I need help rq u don’t need to show work

The values of A and B would be:

A = 70

B = 120

Now, we have to finding the range of values.

Since, The smallest length is 72 cm and the largest is 119 cm,

so, the range is:

Range = largest value - smallest value

Range = 119 - 72

Range = 47

For the best scale, A good way to do this is to use a scale that starts at the smallest value, ends at the largest value, and has 5 to 10 tick marks evenly spaced in between.

For this data set, we could use a scale that starts at 70 cm and ends at 120 cm, with tick marks every 10 cm.

Therefore, the values of A and B would be:

A = 70

B = 120

Learn more about the subtraction visit:

https://brainly.com/question/17301989

#SPJ1

The water level is rising at a rate of 5 / (4π) inches per second.

To determine the rate at which the water level is rising in the cylindrical container, we can use the formula for the volume of a cylinder:

V = πr^2h,

where V is the volume, r is the radius, and h is the height.

We are given that water flows into the container at a rate of 5 in^3/s. This means that the rate of change of volume with respect to time is dV/dt = 5 in^3/s.

We want to find the rate at which the water level is rising, which is the rate of change of height with respect to time (dh/dt).

We can express the volume V in terms of the height h:

V = πr^2h = π(2^2)h = 4πh.

Taking the derivative of both sides with respect to time, we have:

dV/dt = d(4πh)/dt = 4π(dh/dt).

Now we can solve for dh/dt:

dh/dt = (dV/dt) / (4π).

Substituting the given value for dV/dt:

dh/dt = 5 / (4π).

Therefore, the water level is rising at a rate of 5 / (4π) inches per second.

Learn more about rate at https://brainly.com/question/29034878

#SPJ11

Given that function fis given, and the indicated transformations are applied to its graph (in the given order) is to reflect in the x-axis, shift 4 units to the right, and shift upward 8 units.

We have to write the equation for the final transformed graph R(x).Let's write the given function as f(x).Since the function is reflected in the x-axis, we have to take a negative sign to the original function.

Thus, we replace x by (x - 4).Finally, the function is shifted upward by 8 units.

Therefore, we have to add 8 to the obtained expression.

Thus, the equation of the final transformed graph Rx) is given by:

R(x) = -f(x - 4) + 8

To know more about  original visit:

brainly.com/question/4675656

#SPJ11

The correct answer is D. numbers, intervals.

The important difference to note for the scales of measurement and how they are analyzed is whether they involve numbers or intervals as responses on the scale.

This refers to the level of measurement, which determines the type of statistical analysis that can be applied to the data.

Scales involving numbers as responses, such as the ratio and interval scales, allow for mathematical operations to be performed on the data.

The ratio scale has a meaningful zero point and allows for the calculation of ratios between values, while the interval scale does not have a true zero point but still allows for the calculation of meaningful differences between values.

On the other hand, scales involving categories as responses, such as nominal and ordinal scales, do not involve numbers or intervals.

Nominal scales categorize data into distinct groups without any inherent order, while ordinal scales rank the data in a particular order but do not have a consistent or measurable difference between categories.

Hence the choice D, "numbers, intervals," reflects the distinction between scales that involve numerical responses and those that involve intervals for meaningful analysis and statistical operations.

Learn more about scale click;

https://brainly.com/question/32457165

#SPJ4

Given, the test scores are normally distributed with a mean of 150 and a standard deviation of 15.

We want to target the lowest 10% of scores, which means we need to find the score which corresponds to the 10th percentile of the distribution.

Now, we can standardize the distribution by converting it to the standard normal distribution with mean 0 and standard deviation 1 as follows:

z = (x - μ)/σ

where z is the z-score, x is the raw score, μ is the mean and σ is the standard deviation.

The score that corresponds to the 10th percentile of the distribution can be found using the z-score formula as follows: z = inv Norm (p)

where inv Norm (p) is the inverse normal cumulative distribution function (CDF) which gives the z-score that corresponds to the given percentile p in the standard normal distribution. Since we want to target the lowest 10% of scores,

p = 0.10.

Thus, z = inv Norm(0.10)

= -1.28

Therefore, the z-score that corresponds to the 10th percentile of the distribution is -1.28.

