Answer:
Crystalline solids have well-defined edges and faces, diffract x-rays, and tend to have sharp melting points. In contrast, amorphous solids have irregular or curved surfaces, do not give well-resolved x-ray diffraction patterns, and melt over a wide range of temperatures.
Explanation:
Hope this helped!
Answer:
Crystalline solids have well-defined edges and faces, diffract x-rays, and tend to have sharp melting points. In contrast, amorphous solids have irregular or curved surfaces, do not give well-resolved x-ray diffraction patterns, and melt over a wide range of temperatures.
Explanation:
A 13.8 g of zinc is heated to 98.8 c in boiling water and then dropped onto a beaker containing 45.0 g of water at 25.o °C .when the water and metal come to thermal equilibrium the temperature is 27.1°C .what is the specific heat capacity
Answer:
[tex]C_{zinc}=0.400\frac{J}{g\°C}[/tex]
Explanation:
Hello!
In this case, by considering thermodynamics and the temperature of zinc, we can infer it is hot while water is cold, it means that the heat lost by the zinc is gained by the water and we can write:
[tex]Q_{Zn}=-Q_{water}[/tex]
In terms of mass, specific heat and temperatures we can write:
[tex]m_{Zn}C_{Zn}(T_{eq}-T_{Zn})=-m_{water}C_{water}(T_{eq}-T_{water})[/tex]
In such a way, by solving for the specific heat capacity of the zinc we write:
[tex]C_{zinc}=\frac{-m_{water}C_{water}(T_{eq}-T_{water})}{m_{Zn}(T_{eq}-T_{Zn})}[/tex]
Thus, by plugging in the given values we obtain:
[tex]C_{zinc}=\frac{-45.0g*4.184\frac{J}{g\°C}* (27.1\°C-98.8\°C)}{13.8g*(27.1\°C-98.8\°C)}\\\\C_{zinc}=0.400\frac{J}{g\°C}[/tex]
Best regards!
how many atoms does sodium hypochlorite have?
Answer:
NaClO; the contained elements ae Na, Cl, O.
Given the following balanced equation, determine the rate of reaction with respect to [Cl2]. If the rate of Cl2 loss is 4.64 × 10-2 M/s, what is the rate of formation of NOCl? 2 NO(g) + Cl2(g) → 2 NOCl(g)
Answer:
[tex]r_{NOCl}=9.28x10^{-2}M[/tex]
Explanation:
Hello!
In this case, given the balanced chemical reaction:
[tex]2 NO(g) + Cl_2(g) \rightarrow 2 NOCl(g)[/tex]
Since there is 1:2 mole ratio between chlorine and NOCl, based on the rate proportions, we can write:
[tex]\frac{1}{-1}r_{Cl_2} =\frac{1}{2}r_{NOCl}[/tex]
It means that for the formation of NOCl, we obtain:
[tex]r_{NOCl}=\frac{2}{-1}r_{Cl_2} \\\\r_{NOCl}=\frac{2}{-1}(-4.64x10^{-2}M)\\\\r_{NOCl}=9.28x10^{-2}M[/tex]
Notice that chlorine is disappearing, which means its rate is negate.
Best regards!
Identify the place which has the highest boiling point of water. Identify the place which has the highest boiling point of water. Denver, Colorado, 5280 feet Death Valley, 282 feet below sea level New Orleans, sea level Mt. Everest, 29035 feet A pressurized passenger jet, 35,000 feet
Answer:
B. because if it was to change so would the amount of wieght that gravity puts on us.
Explanation:
A. might seem right but it's not 35,000 under seal level is the OPPOSITE of 35,000 above sea level.
C. water pressure can change where you are at because of the speed or the type of body of water.
D. it does not make any sense.
hope this helps!!!
Suppose the current flowing from a battery is used to electroplate an object with silver. Calculate the mass of silver that would be deposited by a battery that delivers 1.65 A·hr of charge.
Answer:
m = 0.00659 kg = 6.59 g
Explanation:
From Faraday's Law of Electrolysis, we know that:
m = ZQ
where,
m = mass of silver deposited = ?
