Answer:
This study is an overview of previous studies on lime (quick and hydrated) -treated soil. Lime is the oldest traditional stabilizer used for soil stabilization. The mechanism of soil-lime treatment involves cation exchange, which leads to the flocculation and agglomeration of soil particles. The high pH environment then causes a pozzolanic reaction between the free Ca+2 cations and the dissolved silica and alumina. Lime-treated soil effectively increases the strength, durability and workability of the soil. Such treatment also improves soil compressibility. A fluctuation behavior was observed on the influence of lime on soil permeability. However, the factors affecting the permeability of the soil-lime mixture should be extensively studied. Nonetheless, lime treatment has a number of inherent disadvantages, such as carbonation, sulfate attack and environment impact. Magnesium oxide/hydroxide are thus proposed as a suitable alternative stabilizer to overcome at least some of the disadvantages of using lime in soil stabilization.
Explanation:
Actually I have a pdf on it to explain more if you want but how to get it to you is the issue. well I'm guessing the one I've put out should be very much okay, I hope so .
what mass TiO2 needs to be dissolved in water to make 0.45 mL of a 0.700 M TiO2 solution
No of moles:-
[tex]\\ \tt\Rrightarrow Molarity (Volume)[/tex]
[tex]\\ \tt\Rrightarrow 0.00045(0.7)[/tex]
[tex]\\ \tt\Rrightarrow 0.000315mol[/tex]
Molar mass of TiO_2=79.866g/molMass:-
0.000315(79.866)=0.025157779gWhat is the second quantum number of a 3p3 electron in phosphorus 1s22s22p63s23p3
The second quantum number of a 3p₃ electron in phosphorus 1s2, 2s2, 2p6, 3s2, 3p3 is 3.
What are quantum numbers?Quantum numbers are a set of numbers that describe the position and energy of an electron in an atom.
Principal, azimuthal, magnetic, and spin quantum numbers are the four types of quantum numbers.
Thus, the second quantum number of a 3p₃ electron in phosphorus 1s2, 2s2, 2p6, 3s2, 3p3 is 3.
Learn more about quantum numbers
https://brainly.com/question/16979660
#SPJ4
This part insulates the reaction chamber from the transfer of heat to or from the surrounding environment. this part contains a known amount of water, which is placed there before the experiment starts. this part is where the metal is placed at the beginning of the experiment. this part is used for measuring the initial and final temperatures of the water.
The amount of heat transferred in and out of the system is measured by calorimetry. The thermometer in the calorimeter is used to measure the temperature.
What are the parts of the calorimetry device?The thermometer (A) is a device used to measure the final and the initial temperature of the water or any other liquid in a system. A metal vessel is a place where the reaction mixture is present.
In-vessel (B), water, and metal are placed before the beginning of the experiment. The styrofoam cup or the outer metal vessel (C) insulates the instrument, from regulating the heat transformation.
Therefore, part A measures the temperature of the reaction mixture.
Learn more about insulated containers here:
https://brainly.com/question/866735
An electric motor works by converting electrical energy to mechanical energy in order to create motion.
For example,Force is generated within the motor through the interaction between a magnetic field and winding alternating (AC) or direct (DC) current.
This works because…
An electric motor works by converting electrical energy to mechanical energy in order to create motion.
For example,Force is generated within the motor through the interaction between a magnetic field and winding alternating (AC) or direct (DC) current.
This works because…
Answer : When an electric current flows through the wire in the electromagnet, a magnetic field is produced in the coil.
[tex]\:\mathsf{Hope\:this\:helps\:you!}[/tex]
Answer:
when an electric current flows through the wire in the electromagnet , a magnetic field is produced in the coil .
Explanation:
Hope it's helpful for you .........How many electrons does calcian have to gain or lose to have 8 valence electrons
Answer:
two electrons
Explanation:
Calcium atoms will lose two electrons in order to achieve the noble gas configuration of argon.
In an experiment using a calorimeter, the following data was obtained:
Mass of calorimeter + water .............150g
Mass of calorimeter ……………………...100g
Final temperature of water …………… 55oC
Initial temperature of water …………. 25oC
What is the total number of Joules absorbed by the water?
Based on the data provided from the experiment using the calorimeter, the heat absorbed by water is 188.1 Joules
What is a calorimeter?A calorimeter is an equipment used in the laboratory to enthalpy change of a reaction.
A calorimeter is insulated to ensure no heat losses or gain from the surroundings.
To determine the Joules of heat absorbed by water, the formula below is used:
Heat absorbed = mass × specific heat capacity × temperature differenceSpecific heat capacity of water = 4.18 J/g.°C
Heat absorbed by water = 15 × 4.18 × (55 - 25)
Heat absorbed by water = 188.1 Joules
Therefore, the heat absorbed by water is 188.1 Joules.
