Answer:
.
Explanation:
mercurygalliumboronberylliumYou have 250.0 mL of 4.00 M sugar solution. You added 216.1 mL of water to this solution. Determine the concentration of the sugar solution after the addition of water.
Answer:
[tex]M_2=2.15M[/tex]
Explanation:
Hello!
In this case, since the dilution processes are characterized by the addition of extra solvent, in this case water, to an initial solution in order to decrease the concentration of the solute, in this case sugar; as water is added, the moles of sugar remain unchanged, so the following equation can be written:
[tex]n_1=n_2\\\\M_1V_1=M_2V_2[/tex]
Whereas 1 accounts for the initial 250.0 mL of 4.00 M sugar and 2 for the concentration at the new volume which is:
[tex]V_2=250.0mL+216.1mL=466.1mL[/tex]
Thus, the final concentration is:
[tex]M_2=\frac{M_1V_1}{V_2} =\frac{250.0mL*4.00M}{466.1mL} \\\\M_2=2.15M[/tex]
Best regards!
7. Which of the following pairs of elements is most likely to form an ionic
compound?
b. potassium and neon
c. barium and aluminum
a. oxygen and fluorine
d. lithium and bromine
Answer:
not sure if this us right but oxygen and fluorine? I learned chem but I forgot about it kinda sorry
100
80
100 mL
water vapor
Which statement describes what will happen if a student pushes the plunger
to compress the water vapor?
A. The total number of water particles will increase.
B. The amount of energy in the water particles will decrease.
C. The amount of empty space between the water particles will
decrease
D. The total volume of the water particles will increase
I will mark brainliest
Answer:
Explanation:it is c
Answer:
C The amount of empty space between the water particles will decrease
Explanation:
I just took the quiz, have a nice day!
All of these affect weather except!
A. Air pressure
B. Humidity
C. Barometer
D. Wind speed
Answer:
C.Barometer
Explanation:
How many molecules of carbon tetrachloride are equal to 0.25moles
A 2.52 L container of oxygen gas at 28.6 °C is heated to 45.9 °C. Assuming that the volume of the container can vary, what is the new volume of the gas?
Answer:
4.04433566 L (433566 repeating)
Explanation:
2.52 is divided by 28.6 is 0.0881118 (881118 repeating). multiply 0.0881118 (881118 repeating) by 45.9 to get 4.04433566 L (433566 repeating).
A chemist combine did 3.50g of potassium level with chlorine gas to yield 6.6 7g of potassium for it. Assuming all the potassium was consumed, and that potassium chloride was the only product that formed, what mass of chlorine reacted?
Answer: mass of chlorine reacted is 3.18 g
Explanation:
2 K + Cl2 = 2KCl
no. of moles of K = mass / molar mass
= 3.50 / 39
= 0.0897
no. of moles of KCl = mass / molar mass
= 6.67 / 74.5
= 0.0895
no. of moles of Cl2 required = number of moles of KCl / 2
= 0.0895 / 2
= 0.0448 moles
mass of Cl2 required = no. of moles of Cl2 required x molar mass
= 0.0448 x 71
= 3.1808 g ≈ 3.18 g
Therefore mass of chlorine reacted is 3.18 g
What do you think is the common link between each of the phenomena shown?
Answer:
sounds wave
Explanation:
From alarm, microwave, laser, TV, water waves and a musical instrument, everything release sounds.
(Not the same)
If it convinced you please add this in the brainlist
When [H+] = 4.0 × 10–9 M in water at 25°C, then
Kw =1.0×10–14.
b. pOH = 7.
c. [H3O+] = [OH–].
d. pH= 7
e. A-D are all correct
Answer:
a. Kw = 1.0 × 10⁻¹⁴
Explanation:
a. Let's consider the self-ionization of water.
2 H₂O(l) ⇄ H₃O⁺(aq) + OH⁻
The ion-product of water (Kw) at 25 °C is:
Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴
c. Considering [H⁺] = [H₃O⁺] = 4.0 × 10⁻⁹ M, the concentration of OH⁻ is:
[OH⁻] = 1.0 × 10⁻¹⁴/[H₃O⁺] = 2.5 × 10⁻⁶ M
b. We can calculate the pOH using the following expression.
pOH = -log [OH⁻] = -log 2.5 × 10⁻⁶ = 5.6
d. We can calculate the pH using the following expression.
pH = -log [H⁺] = -log 4.0 × 10⁻⁹ = 8.4
When [H+] = 4.0 × 10–9 M in water at 25°C, then the [tex]Kw =1.0\times 10^-^1^4.[/tex]
What is dissociation constant?
Kw is the dissociation constant or ionization constant of water.
The self-ionization of water will be
[tex]\rm 2 H_2O(l) = H_3O^+(aq) + OH^-[/tex]
The dissociation constant of the water at 25°C will be
[tex]\rm Kw = [H_3O^+][OH^-] = 1.0 \times 10^-^1^4[/tex]
Thus, the correct option is a. [tex]Kw =1.0\times 10^-^1^4.[/tex]
Learn more about dissociation constant
https://brainly.com/question/3657057
How many known elements have atoms, in their ground-state, with valence electrons whose quantum numbers are n = 5 and l = 1?a. 36..
b. 37.
c. 6.
d. 8.
