How many grams of water will be produced when 1.6 moles of ethanol (CH3CH2OH) are burned completely? Enter a number only (no units) and express your answer using the correct number of significant figures.

Answer:

Explanation:

proposed an early model of the atom as a central nucleus containing protons and neutrons being orbited by electrons in shells. As previously discussed, there is a connection between the number of protons in an element, the atomic number that distinguishes one element from another, and the number of electrons it has. In all electrically-neutral atoms, the number of electrons is the same as the number of protons. Each element, when electrically neutral, has a number of electrons equal to its atomic number.

Answer:

You can check diagram with number of proton neutron and electrons

Explanation:

The molality of a solution : 0.128 m

Given

15.9 g of Ca3(PO4)2 in 400 grams of water.

Required

The molality

Solution

molality = mol solute / kg solvent

solute= Ca3(PO4)2(MW=Molecular Weight: 310.2 g/mol)

mol solute :

[tex]\tt \dfrac{15.9}{310.2}=0.0512[/tex]

The molality :

[tex]\tt \dfrac{0.0512}{0.4~kg}=0.128~m[/tex]

Answer:

hexane C6H14

IS YOUR ANSWER

Explanation:

I HOPE IT HELPS MATE

MARK ME BRAINLIEST PLS

I WILL ALWAYS HELP YOU UNDERSTANDING YOUR ASSINGMENTS

HAVE A GREAT DAY

#CAPTAINPOWER :)

Answer:

help you with what?

Explanation:

Answer:

NaF, CaBr2, MgO

Explanation:

Hi! For this problem, you are going to want to look at the charges of the elements in order to write their formulas.

NaF: Na has a charge of +1 and F has a charge of -1. This means that they have a 1:1 ratio and the formula is written as such - NaF.

CaBr2: Ca has a charge of +2 and Br has a charge of -1. For this problem you want to make sure that their formal charge (the charge of the entire molecule) equals 0. This means that the negative charges need to equal the positive charges. Looking at this, you are going to need to Br ions with a charge of -1 to equal one Ca ion with a charge of +2 - CaBr2.

MgO: Mg has a charge of +2 and O has a charge of -2. This means that they have a 2:2 ratio which simplifies to a 1:1 ratio and the formula is written as such - MgO.

Hope this helps!

Hi

i hope this helps

Answer:

The Greek atom theory

Explanation:

The concept of the Greek atomos theory is an indivisible particle of matter, goes back to ancient Greece and a man named Democritus held that all matter could be subdivided only until some finite particle was reached.

Answer: 2

Explanation:

A combustion reaction must include O2 as a reactant.

An inorganic substance almost never includes carbon.

So, by process of elimination:

1. Carbon is a reactant = probably not

2. Has O2, no carbon = yes

3. O2 is not a reactant = no

4. Carbon is a reactant = probably not

An example of the combustion of an inorganic substance is:

2 Ca + O₂ ⇒ 2 CaO

We have 4 reactions and we want to determine which is an example of combustion of an inorganic substance.

A combustion reaction is a reaction in which a substance reacts with oxygen gas, releasing energy in the form of light and heat.

Organic substances always contain carbon while most inorganic substances do not contain carbon.

Let's consider the following reactions.

This is a combustion reaction but C₃H₈ is an organic substance.

This is an example of the combustion of an inorganic substance.

This is not a combustion reaction.

This is a combustion reaction but CH₃COOH is an organic substance.

An example of the combustion of an inorganic substance is:

2 Ca + O₂ ⇒ 2 CaO

Learn more about combustion here: https://brainly.com/question/4155165

it is push i think to move the car

Answer:

Either A. Push or B.Pull because the truck is either pushing or pulling the car to move it. So it depends on if it's pushing or pulling the car.

Explanation:

Answer: (a) [tex]\Delta S^{0}[/tex] = - 242.2J/K.mol

              (b) [tex]\Delta S^{0}[/tex] = 163.34J/K.mol

              (c) Yes

Explanation: Entropy is the measure of randomness or disorder of a system. Standard Entropy has the symbol [tex]S^{0}[/tex].

Mathematically, Entropy is defined as

[tex]\Delta S^{0}=\Sigma S^{0}(products)-\Sigma S^{0}(reagents)[/tex]

Each substance has its own entropy value.

(a) Combustion of Methane:

[tex]CH_{4}+2O_{2}[/tex] ⇒ [tex]CO_{2}+2H_{2}O[/tex]

Using standard entropy table, entropy will be:

[tex]\Sigma S^{0}(products)=214+2(69.91)[/tex] = 353.8

[tex]\Sigma S^{0}=186.264+2(205.138)[/tex] = 596.54

[tex]\Delta S^{0}=[/tex] 353.8 - 596.54

[tex]\Delta S^{0}=[/tex] - 242.2

Standard Entropy for combustion of methane is [tex]\Delta S^{0}=[/tex] - 242.2 J/K.mol.

(b) Hydrolysis of Water:

[tex]H_{2}O_{(l)}[/tex] ⇒ [tex]H_{2}_{(g)}+1/2O_{2}_{(g)}[/tex]

[tex]\Sigma S^{0}(products)=130.684+0.5(205.138)[/tex] = 233.253

[tex]\Sigma S^{0}(reagents)=69.91[/tex]

[tex]\Delta S^{0}=[/tex] 233.253 - 69.91

[tex]\Delta S^{0}=[/tex] +163.34

Standard Entropy for hydrolysis of water is [tex]\Delta S^{0}=[/tex] + 163.34 J/K.mol

(c) Yes, the results prove the general rule: Reactions Entropies are positive for net formation of gas and negative for net reduction of gas. This happens because, as entropy is the measure of disorder, the entropy for gases are greater than for liquids and solids. So, when there is formation of a gas, Entropy increases and when there isn't, entropy decreases.

Answer:

BIPHASIC LIQUIDS are used ear cleaning, to softening the wax so that mild infections can be treated.

Explanation:

BIPHASIC LIQUIDS are liquids that contain two immiscible phases, one is suspension and the other is emulsion. In suspension, the finely solid are dispersed in a liquid or semi solidwhich is use for medicament

The emulsion consist of immiscible liquids, one is dispersed in globules.

They are used ear cleaning, to softening the wax so that mild infections can be treated.

Answer:

E

because it forms the ionic bond but not covalent.

It's answer is c. N2

The maximum bond energy is of N2 because N2 molecule is formed by 3 covalent bonds and O2 molecule is formed by 2 covalent bonds.

Hope it helps :)

Answer:

The major innovation made from Abacus to the present fifth generation​ is explained below in details.

Explanation:

Industrial Age - 1600

John Napier, a Scottish noble and diplomat consecrated much of his holiday time to the learning of mathematics. He was particularly engrossed in devising methods to aid estimates. His most famous offering was the discovery of logarithms. He listed logarithmic measures on a set of 10 board rods and thus was capable to do multiplication and division by equaling up numbers on the poles. These became recognized as Napier’s Bones.

Answer:

x = w/v

General Formulas and Concepts:

Pre-Algebra

Explanation:

Step 1: Define

v = w/x

Step 2: Solve for x

Answer:

Water from melting snow or rainfall infiltrates into cracks in rocks. ... As this process of freezing and thawing happens repeatedly, the rock begins to weaken and eventually breaks apart into angular fragments.

Explanation:

Water melting from snow or rainfall which infiltrates into cracks in rocks,  this is repeated process of freezing and thawing,  the rock begins to weaken and eventually breaks apart into angular fragments.

A rock can be formed due to the aggregation of mineral constituents in the earth’s crust and  it can be classified is based on different factors like Geological classification, Physical classification, Chemical classification.

Geological classification can be either Sedimentary rock formed by the deposition of sediments by the weathering of pre-existing rocks and it can be carried out by various agents like water, wind, gravity, etc.

Igneous rocks formed  by the  solidification of magma below the earth’s surface which is held together below the earth’s surface and unable to descend, when these magma cools down  and solidifies into igneous rocks.

Learn more about rock layer, here:

brainly.com/question/21634781

#SPJ6

Explanation:

Kendrick gave the bat potential Energy

Answer:

B

Explanation:

The second one is not balanced correctly.

2 NaOH + 2HNO3 → 2NaNO3 + 2 H20

I didn't notice this before but it can be balanced without the twos.

 NaOH + HNO3 → NaNO3 +  H20

It was still wrong. It needed to have the twos removed, not 2 more added. Adding two more isn't wrong, but it should be balanced without 2s if at all possible.

The equation is balanced. There are 4 aluminium atoms and 6 oxygen atoms on each side.

Answer:

The phosphorus ylide reacts with the aldehyde or ketone to make an oxaphosphetane.

Explanation:

The Wittig reaction is a reaction that occurs between a phosphorus ylide and an aldehyde or ketone. The final products are an alkene and triphenyl phosphine oxide.

The first step in the reaction is the attack of the phosphorus ylide on the aldehyde or ketone. This is followed by attack of oxygen on phosphorus to form a [2+2] cycloaddition product (oxaphosphetane)  which  decomposes to form the alkene and triphenylphosphine oxide.

Answer:

i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right

Explanation:

Answer:

i do believe it is C. Chemical energy in food is transformed into mechanical energy as our body rides a bicycle down the street. but if i am wrong plz don't come at me but i believe that is right

Explanation:

Answer:

1. 0.28M

2. 24mL

3. 0.002295moles of NaOH.

Explanation:

1. The 6.0M HCl solution is diluted from 35mL to 750mL, that is:

750mL / 35mL = 21.43 times

The 6.0M HCl solution is diluted 21.43 times, the final concentration is:

6.0M / 21.43 = 0.28M

2. First, we need to convert grams of CuNO3 to moles and then, as molarity is moles per liter we can solve for volume of solution in liters and convert it to mililiters:

Moles CuNO3 -Molar mass 124.9g/mol:

2.49g * (1mol / 124.9g) = 0.020 moles of CuNO3

Volume is:

0.020 moles * (1L / 0.830mol) = 0.0240L * (1000mL / 1L) = 24mL

3. In 13.5mL = 0.0135L of 0.17M NaOH the moles are:

0.0135L * (0.17mol / L) = 0.002295moles of NaOH

Answer:

Chemistry deals with matter, and there is a tremendous variety of matter in the universe. The behavior of matter depends on the type of elements that are present and on the structure of those elements—how they are connected to make a molecule. In this exercise, you will evaluate some representative models to develop the rules used to classify a compound, to predict the formula of a compound, and to name the compound. This exercise is just the beginning of the work needed to be done to master the rules of writing formulas and nomenclature. Your textbook has tables of the names and formulas of common cations and anions, and discusses the rules of nomenclature in detail. You will need to spend some time with this material, as the formal rules of nomenclature may not be presented in lecture, although they will certainly be used in discussions of Lewis structures and reaction chemistry.

Explanation:

In a covalent compound, valence electrons are shared between the two atoms in the bond. These can be evenly shared (covalent bond) or unevenly shared (polar covalent bond). In an ionic bond, electrons are localized to one of the atoms (giving it an overall negative charge), while the other atom has an overall positive charge. The difference in electronegativity between the two atoms in the bond can help predict whether the bond is likely to be ionic, covalent, or polar covalent, as can the type of atoms involved (metals or non-metals). A bond with two identical atoms is always pure covalent, while a covalent bond with two different atoms is likely to be polar covalent.

Answer:

Krypton (Kr)

Explanation:

Nonmetals are the elements that have opposing features and characteristics of metals. Nonmetals do not shine and are dull in appearance. They are bad conductors of heat and electricity. They are brittle and cannot be beaten into sheets. The density, melting and boiling points of the nonmetals are low. Krypton (Kr) is a non metal whose atomic number is 36.

Answer:

Coefficients represents no of moles while subscripts represent no of atoms.

Answer:

Coefficients came before formula . Example = 4CO means there are 4 molecules of carbonmonooxide.

Subscripts came after and below the formula . Example = Oxygen gas in which 2 is a subscript which means there are 2 atoms of Oxygen in 1 molecule of Oxygen i.e. oxygen gas

The ratio of concentration of ammonia and ammonium chloride : 0.05

Given

pOH=5

Kb for NH3 =1.8 x 10-4

Required

The ratio of concentration of ammonia (NH₃) and ammonium chloride(NH₄Cl)

Solution

Solutions containing ammonia and its salt: ammonium chloride are called alkaline buffers

Can be formulated : ( for the same of the volume, mol=concentration)

[tex]\tt \displaystyle [OH-]=Kb\times\frac{weak\:base\:mole}{salt\:mole\times valence}[/tex]

pOH=-log [OH⁻]

pOH=5⇒[OH⁻]=10⁻⁵

Valence for NH₄Cl = 1, so the concentration ratio :

[tex]\tt 10^{-5}=1.8\times 10^{-4}\times \dfrac{[~NH_3]}{[NH_4Cl]}\\\\0.05=\dfrac{[~NH_3]}{[NH_4Cl]}[/tex]

Answer:

[tex]U_2=48.3kJ[/tex]

Explanation:

Hello!

In this case, since the fist law of thermodynamics helps us to understand how the change in internal energy is defined in terms of the head added to the system and the work done by the system:

[tex]Q+W=\Delta U[/tex]

In such a way, since 8.3 kJ of heat are absorbed by the system, 3.5 kJ are done by the system and the initial internal energy is 43.5 kJ, the final internal energy turns out:

[tex]U_2=U_1+Q-W\\\\U_2=43.5kJ+8.3kJ+3.5kJ\\\\U_2=48.3kJ[/tex]

Best regards!

Answer:

the answer is b

Explanation:

brcause the gravutational pull on the moon is lower than on earth...

Answer:

-189.55°C

Explanation:

Given data:

Initial volume of gas = 3.6 L

Final volume of gas = 15.5 L

Initial temperature = ?

Final temperature = 87°C (87+273 = 360 K)

Solution:

The given problem will be solve through the Charles Law.

According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.

Mathematical expression:

V₁/T₁ = V₂/T₂

V₁ = Initial volume

T₁ = Initial temperature

V₂ = Final volume  

T₂ = Final temperature

Now we will put the values in formula.

V₁/T₁ = V₂/T₂

T₁  = V₁T₂  /V₂

T₁   = 3.6 L × 360 K / 15.5 L

T₁   = 1296 L.K / 15.5 L

T₁  = 83.6 K

Kelvin to °C:

83.6 K - 273.15 = -189.55°C

Answer:

A

Explanation:

I took a test like this and my teacher said this was right so ye. hopefully I remembered correctly if its wrong im sorry ;C

Answer: A

Explanation: A thunderstorm forms when warm, moist air rises into cold air. Hope this helps. :)