Learn more about calorimeter at: https://brainly.com/question/556855
The addition of a catalyst to a system at equilibrium will increase the rate of:.
Answer:
forward and reverse reaction rates
Explanation:
meaning the equilibrium is reached faster. So if the reaction is already at equilibrium there will be no effect on a concentration-time or moles-time graph.
H2(g) + Cl2(g) ⟶ 2HCl(g)
If 3.7 liters of Cl2 are used for this reaction, how much HCl will be formed? Assume there are enough reactants to complete the reaction and assume the reaction occurs at STP.
The volume of hydrochloric acid, HCl produced from the reaction when 3.7 L of Cl₂ are used is 7.4 L
Balanced equationH₂ + Cl₂ —> 2HCl
Since the reaction occurs at standard temperature and pressure (STP), we can say that:
From the balanced equation above,
1 L of Cl₂ reacted to produce 2 L of HCl
How to determine the volume of HCl producedFrom the balanced equation above,
1 L of Cl₂ reacted to produce 2 L of HCl
Therefore,
3.7 L of Cl₂ will react to produce = 3.7 × 2 = 7.4 L of HCl
Thus, the volume of HCl produced from the reaction is 7.4 L
Learn more about stoichiometry:
https://brainly.com/question/14735801
32. 2 g of ethyl alcohol is dissolved in water to make a 0. 50 L
solution. What is the molarity of the solution?
Answer:
Well, by definition,
molarity = moles of solute
volume of solution
Explanation:
Now the moles of solute are a constant. The volume of solution MAY change substantially with increasing or decreasing temperature. In some calculations molality is used in preference, which is defined by the quotien
Hope this helps!
Why do sea turtles rely on instincts more than mammals do?
Answer:
Mammals do not have instincts, so they must learn all their behaviors from their parents in order to survive.
Sea turtles must survive on their own, while mammals spend time with their parents and learn how to survive as they grow.
Sea turtles are less intelligent than mammals and, thus, cannot learn new behaviors from their parents.
Explanation:
Sea turtles rely on instincts more than mammals do, beacuse to get food for their survival.
What are instincts?Insticts are the natural impulse or motivation which are present from the inborn time to perform some functions in order to react in some specific external stimuli.
Mammals do not react impulsively in any external conditions because they have members or friends from their famliy side, who will teach them how to behave or react. But turtles didn't have that special person, so they do work rely on instincts to get food or many other purposes.
Hence, to survive sea turtles rely on instincts more than mammals do.
To know more about insticts, visit the below link:
https://brainly.com/question/16088051
What is the greatest degree of ionic character found in a sulfur bond
Answer:
Chlorine
Explanation:
can you give me a real life example of a single replacement?
Answer:A single-replacement reaction is a chemical reaction in which one element replaces another in a compound. F₂ + 2NaCl → 2NaF + Cl₂, where F replaces Cl in NaCl. A double-replacement reaction is a reaction in which the metals in two ionic compounds exchange partners.
0.05 moles of HCL are added to 2 L of H2O. What is the molarity of the solution?
Impossible to answer the question with the information provided.
1.60
0.025M
10.4
The molarity of a solution that has 0.05 moles of HCL are added to 2 L of H2O is 0.025M.
How to calculate molarity?The molarity of a solution can be calculated using the following formula:
M = n/V
Where;
M = molarityn = number of molesV = volumeM = 0.05/2
Molarity = 0.025M
Therefore, the molarity of a solution that has 0.05 moles of HCL are added to 2 L of H2O is 0.025M.
Learn more about molarity at: https://brainly.com/question/12127540
Which of the following phrases best defines the word software?
A.
an object that orbits the Earth
B.
a set of radio waves that are used to determine distance
C.
an image that is taken from the air
D.
a program on a compute
Answer:
D. a program on a computer
Explanation:
How many moles of Na are needed to
produce 15 moles of NaCl in the reaction
2Na + Cl2 = 2NaCl?
A conversion involving moles of one
substance to moles of another
substance.
Answer:
15 molesExplanation:
15 moles of NaCl will be obtained from 15 moles of Na.
Using p and q as variables, write formulas for calculating the probability of an offspring from a population having each of the following genotypes
The genotypes are not found in the question, but p and q can be used to calculate genotypic frequencies by using the equation p2 + 2pq + q2 = 1.
What is the Hardy–Weinberg principle?The Hardy–Weinberg principle is a model used in population genetics to estimate allele and genotypic frequencies in a population.
According to the Hardy–Weinberg principle, the sum of p + q is equal to 1, where p and q represent the dominant and recessive alleles, respectively.
The Hardy–Weinberg principle considers the absence of different evolutionary forces acting on the population.
