During the phase change in which heat is being added but the temperature remains constant, the heat energy is used to break the bonds in the molecules.
What is a phase change?A phase change is the conversion of one state of matter to another. e.g. solid to liquid or liquid to gas.
Substances can exists in three states namely;
solidgaseousliquidIn a change of phase, heat energy is needed to break the existing bonds between the molecules of the initial state. For example, heat energy is needed to break the bonds of ice to form water.
However, during this phase change, the temperature remains constant.
Therefore, during the phase change in which heat is being added but the temperature remains constant, the heat energy is used to break the bonds in the molecules.
Learn more about phase change at: https://brainly.com/question/1429452
In the fishbowl, the glass, water, rocks, and plastic plants are in thermal equilibrium. This situation means the temperature of the rocks is...
The current in the wires of a circuit is 60.0 milliAmps. If the
voltage impressed across the ends of the circuit were tripled
(with no change in its resistance), then its new current would
be milliAmps.
Answer:
180 m amp
Explanation:
V = IR
v/r = i mutiply both sides by
3
3v / r = 3 i so the current will triple to 180 mAmp
You just took a bit of you favorite food. Tell a story what happens as the food passes through the alimentary canal from the foods point of view (you are the food). Discuss all the structures in which you come into contact with in the digestive system and their functions for helping digest foods. Don't forget about peristalsis, the accessory organs, and their functions as well.
Answer:
The digestive system is made up of the gastrointestinal tract—also called the GI tract or digestive tract—and the liver, pancreas, and gallbladder. The GI tract is a series of hollow organs joined in a long, twisting tube from the mouth to the anus. The hollow organs that make up the GI tract are the mouth, esophagus, stomach, small intestine, large intestine, and anus. The liver, pancreas, and gallbladder are the solid organs of the digestive system.The small intestine has three parts. The first part is called the duodenum. The jejunum is in the middle and the ileum is at the end. The large intestine includes the appendix, cecum, colon, and rectum. The appendix is a finger-shaped pouch attached to the cecum. The cecum is the first part of the large intestine. The colon is next. The rectum is the end of the large intestine
Explanation:
Assume that the body's muscle mechanism can be approximated by a spring with a uniform continuous mass distribution that follows Hooke's law. Concerning this,
A) find the effective mass of the spring with mass m.
Then, estimate the potential energy which can be mechanically stored in B) the muscles of each arm, and
C) the muscles of each leg,
and estimate the spring constant of
D) each arm muscles, and
E) each leg muscle.
F) Now, could estimate the speed of a runner by using these results?
Based on Hooke's law, the spring constant of the the body's muscle mechanism is the ratio of force to extension, the effective mass is m/3 and the potential energy that can be stored is ke^2 / 2.
What is the spring constant?The spring constant or stiffness constant of an elastic spring is constant which describes the extent a bit forceapplied to an elastic spring will extend it.
Spring constant, K = force/extensionAssuming, a body's muscle mechanism is a spring obeying Hooke's law, the effective mass of the spring with mass m is 1/3 of the mass of the spring = m/3
The potential energy that can be stored = ke^2 / 2
where K is spring constant and e is the extension produced.
Therefore, the spring constant of the the body's muscle mechanism is the ratio of force to extension, the effective mass is m/3 and the potential energy that can be stored is ke^2 / 2.
Learn more about Hooke's law at: https://brainly.com/question/12253978
list down the general of the office of guardian and tutor
Answer:
legal guardians, the four types: personal guardians, financial guardians, conservators, and pet “guardians”
15. A pattern of weather and
climate over three months is called a
Answer:
Explanation:
weather pattern
A pattern of weather over three months is called a climate.
What is climate?Climate is the long-term pattern of weather in a particular area. Weather can change from hour-to-hour, day-to-day, month-to-month or even year-to-year. A region's weather patterns, usually tracked for at least 30 years, are considered its climate.
Weather refers to short-term changes in the atmosphere, climate describes what the weather is like over a long period of time in a specific area.
A pattern of weather over three months is called a climate.
