Determine the number of σ bonds and π bonds in each of the molecules. H 2 C = CCl 2 number of σ bonds: 1 number of π bonds: 1 HOOC − COOH number of σ bonds: 1 number of π bonds: 0 FHC = C = CHF number of σ bonds: number of π bonds: This molecule consists of a four membered carbon ring with two double bonds, one between carbons 1 and 2 and the other between carbons 3 and 4. A hydrogen is attached to each of the four carbons. Number of σ bonds: number of π bonds:

Answers

Answer 1

in H2C=CCl2: σ bonds = 3, π bonds = 1, in HOOC−COOH: π bonds = 0, σ bonds = 14, FHC=C=CHF: σ bonds= 7, π bonds = 2.

H2C=CCl2:

Number of σ bonds: 3 (2 C-H bonds and 1 C-Cl bond)

Number of π bonds: 1 (C=C double bond)

HOOC−COOH:

Number of σ bonds: 14 (8 C-H bonds, 4 C-O bonds, and 2 O-H bonds)

Number of π bonds: 0

FHC=C=CHF:

Number of σ bonds: 7 (4 C-H bonds, 2 C-F bonds, and 1 C-C bond)

Number of π bonds: 2 (2 C=C double bonds in the carbon ring)

In the molecule H2C=CCl2, there are three sigma bonds and one pi bond. The sigma bonds are formed due to the overlap of orbitals between the carbon atoms and hydrogen and chlorine atoms. The pi bond is formed by the sideways overlap of unhybridized p orbitals on the two carbon atoms in the double bond.

In the molecule HOOC−COOH, there are 14 sigma bonds and no pi bonds. The sigma bonds are formed due to the overlap of orbitals between the carbon, hydrogen, and oxygen atoms. This molecule is an example of a carboxylic acid, and the two carboxyl functional groups are connected by a carbon-carbon single bond.

learn more about Sigma bond here:

https://brainly.com/question/30000552

#SPJ4


Related Questions

E
C
A
Making Esters
1. Name the following esters and give the name of the alcohol + carboxylic reacted to make each one.
нн
но
||
Hнн
H-C-ë-o-С-С-Н
II
нн
Н
н н
H-c-c-c
11
нн
H-C - c- c-c
| | |
Hнн
=0
нн
I Т
O
Н
O-C-H
Н
B
нннн
|
|
0 — 0 — c - C - C -H
| | |
НННН
D
H-C-C-
| |
нн
F
Н
H-c-
Н
C
<=0
O
Н
H
нн
НН Н
H-c-c
Кт жи
11
H- C-C — с
11
11
- C — C — C —H
нн
H
| | |
HHH
H
H
|
- C-H
нннн
H
C-C C-C-H
=0
нннн
H-C
ннн
0 - ć - c - C-H
ннн
н н
0-c - C -н
HH

Answers

Answer:

Here are the names of the esters and the corresponding alcohols and carboxylic acids that were used to make them:

1. Ethyl acetate, made from ethanol and acetic acid

2. Methyl propanoate, made from methanol and propanoic acid

3. Butyl butyrate, made from butanol and butyric acid

4. Octyl formate, made from octanol and formic acid

5. Ethyl benzoate, made from ethanol and benzoic acid

6. Ethyl propionate, made from ethanol and propanoic acid

7. Methyl butyrate, made from methanol and butyric acid

8. Ethyl butyrate, made from ethanol and butyric acid

9. Propyl formate, made from propanol and formic acid

10. Butyl propionate, made from butanol and propanoic acid.

If you had 9. 65 x 1026 atoms of Ag, how many moles would you have?

Answers

If you had [tex]9.65 * 10^{26[/tex] atoms of Ag, you would have [tex]1.603 * 10^3[/tex] moles of Ag.

To find the number of moles of Ag atoms you have, you need to use Avogadro's number, which is 6.022 x 10^23. This number represents the number of atoms in one mole of any substance.
To find the number of moles, you need to divide the number of atoms you have by Avogadro's number:
Number of moles = Number of atoms / Avogadro's number
Plug in the given values:
Number of moles = 9.65 x 10^26 atoms / 6.022 x 10^23 atoms/mole
Simplify:
Number of moles = 1.603 x 10^3 moles
So, if you had 9.65 x 10^26 atoms of Ag, you would have 1.603 x 10^3 moles of Ag.


For more question on Avogadro's number click on

https://brainly.com/question/12049381

#SPJ11

504 grams C6H12= ____ moles C6H12

Answers

The formula for 504 grammes of C6H12 is 5.988630157885872 moles of C6H12, and the given molecule is C6H12 C 6 H 12. Twelve hydrogen atoms and six carbon atoms this molecule. The solution is therefore 84g/mol.

How does g become mol?

To precisely determine its molarity, n, of a material with such a mass m, m (in grammes), use the grammes into moles formula. M represents the substance's molar mass, and n = m / M.

What is 1 metre in moles?

The amount of moles per litre, denoted by the unit sign mol/L and mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.

To know more about atoms visit:

https://brainly.com/question/30898688

#SPJ1

PLEASE HELPPPP
How many grams of HCl will make a solution with 100g of water saturated at 60 degrees C?
(please be quick!!!!)
110g HCl


55g of HCl


27.5g of HCl

Answers

If you want a solution that is less than saturated, the amount of HCl needed is less - in this case, 27.5g.

What is saturated?

Saturated refers to a state of being filled to capacity or having reached its maximum level. In chemistry, it is used to describe a molecule or compound that has all its available bonds filled with either single or multiple bonds. It is a state of maximum solubility, meaning that no more of a substance can dissolve in a given solvent. In physical science, it can also refer to the highest temperature where a substance can exist in the liquid state without boiling.

The amount of HCl required to make a solution with 100g of water saturated at 60 degrees C depends on the concentration of the HCl solution you are trying to make. If you want to make a saturated solution, the maximum amount of HCl that can be dissolved in 100g of water at 60 degrees C is 55g. If you want a solution that is less than saturated, the amount of HCl needed is less - in this case, 27.5g.

To learn more about saturated
https://brainly.com/question/388072
#SPJ1

What is the ground-state electron configuration of O^-2 ?

Answers

The ground-state electron configuration of [tex]O^{2-}[/tex] is [He]2s²[tex]2p^{6}[/tex].[tex]2p^{6}[/tex]

What is the ground-state electron configuration?

The ground state is the state in which an atom is in its lowest energy state. The ground-state electron configuration of [tex]O^{2-}[/tex] is [He]2s²[tex]2p^{6}[/tex].

Oxygen anion, also known as oxide anion, is formed when oxygen gains two electrons to attain a negative charge. The electronic configuration of oxygen before gaining the two electrons is 1s²2s²[tex]2p^{4}[/tex].

When two electrons are added to oxygen, the resulting configuration becomes 1s²2s²[tex]2p^{6}[/tex]. However, to achieve a filled valence shell, the oxide ion has two additional electrons, resulting in a configuration of [He]2s²[tex]2p^{6}[/tex].

To know more about electron configuration:

https://brainly.com/question/29357642

#SPJ11

Based on the clues in the messages between Mateo in Quito and Fernanda in Philadelphia, what type of event do you think will occur in Quito, Ecuador? Use evidence from the conversation to explain your answer.

Answers

While the circular portion of this solar eclipse is not visible in Quito, a partial solar eclipse can be seen there.

What happens after a partial solar eclipse?

A partial eclipse happens when the Sun and Moon are only partly blocked from Earth's view by the Moon. Typically, a sizable portion of the planet's surface outside of an annular or complete eclipse can observe this occurrence.

However, because the umbra travels above the polar areas of the Earth and never touches the Earth's surface, some eclipses can only be seen as partial eclipses. Since it requires well over 90% coverage to observe any dimming of the Sun's brightness, partial eclipses are essentially undetectable. It wouldn't be any dimmer than civil dusk even at 99%.

Learn more about eclipse

https://brainly.com/question/4279342

#SPJ1

Every fraction from crude oil contains hydrocarbons with a similar number of carbon and _______ atoms. What one word completes the sentence

Answers

Every fraction from crude oil contains hydrocarbons with a similar number of carbon and hydrogen atoms.

Hydrocarbons are organic compounds that are composed of hydrogen and carbon atoms. The number of carbon atoms in a hydrocarbon molecule determines its physical and chemical properties, such as its boiling point, density, and viscosity. The hydrocarbons found in crude oil can be separated into different fractions through a process called fractional distillation, which separates them based on their boiling points.

Each fraction typically contains hydrocarbons with similar carbon chain lengths, which can range from a few carbon atoms to over 50 carbon atoms.

For such more questions on Crude oil

https://brainly.com/question/11926758

#SPJ4

how many moles of water vapour are formed when 10 litres of butane gas, C4H10 is burned in oxygen at STP?​

Answers

Answer and Explanation: 1 mole of a gas, at STP, occupies a volume of 22.4L. Hence, 10L will contain 10L / 22.4mol/L = 0.446mol of gas.

A 100.0 g Chunk of Aluminum with an Initial Temperature of 450.0 C° is added to 100.0
mL of Ethyl Alcohol with an Initial Temperature of 80.0 C° (A) Calculate Equilibrium
Temperature of the Mixture (B) Calculate the Heat Exchange of the System
A) 150 C° B) 30000 J All answers Approx B
A) 300 C° B) 15000 J All answers Approx
D
A) 198 C° B) 22770 J All answers Approx
all silbeg
A) 110C° B) 10000 J All answers Approx

Answers

The correct answer is (D) A) 198°C B) 22770 J. Equilibrium can be achieved in reversible reactions, where the reactants can form products and vice versa.

What is Equilibrium?

Equilibrium is a state of balance or stability in a system. In thermodynamics, it refers to a state in which the temperature, pressure, and concentration of the components of a system do not change with time. At equilibrium, the forward and reverse reactions occur at equal rates, and the system does not undergo any net change.

To solve this problem, we can use the principle of conservation of energy, which states that the total energy of a closed system is conserved, meaning that energy cannot be created or destroyed, only transferred from one form to another.

We can start by using the formula for heat exchange:

Q = mcΔT

where Q is the heat exchange, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

For the aluminum chunk, we have:

Q_aluminum = (100.0 g) x (0.903 J/g°C) x (450.0°C - T_eq)

For the ethyl alcohol, we have:

Q_ethanol = (100.0 g) x (2.44 J/g°C) x (T_eq - 80.0°C)

At equilibrium, the heat exchange of the system is zero, so we can set Q_aluminum = -Q_ethanol and solve for T_eq:

(100.0 g) x (0.903 J/g°C) x (450.0°C - T_eq) = -(100.0 g) x (2.44 J/g°C) x (T_eq - 80.0°C)

Solving for T_eq, we get:

T_eq = 198.4°C (rounded to one decimal place)

This is the equilibrium temperature of the mixture.

Q_aluminum = (100.0 g) x (0.903 J/g°C) x (450.0°C - 198.4°C) = 22770 J (rounded to the nearest 10 J)

Q_ethanol = (100.0 g) x (2.44 J/g°C) x (198.4°C - 80.0°C) = 22770 J (rounded to the nearest 10 J)

So the total heat exchange of the system is:

Q_total = Q_aluminum + Q_ethanol = 2 x 22770 J = 45540 J (rounded to the nearest 10 J)

Learn more about Equilibrium from the given link

https://brainly.com/question/517289

#SPJ1

What happens to copper during this redox reaction? Select all that apply.
Cu2+(aq) + Fe(s) → Cu(s) + Fe2+(aq)


Copper has gained 2 electrons.

Copper experienced an increase in oxidation state.

Copper has been oxidized.

Copper has been reduced.

Answers

Answer:

Copper has gained 2 electrons

Copper has been reduced

Explanation:

The oxidation state of Cu goes from 2+ to 0, meaning it gains 2 electrons (they each have -1 charge);

This is known as reduction

Pneumonic OILRIG:

Oxidation is Loss, Reduction is Gain

Oxidation is the loss of electrons

Reduction is the gain of electrons

Cu2+ gains 2 electrons, thus it is reduced

g if 39.99g naoh in 1 l of water is a 1 m solution what would the molarity be if 39.99g naoh was dissolved in 0.2 l water

Answers

The molarity of NaOH when 39.99 g NaOH was dissolved in 0.2 L of water is 5 M.

Molarity is a measure of the concentration of a solute in a solution, defined as the number of moles of the solute per liter of the solution. A mole is the amount of a substance that contains the same number of entities as there are atoms in 12 grams of carbon-12.

For example, if you dissolve one mole of a solute in one liter of a solution, you have a one-molar solution (1 M).

The formula for molarity is, Molarity (M) = Moles of solute / Volume of solution (in liters)

The number of moles of NaOH in 1 L of water is calculated as follows:

Weight of NaOH = 39.99 g

The molar mass of NaOH = 39.99 g/mol (As said that 39.99 g of NaOH makes 1 molar solution)

The number of moles of NaOH = weight / molar mass = 39.99/39.99 = 1 mol

Molarity = the number of moles/volume of solution in liters

Molarity = 1mol / 1 L = 1 M

If 39.99 g of NaOH is dissolved in 0.2 L of water, we can calculate the molarity as follows:

Weight of NaOH = 39.99 g

The molar mass of NaOH = 39.99 g/mol

The number of moles of NaOH = weight / molar mass = 39.99/39.99 = 1.0 mol

Molarity = the number of moles/volume of solution in liters

Molarity = 1 mol / 0.2 L = 5 M

Therefore, the molarity of NaOH is 5 M.

To know more about molarity, refer here:

https://brainly.com/question/8732513#

#SPJ11

A beam of light distinguishes a colloid from a solution. The particles in a colloid will scatter light, making the beam..........
-visible
-invisible
-no change
-unseeable

Answers

COLLOID

[tex] \mathbb{ANSWER:}[/tex]

A beam of light distinguishes a colloid from a solution. The particles in a colloid will scatter light, making the beam visible.

Also, the scattering of light in a colloid is called a Tyndall Effect.This is one way to identify if a mixture is a colloid or not.
Answer:

The particles in a colloid will scatter light, making the beam visible.

Explanation:

When a beam of light is passed through a colloid, the particles present in the colloid scatter the light in all directions. This is called the Tyndall effect, and it makes the beam of light visible as it passes through the colloid. In contrast, when a beam of light is passed through a solution, the particles present in the solution are too small to scatter the light and therefore, the beam of light passes through the solution without any visible scattering. Hence, the Tyndall effect can be used to distinguish between a colloid and a solution.

Can someone please help with this chemistry question

Answers

The molar mass of barium phosphate to calculate the mass of barium phosphate produced is 48.26 g of Ba₃(PO₄)₂.

What is molar mass?

Molar mass is a term used in chemistry to refer to the mass of a single molecule of a substance. It is calculated by multiplying the atomic mass of each element in the molecule by the number of atoms in the molecule and then adding up the results.

Balancing the equation:
Ba + 3Cu + 4PO₄ -> Ba₃(PO₄)₂ + 3Cu
Since 5.84 g of barium is given, we can use the mole ratio between barium and barium phosphate to calculate the number of moles of barium phosphate produced.
Molar mass of barium = 137.33 g/mol
Molar mass of barium phosphate = 377.3 g/mol
5.84 g of barium = 5.84 g / 137.33 g/mol = 0.0427 mol of barium
Using the mole ratio of 1 mol Ba : 3 mol Ba₃(PO₄)₂, we can calculate the amount of barium phosphate produced:
0.0427 mol of Ba * (3 mol Ba₃(PO₄)₂ / 1 mol Ba) = 0.1281 mol of Ba₃(PO₄)₂
Finally, we can use the molar mass of barium phosphate to calculate the mass of barium phosphate produced:
0.1281 mol of Ba₃(PO₄)₂ * 377.3 g/mol = 48.26 g of Ba₃(PO₄)₂.

To learn more about molar mass
https://brainly.com/question/837939
#SPJ1

How many grams are present in 1. 75 moles of carbon dioxide, CO2?

Answers

Answer:77.00 grams CO2

Explanation:

1.75 oles/1 mole  x 44 grams CO2= 77

(44 comes from the mass of 1 carbon and 2 oxygen)

Calculate the oxidation number of the elements
LiAlH4
K2CO3
KMnO4
K2SO4

Answers

LiAlH₄ contains H with an oxidation number of -1, K₂CO₃ and KMnO₄ contain O with oxidation numbers of -2 and -2, respectively, while Li contains +1, Al contains +3, K contains +1, C contains +4, S contains +6, and Mn contains +7 and K₂SO₄ also has O with oxidation number of -2

The oxidation number of an element is a measure of the number of electrons that an atom has gained or lost when it forms a chemical bond. To calculate the oxidation number of the elements in the following compounds, we follow the following rules:

The oxidation number of an element in its elemental state is always zero.

The sum of oxidation numbers of all atoms in a compound is equal to the charge on the compound.

The oxidation number of hydrogen is usually +1, except when it is combined with a metal, in which case it is -1.

The oxidation number of oxygen is usually -2, except when it is combined with a peroxide, in which case it is -1, or with fluorine, in which case it is +2.

Using these rules, we can calculate the oxidation numbers of the elements in the following compounds:

LiAlH₄:

The oxidation number of Li is +1.

The oxidation number of Al is +3.

The oxidation number of H is -1.

Therefore, the oxidation number of H in LiAlH₄ is -1.

K₂CO₃:

The oxidation number of K is +1.

The oxidation number of C is +4.

The oxidation number of O is -2.

Therefore, the oxidation number of O in K₂CO₃is -2.

KMnO₄ :

The oxidation number of K is +1.

The oxidation number of Mn is +7.

The oxidation number of O is -2.

Therefore, the oxidation number of O in KMnO₄  is -2.

K₂SO₄:

The oxidation number of K is +1.

The oxidation number of S is +6.

The oxidation number of O is -2.

Therefore, the oxidation number of O in K₂SO₄ is -2.

In summary, LiAlH₄ has H with oxidation number of -1, K₂CO₃ and KMnO₄ have O with oxidation number of -2, and K₂SO₄also has O with oxidation number of -2, while Li has +1, Al has +3, K has +1, C has +4, S has +6, and Mn has +7.

To learn more about oxidation number refer to:

brainly.com/question/29257381

#SPJ4

BRO LITERALLY PLEASE HELP!!!!

A solution consists of 40. 00 g of CuSO4 dissolved in 200. 0 mL of water. The molar mass of Cu is 63. 55 g/mol, the molar mass of S is 32. 07 g/ml, and the molar mass of S is 16. 00 g/mol. What is the molarity of the solution?Show your work

Answers

The molarity of the solution is 1.253 M.  To find the molarity of the solution, we first need to calculate the number of moles of CuSO4 in the solution.

The molar mass of CuSO4 is

63.55 + 32.07  + (4 x 16.00 ) g/mol  = 159.62 g/mol.

Next, we can use the equation moles = mass / molar mass to find the number of moles of CuSO4 in the solution.  

Moles of CuSO4 = 40.00 g / 159.62 g/mol = 0.2506 mol

Finally, we can use the equation molarity = moles / volume to find the molarity of the solution.

The volume of the solution is 200.0 mL, or 0.2000 L.

Molarity = 0.2506 mol / 0.2000 L = 1.253 M

Therefore, the molarity of the solution is 1.253 M.

For more question on molarity click on

https://brainly.com/question/30404105

#SPJ11

Consider the reaction 2NH3 (g) #!!!"! N2 (g) + 3H2 (g)

at a temperature where K = 3. 0 x 10-8. In an experiment, 1. 0 x 10-3 mol NH3, 1. 0 x 10-1

mol H2, and 1. 0 mol N2 are mixed in a 5. 0 L vessel

Answers

NH₃, N₂, and H₂ are present in concentrations of 0.00144 mol/L, 6.75 x [tex]10^{-13}[/tex] mol/L, and 5.08 x [tex]10^{-2}[/tex] mol/L, correspondingly.

To determine whether the reaction will proceed in the forward or reverse direction, we can calculate the reaction quotient, Q, which is defined as the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients.

Q = [N₂] [H₂]³ / [NH₂]²

Plugging in the given concentrations, we get:

Q = (1.0 mol/L)² (1.0 x [tex]10^{-1}[/tex] mol/L)³ / (1.0 x [tex]10^{-3}[/tex] mol/L)²

= 1.0 x [tex]10^{13}[/tex]

Comparing Q to the equilibrium constant K, we see that Q is much larger than K, which means that the reaction will proceed in the reverse direction to reach equilibrium. In other words, some of the N₂ and H₂ will react to form more NH₂ until Q equals K.

To determine the equilibrium concentrations of NH₃, N₂, and H₂, we can use the equilibrium constant expression:

K = [N2] [H2]³ / [NH3]²

Rearranging and solving for [NH₃], we get:

[NH₃]² = [N₂] [H₂]³ / K

[NH₃] = √([N₂] [H₂]³ / K)

Plugging in the given concentrations and K, we get:

[NH₃] = 0.00144 mol/L

Similarly, we can find the equilibrium concentrations of N₂ and H₂:

[N₂] = K [NH₃]² / [H₂]³

= (3.0 x [tex]10^{-8}[/tex]) (0.00144 mol/L)² / (1.0 x [tex]10^{-1}[/tex]mol/L)³

= 6.75 x [tex]10^{-13}[/tex] mol/L

[H₂] = K [NH₃]² / [N₂]

= (3.0 x [tex]10^{-8}[/tex]) (0.00144 mol/L)² / (6.75 x [tex]10^{-13}[/tex] mol/L)³

= 5.08 x [tex]10^{-2}[/tex] mol/L

Therefore, at equilibrium, the concentrations of NH₃, N₂, and H₂ are 0.00144 mol/L, 6.75 x [tex]10^{-13}[/tex]mol/L, and 5.08 x [tex]10^{-2}[/tex] mol/L, respectively.

To learn more about concentrations refer to:

brainly.com/question/13872928

#SPJ4

o earn full credit for your answers, you must show the appropriate formula, the correct substitutions , and your answer including the correct units.

This year Bikini Bottom has a starfish population of 1012. There are 182 starfish born and 166 starfish deaths this year. Then 141 starfish leave and move from Bikini Bottom to Jellyfish Fields. There was also a natural disaster in Lava Flow Bend and caused 203 starfish to relocate to Bikini Bottom. Calculate the percent population growth rate for the starfish in Bikini Bottom.

Answers

Answer:

clarify

Explanation:

Fog is an example of colloid that has the phase of..........
-liquid dispersed in gas
-liquid dispersed in liquid
-liquid dispersed in solid
-solid dispersed in solid

Answers

Answer:

solid dispersed in gas

Fog is a type of colloid in which tiny droplets of liquid, such as water, are suspended in a gas, such as air. Fog can be considered a liquid-in-gas colloid since the dispersed-phase droplets are composed of liquid, and the continuous-phase is composed of gas.

Other examples of colloids include smoke (solid particles dispersed within a gas), whipped cream (gas in a liquid), mayonnaise (liquid in a liquid), gelatin (solid in a liquid), and clouds (liquid in a gas).

Fog can be categorized according to the type of gas which is the continuous phase. For instance, water-in-air fog is the most common type, while smoke of air constitutes a solid-in-air colloid. Other types of fog include oil-in-air (liquid-in-gas colloid) and dust-in-air (solid-in-gas colloid).

Colloids form when particles of the dispersed phase are typically larger than 1 nanometer, yet small enough to remain suspended in the continuous phase due to Brownian motion or other forces. The particles remain suspended due to the attraction of the particles for each other (Induced Charge Electrophoresis) and for the carrier phase molecules.

Understanding colloids is important for a variety of applications, such as drug delivery, material engineering, food science, and wastewater treatment

Fog is an example of a colloid that has the phase of "liquid dispersed in gas."

When air becomes saturated with water vapour and condenses into minute water droplets close to the Earth's surface, fog is a natural meteorological occurrence.

Fog is a foggy mist formed when little liquid water droplets are scattered across the atmosphere.

A colloidal system is produced when liquid water droplets are suspended in the gas phase (air).

Thus, because these droplets are so tiny, they can hang suspended in the air for a long time, giving fog its distinctive appearance.

For more details regarding fog, visit:

https://brainly.com/question/30970077

#SPJ6

Can someone please help with this chemistry question

Answers

1 mole of sodium (Na) atoms has a mass of 22.99 g. Therefore, 15 g of sodium contains 6.67e23 atoms of sodium.

What is atom?

Atom is the smallest and most basic unit of matter. It consists of a nucleus, made of protons and neutrons, surrounded by electrons in a cloud-like structure. Atoms are the building blocks of all matter and are the basis for the development of chemistry and other sciences. Atoms can form chemical bonds with other atoms, resulting in molecules and compounds. Atoms are extremely small, and it takes an electron microscope to observe them. They are also incredibly light, with an average atom weighing only one-trillionth of a gram.

To learn more about atom
https://brainly.com/question/14644957
#SPJ1

molten iron and carbon monoxide are produced in a blast furnace by the reaction of iron(iii) oxide and coke (pure carbon). if 25.0 grams of pure fe2o3 are used, how many atoms of iron can be produced?

Answers

Molten iron and carbon monoxide are produced in a blast furnace by the reaction of iron(III) oxide (Fe2O3) and coke (pure carbon).

If 25.0 g of Fe2O3 are used, the number of atoms of iron that can be produced is determined using the balanced equation:

Fe2O3 + 3C → 2Fe + 3CO

Using the mole ratio from the equation, we know that for every 1 mole of Fe2O3 that is used, 2 moles of iron are produced.

We can then convert the 25.0 g of Fe2O3 to moles by using the molar mass of Fe2O3 (159.69 g/mol):

25.0 g Fe2O3 × (1 mol Fe2O3/ 159.69 g Fe2O3) = 0.1566 mol Fe2O3

And using the mole ratio, we can calculate the moles of iron produced:

0.1566 mol Fe2O3 × (2 mol Fe/ 1 mol Fe2O3) = 0.3132 mol Fe

Finally, we can convert the moles of iron produced to atoms of iron by using Avogadro's number (6.022 x 1023 atoms/mol):

0.3132 mol Fe × (6.022 x 1023 atoms Fe/ 1 mol Fe) = 1.878 x 1023 atoms Fe

Therefore, if 25.0 g of pure Fe2O3 are used, 1.878 x 1023 atoms of iron can be produced.

for more questions related to atoms, refer here:

https://brainly.com/question/29695801

#SPJ11

Calculate the number of ml of 2. 00 m hno3 solution required to react with 216 grams of ag according to the equation

Answers

Calculate the number of mL of 2.00 M HNO3 solution required to react with 216 of Ag. Solution. Ag + 2HNO3 = AgNO3 + NO2 + H2O N (HNO3) = 4 moles V (HNO3) = 4/2 = 2 L = 2000 mL Answer.

Even though cities may be located at approfimately the same latitude, why might the

climate in each city be different? Mark all the answers that apply

A. Some cities may be located at different altitude

B. The type of people who live there

C. Warm ocean currents bring warmer temperatures to coastal cities

D. Mountain ranges create the rain shadow effect


Answers

Answer:

A. Some cities may be located at different altitude

C. Warm ocean currents bring warmer temperatures to coastal cities

D. Mountain ranges create the rain shadow effect

Explanation:

The climate in cities can differ due to several factors, including altitude, proximity to oceans or mountains, prevailing winds, and other geographical features. Thus, options A, C, and D are all correct. The type of people who live in a city, as stated in option B, is not a significant factor in determining climate.

How the abiotic factors impacted the biotic factors in Chernobyl??
URGENT!!

Answers

Answer:

The Chernobyl disaster of 1986 was a nuclear accident that had a significant impact on the environment and the living organisms in the surrounding area. The abiotic factors, including radiation and temperature changes, had a profound impact on the biotic factors, including plants and animals.

Radiation: One of the primary abiotic factors that impacted the biotic factors in Chernobyl was radiation. The explosion at the nuclear reactor released large amounts of radioactive material into the environment, which had a devastating impact on the plants and animals in the area. Many of the trees and plants in the surrounding forests died, and the animals that ate these plants were also affected. The radiation also caused genetic mutations in many of the organisms in the area.

Soil: The soil in the area was also impacted by the radiation, which caused changes in the nutrient levels and pH levels. This made it more difficult for plants to grow and survive in the area, and it also impacted the animals that depended on these plants for food.

Temperature: The temperature in the area was also impacted by the radiation, which caused changes in the weather patterns. The increased levels of radiation also caused higher temperatures in the area, which made it more difficult for plants and animals to survive.

Overall, the abiotic factors, including radiation, soil, and temperature changes, had a significant impact on the biotic factors in Chernobyl. Many of the plants and animals in the area were negatively impacted, and the ecosystem in the surrounding area was altered in ways that are still being studied today.

How many moles are in 8. 11 X 10 20 molecules of CH4?

Answers

Answer: 0.00135

Explanation:

The Avogadro's number is the number of particles (atoms, molecules, or ions) in one mole of a substance and is equal to 6.02 x 10^23. We can use this value to convert the number of molecules of CH4 into moles.

Number of molecules of CH4 = 8.11 x 10^20

Number of moles of CH4 = (8.11 x 10^20) / (6.02 x 10^23)

Number of moles of CH4 = 0.00135 moles of CH4 (rounded to five significant figures)

Therefore, there are approximately 0.00135 moles of CH4 in 8.11 x 10^20 molecules of CH4.

What two properties are used to identify clouds?​

Answers

The two properties are used to identify clouds are atmospheric height and how they look like.

Explain about the clouds and its formations?

Often, factors like a cloud's height in the skies, texture, and the kind of "weather" it produces or doesn't generate are used to classify and identify it.

Cirrus clouds have a delicate, wispy appearance that frequently resembles "hair." They are usually white in hue and contain ice crystals which occasionally give the sky unusual colors.

The others are more thicker and appear more gray, altocumulus clouds typically have a more white and patchy appearance. With Nimbostratus as an exception, which is generally seen as being more "low-level" due to its falling base.

The lowest, most diversely characterized clouds in the sky. These clouds can extend quite far into the troposphere vertically and are likewise made of water droplets.

Thus, the two properties are used to identify clouds are atmospheric height and how they look like.

Know more about clouds and its formations

https://brainly.com/question/2941398

#SPJ1

write the detailed stepwise mechanism for the reaction of pinacolone with piperonaldehyde in the presence of potassium hydroxide.

Answers

The mechanism of the reaction have been described in detail in the answer that is below.

What is the step wise mechanism?

The reaction of pinacolone with piperonaldehyde in the presence of potassium hydroxide is a type of crossed aldol condensation reaction. Here is the stepwise mechanism:

Step 1: Deprotonation of piperonaldehyde

In the presence of potassium hydroxide, piperonaldehyde undergoes deprotonation to form the enolate ion of piperonaldehyde.

Step 2: Nucleophilic addition of piperonaldehyde enolate to pinacolone

The piperonaldehyde enolate acts as a nucleophile and attacks the carbonyl carbon of pinacolone, resulting in the formation of an intermediate compound.

Step 3: Proton transfer

In this step, a proton is transferred from the hydroxyl group of the intermediate compound to the adjacent carbon atom, leading to the formation of an enol intermediate.

Step 4: Tautomerization of the enol intermediate

The enol intermediate undergoes tautomerization to form a more stable keto form.

Step 5: Rearrangement and elimination

The keto form undergoes a rearrangement in which a hydrogen atom is transferred from the adjacent carbon to the carbonyl carbon, forming a β-hydroxyketone intermediate. This intermediate then undergoes elimination of a water molecule, forming a double bond and resulting in the formation of the final product.

Learn more about piperonaldehyde :https://brainly.com/question/29871297

#SPJ1

According to the following equation, calculate the percent yield if 550.0g of toluene is added to an excess of nitric acid and provides 305g of the p-nitrotoluene product in the lad experiment.

C7H8+HNO3-->C7H7NO2+H2O

Answers

The percent yield of the reaction is 37.2%. The theoretical yield, or maximum amount of product that can be produced based on the amount of limiting reagent utilized in the reaction, must first be ascertained in order to calculate the percent yield.

What use does the percent yield serve?

In chemistry, the percentage yield is used to compare the actual outcome of a reaction to the maximum outcome anticipated.

Why is yield rate crucial?

Several institutions place a high value on yield because past yield data enables them to forecast the number of students they will need to accept to order to reach their enrollment goal. Fewer pupils may be admitted if the school's yield rates historically have been high.

We can use stoichiometry to calculate the theoretical yield of p-nitro-toluene:

1 mole of toluene produces 1 mole of p-nitro-toluene

The molar mass of toluene is 92.14 g/mol, and the molar mass of p-nitro-toluene is 137.14 g/mol.

550.0 g of toluene is equivalent to 5.97 moles (550.0 g / 92.14 g/mol).

Therefore, the theoretical yield of p-nitro-toluene is:

5.97 moles of p-nitro-toluene = 5.97 moles of toluene

5.97 moles of p-nitro-toluene x 137.14 g/mol = 819.9 g

we can calculate the percent yield:

Percent yield = (actual yield / theoretical yield) x 100%

In the given experiment, the actual yield of p-nitro-toluene is 305 g.

Percent yield = (305 g / 819.9 g) x 100% = 37.2%

To know more about the percent yield visit:

https://brainly.com/question/19734683

#SPJ1

What type of proteins are formed by amino acids?

Polymeric proteins

Small proteins

Large proteins

Regular proteins

Answers

amino acids form polymeric proteins, which are made up of many amino acid monomers linked together by peptide bonds.

Proteins are made up of amino acids, which are linked together by peptide bonds to form long chains known as polypeptides. Polypeptide chains can fold and interact with one another to form complex three-dimensional structures known as proteins.

Proteins range in size from small proteins made up of only a few amino acids to large proteins made up of thousands of amino acids. Protein regularity varies as well, with some proteins having highly repetitive sequences and others having more irregular structures.

learn more about amino acids here:

https://brainly.com/question/14351754

#SPJ4

20. Based on the concept of periodic trends, answer the following questions for these atoms: Au, Zn,
S, Si. Be able to defend your answers.
a. Which element has the highest electronegativity?
b. Which element has the most metallic character?
C. Which element has the largest atom?

Answers

The element with lowest electronegativity, based on periodic trends, is Li. An atom's electronegativity is measured.

How would you describe recurring patterns?

Atomic radius, ionisation energy, electron attraction, electronegativity, valency, and metallic nature are important periodic trends. Due to the periodic nature of the elements and their similar electrical configurations within their various groups or periods, these tendencies are present.

What contributes to recurring trends?

The number of protons on the nucleus, the number of energetic levels, & the shielding effect are three variables that aid in the prediction of trends in the periodic table. In any group, the atomic radii get larger from top to bottom.

To know more about periodic trends visit:

https://brainly.com/question/12074167

#SPJ1

Other Questions
70 POINTSS)NEED FAST ANSWERS)A square with a side length of 42 meters was created from a square with a side length of 3.5 meters using a scale factor. What is the scale factor? 12:1 24:1 144:1 147:1 Which ideology supports directs rule of state by one powerful leader? you have been asked to examine a bioarchaeological assemblage. you have identified the bones and made the following list of the material: 1 left femur with unfused epiphyses 1 right femur with fused epiphyses 2 adult sacrums 1 cranium with extensive tooth wear 1 mandible with some teeth erupted and others unerupted what is the minimum number of individuals for this assemblage? 125 135 130 140 135 154 135 130 describe the center and variabiliy of these prices 5x-12 3x-4 solve it and gimme the response How are chromosomes distributed in sex cells? Tammy is writing to her principal to explain why she believes the school should offer a womens softball team. Which sentence is a good reason to include in her letter to the principal? A. A softball team would include a coach and eight players. B. There are many teams for male students but only two for female students. C. Softball is a sport that dates as far back as the 1920s. D. Baseball is similar to softball, but the pitches are thrown underhanded. Work is done only when..... _ causes an object to _ in comparing two different regression models that were developed using the same data, we might say that the model with the higher r 2 value will provide the most accurate prediction. is this true? why or why not? John ordered 330 units of a product for $495 then he reduced his order to 270 units how much money does John have to pay for is 270 units PLEASE ANSWER THIS CORRECTLY Part 1: Conflict Poster Complete the following poster based on your short story or novel.Enter title and author of your short story of novel here.Enter the type of conflict here (character vs).Describe Twenty-One Balloons by William Pene du Bois antagonist and their/its goal.Describe Twenty-One Balloons by William Pene du Bois protagonist and their goal.Part 2: Conflict Timeline Complete the following timeline based on your short story or novel.How does the conflict begin in your short story or novel? Describe its beginnings and add textual evidence with a page number from your text.How does the conflict continue in your short story or novel? Describe an event and add textual evidence with a page number from your text.How does the conflict continue in your short story or novel? Describe an event and add textual evidence with a page number from your text.Part 3: Perspective Paragraph Using your selected short story or novel, write a paragraph that includes the following:Twenty-One Balloons by William Pene du Bois Start with a topic sentence that provides the title of your text, the author of your text, and a brief description of the plot so far. Write a sentence that identifies and describes the main conflict. Write two sentences that explain the protagonists perspective about the main conflict. Include a quote and page number from your selected text that supports the protagonists perspective. Write two sentences that explain the antagonists perspective about the main conflict. Include a quote and page number from your selected text that supports the antagonists perspective. Write a concluding sentence that sums up the opinions of the protagonist and antagonist. Do not include your personal opinion. Cite a line that shows how is one conflict resolved by the end of New Kid? the answer to this question.. 3 12. DIG DEEPER There are 4 cups of iced tea. Is it possible for you and your friend to share the tea equally? If so, how much do you each get? If not, explain why not. 5 MTR Use Another Concept How can equivalent fractions help you solve? C Which sunflower field has plants withmore consistent heights? Explain.Please help Use the work energy theorem to rank the final kinetic energy of a ball based on the initial kinetic energy Ki, the magnitude of a constant force F on the ball, the displacement of the ball, d and the angle, theta between the displacement of the ball and the net force on the ball. Rank from greatest kinetic energy (1) to least kinetic energy (4).1. ki= 150 J, F= 10 N, d=15 m, theta= 90 degrees2. Ki= 300 J, F= 200 N, d= 1.5 m, theta= 180 degrees3. ki= 200 J, F= 25 N, d= 4 m, theta= 0 degreee4. ki= 450 J, F= 15 N, d= 30 m, theta= 150 degrees4. in its first month of operations, literacy for the illiterate opened a new bookstore and bought merchandise in the following order: (1) 300 units at $7 on january 1, (2) 450 units at $8 on january 8, and (3) 750 units at $9 on january 29. assume 900 units are on hand at the end of the month. calculate the cost of goods available for sale, cost of goods sold, and ending inventory under the lifo. assume perpetual inventory patents filed with the u.s. patent office: multiple choice are not disclosed to the public. are the property of the u.s. government. frequently suggest other new products. are only accessible to government agencies. How can you file a report with OSHA?Select all that apply.33OnlineIn personBy fax or mailAfter a phone conversation Until recently, the classification of "moderate" would have applied to a. most Americans. b. few Americans. c. most Democrats. d. few Democrats.