To know more about deviation  visit:-

https://brainly.com/question/30909342

#SPJ11

Your weighted average in the course is 53.19%.

To calculate your weighted average in the course, we need to multiply each grade by its corresponding weight and then sum up the weighted grades.

Tests: 60% × 15% = 9%

Labs: 51% × 10% = 5.1%

Homework assignments: 47% × 27% = 12.69%

Other test: 55% × 48% = 26.4%

Now, sum up the weighted grades:

9% + 5.1% + 12.69% + 26.4% = 53.19%

Therefore, your weighted average in the course is 53.19%.

for such more question on weighted average

https://brainly.com/question/18205277

#SPJ8

The value of the given iterated integral is 2870.9375.

To evaluate the given iterated integral, we will integrate with respect to x first and then with respect to y.

Let's calculate it step by step:

∫[3 to 1] ∫[2y to y] 2x³y² dx dy

First, let's integrate with respect to x:

∫[ 3 to 1](2y) ∫[2y to y] x³y² dx dy

The inner integral with respect to x is:

∫[2y to y] x³y² dx

Integrating this with respect to x:

= [(1/4)x⁴y²] evaluated from 2y to y

= (1/4)(y⁴y² - (2y)⁴y²)

= (1/4)(y⁶ - 16y⁶)

Now, substituting this back into the original integral:

∫[3 to 1] (2y)((1/4)(y⁶ - 16y⁶)) dy

Simplifying:

= (1/2) ∫[3 to 1] y⁷ - 8y⁷ dy

= (1/2) [(1/8)y⁸ - (8/8)y⁸] evaluated from 3 to 1

= (1/2) [(1/8)(1⁸) - (8/8)(1⁸) - (1/8)(3⁸) + (8/8)(3⁸)]

= (1/2) [(1/8) - (8/8) - (1/8) * 6561 + (8/8) * 6561]

= (1/2) [(1/8) - (1) - (1/8) * 6561 + (8/8) * 6561]

= (1/2) [(1/8) - 1 - (1/8) * 6561 + 6561]

= (1/2) [1/8 - 1 - 820.125 + 6561]

= (1/2) [-819.125 + 6561]

= (1/2) [5741.875]

= 2870.9375

Therefore, the value of the given iterated integral is 2870.9375.

To know more about iterated integral, visit:

https://brainly.com/question/27396591

#SPJ11

The points on the curve where the tangent is horizontal are:

(2(0)^3 + 3(0)^2 - 12(0), 2(0)^3 + 3(0)^2 + 1) = (-12, 1)

and

(2(-1)^3 + 3(-1)^2 - 12(-1), 2(-1)^3 + 3(-1)^2 + 1) = (-17, 0)

The points on the curve where the tangent is vertical are:

(2(1)^3 + 3(1)^2 - 12(1), 2(1)^3 + 3(1)^2 + 1) = (-6, 6)

and

(2(-2)^3 + 3(-2)^2 - 12(-2), 2(-2)^3 + 3(-2)^2 + 1) = (-56, -11)

(a) The points on the curve where the tangent is horizontal are:

(-12, 1) and  (-17,0).

To find the points on the curve where the tangent is horizontal, we need to find where the derivative of y with respect to x, dy/dx, is zero. We can find dy/dx using the chain rule:

dy/dx = dy/dt / dx/dt

where

dy/dt = 6t² + 6t

dx/dt = 6t² + 6t - 12

Substituting these into the expression for dy/dx, we get:

dy/dx = (6t² + 6t) / (6t² + 6t - 12)

To find where dy/dx is zero, we set the numerator equal to zero and solve for t:

6t² + 6t = 0

t(6t + 6) = 0

t = 0 or t = -1

So, the points on the curve where the tangent is horizontal are:

(2(0)^3 + 3(0)^2 - 12(0), 2(0)^3 + 3(0)^2 + 1) = (-12, 1)

and

(2(-1)^3 + 3(-1)^2 - 12(-1), 2(-1)^3 + 3(-1)^2 + 1) = (-17, 0)

(b) The points on the curve where the tangent is vertical are:

(-6, 6) and (-56, -11)

To find the points on the curve where the tangent is vertical, we need to find where dx/dt is zero, since this corresponds to vertical tangents. We can solve for t as follows:

dx/dt = 6t² + 6t - 12 = 0

t² + t - 2 = 0

(t + 2)(t - 1) = 0

So the points on the curve where the tangent is vertical are:

(2(1)^3 + 3(1)^2 - 12(1), 2(1)^3 + 3(1)^2 + 1) = (-6, 6)

and

(2(-2)^3 + 3(-2)^2 - 12(-2), 2(-2)^3 + 3(-2)^2 + 1) = (-56, -11)

To know more about tangent refer here:

https://brainly.com/question/31136045#

#SPJ11

The solution of the given equation using quadratic formula is x=6.