To study more about climate refer to the link:
brainly.com/question/10440860
#SPJ2
A rock is suspended from the lower end of a light string. When the rock is totally immersed in water, the tension in the string is 1.20 N. When the rock is totally immersed in ethanol, the tension in the string is 1.60 N. Calculate the weight of the rock.
For a rock is suspended from the lower end of a light string, the weight of the rock is mathematically given as
W = 3.10 N
What is the weight of the rock.?Generally, the equation for the W = Fh1+ is mathematically given as
W = Fh+T1
Where
PiVg+T1 = P2V9+T
(1000) V(9.8) + 1.2 = (790) V(9.8) + 1.6
V = 1.944* 10^-4 m3
In conclusion
W = Fh+T1
W = (1000) (1.944 * 10-4) (9.8) + 1.2
W = 3.10 N
Read more about Weight
https://brainly.com/question/11408596
What is the cycle of a breaststroke?
Answer:
Breaststroke can be divided up into 4 distinct phases, which consists of the out sweep, in sweep, breathing phase, and lunge, extension, or recovery phase.
Explanation:
pa follow po
A turntable is switched from 11.3 rad/s to 1.9 rad/s, and the platter goes through an angle of 17.95 radian in reaching the new angular speed. What is the angular acceleration of the platter?
Hi there!
We can use the angular equivalent of the following kinematic equation:
[tex]\omega_f^2 = \omega_i^2 + 2\alpha \theta[/tex]
ωf = final angular velocity (1.9 rad/s)
ωi = initial angular velocity (11.3 rad/s)
α = angular acceleration (? rad/s²)
θ = angular displacement (17.95 rad)
We can rearrange the equation to solve for angular acceleration.
[tex]\omega_f^2 - \omega_i^2 = 2\alpha \theta\\\\\alpha = \frac{\omega_f^2 - \omega_i^2}{2\theta}[/tex]
Plug in the given values and solve.
[tex]\alpha = \frac{1.9^2 - 11.3^2}{2(17.95)} = \boxed{3.456 \frac{rad}{s}}[/tex]
Radioactive isotopes can be used to find the age of rocks, fossils, or other artifacts. Carbon-14 has a half-life of 5,730 years. Suppose a sample of charcoal from a primitive fire pit contains one eighth of its original amount of carbon-14. How old is the sample?
Answer:
1/8 = (1/2)^3
This implies the sample has decayed for 3 half lives
3 * 5730 yrs = 17,200 years
In addition to their remarkable top speeds of almost 60 mph, cheetahs have impressive cornering abilities. In one study, the maximum centripetal acceleration of a cheetah was measured to be 18 m/s2. What minimum value of the coefficient of static friction between the ground and the cheetah's feet is necessary to provide this acceleration?
coefficient of static friction is 1.7329
Explanation:
given data
velocity = 60 mph
acceleration = 17 m/s²
to find out
coefficient of static friction
solution
we will apply here centripetal force equation
that is
m×v²/r = µ × m × g ..................1
here v²/r is centripetal acceleration and m is mass and µ is coefficient static friction so
µ = a / g
µ = 17 / 9.81
µ = 1.7329
so coefficient of static friction is 1.7329
A total charge of Q coulomb is uniformly distributed along a rod 40cm in length.find find the electric field intensity 20cm away from the rod along its perpendicular bisector?
For a total charge of Q coulomb is uniformly distributed along a rod 40cm in length, the electric field intensity 20cm away from the rod is mathematically given as
E1=1.598*10^11v/m
Generally, the equation for the initial electric field intensity is mathematically given as
[tex]dEp=\int{kd/r}cosd\theta[/tex]
Therefore
[tex]e1=kd/r{sin\theta2+sinR1}[/tex]
Hence
[tex]E1=(9*10^9/20*10^{-2})({sin45+sin45})*B/40*10^-2[/tex]
E1=B*9*10^{13})/(10*110)*[tex]\sqrt{2}[/tex]
E1=1.598*10^11v/m
In conclusion, the electric field intensity
E1=1.598*10^11v/m
Read more about Electric field
https://brainly.com/question/9383604
You perform an experiment to test how far a cannon will shoot a performer at
different angles. The data are shown below.
Angle
Distance (feet)
110
32°
36°
120
40°
128
440
133
48°
127
52
119
56°
109
60°
100
64°
91
68°
77
72°
63
At which angle will the performer travel the longest distance?
Answer:
44°
Explanation:
Look for the longest distance under the 'Distance ' column....look to the left to find the corresponding angle
Table clearly shows that the longest distance (133 ft) occurs at angle of 44°
A potter's wheel is spinning with an initial angular velocity of 11 rad/s . It rotates through an angle of 80.0 rad in the process of coming to rest.
What was the angular acceleration of the wheel?
How long does it take for it to come to rest?
Hi ! I will help you to discuss about Proportionally Changes in Circular Motion. The analogy of proportionally changes in circular motion is same as the analogy of proportionally changes in direct motion. Here you will hear again the terms acceleration and change in speed, only expressed in the form of a certain angle coverage. Before that, in circular motion, it is necessary to know the following conditions:
1 rotation = 2π rad1 rps = 2π rad/s1 rpm = [tex] \sf{\frac{1}{60} \: rps}[/tex] = [tex] \sf{\frac{1}{30}\pi \: rad/s}[/tex] Formula UsedThe following equations apply to proportionally changes circular motion:
Relationship between Angular Acceleration and Change of Angular Velocity[tex] \boxed{\sf{\bold{\omega_t = \omega_0 + \alpha \times t}}}[/tex]
With the following conditions:
[tex]\sf{\omega_t}[/tex] = final angular velocity (rad/s)[tex]\sf{\omega_0}[/tex] = initial angular velocity (rad/s)[tex]\sf{\alpha}[/tex] = angular acceleration (rad/s²)t = interval of the time (s)Relationship between Angular Acceleration and Change of [tex]\sf{\theta}[/tex] (Angle of Rotation)[tex] \boxed{\sf{\bold{\theta = \omega_0 \times t + \frac{1}{2} \times \alpha \times t^2}}}[/tex]
Or
[tex] \boxed{\sf{\bold{(\omega_t)^2= (\omega_0)^2 + 2 \times \alpha \times \theta}}}[/tex]
With the following condition :
[tex]\sf{\theta}[/tex] = change of the sudut (rad)[tex]\sf{\alpha}[/tex] = angular acceleration (rad/s²)t = interval of the time (s)[tex]\sf{\omega_t}[/tex] = final angular velocity (rad/s)[tex]\sf{\omega_0}[/tex] = initial angular velocity (rad/s) Problem SolvingWe know that :
[tex]\sf{\omega_t}[/tex] = final angular velocity = 0 rad/s >> see in the sentence "in the process of coming to rest."[tex]\sf{\omega_0}[/tex] = initial angular velocity = 11 rad/s[tex]\sf{\theta}[/tex] = change of the sudut = 80.0 radWhat was asked :
[tex]\sf{\alpha}[/tex] = angular acceleration = ... rad/s²t = interval of the time = ... sStep by step :
[tex]\sf{\alpha}[/tex] = ... rad/s²[tex] \sf{(\omega_t)^2= (\omega_0)^2 + 2 \times \alpha \times \theta} [/tex]
[tex] \sf{0^2= (11)^2 + 2 \times \alpha \times 80} [/tex]
[tex] \sf{0 = 121 + 160 \alpha} [/tex]
[tex] \sf{-160 \alpha = 121} [/tex]
[tex] \sf{\alpha = \frac{121}{-160}}[/tex]
[tex] \sf{\alpha = -0.75625 \: rad/s^2 \approx \boxed{-0.76 \: rad/s^2}}[/tex]
t = ... s[tex] \sf{\alpha = \frac{\omega_0 - \omega_t}{t}}[/tex]
[tex] \sf{-0.76 = \frac{0 - 11}{t}}[/tex]
[tex] \sf{-0.76t = -11}[/tex]
[tex] \sf{t = \frac{- 11}{-0.76}}[/tex]
[tex] \boxed{\sf{t \approx 14.474 \: s}}[/tex]
ConclusionSo :
The angular acceleration of the wheel approximately -0.76 rad/s² or proportionally as deceleration approximately 0.76 rad/s.It need approximately 14.474 s to come to rest.Which nucleus completes the following equation?
