List three methods of energy transport in nature and explain how the energy is being transferred in each of those methods. Which two are means by which energy is transported inside the Sun?

This question is for my college astronomy class!

9.19 seconds (2dp)

Given:

v = 50m/s

u = 0 m/s

a = 5.44 m/s

t = ?

Substitute values into the equation v = u + at

v = u + at

50 = 0 + 5.44 x t

t = 50/5.44

t = 9.19 seconds

Time is in seconds as the velocity and acceleration are in metres per second instead of kilometres per hour

Answer:

When the speed is changing is the correct answer

Explanation:

Because acceleration is rate of change of velocity

PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE

Answer:

Explanation:

You can use [tex]\Delta E=\frac{\hbar c}{\lambda} \rightarrow \lambda =\frac{\hbar c}{E} = \frac{1240 eV.nm}{0.0141 eV} \approx 87943.26[/tex] in nm.

Here the hc = 1240 eV.nm in eV and nanometer unit.

If an object changes the speed of direction, its velocity also changes. Any change in velocity results in acceleration.

Hope that helps!

The vertical component of the net force that is moving the rocket away from Earth is determined as 171,010.1 N.

The vertical component of the net force that is moving the rocket away from Earth is determined as follows;

Fy = Fsinθ

where;

Fy = 500,000 x sin(20)

Fy = 171,010.1 N

Thus, the vertical component of the net force that is moving the rocket away from Earth is determined as 171,010.1 N.

Learn more about vertical component here: https://brainly.com/question/25854506

Answer:

250,000

Explanation:

The total mechanical energy is kinetic energy + potential energy, so we can look at the object's potential energy to determine the place where it has maximum and minimum kinetic energy.

Potential energy is determined by the equation PE = mgh, where the height is the only changing variable here. Therefore, we look at the height to answer these questions.

Which point on the graph would have the most kinetic energy?

Which point on the graph would have the least kinetic energy?

What point on the graph would have just a little less potential energy than point E?

What point on the graph would have just a little more potential energy than point F?

What point on the graph would have just a little less potential energy than point G?

Answer:

See below

Explanation:

Assuming starting from zero velocity

vfinal = at

24   = a (5.5)

a = 4.36  m/s^2        I think part of your question is missing....what was the initial velocity?

The period (T) of the right pendulum for small displacements in s is equal to 1.49 seconds.

Mathematically, the time taken by this pendulum to undergo a small displacement is given by this formula:

[tex]T=2\pi \sqrt{\frac{L}{g} }[/tex]

Where:

Scientific data:

Acceleration due to gravity (g) = 9.8 m/s².

Assuming a randomized variable for the length of the rope to be 1.2 meter. Also, we know that the right pendulum has a radius of 1/2L.

1/2L = L/2

L/2 = 1.1/2

L/2 = 0.55 meter.

Substituting the parameters into the formula, we have;

[tex]T=2\times 3.142 \sqrt{\frac{0.55}{9.8} }\\\\T=6.284 \times \sqrt{0.0561} \\\\T=6.284 \times 0.2369[/tex]

T = 1.49 seconds.

Read more on a pendulum here: https://brainly.com/question/20070798

Given the measured value of mass M in the experiment the error in 2M is  ; dM

Given data :

Measured value of mass M = ( 0.743 ± 0.005 ) kg

The error in 2M in the measured value M = 0.743 ± 0.005 kg is dM while the error in M² will be 2dM

Hence we can conclude that the measured value of mass M in the experiment the error in 2M is  ; dM.

Learn more about error in 2M : https://brainly.com/question/6650225

Answer:

Least count of vernier caliper=.1/50=.002 CM=.02 MM Least count and precision The least count is directly linked with precision. The smaller is the least count number, the more precise the instrument is.

Explanation:

Is a vernier scale accurate or precise? Every instrument has its accuracy defined as the least count of the instrument.As the least count of vernier callipers is 0.01mm,hence it is not accurate beyond the size measurement of 0.01mm.For which it may be called for vernier scale has presize measurement up to 0.01mm.Ans.. What is a vernier caliper?

Answer:

speed of the friend that is 8m from the center:

0.8π m/s

the distance she will travel in one rotation is:

10

Her speed compared to you is faster because, she is farther away from the axis compared to you.

Explanation:

for the speed, it says the farther you are from the axis the greater your speed is, and for the person who was 4m from the axis of rotation their speed was 0.4 because they are closer to the axis so therefore their speed is slower. so for the friend that is 8m from the axis of rotation its most likely their speed would be 0.8 m/s.

in one revolution you travel 8m your original distance from the axis was 4m so, 8-4 = 4, which means one revolution is plus 4 to your original distance. since the question is asking for rotation and not revolution you can do 4 ÷ 2 which is 2, so for rotation you need to add 2 to your original distance, so 8 + 2 = 10

Explanation:

Water is wet, in the sense of being a liquid which flows easily, because its viscosity is low, which is because its molecules are rather loosely joined together.

Answer:

Liquid water is not itself wet, but can make other solid materials wet.

Wetness is the ability of a liquid to adhere to the surface of a solid, so when we say that something is wet, we mean that the liquid is sticking to the surface of a material.