In the given equation x²-12x+36=0

a = 1

b = 12

c = 36

Solving the given solution by quadratic formula,

x = -b±√b²-4ac/ 2a

x = -(-12)±√(12)²-4×1×36/ 2×1

x = 12± √144-144/ 2

x = 12±√0/ 2

x = 12±0/ 2

x = 12/ 2

∴ x = 6

Therefore, the solution of the given equation using quadratic formula is x=6.

To learn more about quadratic equation,

https://brainly.com/question/1214333

It is false that mobile banner ads perform significantly better than desktop banners.

There is no clear consensus on whether mobile banner ads or desktop banner ads perform better. The effectiveness of banner ads depends on various factors such as the placement of the ad, its design, and the target audience.

However, it is true that mobile usage has been increasing rapidly in recent years, and more people are accessing the internet through their mobile devices than through desktop computers. Therefore, it is important for advertisers to optimize their ads for mobile devices and ensure that they are mobile-responsive.

Nevertheless, it cannot be generalized that mobile banner ads are more effective than desktop banner ads. The effectiveness of an ad should be evaluated on a case-by-case basis, taking into account the specific objectives, target audience, and design of the ad.

Therefore, it is important for advertisers to test their banner ads on both desktop and mobile devices to determine which platform works best for their specific campaign. And the given statement is false.

To learn more about desktop banners here:

brainly.com/question/1171439#

#SPJ11

. There are no other edges or lines connecting the nodes since the diagonal relation only holds for the self-loops.

To draw the Hasse diagram for the diagonal relation on the set S = {x, y, z}, we need to represent the elements of S as nodes and draw an upward-directed line between two nodes if and only if the diagonal relation holds between them.

In this case, the diagonal relation states that an element is related to itself. Therefore, each element in S will have a self-loop.

The Hasse diagram for the diagonal relation on S = {x, y, z} would look like this:

    x

   / \

  y   z

In this diagram, each element (x, y, and z) is represented as a node, and there is a self-loop on each node since each element is related to itself in the diagonal relation

To know more about lines visit:

brainly.com/question/30286830

#SPJ11

The general indefinite integral of ∫(u + 8)(2u + 5) du is given  by (2/3)u^3 + (21/2)u^2 + 40u + c, where c is the constant of integration.

To find the general indefinite integral of ∫(u + 8)(2u + 5) du, we can expand the expression using the distributive property and then integrate each term separately.

∫(u + 8)(2u + 5) du

= ∫(2u^2 + 5u + 16u + 40) du

= ∫(2u^2 + 21u + 40) du

Now, integrate each term:

∫2u^2 du = (2/3)u^3 + c1, where c1 is the constant of integration.

∫21u du = (21/2)u^2 + c2, where c2 is another constant of integration.

∫40 du = 40u + c3, where c3 is another constant of integration.

Combining the results, we get:

∫(u + 8)(2u + 5) du = (2/3)u^3 + (21/2)u^2 + 40u + c, where c = c1 + c2 + c3 is the constant of integration.

Therefore, the general indefinite integral of ∫(u + 8)(2u + 5) du is given  by (2/3)u^3 + (21/2)u^2 + 40u + c, where c is the constant of integration.

Learn more about integral here:

https://brainly.com/question/31109342

#SPJ11

The complex exponential Fourier series of a signal can be determined by computing the coefficients A₀ and Aₙ.

For (i), the complex exponential Fourier series is given by:

X(ω) = A₀ + ∑[Ancos(nωt + φn) ], where

A₀ = 1/2

Aₙ = (1/2)[cos(2nπ/8) + cos(2nπ/8 + π/2)]

For (ii), the complex exponential Fourier series is given by:

X(ω) = A₀ + ∑[Ancos(nωt + φn) ], where

A₀ = 1

Aₙ = (2/2)[sin(nπ/3) + 3cos(nπ/3 + π/3)]

In conclusion, the complex exponential Fourier series of a signal can be determined by computing the coefficients A₀ and Aₙ. This technique can be used to analyze any periodic signal or system and is invaluable in signal processing, communications, and control engineering.

To know more about Fourier series, click-

https://brainly.com/question/30763814

#SPJ11

To determine the value at node 2, we need more information about the specific context or calculation involving node 2. The probabilities of s (success) and f (failure) alone do not provide enough information to determine the value at node 2.

In a probability tree or network, each node typically represents an event or outcome, and the values associated with the nodes can represent various quantities such as probabilities, expected values, or decision outcomes. Without knowing the specific relationship or calculation involving node 2, we cannot determine its value solely based on the probabilities of s and f.

To provide a more accurate explanation, please provide additional context or information regarding the calculation or relationship involving node 2.

Learn more about probability here: brainly.com/question/32234518

#SPJ11

To convert the given double integral to polar coordinates, we need to express the Cartesian variables, x and y, in terms of polar coordinates, r and θ.

The limits of integration for x and y can be determined as follows:

For x:

The lower limit is determined by the equation y = 0.

The upper limit is determined by the equation y = 25 - x^2, or equivalently, x^2 + y = 25.

Solving for x, we get x = ±√(25 - y).

For y:

The lower limit is determined by the equation y = 0.

The upper limit is determined by the equation y = 2√xy, which simplifies to y = 2rsin(θ)rcos(θ) = 2r^2sin(θ)cos(θ) = r^2sin(2θ).

Thus, the upper limit for y is given by y = r^2*sin(2θ).

Now, let's proceed with the conversion and evaluation of the integral.

The integral can be expressed in polar coordinates as:

∫∫(5/2)√(xy) dA,

where dA represents the differential area element in polar coordinates, which is r dr dθ.

Thus, the integral becomes:

∫[θ=0 to π]∫[r=0 to √(25 - r^2sin(2θ))] (5/2)√(r^2cos(θ)rsin(θ)) r dr dθ.

Now, we can evaluate the integral by integrating with respect to r and then θ.

Let's proceed with the evaluation.

Learn more about integral  here:

https://brainly.com/question/31433890

#SPJ11

On average,  defects  found during an 8-hour shift are 0.9. the correct answer is option C: 0.9.

To calculate the average number of defects during an 8-hour shift, we need to find the weighted average of the number of defects and their respective probabilities.

In this case, the probability distribution is given as follows:

x | P(X = x)

0 | 0.50

1 | 0.25

2 | 0.15

3 | 0.06

4 | 0.03

5 | 0.01

To find the average, we multiply each number of defects (x) by its corresponding probability (P(X = x)) and sum them up.

(0 * 0.50) + (1 * 0.25) + (2 * 0.15) + (3 * 0.06) + (4 * 0.03) + (5 * 0.01)

By performing this calculation, we find that the average number of defects during an 8-hour shift at Wanda's Wooden Widgets is 0.9.  the correct answer is option C: 0.9.

To learn more about  probability , refer here

brainly.com/question/31828911

#SPJ11

a) The formula that models this situation is: T(t) = 68 + 32[tex]e^{(-0.0152t)}[/tex] .

b) To the nearest minute, it take 99 minutes for the soup to cool to 70° F.

c) To the nearest minute, it take 1.1 hours for the turkey to cool to 120° F.

a) Using Newton's Law of Cooling to model this situation we have:

T(t) = Troom + (T₀ - Troom)[tex]e^{(-kt)}[/tex]

Where, T(t) is the temperature of the soup (or turkey) at time t

Troom is the room temperature

T₀ is the initial temperature k is a constant of proportionality

t is time measured in minutes

For the soup, we have:

T(t) = 68 + (100 - 68)[tex]e^{(-kt)}[/tex]

After 20 minutes, the internal temperature of the soup was 91° F.

Therefore, when t = 20,

T(t) = 91.