Q = charge supplied = (1.65 A-hr)(3600 s/1 hr) = 5940 C
Z = electrochemical equivalent of silver = 1.18 x 10⁻⁶ kg/C
Therefore,
m = (1.11 x 10⁻⁶ kg/C)(5940 C)
m = 0.00659 kg = 6.59 g
The mass of silver that would be deposited by a battery is 6.65 grams
The precipitation of Ag requires the removal of one electron. The reduction process for silver electrode at the cathode is as follows:
[tex]\mathbf{Ag^+ + e^- \to Ag(s)}[/tex]
The current flowing in the battery = 1.65 A = 1.65 C/sThe time at which the current is flowing = 1 hr = 3600sec∴
The charge Q = Current (I) × time (t)Charge Q = 1.65 C/s × 3600 sCharge (Q) = 5940 CIn one mole of an electron, the charge carried = 96500 C
Recall that:
The atomic mass of silver (Ag) = 108 g
∴
The mass of silver that would be deposited in a 5940 C can be computed as:
[tex]\mathbf{=5940\ C \times \dfrac{108 \ g }{96500 \ C}}[/tex]
= 6.65 grams
Learn more about electrodes here:
https://brainly.com/question/17060277?referrer=searchResults
If 75J of heat are applied to 8.4 L of a gas at 732 mmHg and 298K, what is the final temperature, in K, of the gas? Cp for an ideal gas is 20.79 J/mol*K.
Answer:
309 K
Explanation:
Step 1: Convert the pressure to atm
We will use the conversion factor 1 atm = 760 mmHg.
732 mmHg × 1 atm/760 mmHg = 0.963 atm
Step 2: Calculate the moles (n) of the ideal gas
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 0.963 atm × 8.4 L/0.0821 atm.L/mol.K × 298 K
n = 0.33 mol
Step 3: Calculate the temperature change
We will use the following expression.
Q = n × Cp × ΔT
ΔT = Q/n × Cp
ΔT = 75 J/0.33 mol × 20.79 J/mol.K
ΔT = 11 K
Step 4: Calculate the final temperature
T = 298 K + 11 K = 309 K
which have
different numbers of electrons?
Answer:
These are called isotopes. They have the same number of protons (and electrons), but different numbers of neutrons. Different isotopes of the same element have different masses. Mass is the word for how much substance (or matter) something has.
A 2kg metal cylinder is supplied with 1600J of energy to heat it from 5*C to 13*C. What is the SHC of the metal?
Answer:
100Jkg/°C
Explanation:
Given parameters:
Mass of metal = 2kg
Amount of heat energy = 1600J
Initial temperature = 5°C
Final temperature = 13°C
Unknown:
Specific heat capacity of the metal = ?
Solution:
Specific heat capacity of a body is the amount of heat needed to raise the temperature of unit mass of a body by 1°C.
H = m x C x (T₂ - T₁ )
H is the amount of heat
m is the mass
C is the unknown specific heat capacity
T is the temperature
Insert the parameters and solve;
1600 = 2 x C x (13 - 5)
1600 = 16C
C = 100Jkg/°C
Describe the potential energy of a chemical reaction and how the energy is accessed?
Explanation:
The energy released due to breakage of bond or we can say that protons and electrons go from a structure of higher potential energy to lower potential energy. During this change, potential energy is converted to kinetic energy in form of heat.
Generally chemical potential energy is accessed in form heat, which the difference between the potential energies of reactant and product.
1. A baseball pitcher won 75% of the games he pitched. If he pitched 43 ballgames, how many games
did he win?
Answer:
He won 32 games.
Explanation:
Another way of expressing 75% is 75/100.
To calculate how many games the baseball pitcher won, we multiply the total of games played (43, in this case) by the percent won:
43 * 75/100 = 32.25 ≅ 32
So the baseball pitcher won 32 games.
how fast is a formula 1 car? (For my chemistry project)
Answer:
it's 200 mph fast........
A student pipets 5.00 mL of a 5.103 M aqueous NaOH solution into a 250.00 mL volumetric flask and dilutes up to the mark with distilled water. What is the final molarity of the dilute solution?
Answer:
0.102 M.
Explanation:
From the question given above, the following data were obtained:
Volume of stock solution (V1) = 5 mL
Molarity of stock solution (M1) = 5.103 M
Volume of diluted solution (V2) = 250 mL
Molarity of diluted solution (V2) =?
The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:
M1V1 = M2V2
5.103 × 5 = M2 × 250
25.515 = M2 × 250
Divide both side by 250
M2 = 25.515 / 250
M2 = 0.102 M
Thus, the molarity of the diluted solution is 0.102 M.
