is determined by the gravity of the sun.
Our planet orbits the Sun due to it's gravitational pull. The Sun, as well as all of the planets and moons, are gravitationally bound together and circle all around solar system's centre of gravity.
The Sun's gravity is around 27.9 times that of Earth's, and it helps to govern the tides on Earth in a modest degree.
Hence the correct answer is the gravitational pull of the Sun.
Learn more about Sun and Earth here
https://brainly.com/question/2545441
#SPJ2
punnet squares, help how do I do this
Explanation:
Im not sure what the other trait is so I couldn't do phenotype. I hope this still helps though
what tools are used specifically for earth science
Geologic Tools. Geologists use a lot of tools to aid their studies. Some of the most common tools used are compasses, rock hammers, hand lenses, and field books.
hope this helped <3
Your skin is an important organ and has several functions. All of the functions below are performed by the skin EXCEPT
A)
makes vitamin D.
B
prevents-dehydration:
C)
maintains body temperature.
D)
works with bones to help you move.
Answer:D
Explanation:
Your skin makes vitamin D
Your skin prevents dehydration
And your skin maintains body temperature. So you are left with D
Answer:
The correct option is D.
works with bones to help you move
Explanation:
Skin is the outer layer of the body and it is the body's largest organ.
It protect the body from heat and other harmful substances.
It is comprises of three layers;
The Epidermis which is the outer layer.
The dermis which is a fibrous later that protect the Epidermis.
The subcutis is the subcutaneous layer that is beneath the dermis.
Function of the skin.
1. It's regulate body temperature
2. It's protect the body from heat and pathogenic entry.
3. It produces vitamin D
4. The skin allow sensations or feelings of touch, heat, and cold.
Therefore;
works with bones to help you move is wrong because it is the muscle that work with the bone.
How many moles are in 11.0 grams of methane (CH4)?
What is another name for acetic acid? *
1. lemons, limes or oranges
2 .vinegar
3. vitamin C
List and describe 3
properties affected by
molecular polarity.
Answer:
tension, solubility, and melting and boiling points.
Explanation:
HELP 20 POINTS
What is the frequency of an Electromagnetic wave has with wavelength 2.94 x 10^-8 cm?
Which statement is true about copper and salt?
What mass of calcium chloride is required to prepare 3.20 L of 0.850 M of calcium chloride solution?
Answer:
301.92 g of CaCl2.
Explanation:
The following data were obtained from the question:
Volume of CaCl2 solution = 3.20 L
Molarity of CaCl2 solution = 0.850 M
Mass of CaCl2 =?
Next, we shall determine the number of mole of CaCl2 in the solution. This can be obtained as illustrated below:
Volume of CaCl2 solution = 3.20 L
Molarity of CaCl2 solution = 0.850 M
Mole of CaCl2 =?
Molarity = mole /Volume
0.850 = mole of CaCl2 /3.20
Cross multiply
Mole of CaCl2 = 0.850 × 3.20
Mole of CaCl2 = 2.72 moles
Finally, we shall determine the mass of the CaCl2 needed to prepare the solution as follow:
Mole of CaCl2 = 2.72 moles
Molar mass of CaCl2 = 40 + (2×35.5)
=40 + 71
= 111 g/mol
Mass of CaCl2 =?
Mole = mass /Molar mass
2.72 = mass of CaCl2 /111
Cross multiply
Mass of CaCl2 = 2.72 × 111
Mass of CaCl2 = 301.92 g
Therefore, 301.92 g of CaCl2 is needed to prepare the solution.
HELP DUE MONDAY!!
Don’t understand
Answer:
Concept: Chemical Analysis
You need to start by graphing the data and then analyzing it.We can see that the horse has a distance in meters of 980 at the end of the 10 seconds hence it is the fastest.The horse line has a linearly representation, while the alternate line has parabolic tendencies towards the end. The steeper line indicates a faster change in time or velocity which results in a greater distance traveled indicating that the horse is faster.*I have confidence you can graph that*Please help Fast I do not know
Answer:
So the answer to this question would be C. 400 J
Explanation:
Now for this problem, what is given is a 40 Newtons which would represent the force to be applied to the object, and a distance of 10 meters after the application of the said force. When these two combine, work is done. The unit for work is Joules and this is what we are looking for. The formula to get Joules or for work would be the force applied to the object multiplied by the distance that it travelled after the application of the force. It looks like this
work = force x distance
Joules = Newtons x meter
so let us substitute the variables to their corresponding places
Joules = 40 N x 10 m
Joules = 400 J
IF THIS HELPED YOU PLEASE MARK ME BRAINLIEST! THANKS! :)))))
To create an image, the lens of an eye ________
focuses light on the cornea
reflects light away from the retina
bends the cornea to correct vision
focuses light on the retina
Answer:
focuses light on the retina
Explanation:
When the volume of a gas is
changed from 3.6 L to 15.5 L, the
temperature will change from
°C to 87°C.
Assume that the number of moles and the
pressure remain constant.
Be sure to notice that temperatures are
given in °C!
Initial temperature = -189.4 °C
Further explanationGiven
the volume of a gas is changed from 3.6 L to 15.5 L
final temperature = 87 °C = 87+ 273 = 360 K
Required
initial temperature
Solution
Charles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
[tex]\tt T_1=\dfrac{V_1.T_2}{V_2}\\\\T_1=\dfrac{3.6\times 360}{15.5}\\\\T_1=83.6~K=-189.4^oC[/tex]
punnet squares, is this right? Lol
Explanation:
yup,it is correct:-)
Answer:
the genotype would be 50% Rr and 50% rr
the phenotypes would be 50% Red flower (Rr) and 50% white flower (rr)
Explanation:
why is it important to prepare for disaster? what are the things you need to prepare?
Explanation:
The reason why it is important to prepare for an disaster is because Being prepared can reduce fear, anxiety, and losses that accompany disasters. People also can reduce the impact of disasters (flood proofing, elevating a home or moving a home out of one's harm's way, and securing items that could shake loose in an earthquake) and sometimes avoid the danger completely.
The things you need to prepare for an disaster is
WaterFoodClothing Money if neededFlash lightBatteriesFirst aid kitYou can even need an radio( to keep updated).Pieces of DNA that pass genetic traits from parent to offspring
A. Phenotype
B. Gene
D. Allele
Answer:
gene
Explanation: