Answer:
237.8L of water would need to be added.
Explanation:
The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).
Then figure out what information you have and what is being found. In this case:
M1 = 54.7 M
V1 = 1092 mL = 1.092 L
M2 = 0.25 M
V2 = unknown
Then solve the equation for whatever you are trying to find.
M1V1=M2V2
V2=M1V1/M2
Now you need to plug everything in.
V2=(54.7M*1.091L)/0.25M
V2=238.93L
That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.
238.93L - 1.091L = 237.8L
Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.
I hope this helps. Let me know if anything is unclear.
Who asked the question “can you split matter forever?”
Answer:
Of course, what we today call atoms can be divided into more elementary particles, but not that many.
Explanation:
Most of the elements in the periodic table can be described as:
A. metalloids
B. halogens
c. non-metals
D. metals
The answer would be metals :)
In your opinion, would there be a difference in your wieght in Baguio and in Manila ?
Why or Why not
Answer:
My wife and I just visited the City of Baguio for a week. We stayed at the Hotel Supreme Convention, which was very nice. We ate dinner at some really nice places: Mario's (expensive), Don Henrico's (mid), and Good Taste (cheap). We found a nice bar called the Old Bohemian for good live music. We ventured out toward Camp John Hay a couple of times for shopping(the commissary is a tourist trap with retail prices). We also did some street shopping.
Explanation:
My wife and I just visited the City of Baguio for a week. We stayed at the Hotel Supreme Convention, which was very nice. We ate dinner at some really nice places: Mario's (expensive), Don Henrico's (mid), and Good Taste (cheap). We found a nice bar called the Old Bohemian for good live music. We ventured out toward Camp John Hay a couple of times for shopping(the commissary is a tourist trap with retail prices). We also did some street shopping.
Answer:
Why would there be a difference in weight if you live in a different place?Explanation:
[tex]--------------------------------------------[/tex]
If you lived in Manila or Baguio, how would your weight change? It would probably depend on what they are eating, how long they exercise, but not living in a different place, right? This is mind - boggling and i don't know what you mean or if you're asking a different question.
[tex]--------------------------------------------[/tex]
Hope this helps! <3
[tex]--------------------------------------------[/tex]
why is more dew formed on a grass and not on polished metal surface
Answer
Incidentally, they all form dew but because grass is closer to the soil, which maintains heat longer than the air where tree leaves are found, you will find more condensation in that region. Also, higher up the wind and sun will allow faster evaporation which makes the dew less noticable on tree leaves.
Explanation:
Preferred objects of dew formation are thus poor conducting or well isolated from the ground, and non-metallic, while shiny metal coated surfaces are poor infrared radiators. ... If the wet soil beneath is the major source of vapor, however (this type of dew formation is called distillation), wind always seems adverse.
help me pleaseeeeee
Answer:
Arthropod (3)
Annelids (2)
Cnidarians (1)
Echinoderms (4)
Explanations:
I hope all this helps if u don't understand it let me know.
The volume of a gas with an initial pressure of 380 mmHg atm increases from 5.0 L to 8.0 L. What is the final pressure of the gas, in atm, assuming no change in moles or temperature?
A) 238 atm
B) 2.4 atm
C) 0.31 atm
D) 0.80 atm
E) 8.0 atm
Answer:
0.31 atmExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
From the question
760 mmHg = 1 atm
380 mmHg = 0.5 atm
We have
[tex]P_2 = \frac{0.5 \times 5}{8} \\ = 0.3125[/tex]
We have the final answer as
0.31 atmHope this helps you
HELPPPPPPPPP 35 POINTSSSSSS!!!!!FILL IN THE BLANKS with either "reduce" or "oxidize"
Magnesium is able to ——copper, and copper is able to —— magnesium.
Zinc is able to—— magnesium, and magnesium is able to—— zinc.
Copper is able to—— zinc, and zinc is able to—— copper.
Look at my screenshot:
What is an nucleus ?
Nucleus is present at the centre of atom. It contains protons and neutrons. It is very small as compared to the atom.
Answer:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
Explanation:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
Which is the order of these solutions from strong acid to strong base?
Solutions:
household ammonia
battery acid
baking soda
stomach acid
antacid
A-stomach acid household ammonia battery acid antacid baking soda
B-battery acid stomach acid antacid baking soda household ammonia
C-battery acid stomach acid baking soda antacid household ammonia
D-stomach acid battery acid antacid baking soda household ammonia
Answer:
First is battery acid with a pH of 1, second is stomach acid with a pH of 1.5-3.5 (depends), third is antacid with a pH of 7, fourth is baking soda with a pH of 9, and finally, fifth is household ammonia with a pH of 11.
Here is a picture of the pH levels to better help you understand.
Answer:
b
Explanation:
What is the electron configuration of chlorine (CI)?
A. 1s22s22p63s23p3
B. 1s22s22p63s23p5
C. 1s22s22p63s24s23p3
D. 1s22s22p63s23p23d3
The correct answer is B on edg 2020
Answer: it is b
Explanation:
If a person tells you she is 6 feet tall, is she basing that measurement on customary units or metric units?
customary
metric
Answer:
Customary
Explanation:
Answer:
Customary
Explanation:
The average speed of an oxygen molecule is 6.14 x 104 cm/sec at a certain temperature. What is the average speed of a CO2 molecule at the same temperature? (molar mass O2 = 31.9988; CO2 = 44.0098)
Answer:
the average speed of [tex]V_{av} CO_2[/tex] is 5.24 × 104 cm/s
Explanation:
The computation of the average speed of a [tex]CO_2[/tex] is as follows:
[tex]\sqrt{average} = \sqrt{\frac{8 RT}{\pi M} }[/tex]
where,
M = Molar mass
[tex]V_{av} = \frac{\sqrt{1}}{M}[/tex]
Given that
[tex]V_{av} \ of\ oxygen= 6.14 \times 10^4 cm/s[/tex]
The molar mass of oxygen i.e. (MO_2) = 31.9988 g/mol
And, the molar mass of CO_2 is 44.0098 g/mol
Now
[tex]\frac{V_{av} CO_2}{V_{av} O_2} = \frac{\sqrt{M_{O2} }}{M_{CO2}}[/tex]
Now place these values to the above formula
[tex]\frac{V_{av}CO_2}{6.14\times 104 cm/s} = \frac{\sqrt{31.9988} }{44.0098}[/tex]
So,
V_av CO_2 is 5.24 × 104 cm/s
hence, the average speed of [tex]V_{av} CO_2[/tex] is 5.24 × 104 cm/s
Reacting 10.0 mL of H2(g) with 10.0 mL of C2H4(g) produces 10.0 mL of C2H6 at 1.5 atm. If the reaction produces 3.1 kJ of heat and the decrease in volume requires the heat surroundings do 7.6 J of work on the gases, what is the change in internal energy of the gases?
Answer:
the change in internal energy of the gases is -3.0924 KJ
Explanation:
The computation of the change in internal energy of the gases is as follows;
Given that
Q = -3.1 KJ
= -3100 J
It is negative as the heat is lost from the mixture
And,
W = + 7.6 J
It is positive as the work is done in the mixture
Now we use the following equation
Delat E = Q + W
= -3100 J + 7.6 J
= -3092.4 J
= -3.0924 KJ
Hence, the change in internal energy of the gases is -3.0924 KJ
i need the answer for this
Answer:
need points
Explanation:
Adaleigh is learning about renewable and non-renewable resources in her science class. She decides to take
a nature walk and makes notes of all the renewable resources that she sees. Which of the following is an
observation that Adaleigh could have made on her walk?
A. The seeds on the ground are going to grow into new trees.
B. The tallest trees had the most seeds around their bases.
C. When trees decay, they could eventually turn into coal.
D. Pine trees are older than oak trees.
Answer:
A. The seeds on the ground are going to grow into new trees.
Explanation:
Trees are renewable resources.
Which of the following best describes foliated metamorphic rocks?
A
There are easily recognizable fossils.
B
The rock has ribbon-like layers of bands.
C
They have crystals like igneous rocks.
D
Different sized sediments can be seen.
Answer:
It's C because Metamorphic rocks were once igneous rocks. And, because Gneiss which is a Metamorphic rock has crystals inside of it.
Different rock types appear during rock formation. The best description of foliated metamorphic rocks is that;
B . The rock has ribbon-like layers of bands.Due to the pressure and heat that is exerted on some rock types, there is an alignment or foliation of rocks. The appearance can be described as ribbon-like.
The examples of rocks that fall under this classification are slate, phyllite, gneiss, and schist.
The non-foliated rocks do not show any alignment in their minerals. Examples are; quartzite, marble, and novaculite.
Summarily, option B best describes a foliated metamorphic rock.
Learn more here:
https://brainly.com/question/21979222
How many moles are in a sample of 4.57 x 1024 atoms of neon (Ne)?
a.7.59 mol Ne
b.27.5 mol Ne
c.91.4 mol Ne
d.151 mol Ne
Answer:
A 7.59 mol Ne
Explanation:
The number of moles of Ne in a sample of 4.57 x 10²⁴ atoms of neon (Ne) are 7.59 mol of Ne. Hence Option (A) is the correct option. It can be solved with the help of Mole concept.
What is Mole concept ?The mole, symbol mol, is the SI base unit of amount of substance.
The quantity amount of substance is a measure of how many elementary entities of a given substance are in an object or sample.
n = given number / Avogadro's number
= 4.57 x 10²⁴ / 6.022 x 10²³
= 7.59 mol of Ne
Therefore, The number of moles of Ne in a sample of 4.57 x 10²⁴ atoms of neon (Ne) are 7.59 mol of Ne. Hence Option (A) is the correct option. It can be solved with the help of Mole concept.
Learn more about Mole here ;
https://brainly.com/question/26416088
#SPJ2
Which statement about the surface of the moon is true?
o There is water and air, but no life on the moon's surface.
O There is no air, wind, liquid water or life on the moon's surface.
There are liquid seas on the moon's surface.
It is very windy on the moon's surface.
Answer:
There is no air, wind, liquid water or life on the moons surface.
Explanation:
Answer:
ok i know it wont help now bc this was in 2020 but i did this on my lessons and its: There is no air, wind, liquid water, or life on the moon's surface.
Explanation:
i got all the right except the last one
what is an atomic element of carbon
Answer: do u mean atomic number? The atomic number for carbon is 6
Explanation:
Answer:
Chemical element
Explanation:
Carbon is a chemical element with the symbol C and atomic number 6. It is nonmetallic and tetravalent—making four electrons available to form covalent chemical bonds. It belongs to group 14 of the periodic table. Carbon makes up only about 0.025 percent of Earth's crust.
What is the empirical formula for a compound that is comprised of 54.0% sodium, 8.50% boron, and 37.5% oxygen by mass?
A) Na2B2O3.
B) Na3BO3.
C) Na3B2O2.
D) Na4BO4.
Answer:
B) Na3BO3.
Explanation:
Hello!
In this case, since percent compositions are used to identify the empirical formula of an unknown compound, we can assume we have 54.0 g of sodium, 8.50 g of boron and 37.5 g of oxygen, and we compute the moles of each one:
[tex]n_{Na}=54.0g*\frac{1mol}{23g} =2.35mol\\\\n_B=8.50g*\frac{1mol}{11g}=0.773mol\\\\n_O=37.5g*\frac{1mol}{16g}=2.34mol[/tex]
Now, we divide by the moles of boron as those are the fewest:
[tex]Na:\frac{2.35}{0.773}=3\\\\B:\frac{0.773}{0.773}=1\\\\O=\frac{2.34}{0.773}=3[/tex]
Thus, the empirical formula is B) Na3BO3.
Best regards!
4. How many moles of water are produced when 3.25 moles of CO2 are formed?
Answer:
6.50 mol
Explanation:
The question is incomplete but I looked it up on the web.
How many moles of water are produced when 3.25 moles of CO₂ are formed during the combustion of methyl alcohol (CH₃OH)?
Step 1: Write the balanced equation
2 CH₃OH + 3 O₂ → 2 CO₂ + 4 H₂O
Step 2: Establish the appropriate molar ratio
According to the balanced equation, the molar ratio of CO₂ to H₂O is 2:4.
Step 3: Calculate the moles of water formed with 3.25 moles of carbon dioxide
We will use the established molar ratio.
3.25 mol CO₂ × (4 mol H₂O/ 2 mol CO₂) = 6.50 mol H₂O
When is my dad going to get the milk?
Answer:
joe.......
Explanation:
mama......
Jada Peterson
Wanda often looks through her telescope at the details of different bodies in our solar system. What skill is Wanda using?
A:observing
O concluding
O experimenting
hypothesizing
Save and exit
1
Answer: A
Explanation:
how many elements are found in the third period. A.2 B.18 C.8 D.32
Answer:
8
Explanation:
u can find it on ur chemistry book
Answer:
C. 8
Explanation:
Check chemistry textbook
What is the difference between a purine and a pyrimidine?
Answer: Adenine and guanine are the two purines and cytosine, thymine and uracil are the three pyrimidines. The main difference between purines and pyrimidines is that purines contain a sixmembered nitrogencontaining ring fused to an imidazole ring whereas pyrimidines contain only a sixmembered nitrogencontaining ring. They both are types or categories of nitrogen containing bases present in nuclei acids of DNA and RNA.
Purines are 2 Ring or Carbon Ring, Nitrogen containing bases. That consist of these 2 rings next placed next to each other. These examples include - Adenine and Guanine.
Pyrimidines are 1 or single Ring Nitrogen containing structures. There are 3 nitrogenous bases that are categorized as pyrimidines. Cytosine, Thymine, and Uracil.
Which energy source releases the most carbon dioxide?
O solar
O wind
O nuclear
O coal
Answer:
Coal
Explanation:
Coal is by far the worst emitter, followed by natural gas, with solar, wind and nuclear all low-carbon.
Coal, a non-renewable energy source releases the most carbon dioxide into the atmosphere.
What are energy sources?Energy sources refers to the various sources in which energy for man's needs are obtained.
There are two types of energy sources:
Renewable energy sourcesNon-renewable energy sourcesThe non-renewable energy sources such as coal release large amounts of carbon dioxide until The atmosphere.
Therefore, Coal, a non-renewable energy source releases the most carbon dioxide into the atmosphere.
Learn more about non-renewable energy sources at: https://brainly.com/question/15415043
#SPJ2
What two layers of the earth are made of rock
Answer: There are two types of crust; oceanic and continental. Oceanic crust is denser and thinner and mainly composed of basalt.
Explanation:
The crust This is the outside layer of the earth and is made of solid rock, mostly basalt and granite. Oceanic crust is denser and thinner and mainly composed of basalt.
Answer:
The crust and the upper layer of the mantle together make up a zone of rigid, brittle rock called the Lithosphere .
Explanation:
In which unit is the wavelength of an electromagnetic wave commonly measured?
A. J
B. nm
C. s-1
D. kg
Answer:
nm
Explanation:
trust me:)
What is the molecular structure of H2O?
Answer:
A water molecule consists of two hydrogen atoms and one oxygen atom. The three atoms make an angle; the H-O-H angle is approximately 104.5 degrees. The center of each hydrogen atom is approximately 0.0957 nm from the center of the oxygen atom.
Explanation:
The formula for calculating power is work divided by time (power = work + time). What are two ways of stating the same relationship?
work = power + time
nwork s power x time
power
time = work x power
Opower workx time
time
Work
Answer:
See the answer below
Explanation:
The formula for calculating power is such that;
power = work/time
Two ways to restate the relationship between the 3 variables would be to make time and work the subject of the formula respectively.
1. When time if made the subject of the formula;
time = work/time
2. When work is made the subject of the formula;
work = power x time