How much force would you need to cause a 20-kilogram object to accelerate in a straight line to 20 m/s2?

The magnetic field for a moving charge is the same as the magnetic field from a current element of length, dL, carrying current, I, provided that the quantity qv is replaced by 'IL'.

The magnetic force on a charged particle is determined from the product of the magnetic field strength (B), speed of the charge (v) and magnitude of the charge (q).

The magnitude of the force is caculated using the following formula;

F = qvB

The magnitude of the force is calculated using the following formula,

F = BILsinθ

F = BIL

Where;

At equal magnetic force, the magnetic field can be calculated as follows;

B = F/qv = F/IL

Thus, the magnetic field for a moving charge is the same as the magnetic field from a current element of length, dL, carrying current, I, provided that the quantity qv is replaced by 'IL'.

Learn more about magnetic force here: https://brainly.com/question/13277365

The moving charge is the same as the field from a current element of length dl carrying current I provided that the quantity qv is replaced by "IL".

It is the type of field where the magnetic force is obtained. With the help of a magnetic field. The magnetic force is obtained it is the field felt around a moving electric charge.

The magnetic force on the charged particle is found as;

[tex]\rm F = qvB[/tex]

The magnetic force on the current-carrying wire is found as;

[tex]\rm F = BIL sin \theta[/tex]

When the angle of inclination is at a right angle;

[tex]\rm F= BIL[/tex]

The magnetic field is;

[tex]\rm B = \frac{F}{qv} \\\\ B= \frac{F }{IL}[/tex]

The moving charge is the same as the field from a current element of length dl carrying current I provided that the quantity qv is replaced by "IL".

Hence the quantity qv is replaced by "IL".

To learn more about the magnetic field refer to the link;

https://brainly.com/question/19542022

#SPJ4

Answer:

b

Explanation:

b

Answer:

That's Rontgen

Explanation:

Wilhem Rontgen

A decrease in production of goods could cause the economy to move from point a to point b.

Shifts in the production are due to  many factors that change the output of an economy such as advances in technology, changes in resources, more education or training and changes in the labor force.

So we can conclude that a decrease in production of goods could cause the economy to move from good to poor.

Learn more about economy here: https://brainly.com/question/17996535

Answer:

3 m/s

Explanation:

Initial = Final

Mass * Velocity = Mass *Velocity

8000kg * 12m/s = (8000kg+ 24000kg) * (Final Velocity)

(96000 kgm/s) / (32000kg) = (Final Velocity)

Final Velocity = 3 m/s

The speed of the coal car afterward is 3 m/s if an empty coal car of a train of mass 8000 kg is moving at 12 m/s along rails. 24000 kg of coal is dumped into the car from a motionless bin.

The momentum of the body before the contact is always equal to the momentum of the body after the collision, according to the law of conservation of momentum.

According to the law of conservation of momentum;

Momentum before collision =Momentum after collision

We have:

Mass of the empty coal car of train M(e) = 8000 kg

Speed V(e) = 12 m/s

Mass of the coal M(c)  = 24000 kg

Let's suppose the speed of the coal car afterward V(c)

M(e) ×V(e) = (M(c)+M(e))× V(c)

8000×12 = (24000+8000)×V(c)

V(c) = 3 m/s

Thus, the speed of the coal car afterward is 3 m/s if an empty coal car of a train of mass 8000 kg is moving at 12 m/s along rails. 24000 kg of coal is dumped into the car from a motionless bin.

Learn more about the law of conservation of momentum here:

https://brainly.com/question/1113396

#SPJ4

Answer:

Newton's first law: the law of inertia

Newton's first law states that if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force.

Explanation:

Anything aka if a body is at constant speed in a straight line it would probably remain or keep moving in a straight line unless something slows it down like Fricton.

Answer:

what are you calculating put the full question so I can help you out: )

Explanation:

its quite confusing just a little lol

Question :-

Answer :-

Explanation :-

As per the provided information in the given question, we have been given that the Frequency of the Radio is 220 Hertz . Wavelenght is given as 4.2 meter . And, we have been asked to calculate the Speed of the Wave .

For calculating the Speed , we will use the Formula :-

[tex] \bigstar \: \: \: \boxed{ \sf{ \: Speed \: = \: Wavelength \: \times \: Frequency \: }} [/tex]

Therefore , by Substituting the given values in the above Formula :-

[tex] \dag \: \: \: \sf{Speed \: = \: Wavelength \: \times \: Frequency} [/tex]

[tex] \longmapsto \: \: \: \sf{Speed \: = \: 4.2 \: \times \: 220} [/tex]

[tex] \longmapsto \: \: \: \textbf {\textsf {Speed \: = \: 924 }} [/tex]

Hence :-

[tex] \underline {\rule {180pt} {4pt}} [/tex]

Answer:

A Radio has a Frequency of 220 Hertz . The Sound produced by the Wavelength is 4.2 meter . Identify the Speed of the Wave .

11 m/s

0.01 m/s

52.3 m/s

924 m/s

Answer :-

Speed of the Wave is 924 m/s .

Explanation :-

As per the provided information in the given question, we have been given that the Frequency of the Radio is 220 Hertz . Wavelenght is given as 4.2 meter . And, we have been asked to calculate the Speed of the Wave .

For calculating the Speed , we will use the Formula :-

\bigstar \: \: \: \boxed{ \sf{ \: Speed \: = \: Wavelength \: \times \: Frequency \: }}★

Speed=Wavelength×Frequency

Therefore , by Substituting the given values in the above Formula :-

\dag \: \: \: \sf{Speed \: = \: Wavelength \: \times \: Frequency}†Speed=Wavelength×Frequency

\longmapsto \: \: \: \sf{Speed \: = \: 4.2 \: \times \: 220}⟼Speed=4.2×220

\longmapsto \: \: \: \textbf {\textsf {Speed \: = \: 924 }}⟼Speed = 924

Hence :-

Fourth Option is Correct Answer .

Answer:

Mechanical waves are waves that need a medium for propagation. Non-mechanical waves are waves that do not need a medium for propagation.

Explanation:

I hope its helped thank you !! ( don't report my asnwer just delete it ) brainlest pls if u can

The time taken for the car's tires to complete one full rotation when it car drives down the road at 6m/s. The tires on the car have a diameter of .7m. is 0.37 s.

Time is the measure of the duration of past , present or future event.

To calculate the time taken for the tires to complete one full rotation, we use the formula below.

Formula:

Where:

Make t the subject of the equation

From the question,

Given:

Substitute these values into equation 2

Hence, The time taken for the car's tires to complete one full rotation is 0.37 s.

Learn more about time here: https://brainly.com/question/4931057

The kinetic energy of the bullet-block system is equal to the potential energy of the bullet-block system when it reaches its maximum height.

According to the principle of conservation of linear momentum, momentum before collsion is equal to momentum after collision. Let us now answer the questions individually.

1) The momentum of the bullet before collsion = (0.001 Kg * 35 m/s) = 0.35 Kgms-1

2) The kinetic energy of the bullet before collision = 0.5 * 0.001 * (35 m/s)^2 = 0.6125 J

3) Velocity after collsion is obtained from;

(0.001 Kg * 35 m/s) + (2 kg * 0 m/s) = (0.001 Kg + 2 kg) v

v = 0.35/2.001 =

v=0.1749 m/s

4) Total kinetic energy after collison = 0.5 * (0.001 Kg + 2 kg) * (0.1749 m/s)^2

= 0.031 J

5) The maximum possible potential energy of the bullet-block system when it reaches its maximum height = Total kinetic energy after collison = 0.031 J

6) The  maximum possible height of the bullet-block system is obtained from;

PE = mgh

h = 0.031 J/(0.001 Kg + 2 kg) * 9.8 ms-2

h = 0.0015 m or 0.15 cm

Learn more about kinetic energy: https://brainly.com/question/999862

Answer:

Charged

Explanation:

Look at a example below

Explanation:

If the size and direction of the forces on the object are exactly balanced , then there is no net force acting on the object

Answer:

v = 14.92 m/s

Explanation:

First, make a free body diagram and see the forces in the y-direction.

Use Newton's 2nd Law F = ma to replace ∑F_y with m * a_y.

The acceleration in the y-direction is the centripetal acceleration, a_c = v^2/r.

The normal force is 0 because this is where the rollercoaster is not falling off the track yet not touching the track.

The masses cancel out.

Solve for v to find the speed of the rollercoaster at the top of the loop.

The minimum speed the coaster must have at the top of the loop to not fall off the track is 14.92 m/s.

(a) The wavelength of the wave for the fundamental mode is 2.4 m.

(b) The fundamental frequency of the wave is 2,708.33 Hz.

The wavelength of the wave for the fundamental mode is calculated as follows;

Node to Node, N → N = λ/2

L = λ/2

λ = 2L

λ = 2 x 1.2

λ = 2.4 m

The fundamental frequency of the wave is calculated as follows;

f = v/λ

f₀ = v/2L

f₀ = (6500)/(2 x 1.2)

f₀ = 2,708.33 Hz

The diagram of the wave for the fundamental mode is in the image uploaded.

Learn more about wavelength here: https://brainly.com/question/10728818

If the earth rotated on an axis that was not tilted with respect to earth's orbit Under this condition time periods of daylight and darkness be equal everywhere on earth all year.

The Earth orbits the Sun in a counterclockwise pattern above the northern hemisphere at an average distance of 149.60 million km.

The Earth revolves around its axis once every 24 hours and orbits the sun once every 365 days. The Earth's rotation on its axis, not its orbit around the sun, causes day and night.