The dilution of the NaOH results in the dilution of the molarity of the solution. The molarity of the final NaOH solution is 0.102 M.
What is molarity?Molarity is the concentration unit that defines the amount of solute present in a liter of solution.
The dilution of the solution results in a change in the molarity. It can be accessed as:
[tex]\rm M_1V_1=M_2V_2[/tex]
The initial molarity of the solution is, [tex]\rm M_1=5.103\;M[/tex]
The initial volume of the NaOH is, [tex]\rm V_1=5\;mL[/tex]
The final volume of the NaOH is, [tex]\rm V_2=250\;mL[/tex]
Substituting the values for the calculation of final molarity, [tex]\rm M_2[/tex]:
[tex]\rm 5.103\;\M\;\times\;5.0\;mL=M_2\;\times\;250\;mL\\\\M_2=\dfrac{5.103\;\M\;\times\;5.0\;mL}{250\;mL} \\\\M_2=0.102\;M[/tex]
The molarity of the NaOH solution after dilution is 0.102 M.
Learn more about molarity, here:
https://brainly.com/question/12127540
Which statement describes how phase changes can be diagrammed as a substance is heated?
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Answer:
The temperature is on the y-axis and the time is on the x-axis.
Explanation:
Which statement describes how phase changes can be diagrammed as a substance is heated? (D is the answer)
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Which statement describes the appearance of a temperature-vs.-time graph? (C is the answer)
A horizontal line shows that the temperature increases at a constant rate over time.
A vertical line shows that the temperature decreases at a constant rate over time.
Horizontal lines where the temperature is constant during phase changes connect upward-sloping lines where the temperature increases.
Horizontal lines where the temperature increases are connected by upward-sloping lines where the temperature is constant for each phase.
Robert was changing the oil in his truck. He dumped the used oil on the ground in his yard. He didn't know it, but Robert was hurting the environment because the oil-
HELP FAST
Answer:
goes deep into the ground and pollutes the groundwater.
what is the number of each element and the total number of atoms for vinegar?
What is the difference between Mega and Milli symbols?
Answer:
Mega = 10^6
Milli = 10^-3
Explanation:
Mega is whatever times 10 to 6th power.
Milli is whatever times 10 to the -3rd power.
How do you know your cell's are working
How many Stars are In the Milky way Galaxy
Answer:
100 thousand million stars
Explanation:
Answer:
100 to 400 billion stars
Which of the following covalent bonds is the most polar (i.e., highest percent ionic character)?
A) Al I
B) Si I
C) Al Cl
D) Si Cl
E) Si P
Answer:
answer d is correct that works
What are five minerals found on space rocks
Answer:
oxygen, silicon, iron, calcium, sodium
Explanation:
these are all found in space rocks known as meteorites. hope this helps :)
what is the mass of 16.6 x 10^23 molecules of barium nitrate
The mass of 16.6 × 10²³ molecules of barium nitrate is 718.7g
The number of moles of a substance can be calculated by dividing the mass by its molar mass. That is;no. of moles = mass(g) ÷ molar mass (g/mol)no. of moles of Ba(NO3)2 = 16.6 × 10²³ ÷ 6.02 × 10²³no. of moles = 2.75 × 10⁰no. of moles = 2.75moles. Molar mass of Ba(NO3)2 = 261.34g/molmass of Ba(NO3)2 = 261.34 × 2.75Mass of Ba(NO3)2 = 718.7gTherefore, the mass of 16.6 × 10²³ molecules of barium nitrate is 718.7g.Learn more at: https://brainly.com/question/15743584?referrer=searchResults
A container holds 3.41×10−3mol of carbon dioxide (CO2). After the addition of 8.41×10−4mol of carbon dioxide, the volume of the container increases to 95.2mL, with the temperature and pressure remaining constant. What was the initial volume of the container?
Answer:
76.366
Explanation:
Knewton answer is 76.4
Answer:
76.4mL
Explanation:
First, calculate the final number of moles of carbon dioxide (n2) in the container.
n2 = n1+n added = 3.41×(10^-3) mol+8.41×(10^-4) mol = 4.25×(10^-3) mol
Rearrange Avogadro's law to solve for V1.
V1 =(V2×n1)/n2
Substitute in the known values for n1, V2, and n2.
V1 = (95.2mL×(3.41×10^-3 mol))/(4.25×(10^-3) mol)=76.4mL
So the initial volume is 76.4mL.