Answer:
I think that CL IS THE ONLY BEST ANSWER
Explanation:
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE
The power in an electrical current is given by the equation
Answer:
P = VI
Explanation:
the power is equal to the current × voltage
Answer:
P = V • I
Explanation:
Power = Voltage • Current
What is the magnitude of the electric field 3m away from the source if the electric potential is described by the function f(x)=2x+3, where x=2?
Hi there!
Recall the following relationship between the electric field and electrical potential:
[tex]E = -\frac{dV}{dx}[/tex]
Begin by taking the derivative of the electric potential function using basic power and constant rules.
Remember:
[tex]\frac{dy}{dx}x^n = nx^{n - 1}[/tex]
[tex]\frac{dy}{dx}(C) = 0[/tex]
Differentiate the function, and take its negative.
[tex]-\frac{dV}{dx} = -(2(1)(x^{1-1}) + 0 )\\\\-\frac{dV}{dx} = -2[/tex]
The magnitude is the absolute value, so:
[tex]|\frac{dV}{dx} = |-2| = \boxed{2 \frac{V}{m}}[/tex]
I need help with this please
Answer:
i think its 100
Explanation:
A kitten sits in a lightweight basket near the edge
Answer:
So where's the problem now?
A kitten is just sitting
List three methods of energy transport in nature and explain how the energy is being transferred in each of those methods. Which two are means by which energy is transported inside the Sun?
This question is for my college astronomy class!
First normal transportation is the light energy of sun is transmitted to our earth .
Next for transportation inside sun they are
Fusion and fissionFusion means when two hydrogen atoms reacts to form helium nucleus .
Fission means when one nucleus is broken into two or more nucleus
Explanation:
#Make_the smartest_answer
#sorry_if_wrong
#I hope this helps
#follow_and_like_me
#No copas
#Thank_you_for_watching
么•ᴮᴬᴰʙᵒʏツ
ॐhน໓ค • ๓นhค๓๓ค໓ঔৣ
ॐŞiŞ¢ค • วนคriคঔৣ
A garage hoist lifts a truck up 2 m above the ground in 15seconds.Find the power delivered to the truck (given 1000kg as the mass of the truck and gas 9.81m/s
The power delivered to the truck of mass 1000 kg that was lifted by a garage hoist, 2 m high above the ground in 15 seconds is 1308 W.
What is power?
Power can be deifned as the rate at which work is done.
To calculate the power delivered to the truck, we use the formula below.
Formula:
P = mgh/t.............. Equation 1Where:
P = Power delivered to the truckm = Mass of the truckh = Heightg = Acceleration due to gravityt = timeFrom the question,
Given:
m = 1000 kgh = 2 mt = 15 secondsg = 9.81 m/s²Subsitute these values into equation 1
P = (1000×2×9.81)/15P = 19620/15P = 1308 WHence, The power delivered to the truck of mass 1000 kg that was lifted by a garage hoist, 2 m high above the ground in 15 seconds is 1308 W.
Learn more about power here: https://brainly.com/question/1634438
Mrs. Martin is holding a ball from a height of 3.2 m that has the potential energy of 23 J, calculate the mass of the ball.
Answer:
0.73kg
Explanation:
Potential gravitational energy is equal to [tex]Pe=mgh[/tex], where Pe is potential gravitational energy, m is mass in kilograms, g is gravity in m/s^2 and h is height in meters.
Substitute:
[tex]Pe=mgh\\23=m*9.8*3.2\\23=31.36m\\0.73=m[/tex]
[tex]Question: $x_{1}=\frac{5}{2}[\sin (2 \pi t)+\cos (2 \pi t)], x_{2}=5\left[\sin \left(2 \pi t+\frac{\pi}{4}\right)\right]$[/tex]
Find the ratio of the amplitude of the given motion?