Whether an object is wet or dry depends on a balance between cohesive and adhesive forces. Cohesive forces are attractive forces within the liquid that cause the molecules in the liquid to prefer to stick together. Cohesive forces are also responsible for surface tension. If the cohesive forces are very strong, then the liquid molecules really like to stay close together and they won't spread out on the surface of an object very much. On the contrary, adhesive forces are the attractive forces between the liquid and the surface of the material. If the adhesive forces are strong, then the liquid will try and spread out onto the surface as much as possible. So how wet a surface is depends on the balance between these two forces. If the adhesive forces (liquid-solid) are bigger than the cohesive forces (liquid-liquid), we say the material becomes wet, and the liquid tends to spread out to maximize contact with the surface. On the other hand, if the adhesive forces (liquid-solid) are smaller than the cohesive forces (liquid-liquid), we say the material is dry, and the liquid tends to bead-up into a spherical drop and tries to minimize the contact with the surface.

Water actually has pretty high cohesive forces due to hydrogen bonding, and so is not as good at wetting surfaces as some liquids such as acetone or alcohols. However, water does wet certain surfaces like glass for example. Adding detergents can make water better at wetting by lowering the cohesive forces . Water resistant materials such as Gore-tex fabric is made of material that is hydrophobic (water repellent) and so the cohesive forces within the water (liquid-liquid) are much stronger than the adhesive force (liquid-solid) and water tends to bead-up on the outside of the material and you stay dry.

Answer:

false

Explanation:

because no machines have 100% efficient

Explanation:

Newton’s second law is a quantitative description of the changes that a force can produce on the motion of a body. It states that the time rate of change of the momentum of a body is equal in both magnitude and direction to the force imposed on it.

Answer:

Explanation:

You can use that [tex]v = v_{o}+gt[/tex] or [tex]v^{2}=v_{o}^{2}+2gh=(25)^{2}+(2)(10)(381)=8245 \rightarrow v \approx 90.8[/tex] m/s.

Answer:

Advantage: it could get rid of some unwanted waste. Disadvantage: it would emit pollution into the air.

Explanation:

no. of seconds in a year = 60 × 60 × 24 × 365

= 31,536,000 seconds

so 2.05 × 10⁵ into years = 0.0065 years (approximately)

Answer:

False

Explanation:

A land breeze is when air flows from land to water. The question above is describing a sea breeze, which is when cool ocean air blows toward land.

Take action on climate change has a positive effect on health of organisms and environment.

Spread awareness and encourage friends, family and co-workers to reduce carbon pollution, reduce burning of fossil fuels by using electrical vehicle and devices. Always buy sustainable products and avoid the use of plastics.

We have to take action on climate change because it improved health,  maintain the population of organism, and reduced inequality. So we can conclude that take action on climate change has a positive effect on health of organisms and environment.

Learn more about climate here: https://brainly.com/question/17922964

For a DJ is setting up their equipment and measures the sound level near a speaker to be 55.65dB, the new sound level is mathematically given as

L=50.470dB

Generally, the equation for the sound level  is mathematically given as

l=10logl/io

Therefore

logl/io=5.57

Hence

I=3.715*10^−8

In conclusion

L'=10log(3*3.715*10^−8)/10^{-12}

L=50.470dB

Read more about Energy

https://brainly.com/question/13439286

Hi there!

Recall that a charge that enters a magnetic field while moving experiences a magnetic force that causes it to enter a state of uniform circular motion.

We know the following (For a point charge):
[tex]F_B = qv B[/tex]

q = Charge (C)
v = velocity (m/s)
B = Magnetic field (T)

Fb= Magnetic force (N)

The equation for centripetal force:
[tex]F_c = \frac{mv^2}{r}[/tex]

m = mass (kg)

v = velocity (m/s)

r = radius (m)

Fc = Centripetal force (N)

Since we are given its period:
[tex]T = \frac{2\pi r}{v}\\\\v = \frac{2\pi r}{T}[/tex]

Plug this expression into the above equations. Since the magnetic force equals the centripetal force, set them equal to each other and simplify.

[tex]q\frac{2\pi r}{T} B = \frac{m}{r}(\frac{2\pi r}{T})^2[/tex]

Cancel out the expression.

[tex]qB = \frac{m}{r} (\frac{2\pi r}{T})[/tex]

Cancel out 'r'.

[tex]qB = \frac{2\pi m}{T}[/tex]

Now, we can simplify as necessary to find a value for 'q' over 'm':
[tex]\frac{q}{m} = \frac{2\pi }{TB} = \frac{2\pi }{(4.79 \times 10^{-6})(0.775)} = \boxed{1692554.464}[/tex]

Thus, the charge is 1.693 ×10⁶ times larger than its mass.

Based on law of conservation of angular momentum, the rotational speed of the star is equal to 6,000 rev/s.