Learn more about Hardy–Weinberg principle here:
https://brainly.com/question/3406634
The formula for calculating the probability of an offspring from a population having each of the following genotypes is p2 + 2pq + q2 = 1.
What is the genotypic frequency?The number of people with a particular genotype divided by the total number of people in a population is known as genotype frequency.
p2 + 2pq + q2 = 1 is the Hardy Weinberg equation.
Thus, the formula for calculating the probability of an offspring from a population having each of the following genotypes is p2 + 2pq + q2 = 1.
Learn more about genotypic frequency
https://brainly.com/question/14214400
#SPJ4
Freon-12 synthesized by the reaction between fluoride at carbon tetrachloride and antimony(III)Suppose 5.0 mol of antimony (III) fluoride is added to 10.0 mol of carbon tetrachloride: How many moles each compound (CCL; SbF;, CClFz, and SbCI3) are there if the reaction is |00% complete
Suppose 5.0 mol of antimony (III) fluoride is added to 10.0 mol of carbon tetrachloride, and from the 100% reaction there are the equivalents of 0 moles of SbF₃, 5.0 moles of SbCl₃, 0 moles of CCl₄, and 15.0 moles of CClF₂.
What is the significance of the balanced reaction?A balanced reaction is one where the reactants and products are present in equal amounts, and if the 100% reaction takes place, then the reactant sides have 1 mol of SbF₃ and 3 mol of CCl₄ that make the product of 1 mol of SbCl₃ and 3 mol of CClF₂. After the 100% reaction, all the reactants get converted into the product. The complete reaction is the below.
SbF₃ + 3CCl₄ → SbCl₃ + 3CClF₂
Hence, suppose 5.0 mol of antimony (III) fluoride is added to 10.0 mol of carbon tetrachloride, and from the 100% reaction there are the equivalents of 0 moles of SbF₃, 5.0 moles of SbCl₃, 0 moles of CCl₄, and 15.0 moles of CClF₂.
Learn more about the balanced reaction here.
https://brainly.com/question/14280002
#SPJ2
What factors might affect the amount of energy needed for
evaporation to occur and account for any differences between the temperatures
you observed?
6 important factors that affect evaporation are : 1. Wind assists evaporation; for example in clothes dry faster under a fan. 2. Heat assists evaporation; for example, in summer clothes dry faster than in winter.
Now have a free meme
give the names of the 5 types of chemical reactions you are responsible for
remembering, and also give the letter model(A + C → D etc.)
Answer:
What are 5 types of chemical reactions?
1. Combination (Synthesis) reaction. A + B → AB.
2. Decomposition reaction. AB → A + B.
3. Displacement reaction. A + BC → AB + C.
4. Double displacement reaction. AB + CD → AD + BC.
5. Combustion reaction. CH4 +2O2 → CO2 + 2H2O.
Explanation:
Calculate the cell potential for the galvanic cell in which the reaction
Al(s)+Au3+(aq)↽−−⇀ Al3+(aq)+Au(s)
Al
(
s
)
+
Au
3
+
(
aq
)
↽
−
−
⇀
Al
3
+
(
aq
)
+
Au
(
s
)
occurs at 25 ∘C
25
∘
C
, given that [Al3+]=0. 00170 M
[
Al
3
+
]
=
0. 00170
M
and [Au3+]=0. 795 M
[
Au
3
+
]
=
0. 795
M
Explanation:
those to arrows between states which makes the chemical unstable right now so you need to change both those signs good luck!
What is the minimum quantity of energy that must be possessed by the reactants for a reaction to occur?
Group of answer choices
Collision model
Thermal energy
Catalyst
Activation energy
Answer:
Activation energy :)
Explanation:
The activation energy starts the reaction! Without it, we would not find out the solution!
Have an amazing day!!!
Please rate and mark brainliest!!
Elements has physical and chemical properties most similar to silicon?
Germanium (Ge) has properties that are similar to silicon.
How do the names of molecular compounds differ from the names of ionic compounds.
Long Answer:
Ionic: Cation is named first followed by the anion.
If it's an ionic compound with a transition metal, there are more than one possible ion. Molecular - named with the least electronegative ion first + prefixes are given to both ions to indicate number of atoms in each element.
Short Answer: Ionic compounds- Cation is named first, followed by the anion.
Need help ASAP. Thank you
Answer:
Circuit 1 = ?
Circuit 2 = Parallel
Explanation:
Since circuit 1 isn't shown on the picture, it's probably a series circuit, but if circuit 1 is a box with symbols around it, then it's a series circuit. But if it has three or more horizontal lines/cables like circuit 2, then it's a parallel circuit - circuit 2 has a second horizontal line with an open switch and lamp.
Circuit 2 is a parallel circuit, as it has branches/horizontal lines (that were explained in the paragraph above).