Answer:
c. 6.
Explanation:
Looking at the description given in the question, the elements involved must belong to the p- block of the periodic table and must be in period 5. They also must possess valence electrons in the 5p- orbital.
Now if we look at the p- block of period 5, the following elements satisfy these requirements; Sr, In, Sn, Sb, Te and I.
Hence there are six of such elements.
The chemical elements that have atoms, in their ground-state, with valence electrons whose quantum numbers are n = 5 and l = 1 are: C. 6.
What is a valence electron?A valence electron can be defined as the number of electrons that is present in the outermost shell of an atom.
In Chemistry, valence electrons are primarily used to determine whether an atom or group of chemical elements that are found on the periodic table can bond with others.
Based on electronic configuration, quantum numbers of n = 5 and l = 1 simply represents a 6p orbital and there a total of six (6) chemical elements with this orbital, and these include;
ThalliumLeadRadonAstatinePoloniumBismuthRead more on valence electrons here: https://brainly.com/question/16554158
500 grams of an unknown substance gains 23000 J of heat as it is heated from a temperature of 250C to 1250C. Using mathematical computation and the chart below, determine the identity of the unknown substance.
Answer:
The given substance is cast iron.
Explanation:
Given data:
Mass of substance = 50 g
Heat absorbed = 23000 J
Initial temperature = 250°C
Final temperature = 1250°C
Which metal is this = ?
Solution:
Specific heat capacity:
It is the amount of heat required to raise the temperature of one gram of substance by one degree.
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 1250°C - 250°C
ΔT = 1000°C
23000 j = 50 g ×c ×1000 °C
23000 J = 50,000 g. °C×c
c = 23000 J /50,000 g. °C
c = 0.46 J/g.°C
The given substance is cast iron.
FeO+ PdF2 ---> FeF2+PdO balance please worth 50 points
Answer: FeO
Explanation:
Answer:
This is not worth 50 points liar
Explanation:
Which molecule/molecular compound is joined by a single covalent bond? O2 or N2 or Br2 or CO2?
who want to play among us
Answer:
Meh i want to play
UwU
:)
Answer: yeah sure lad
Explanation:
How much water would need to be added to 1092 mL of a 54.7 M NaCl solution to make a 0.25 M solution?
Answer:
237.8L of water would need to be added.
Explanation:
The first thing to do is to identify that the equation to be used is M1V1=M2V2. (This equation works because it turns everything into moles which can then be compared).
Then figure out what information you have and what is being found. In this case:
M1 = 54.7 M
V1 = 1092 mL = 1.092 L
M2 = 0.25 M
V2 = unknown
Then solve the equation for whatever you are trying to find.
M1V1=M2V2
V2=M1V1/M2
Now you need to plug everything in.
V2=(54.7M*1.091L)/0.25M
V2=238.93L
That means that the solution needs a volume of 238.7L to gain a molarity of 0.25M but the starting solution already had a volume of 1.092 L meaning that to find the amount of solvent that needs to be added you just subtract the starting volume by the volume that the solution needs to be.
238.93L - 1.091L = 237.8L
Therefore the answer is that 237.8L needs to be added to a 1.092L 54.7M NaCl solution to make the concentration 0.25M.
I hope this helps. Let me know if anything is unclear.
is pure water a solution
Answer: No because a solution is a homogeneous MIXTURE of two or more substances. Water is a pure substance. It is made of hydrogen and oxygen, but shares none of their properties. So it’s pure.
Explanation:
The heat of vaporization of diethyl ether is . Calculate the change in entropy when of diethyl ether boils at . Be sure your answer contains a unit symbol. Round your answer to significant digits.
Answer:
[tex]\Delta S=900\frac{J}{K}[/tex]
Explanation:
Hello!
In this case, since the information is not missing, the following one will be used as it is found on similar problems:
[tex]\Delta h=26.7kJ/mol\\T_b=34.6\°C\\m=769.0g[/tex]
In such a way, we use the following equation to compute the entropy:
[tex]\Delta S=\frac{n\Delta h}{T_b}[/tex]
Whereas n (moles) are computed by using its molar mass (74.14 g/mol) as follows:
[tex]n=769.0g*\frac{1mol}{74.14g}=10.4mol[/tex]
[tex]\Delta S=\frac{10.4mol*26.7\frac{kJ}{ml} }{(34.6+273.15)K}\\\\\Delta S=0.900 \frac{kJ}{K} \\\\\Delta S=900\frac{J}{K}[/tex]
Best regards!
Why is it possible for an active metal like aluminum to be useful as a structural metal?
Answer:
Aluminum even after being an active metal is used as a structural metal due to its toughness, high strength, lightweight, and resistance to the process of corrosion. It is resistant to corrosion as its reactivity gets suppressed due to the formation of an aluminum oxide film which is protective in nature, on its surface. Passivation is the term for the formation of the protective coating.
why are there different types of matter.