Given the following data:

First of all, we would determine the initial angular speed of the neutron star as follows:

[tex]\omega_i = \frac{1 \;Rev}{10 \;days} \\\\\omega_i = \frac{1 \;Rev}{10 \times 24 \times 60 \times 60}\\\\\omega_i = 1.157 \times 10^{-6}\;rev/s[/tex]

Mathematically, the moment of inertia of a uniform solid sphere is given by this formula:

[tex]I=\frac{2}{5} mr^2[/tex]

Where:

In order to determine the rotational speed of this neutron star, we would apply the law of conservation of angular momentum:

[tex]L_1 = L_2\\\\I_1\omega_1 = I_2\omega_2\\\\\frac{2}{5} m_1r_1^2 \omega_1 = \frac{2}{5} m_2r_2^2\omega_2\\\\m_1r_1^2 \omega_1 = m_2r_2^2\omega_2\\\\\omega_2 =\frac{r_1^2 \omega_1}{r_2^2}[/tex]

Substituting the given parameters into the formula, we have;

[tex]\omega_2 = \frac{ (7 \times 10^5 )^2 \times 1.157 \times 10^{-6}}{ (10 )^2}\\\\\\\omega_2 = \frac{ (7 \times 10^5 )^2 \times 1.157 \times 10^{-6}}{ 10 0}\\\\\omega_2 =\frac{566,930}{100}[/tex]

Final angular speed = 5,669 ≈ 6,000 rev/s.

Read more on inertia here: https://brainly.com/question/3406242

Hi there!

We can use Ampère's Law:

[tex]\oint B \cdot dl = \mu_0 i_{encl}[/tex]

B = Magnetic field strength (B)
dl = differential length element (m)
μ₀ = Permeability of free space (T/Am)

Since this is a closed-loop integral, we must integrate over a closed loop. We can integrate over a rectangular-enclosed area of the rim of the solenoid - ABCD - where AD and BC are perpendicular to the solenoid.

Thus, the magnetic field is equivalent to:
[tex]\oint B \cdot dl = \int\limits^A_B {B} \, dl + \int\limits^B_C {B} \, dl + \int\limits^C_D {B} \, dl + \int\limits^D_A {B} \, dl[/tex]

Since AD and BC are perpendicular, and since:
[tex]\oint B \cdot dl = B \cdot L = BLcos\phi[/tex]

[tex]BLcos(90) = 0[/tex]

If perpendicular to the field, the equation equals 0.

Additionally, since AB is outside of the solenoid, there is no magnetic field present, so B = 0. The only integral we integrate now is:
[tex]\oint B \cdot dl = \int\limits^C_D {B} \, dl[/tex]

Which is horizontal and inside the solenoid. Let the distance between C and D be 'L', and the enclosed current is equivalent to the number of loops multiplied by the current:

[tex]B L = \mu_0 Ni[/tex]

N = # of loops per length multiplied by the length, so:
[tex]BL = \mu_0 nL i \\\\B = \mu_0ni[/tex]

Plug in the given values and solve. Remember to convert # of loops to # of loops per unit length.

[tex]B = \mu_0 (100/0.1)(2) = (4\pi *10^{-7})(1000)(2) = \boxed{0.00251 T}[/tex]

Answer:

0.568

Explanation:

velocity = -9.8 (t) + Vo

Vo= 0 so v= 9.8(t)

Momentum = mass x velocity

v * 0.14 kg = 0.78 kg m/s

v = 5.571 m/sec

v= 9.8(t) , so substituting v we get , 5.571 = 9.8 * t

t = 5.571/9.8 = 0.568 seconds

The net force acting on the wagon when it is pulled at a constant speed is zero (0).

The net force acting on an object is the sum of all the forces acting on the object. The net force on an object is determined by applying Newton's second law of motion as shown below;

F(net) = ma

where;

Constant speed is a situation where the speed of the object does not change with time.

At constant speed, the acceleration of the object is zero (0).

F(net) = m x 0

F(net) = 0

Thus, the net force acting on the wagon when it is pulled at a constant speed is zero (0).

Learn more about constant speed here: https://brainly.com/question/2681210

Answer: It's 2 and 3

Explanation:

Answer:

If the Sun was on the left side of the diagram it would be points A and C

Explanation:

Spring tides are when the Sun, Earth, and Moon are aligned together. Neap tides occur when when the Sun, Earth, and Moon are forming a right angle.

Answer:

C and d mark mwe braliest

Explanation:

meteor impact this ecological processes is most likely responsible for the formation of the crater. Hence option D is correct.

A collision between celestial objects that has quantifiable effects is called an impact event. The most frequent impact events involve asteroids, comets, or meteoroids and have little impact. However, impact events have been shown to occur often in planetary systems and have physical repercussions. However, many surface impacts are reduced by atmospheres through atmospheric entry when massive objects strike terrestrial planets like the Earth. Nonetheless, there may be major physical and biospheric effects. The majority of the solid objects in the Solar System are covered with impact craters and structures, which provide the best empirical evidence for their frequency and size. Since the birth of the Solar System, impact events appear to have had a substantial impact on how the Solar System has changed. Significant impact events have impacted Earth's history and have been linked

To know more about meteor impact ;

https://brainly.com/question/2302988

#SPJ2.

Answer:

Work is best defined as a force exerted on a body to cause it move over a certain distance.

work=force×displacement×cosθ

Explanation: