Answer:
The amount of gravitational potential energy an object has depends on its height and mass. The heavier the object and the higher it is above the ground, the more gravitational potential energy it holds. Gravitational potential energy increases as weight and height increases.
Answer:
A rock and a drilled nail
Explanation:
Both objects are not moving potential energy means no movement no energy and both objects never move
help plzzzzzzz i need thissssssssss
Answer:
The final graph
Explanation:
The graph that curves downwards is negative acceleration. While the position decreases the slop increases.
a pulley is used to lift a 2000 N safe over frosty's head. the safe is lifted 6m in 4s by Rudolph. how much power did Rudolph use?
Answer:
3000W
Explanation:
Given parameter:
Weight of safe = 2000N
Height of lift = 6m
Time = 4s
Unknown:
Power used by Rudolph = ?
Solution:
Power is the rate at which work is being done. It is expressed as:
Power = [tex]\frac{Work done }{Time taken}[/tex]
Work done = Weight x height = 2000 x 6 = 12000J
Power = [tex]\frac{12000}{4}[/tex] = 3000W
the ratio of the rise to the run of a line on a graph (steeper line = faster speed)
Most metals have...
a. Atoms that are spread out, and low specific heats
b. Atoms that are close, and low specific heats
c. Atoms that are spread out, and high specific heats
d. Atoms that are close, and high specific heats
Who invented scuba?
1. Benjamin Franklin
2. Mathew Maury
3. Robert Falcon Scot
4. Cousteau and Gagnon
Answer:
2. Mathew Maury
Explanation:
2. Mathew Maury
4. Cousteau and Gagnon
Explanation:
they made the first successful scuba in 1942
What is radioactive dating? How is it used to determine age of something?
answer 2 question basically please Help!!!
Answer:
Technique of comparing abundance ratio between radioactive isotopes to a reference isotope to determine the age of a material called radioactive dating. It determines the age by having a more abundance of isotopes in the cellular being.
a ball has the speed of 4.0 m/s and a kinetic energy of 16 joules. what is the mass of the ball?
Explanation:
[tex]ke = \frac{1}{2} m {v}^{2} \\ m = \frac{2ke}{ {v}^{2} } \\ = \frac{2 \times 16}{ {4}^{2} } = 2kg[/tex]
All of the following processes are the ones that lead directly to the formation of sedimentary rock EXCEPT-
deposition of rock fragments.
O
freezing of water in cracks in rock.
o
melting of rock deep underground.
movement of wind that carries earth material.
Answer:
melting of rock deep underground.
Explanation:
The melting of rocks deep underground does not produce sedimentary rocks. Most igneous rocks are produced by this process.
When molten rocks underground called magma is solidified in the subsurface, it results into the formation of igneous bodies.
Sedimentary rocks forms by the accumulation of sediments. Inside the basin where the sediments are deposited, they are compacted, cemented and lithified. Chemical and physical weathering of rocks produces sediments.What is the net force EF?
Answer:
Physics Net Force
Explanation:
Physics Net Force
The net force is the combined force of all individual forces acting on an object. Newton's First Law can be seen to be the special case in the Second Law when F, the net force, is zero. When that happens, the acceleration a must also be zero.
Hope this helped you!!
what do you understand by the term current state and define its SI unit.........
Answer:
Explanation:
Current refer to the rate at which electric charge flow or run or move in an electric circuit . It is measured in Ampere or coulumb per second.
The SI unit is Ampere and it is represented by A. It is a scalar quantity.
1 Ampere is the current that will produce an attractive force of 2 × 10^-7 Newton per meter of length between two parallel conductors.
Tyler and his family drove from Atlanta to Baltimore. They traveled a total of 678 miles over 2 days.
What is the reference point in this scenario?
Atlanta
Baltimore
678 miles
2 days
Answer:
atlanta
Explanation:
just took the test
The reference point in this scenario is Atlanta.
What is reference point of the journey?The can be described as the starting point of the entire journey.
From the given statements the family started the journey from Atlanta and then traveled to Baltimore.
Atlanta is the start point (reference point) while Baltimore is the destination (finishing point).
Thus, the reference point in this scenario is Atlanta.
Learn more about reference point here: https://brainly.com/question/2037494
Showing results for a 4 olm and 8 ohm resistor are connected in series. The current through the 4 olm resistor is 2 amps. What is the current through the 8 olm resister?
Plzzzz help 20 points
Answer:
Let R1= resistance of 4ohms
R2= resistance of 8ohms
Equivalent resistance R will be
R=R1 + R2
=> 4+8=12ohms
The current through the two resistors will be the same since they are connected in series. Notwithstanding, the voltage will drop to appreciate the change.
Explanation:
The value of current from the 8-ohm resistor is the same as in the 4-ohm resistor which is equal to the 2 Amp.
What is resistance?Resistance is a type of opposition force due to which the flow of current is reduced in the material or wire. Resistance is the enemy of the flow of current.
When two resistors are connected to the series in that condition the value of current is the same in both the resistors.
While the value of resistance is different in both the different.
Hence the value of current from the 8-ohm resistor is the same as in the 4-ohm resistor which is equal to the 2 Amp.
To learn more about the resistance refer to the link;
https://brainly.com/question/20708652
A wire of resistance R is cut into ten equal parts which are then connected in parallel. The equivalent resistance of the combination is
Answer:
The equivalent resistance of the combination is R/100
Explanation:
Parallel Connection of Resistances
If resistances R1, R2, R3,...., Rn are connected in parallel, the equivalent resistance is calculated as follows:
[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}+...+\frac{1}{R_n}[/tex]
The electric resistance of a wire is directly proportional to its length. If a wire of resistance R is cut into 10 equal parts, then each part has a resistance of R/10.
It's known the 10 parts or resistance R/10 were connected in parallel, thus the electric resistance is:
[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R/10}+\frac{1}{R/10}+\frac{1}{R/10}+...+\frac{1}{R/10}[/tex]
Note the sum consists of 10 equal terms. Operating on each term:
[tex]\displaystyle \frac{1}{R_e}=\frac{10}{R}+\frac{10}{R}+\frac{10}{R}+...+\frac{10}{R}[/tex]
The sum of 10 identical fractions yields 10 times each fraction:
[tex]\displaystyle \frac{1}{R_e}=10\frac{10}{R}=\frac{100}{R}[/tex]
Solving for Re needs to take the reciprocal of both sides of the equation:
[tex]R_e=R/100[/tex]
The equivalent resistance of the combination is R/100
You may have noticed that there was a big difference in the results of
the two hollow pipe experiments, but very little difference in the solid chunk experiments.
Why do you think this was the case?
ANSWER QUICK PLS!
Answer:
For conduction you don't need position. For convection you do.
Explanation:
you just needed to look it up LOL <3
How does work affect energy between objects so it can cause a change in the form of energy?
Sol
Work transfers energy.
O Work changes energy
O Work increases energy.
O Work decreases energy.
Answer:
Doing work' is a way of transferring energy from one object to another, energy is transferred when a force moves through a distance.
Explanation: So more energy, more work done bc u transferred more energy to move the object and doing the work. and if you only use a little of energy, the work done also only a little.
9. Does a blackbody radiator emit light waves? Explain.
Answer:
"A blackbody is an object that absorbs all of the radiation that it receives(that is,it does not reflect any light,nor does it allow any light to pass through it and out the other side).The energy that the blackbody absorbs heats it up,and then it will emit its own radiation."
Explanation:
Risk*
a catcher "gives" with the ball when he catches a 0.196 kg baseball moving at 31 m/s. if he moves his glove a distance of 5.32 cm, what is the average force acting on his hand?
Answer:
3540.5N
Explanation:
Step one:
given data
mass m= 0.196kg
speed v= 31m/s
distance r= 5.32cm = 0.0532m
Step two
The expression relating force, mass, velocity and distance is
F= mv^2/r
substitute we have
F=0.196*31^2/0.0532
F=0.196*961/0.0532
F=188.356/0.0532
F=3540.5N
plzz help.me with both questions
Explanation:
Primary cell
1. They are non-rechargeable.
2. The energy density of primary cells is more.
3. The internal resistance of primary cells is more.
4. Example : Zinc-Carbon cell.
Secondary cells
1. They are rechargeable cells.
2. The energy density of secondary cells is less.
3. The internal resistance of secondary cells is less.
4. Example : Car batteries
Current :
The flow of electric charge per unit time is called electric current. It can be given by the formula as follows :
[tex]I=\dfrac{q}{t}[/tex]
The SI unit of electric current is Ampere.
1 Ampere is defined as the current that flows with the electric charge of one Coulomb per second (C/s).
How does the antireflective coating applied to the protective glass on a solar cell maximize the energy absorbed by the solar cell?
A. It helps the glass transmit the energy
B. It helps the glass reflect the energy that hits it
C. It stops the top semiconductor layer from absorbing too much energy
D. It stops the bottom semiconductor layer from absorbing too much energy
Answer:
A
Explanation:
The antireflective coating applied to the protective glass on a solar cell maximize the energy absorbed by the solar cell as it helps the glass transmit the energy. The correct option is A.
The antireflective coating added to the protective glass of a solar cell is intended to reduce light reflection from the glass's surface.
More light may flow through the glass and reach the solar cell underneath it by decreasing reflections. This permits the solar cell to absorb more energy from the sun, increasing its efficiency in converting light into electricity.
The antireflective coating guarantees that a larger proportion of incident light is passed through the glass by decreasing reflection, allowing the solar cell to gather and use more energy.
Thus, the correct option is A.
For more details regarding antireflective coating, visit:
https://brainly.com/question/33351225
#SPJ2
explain why smoke particles in air move about faster if the temp of the air is increased??
Answer:
kinetic energy increases with the energy which causes the particles to move faster resulting in increases collision rates and rate of diffusion.
Explanation:
The increase in temperature of the air causes the air molecules to have more kinetic energy, which leads to more frequent and forceful collisions with the smoke particles. This, in turn, causes the smoke particles to move faster through the air.
What is kinetic energy?Kinetic energy is the energy an object possesses due to its motion. Any object that is in motion has kinetic energy, and the amount of kinetic energy it has depends on its mass and velocity.
The formula for calculating kinetic energy is:
KE = 1/2 × m × v²
where KE represents kinetic energy, m represents the mass of the object, and v represents the velocity of the object.
Here in the question,
Smoke particles in the air move around due to collisions with air molecules. When the temperature of the air increases, the average kinetic energy of the air molecules also increases. This means that the air molecules are moving faster and colliding more frequently with the smoke particles.
The smoke particles themselves do not have an increase in kinetic energy, but they do receive more energy from the collisions with the air molecules. This extra energy causes the smoke particles to move faster and more erratically, making them more dispersed throughout the air.
In addition, when air is heated, it becomes less dense. This means that there are fewer air molecules in a given volume of air. As a result, the smoke particles have more space to move around and collide with air molecules, which further contributes to their increased speed and movement.
Therefore, increasing the temperature of the air increases the speed and frequency of collisions between the air molecules and smoke particles, leading to the smoke particles moving faster and more widely dispersed throughout the air.
To learn about the conversion of Kinetic energy click:
https://brainly.com/question/12807194
#SPJ3
Diffraction is useful in which of the following fields?
a. calculus
b. anthropology
c. astronomy
d. astrology
When wax is heated, it turns into a liquid. How are the wax molecules affected by this change of state?
The molecules gain energy
The molecules lose energy
The molecules move closer to one another
The space between the molecules increase
The space between the molecules decrease
Answer:
the CORRECT answer is the "molecules gain energy" because with heating comes energy transferring into the wax molecules. and "the space between the molecules increases" because the molicules will want to space apart because of the heat
Explanation:
Answer: the molecules gain energy, The space between the molecule increases
Explanation:
i got the sauce (plato)
How are the molecules in a gas different from molecules in other states of matter?
Answer: The molecules in gases are different from other states of matter
Explanation:
The molecules in gases are different from other states of matter because unlike, for example, a solid, they move around freely and are much more spread apart. A gas can fill up any container, but once the container is unsealed, the gasses will immedietly be let out. Gases can be compressed much more easily than a solid or a liquid.
Using the information given, find the number of Electrons of the unknown element: 6 PROTONS, 6 NEUTRONS, 12 ATOMIC MASS
Answer:
the answer is 24 you are correct
Explanation:
how much power does it take to lift 30 kg 10n high in 5sec
Answer:
the answer is 60 w. i hope this helps
The image shows a type of fault.
What stress causes this type of fault to form?
A. Compression
B. Gravity
C. Tension
D. Shearing
Answer:
D. Shearing
Explanation:
D. Shearing
The Answer is: Shearing
A statue of a great baseball player weighs 2400 N and has a base that is 4 m x 2 m. What is the pressure the statue exerts on the floor?
Answer:
300N/m²
Explanation:
Pressure is calculated using the formula;
Pressure = Force/Area
Given
Force = 2400N
Area = 4m×2m = 8m²
Substitute the given parameters into the formula as shown;
Pressure = 2400/8
Pressure = 300N/m²
Hence the pressure the statue exerts on the floor is 300N/m²
Visible light is the _______ that our eyes can see.
Answer:
Spectrum because it could respond to a specific color based upon how you humans typically perceive Lights of the wavelength
Answer:
spectrum
Explanation:
Between ball B and ball C, ball ____ has LESS potential energy because ___
a: c;its mass is greater
b: b;its mass is smaller
c: c; its mass is smaller
d: b;its mass is greater
Answer: b
Explanation:
Ec= (1/2)m × v^2
By the formula, you can see that the bigger the mass, the bigger the Cinetic Energy.
b: b; its mass is smaller
Between ball B and ball C, ball B has LESS potential energy because its mass is smaller.
A potential energy, stored energy that depends upon the relative position of various parts of a system. A spring has more potential energy when it is compressed or stretched.
Potential energy is given by formula.
[tex]P.E= m*g*h[/tex]
Since, P.E is directly proportional to mass. Thus, the ball having smaller mass will have the less P.E.
Thus, option b is correct.
Learn more:
brainly.com/question/13584911
Why is a protective apron or lab coat important to use when working with acids?
Acids conduct electricity and contact could cause a shock.
Acids react with lipids and can cause damage to skin tissue.
Acids break down fabrics and can cause burns if the acids are strong.
Acids have a slippery feel and could result in a fall.
Answer:
Acids break down fabrics and can cause burns if the acids are strong.
Explanation:
When working with acids, it is advisable for a scientist for wear a protective apron or lab coat because acids break down fabrics and can cause burns.
Acids are chemical substances that produces excess hydroxonium ions in solutions.
Due to their unique properties they are highly corrosive and are used to remove rusts from any surface. We they come in contact with the human body, they can cause severe burns especially if they are very strong acid. If an apron is worn, then the body will be shielded.Answer:
C. Acids break down fabrics and can cause burns if the acids are strong.
Explanation:
i did the quiz on edg