Options:
[tex](a) $\sqrt{2}: 1$\\(b) $2: 1$\\(c) $1: \sqrt{2}$\\(d) $1: 2$[/tex]
Condense x₁ to get
sin(2πt) + cos(2πt) = √2 • (sin(2πt) + cos(2πt))/√2
… = √2 (cos(2πt) cos(π/4) + sin(2πt) sin(π/4))
… = √2 cos(2πt - π/4)
So the amplitude of x₁ is (5/2) • √2 = 5/√2, while the amplitude of x₂ is 5. The ratio between them is then 5/√2 : 5, or equivalently 1/√2 : 1 or 1 : √2.
A ball is thrown directly upwards at 25 ms and the same time another ball is released from height of loom. At what height and time will the balls meets?
Answer:
Explanation:
When the balls meets, the time should be the same, let say t.
For the first ball (released from a loom):
[tex]\bar{h}=\frac{1}{2}gt^{2}[/tex] (Free fall motion) ([tex]\bar{h}[/tex] = the distance travelled by the first ball, measured from the loom)
So, we can find that [tex]\bar{h}=\frac{1}{2}(10t^{2})=5t^{2}[/tex]
For the second ball (which is thrown directly upwards):
[tex]y=v_{o}t-\frac{1}{2}gt^{2} = 25t-5t^{2}[/tex]
Because the height of the loom is h :
[tex]h=\bar{h}+y[/tex]
[tex]h=25t[/tex]
So, the time when two balls meets is : [tex]t=\frac{h}{5}[/tex] (In this question, the height of the loom h is not declared). When the height of the loom is known, you can calculate the time and the value of [tex]\bar{h}[/tex] or y
PLEASE HELP, WILL MARK BRAINLIEST!!!!!!!
A mass m is dropped from height h above the top of a spring of constant k mounted vertically on the floor.
Find the spring's maximum compression.
Express your answer in terms of some or all of the variables: m , h , k , and gravitational constant g .
m*g/k (1 + √(1 + 2k*h/m*g))
Is this answer correct and why? Or is it something else?
I think your answer may be wrong.
The mass's potential energy at the start is mgh; this gets converted to kinetic energy as it falls (assuming no air resistance), so that by conservation of energy,
mgh = 1/2 mv² ⇒ v = √(2gh)
where v is the velocity of the mass when it first comes into contact witht he spring.
As the spring is compressed, it performs work on the mass as it slows to a rest at maximum compression. If x is the maximum compression, then the spring does -1/2 kx² of work. (negative since it opposes the downward fall)
By the work-energy theorem (total work is equal to change in kinetic energy),
-1/2 kx² = 0 - 1/2 mv²
Plug in v and solve for x :
kx² = m (√(2gh))²
x² = 2mgh/k
x = √(2mgh/k)
A parachute falling to the ground.
Answer:
a parachute falling to the ground is uniform
What is the momentum of a 35–kilogram cart moving at a speed of 1.2 meters/second
Answer:
42
Explanation:
P = M × V
so
P = 35 × 1.2
P = 42
Answer:
42kg•m/s
Explanation:
p=m*v
What does the term wavelength refer to?
the distance between the equilibrium position and a crest
the distance between the equilibrium position and a trough
the time taken to complete one cycle
the distance between two consecutive crests or troughs
Answer:
the distance between two consecutive crests or troughs
An aquarium heater transfer 1200kJ of the heat to 75000g of water. What is the increase in the waters temperature?
Answer:
Energy = mcΔt
where m the mass , c specific heat capacity
Δt is the change in temperature
1200x10^3=75x4184xΔt
Δt=3.82°
Explanation:
An unknown fluid flows at a speed of 31 m/s. Suppose the fluid has a mass of 47 kg runs at this speed. What is the fluid’s kinetic energy?
Answer:
22583.5J
Explanation:
KE=1/2 mv^2
=1/2*47Kg*(31m/s^2)
=23.5Kg * 961m/s^2
=22583.5J