Answer:
solid ; liquid and gas........
Please help me ASAP
500.0 liters of a gas are prepared at 700 mm Hg and 200 C. The gas is placed into a tank under high pressure. What is the volume of the gas?
Answer: 143*tank temperature/tank pressure L
Explanation: too few data. Need to know the pressure and what if any, temperature change.
tank volume = (tank temp/tank pressure)*(500*200/700) = 143*tank temp/tank pressure L
At constant temperature, (500*700)/tank temp
e.g. at 1400mm Hg, 500*700/1400 = 250L
17 Which changes decrease the rate of reaction between magnesium and air?
1.heating the magnesium to a higher temperature
2.using a higher proportion of oxygen in the air
3.using magnesium ribbon instead of powdered magnesium
A 1, 2 and 3
B 1 only
C 2 only
D 3 only
Using magnesium ribbon instead of powdered magnesium decrease the rate of reaction between magnesium and air.
What is rate of reaction?Rate of reaction tells about the duration of the completion of the reaction.
Rate of any reaction is directly proportional to the concentration and surface area of the reactant, temperature, catalyst, no. of collision, activation energy, etc.
So, if we magnesium in the ribbon instead of powdered magnesium the surface area of the reactant side decreases which results in the decrease of the rate of reaction.
Hence, option (D) is correct i.e. rate of reaction decreases on using magnesium ribbon instead of powdered magnesium.
To know more about rate of reaction, visit the below link:
https://brainly.com/question/1898560
Andesitic rock is an igneous rock with a composition in between that of basaltic and granitic igneous rock.
true or false
Answer:
Explanation:
intristing
In what way is cellular respiration like breathing?
Answer:Cellular respiration is not the same as breathing, but they are closely related
Explanation: When you breathe in, you take in the oxygen your cells need for cellular respiration. When you breathe out, you get rid of carbon dioxide that your cells produce during cellular respiration.
How many grams of F2 are in 3.45 x 1022 molecules of F2?
Answer:
Mass = 2.16 g
Explanation:
Given data:
Number of molecules of F₂ = 3.45 × 10²²
Mass in gram = ?
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ molecules
3.45 × 10²² molecules ×1 mol / 6.022 × 10²³ molecules
0.57× 10⁻¹ mol
0.057 mol
Mass in gram :
Mass = number of moles × molar mass
Mass = 0.057 mol × 37.9 g/mol
Mass = 2.16 g
Which of the following is not a balanced nuclear equation?
O a) 130 Sn + B + 1315b
d) 19Pt → 158 Os+ja
c) Be → 19 Li + AB
b) 2U → 1a +
234
90
Th
Ne
Answer:
¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β
Explanation:
To know which equation is unbalanced, we shall compare the mass number and atomic number of the reactant and product together. This is illustrated below:
¹²¹₅₀Sn —> ⁰₋₁β + ¹²¹₅₁Sb
121 = 0 + 121
121 = 121
50 = –1 + 51
50 = 51
Thus the above equation is balanced
¹⁹⁰₇₈Pt —> ¹⁸⁶₇₆Os + ⁴₂α
190 = 186 + 4
190 = 190
78 = 76 + 2
78 = 78
Thus, the above equation is balanced
¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β
10 = 10 + 0
10 = 10
4 = 3 + (–1)
4 = 3 – 1
4 = 2
Thus, the above equation is unbalanced.
²³⁸₉₂U —> ⁴₂α + ²³⁴₉₀Th
238 = 4 + 234
238 = 238
92 = 2 + 90
92 = 92
Thus, the above equation is balanced.
From the illustrations made above, only ¹⁰₄Be —> ¹⁰₃Li + ⁰₋₁β
Is unbalanced.
Which equation best represents the balanced net ionic equation for the reaction that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed?
Answer:
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
Explanation:
Let's consider the molecular equation that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed.
2 Li₃PO₄(aq) + 3 Mg(NO₃)₂(aq) ⇒ 6 LiNO₃(aq) + Mg₃(PO₄)₂(s)
The complete ionic equation includes all the ions and insoluble species.
6 Li⁺(aq) + 2 PO₄³⁻(aq) + 3 Mg²⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 Li⁺(aq) + 6 NO₃⁻(aq) + Mg₃(PO₄)₂(s)
The net ionic equation includes only the ions that participate in the reaction and insoluble species.
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
d Which properties of plastics cause a problem when the container is empty?
Answer: Both of these are of great concern to human health. BPA is used in many things including plastic bottles and food packaging materials. Over time the polymer chains of BPA break down, and can enter the human body in many ways from drinking contaminated water to eating a fish that is exposed to the broken down toxins.
Explanation:
I think you will get it
What is the name for the group of unreactive elements on the periodic table?
Noble Gases, at least that's what I was told. Hope that helps.
is chromate polar or nonpolar?
Answer:
i THINK so
Explanation:
im not sure tho sorry if wrong