Hence, we can substitute these values in the above equation and solve for k as follows:

91 = 68 + 32[tex]e^{(-20k)}[/tex]

=> 23 = 32[tex]e^{(-20k)}[/tex]

=> ln(23/32)

= -20k

=> k ≈ 0.0152

Therefore, the formula that models this situation is:

T(t) = 68 + 32[tex]e^{(-0.0152t)}[/tex] (rounded to four decimal places)

b) To find the time it takes for the soup to cool to 70° F,

we need to solve the equation T(t) = 70.

Therefore:

70 = 68 + 32[tex]e^{(-0.0152t)}[/tex]

=> 2 = 32[tex]e^{(-0.0152t)}[/tex]

=> ln(1/16) = -0.0152t

=> t ≈ 98.60

Hence, it will take approximately 99 minutes for the soup to cool to 70° F. (rounded to the nearest minute)

c) 1.1 hours is equal to 66 minutes.

Therefore, to find the temperature of the soup after 1.1 hours, we need to evaluate T(66):

T(66) = 68 + 32[tex]e^{(-0.0152 \times 66)}[/tex] ≈ 83.36

Therefore, after 1.1 hours, the soup's temperature will be about 83 degrees Fahrenheit. (rounded to the nearest degree)

For the turkey:

a) Using Newton's Law of Cooling to model this situation we have:

T(t) = Troom + (T₀ - Troom)[tex]e^{(-kt)}[/tex]

Where, T(t) is the temperature of the turkey (or soup) at time t

Troom is the room temperature

T₀ is the initial temperature

k is a constant of proportionality

t is time measured in minutes

For the turkey, we have:

T(t) = 73 + (190 - 73)[tex]e^{(-kt)}[/tex]

After half an hour, the internal temperature of the turkey was 150° F.

Therefore, when t = 30, T(t) = 150.

Hence, we can substitute these values in the above equation and solve for k as follows:

150 = 73 + 117[tex]e^{(-30k)}[/tex]

=> 77 = 117[tex]e^{(-30k)}[/tex]

=> ln(77/117) = -30k

=> k ≈ 0.0228

Therefore, the formula that models this situation is:

T(t) = 73 + 117[tex]e^{(-0.0228t)}[/tex] (rounded to four decimal places)

b) To find the temperature of the turkey after 55 minutes, we need to evaluate T(55):

T(55) = 73 + 117[tex]e^{(-0.0228 \times 55)}[/tex] ≈ 139.57

Therefore, after 55 minutes, the turkey's temperature will be about 140 degrees Fahrenheit. (rounded to the nearest degree)

c) To find the time it takes for the turkey to cool to 120° F,

we need to solve the equation T(t) = 120.

Therefore:120 = 73 + 117[tex]e^{(-0.0228t)}[/tex]

=> 47 = 117[tex]e^{(-0.0228t)}[/tex]

=> ln(47/117) = -0.0228t

=> t ≈ 92.61

Hence, it will take approximately 93 minutes for the turkey to cool to 120° F. (rounded to the nearest minute)

To know more about decimal places, visit:

https://brainly.com/question/20563248

#SPJ11

The given expression is equal to 1.

Given that [tex]\lim_{x to 0}[/tex]   [(√(1+x) - √(1-x))/x]

To find the limit of the given expression, and simplify it using algebraic manipulations.

[tex]\lim_{x to 0}[/tex]   [(√(1+x) - √(1-x))/x]

Apply the difference of squares formula to simplify the numerator:

= [tex]\lim_{x to 0}[/tex]  [(√(1+x) - √(1-x))(√(1+x) + √(1-x))/x(√(1+x) + √(1-x))]

= [tex]\lim_{x to 0}[/tex]   [(1+x) - (1-x)]/[x*(√(1+x) + √(1-x))]

= [tex]\lim_{x to 0}[/tex]   [2x]/[x*(√(1+x) + √(1-x))]

Simplifying further:

[tex]\lim_{x to 0}[/tex]   [2]/[(√(1+x) + √(1-x))]

Substitute x = 0 into the expression:

[tex]\lim_{x to 0}[/tex]   [2]/[(√(1+x) + √(1-x))] = 2/(√(1+0) + √(1-0))

[tex]\lim_{x to 0}[/tex]   [2]/[(√(1+x) + √(1-x))] = 2/(√1 + √1)

[tex]\lim_{x to 0}[/tex]   [2]/[(√(1+x) + √(1-x))] = 2/(1 + 1)

[tex]\lim_{x to 0}[/tex]   [2]/[(√(1+x) + √(1-x))] = 2/2

[tex]\lim_{x to 0}[/tex]   [2]/[(√(1+x) + √(1-x))] = 1

Therefore, the given expression is equal to 1.