When calcium carbonate reacts with hydrochloric acid, calcium ions are transferred to the solution. Write only one net ionic equation for this reaction:
Answer:
In conclusion, the net ionic equation for the reaction between calcium carbonate and hydrochloric acid is CaCO3 solid plus two H+ aqueous react to form Ca2+ aqueous plus CO2 gas plus H2O liquid.
When calcium carbonate reacts with hydrochloric acid, calcium ions are transferred to the solution, the the net ionic equation is CaCO₃(s) + 2H⁺ → Ca²⁺ + CO₂ + OH⁻ + H⁺.
What is net ionic equation?
Net ionic equation of any reaction is the equation where all entities are written in the form of ions except spectator ions.
Given chemical reaction is:
CaCO₃(s) + 2HCl(aq) → CaCl₂(aq) + CO₂(g) + H₂O(l)
Ionic reaction for the above reaction will be written as:
CaCO₃(s) + 2H⁺ + 2Cl⁻ → Ca²⁺ + 2Cl⁻ + CO₂ + H⁺ + OH⁻
In the baove reaction Cl⁻ is the spectator ion as they are present on both sides of the given chemical reaction. So the net ionic reaction will be written as:
CaCO₃(s) + 2H⁺ → Ca²⁺ + CO₂ + OH⁻ + H⁺
Hence the net ionic reaction is CaCO₃(s) + 2H⁺ → Ca²⁺ + CO₂ + OH⁻ + H⁺.
To know more about net ionic reaction, visit the below link:
https://brainly.com/question/25604204
#SPJ4
Acidic oxides are common air pollutants and the source of acid precipitation. Basic oxides are not. Use what you know about these oxides to explain this difference.
Answer:
An acidic oxide reacts with water and produces acid. They are also called acid anhydride, which are oxides that react with water to form an acid, or with a base to form a salt. They are oxides of either nonmetal or of metals in high oxidation states. An oxide is a binary compound that we obtain upon the reaction of oxygen with other elements. Their chemistry can be systematically understood by taking an oxoacid and removing water from it until only an oxide remains. The resulting oxide belongs to this group of substances. Usually, it is the oxide of non-metals. For example, sulfurous acid (SO2), sulfuric acid (SO3), and carbonic acid (CO2) are acidic oxides. Thus, CO2 dissolves in water to give carbonic acid, and NO2 gives a mixture of nitrous and nitric acids. An inorganic anhydride (a somewhat archaic term) is an acid anhydride without an organic moiety.
Explanation:
A person observes that when the front porch of a house is wet , it is very slippery. The person adds sand to a paint can and repaints the porch’s surface.
How will the new paint make the porch safer?
Answer:
a
Explanation:
it will help stop frictoin
1.
What is the concentration of a saline solution
with 234.0 grams of NaCl per 250.0 mL of solution?
Answer:
16.015668 M
Explanation:
Concentration is mols/L
nacl molar mass is 58.44277 g/mol
moles = mass/molar mass
moles = 4.00391699
4mol/0.250L = 16.015668 M solution
Given the reaction: 2Na + 2H2O --> 2NaOH + H2 How many moles of Na are needed to produce exactly 5.6 liters of H2, measured at STP?
For a reaction 2Na + 2H2O --> 2NaOH + H2, The moles of Na needed to produce exactly 5.6 liters of H2 is mathematically given as
moles of H2=0.125mole
How many moles of Na are needed to produce exactly 5.6 liters of H2,?
Generally, the equation for the Chemical Reaction is mathematically given as
2Na + 2H2O -> 2NaOH + H2(g)
Therefore, since 2Na gives 1H2
PV=nRT
Hence
n=PV/RT
n=1*5.6/0.0821 *273
n=0.249mols
In conclusion,The moles is
2Na=1H2
moles of H2=0.125mole
Read more about Chemical Reaction
https://brainly.com/question/11231920
A chemist uses 0.25 l of 2.00 m h2so4 to completely neutralize a 2.00 l of solution of naoh. the balanced chemical equation of the reaction is given below. 2naoh h2so4 right arrow. na2so4 2h2o what is the concentration of naoh that is used?
The concentration of NaOH that is used to completely neutralize is 0.25 Liters.
How do we calculate concentration?We will calculate the concentration in terms of molarity by using the below formula:
M₁V₁ = M₂V₂, where
M₁ = molarity of H₂SO₄ = 2m
V₁ = volume of H₂SO₄ = 0.25 L
M₂ = molarity of NaOH = ?
V₂ = volume of NaOH = 2 L
On putting all these values on the above equation, we get
M₂ = (2)(0.25) / (2) = 0.25 L
Hence required volume is 0.25 L.
To know more about molarity, visit the below link:
https://brainly.com/question/26873446