The term 'one day' refers to the time it takes the Earth to rotate once on its axis, which includes both day and night.

Hence the earth rotated on an axis that was not tilted with respect to the earth's orbit Under this condition time periods of daylight and darkness be equal everywhere on earth all year.

To learn more about the earth's orbit refer to the link;

https://brainly.com/question/15022652

In the formula F = −kx , what does the minus sign indicate?

Solution: It indicates that the restoring force is in the direction opposite the displacement.

====================================================

Answer:

It indicates that the restoring force is in the direction opposite the displacement.

Explanation:

I had an explanation but, my acc got deleted and yeah, uhm the explanation is dead now, I know this is correct though!

~Kandy~

hope this helped!

brainliest please!

Answer:

Johannes Kepler

Answer:

Yes

Explanation:

Displacement is the distance from the starting point to the end point. If you live and die at the same place, you will have 0m as your displacement.

Hi there!

We can use the equation for the charge of a charging capacitor:
[tex]q(t) = C\epsilon( 1 - e^{-\frac{t}{RC}})[/tex]

Using Capacitor equations:
[tex]C = \frac{Q}{V}}\\\\Q = CV[/tex]

Therefore, Cε equals the steady-state charge of the capacitor (the function approaches this value as t ⇒ ∞.

We can plug in the givens and solve.
[tex]\epsilon = 5 V\\\\C = 100\mu F = 0.0001 F[/tex]

[tex]Q = C \epsilon = (0.0001)(5) = \boxed{0.0005 C}[/tex]

The charge on the capacitor when the circuit has reached a steady-state is 0.0005C.

The capacitance of a conductor is defined as the ratio of the quantity of electric charge stored on it to the difference in electric potential.

Given that the resistance of the resistor is 20 kω, while the capacitance of the capacitor is 100 μf, and the voltage of the battery is 5V.

Now, the charge on the capacitor when the circuit has reached a steady-state can be written as,

[tex]Q=CV\\\\Q = 100\mu F \times 5V\\\\Q = \dfrac{100}{1,000,000}F \times 5V\\\\Q = 0.0005C[/tex]

Hence, the charge on the capacitor when the circuit has reached a steady state is 0.0005C.

Learn more about Capacitance:

https://brainly.com/question/12644355

#SPJ4

Centripetal acceleration

#1

#2

Direction of force also towards centre

Answer:

D

Explanation:

The speed is increasing and he was stationary which means the acceleration is not 0

Based on the first law of thermodynamics, the energy gained by a system is equal to the energy lost by the surroundings.

The laws of thermodynamics can be summarised as follow

From the laws given above precisely the first law, we can conclude that the energy gained by a system is equal to the energy lost by the surroundings

Learn more about laws of thermodynamics:

https://brainly.com/question/3808473

The wavelength of the light ray with the given frequency is 4.05 × 10⁴nm.

Given the data in the question;

Wavelength can be simply defined as the spatial period of a periodic wave. When the shapes of waves are repeated, the distance over which they are repeated is called wavelength. Wavelength is expressed as;

[tex]\lambda = \frac{c}{f}[/tex]

Where [tex]\lambda[/tex] is wavelength, f is frequency and c is speed of light( [tex]c = 3*10^8m/s[/tex] )

We substitute our values into the expression above to determine the wavelength of the light ray.

[tex]\lambda = \frac{c}{f} \\\\\lambda = \frac{3*10^8m/s}{7.4*10^{12}s^{-1}}} \\\\\lambda = \frac{3*10^8ms/s}{7.4*10^{12}}}\\\\\lambda = 4.05*10^{-5}m\\\\\lambda = 4.05*10^{4}nm[/tex]

Therefore, the wavelength of the light ray with the given frequency is 4.05 × 10⁴nm.

Learn more about wavelength: https://brainly.com/question/16776907

Answer:

B released when a nucleaus splits

Answer:

distance of compression: 0.07071 m

Explanation:

[tex]\sf energy = \dfrac{1}{2} kx^2[/tex]

[tex]\rightarrow \sf 0.5= \dfrac{1}{2} (200)x^2[/tex]

[tex]\rightarrow \sf 0.5= (100)x^2[/tex]

[tex]\rightarrow \sf 5\ *\ 10^{-3}= x^2[/tex]

[tex]\rightarrow \sf x = \sqrt{5\ *\ 10^{-3}}[/tex]

[tex]\rightarrow \sf x =0.07071 \ m[/tex]

Answer:

Alloys are just mixtures of metal and metalloids are metallic substances with properties of metal.

Answer:

metalloids are chemical elements that form substances that have properties of metals and non metals while alloys is a mixture of metals

The water present in the middle doesn't experience pressure as much as that experienced by water at the bottom. Pressure is more at bottom surface hence fluids flow from higher pressure to lower pressure. This is why the water rushes out from the bottom hole much faster than from the upper hole