Learn more about limits and their evaluation here:

https://brainly.com/question/12017456

#SPJ4

The probability of observing 5 or fewer tornadoes in Kansas during a 1-year period is 0.265, while the probability of observing between 6 and 9 tornadoes (inclusive) is 0.533.

For the given Poisson distribution with lambda = 9, we need to calculate the probabilities of observing a certain number of tornadoes in Kansas during a 1-year period.
To compute the probability that the number of tornadoes observed is less than or equal to 5, we can use the cumulative distribution function (CDF) of the Poisson distribution. The CDF gives the probability that the number of tornadoes is less than or equal to a certain value. Using a calculator or statistical software, we can find that the probability P(X ≤ 5) is approximately 0.265.
To compute the probability that the number of tornadoes observed is between 6 and 9 (inclusive), we can subtract the probability of observing 5 or fewer tornadoes from the probability of observing 9 or fewer tornadoes. This gives us the probability that the number of tornadoes is between 6 and 9. Using the same calculator or software, we can find that P(6 ≤ X ≤ 9) is approximately 0.533.

In ,summary we can say that the probability of observing 5 or fewer tornadoes in Kansas during a 1-year period is 0.265, while the probability of observing between 6 and 9 tornadoes (inclusive) is 0.533.

To know more about probability, click here

https://brainly.com/question/31828911

#SPJ11

The total amount of ice cream which is left as per given information is equal to option C) 3/4.

Let us calculate the amount of ice cream left in each boat and then add them together to find the total amount of ice cream left.

In one boat, there was 1/4 of the ice cream left.

Since each boat originally had a liter of ice cream, 1/4 of a liter would be left in one boat.

In the other boat, there was 1/2 of the ice cream left.

Again, since each boat originally had a liter of ice cream, 1/2 of a liter would be left in the other boat.

To find the total amount of ice cream left, we add the amounts from both boats.

1/4 liter + 1/2 liter = 3/4 liter

Therefore, the total amount of ice cream left is given by correct option C) 3/4.

Learn more about total amount here

brainly.com/question/21457063

#SPJ4

The most likely equation for line B so that the set of equations has no solution is x + y = 4

To ensure that the set of equations has no solution, line B should be parallel to line A and have a different y-intercept.

Line A is represented by the equation x + y = 2, which can be rewritten as y = -x + 2.

This equation has a slope of -1 and a y-intercept of 2.

To find a line B that is parallel to line A and has a different y-intercept, we need to choose an equation with the same slope (-1) and a different y-intercept.

x + 2y = 2 has a different y-intercept, but the slope is 1/2, not -1.

2x + 2y = 4 has a different y-intercept, but the slope is 1, not -1.

2x + y = 2 has a different y-intercept, and the slope is -2, which is different from the slope of line A.

x + y = 4 has a different y-intercept, and the slope is -1, which matches the slope of line A.

To learn more on Equation:

https://brainly.com/question/10413253

#SPJ1

Answer: q

Step-by-step explanation:

The tire will make approximately 127.55 revolutions while traveling 500 feet.

We need to know the circumference of the tyre in order to calculate how many rotations it will make over a certain distance. The following formula is used to determine the circumference:

Diameter x Circumference

Given that Grace's bicycle tyre has a 15-inch diameter, the following formula can be used to determine its circumference:

Circumference = 15 inches multiplied by

In order to match the units, we must now convert the distance travelled into inches:

500 feet multiplied by 12 inches each foot equals 6000 inches.

By dividing the distance travelled by the circumference, we can determine the total number of revolutions:

Revolutions equal Travelled Distance / Circumference

In place of the values we hold:

Revolutions = 6000 inches/(15 inches * revolutions)

Now that we have the rough number of revolutions:

6000 revolutions / (3.14 * 15)

6000 revolutions / 47.1

127.55 revolutions

Therefore, the tire will make approximately 127.55 revolutions while traveling 500 feet.

For more such questions on revolutions , Visit:

https://brainly.com/question/29102523

#SPJ11

The sample space of this probability experiment is all the multiples of 4 between 20 and 40 inclusive, which are 20, 24, 28, 32, 36, and 40. Therefore, there are 6 outcomes in the sample space.

To identify the sample space of the probability experiment and determine the number of outcomes in the sample space when randomly choosing a number from the multiples of 4 between 20 and 40 inclusive, follow these steps:

1. Identify the range: The range includes numbers between 20 and 40 inclusive.
2. Determine the multiples of 4 in the given range: 20, 24, 28, 32, 36, and 40 are the multiples of 4 within the range.
3. Define the sample space: The sample space (S) is the set of all possible outcomes, so S = {20, 24, 28, 32, 36, 40}.
4. Count the number of outcomes: There are 6 outcomes in the sample space (20, 24, 28, 32, 36, and 40).

So, the sample space of the probability experiment is {20, 24, 28, 32, 36, 40} and the number of outcomes in the sample space is 6.

Know more about probability here:

https://brainly.com/question/13604758

#SPJ11

The formula for the volume of a cone is:

V = (1/3)πr²h

where r is the radius of the base, h is the height of the cone, and π is pi.

In this case, the slant height is given as 17 cm, which we can use with the radius to find the height of the cone using the Pythagorean theorem:

h² = s² - r²

h² = 17² - 8²

h² = 225

h = 15

Now that we have the height, we can plug in the values for r and h into the formula for the volume:

V = (1/3)π(8²)(15)

V = (1/3)π(64)(15)

V = (1/3)(960π)

V = 320π

Therefore, the volume of the cone is 320π cubic cm. Answer: 320π.

The height of Molly's container include the following: B. 26 in.

In Mathematics and Geometry, the volume of a rectangular prism can be calculated by using the following formula:

Volume of a rectangular prism = L × W × H

Where:

By substituting the given dimensions (side lengths) into the formula for the volume of a rectangular prism, we have;

Volume of rectangular prism = base area × Height

312 = 12 × h

Height, h = 312/12

Height, h = 26 in.

Read more on volume of prism here: brainly.com/question/21012007

#SPJ1

Answer:

110

Step-by-step explanation:

If the concentrations of a weak acid and its conjugate base are decreased from 0.5 M and 0.2 M, respectively, to 0.3 M and 0.04 M, the solution's buffer capacity will decrease.

Buffer capacity is directly proportional to the concentrations of both the weak acid and its conjugate base. As the concentrations of both the weak acid and its conjugate base are decreased, the buffer capacity of the solution decreases. This is because there are fewer acid-base pairs available to neutralize the added acid or base, resulting in a larger change in pH.

The buffer capacity of a solution is also related to the ratio of the concentrations of the weak acid and its conjugate base. As the ratio of the concentrations of the weak acid and its conjugate base becomes smaller, the buffer capacity of the solution decreases. In this case, the concentration ratio of the weak acid and its conjugate base decreases from 2.5 to 7.5. This shift towards the weaker conjugate base makes it more difficult for the buffer to neutralize added acid or base, resulting in a decrease in buffer capacity.

In summary, the decrease in concentrations of the weak acid and its conjugate base, as well as the shift in their concentration ratio, both contribute to a decrease in the buffer capacity of the solution.

To learn more about buffer capacity click here, brainly.com/question/491693

#SPJ11

It would cost $1,350 more to be on payment plan B for 6 years than payment plan A.

Payment plan A costs $2,450 down plus $175 per month for 36 months. This is a total of $2,450 + ($175/month * 36 months) = $10,920.

Payment plan B costs $1,900 down plus $165 per month for 24 months. This is a total of $1,900 + ($165/month * 24 months) = $7,640.

The difference between the two payment plans is $10,920 - $7,640 = $3,280.

If you were to pay for 6 years, which is 72 months, on payment plan B, you would pay $7,640 * 2 = $15,280.

The difference between $15,280 and $10,920 is $1,350.

Therefore, it would cost $1,350 more to be on payment plan B for 6 years than payment plan A.

Learn more about payment here : brainly.com/question/31598786

#SPJ11