Scientists who are investigating what has happened over the years to the people who were exposed to radiation during the 1986 Chernobyl nuclear disaster are conducting what type of study
Answer:
Observational study
Explanation:
An investigation of what happened over the years to the people who were exposed to radiation during the 1986 Chernobyl nuclear disaster would be termed an observational study because it will require observing subjects and finding out if there is a kind of correlating factor in the subjects that could indicate the level of exposure to the nuclear radiation.
There are basically two types of research studies:
1. Observational studies
2. Experimental studies
Observational studies involve just the observation of subjects and trying to find out some correlation factors. This kind of study could be prospective when it deals with what could happen in the future based on certain factors or retrospective when it considers what has already happened. An observational study can be cross-sectional, case-only, case-control, or cohort study.
Experimental studies are also referred to as randomized or controlled trial studies. Here, subjects are grouped and each group receives a different treatment in order to isolate the effect of a particular factor or variable relating to the treatment.
If the net force acting on an object is 0 N, the forces are
Since the forces equal to 0, it's balanced because the object isn't moving.
Which of these mixtures would NOT be separated by using simple distillation?
Ink and water
Salt and water
Sand and water
There is a golden role of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, the correct option is option B that is Salt and water.
What is solution?Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution. There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution.
Salt and water because salt is transparent and will dissolve into the water among given solute, salt NaCl is a polar solute which will dissolve in polar solvent that is water.
Therefore, the correct option is option B that is Salt and water.
To know more about solution, here:
https://brainly.com/question/13812915
#SPJ2
12. When the frequency of a wave increases, what happens to the wavelength?
A. The wavelength is not directly affected by the frequency of a wave
B. The wavelength increases
C. The wavelength decreases
D. More specific information is needed to form a conclusion
Answer:
C. The wavelength decreases
Explanation:
This is because frequency is how often the wave hits the top (peak) and the bottom (through). The more it hits the less wavelength it will have because it is moving faster and has more energy.
of the element listed wich
has the largest atomic rodius?
Calcium Cas Copper (ca)
Chromium (Cr)
Cobalt (co)
The atomic radius trend on the Periodic Table is as follows:
- Atomic radius increases down a column (or group)
- Atomic radius decreases across rows (or periods) from left to right
Looking at my Periodic Table, calcium, chromium, cobalt and copper are in that order from left to right in the same period, which simplifies things significantly.
Since these elements are in the same period, and given that we know atomic radius decreases across periods from left to right, we can see that calcium has the largest atomic radius.
1. 2Al(s) + 3H2SO4(aq) → Al2(SO4)3(aq) + 3H2(g) a. Determine the volume (mL) of 15.0 M sulfuric acid needed to react with 45.0 g of aluminum to produce aluminum sulfate. b. Determine the % yield if 112 g of aluminum sulfate is produced under the above conditions.
Answer:
a. 167 mL b. 39.27 %
Explanation:
a. From the chemical equation. 2 mole of Al reacts with 3 mole H₂SO₄ to produce 1 mol Al₂(SO₄)₃.
Now, we calculate the number of moles of Al in 45.0 g Al.
We know number of moles, n = m/M where m = mass of Al = 45.0 g and M = molar mass of Al = 26.98 g/mol.
So n = 45.0 g/26.98 g/mol = 1.668 mol
Since 2 mole of Al reacts with 3 mole H₂SO₄, then 1.668 mole of Al reacts with x mole H₂SO₄. So, x = 3 × 1.668/2 mol = 2.5 mol
So, we have 2.5 mol H₂SO₄.
Now number of moles of H₂SO₄, n = CV where C = concentration of H₂SO₄ = 15.0 M = 15.0 mol/L and V = volume of H₂SO₄.
V = n/C
= 2.5 mol/15.0 mol/L
= 0.167 L
= 167 mL of 15.0 M H₂SO₄ reacts with 45.0 g Al to produce aluminum sulfate.
b. From the chemical reaction, 2 mol Al produces 1 mol Al₂(SO₄)₃
Therefore 1.668 mol Al will produce x mol Al₂(SO₄)₃. So, x = 1 mol × 1.668 mol/2 mol = 0.834 mol
So, we need to find the mass of 0.834 mol Al₂(SO₄)₃. Now molar mass Al₂(SO₄)₃ = 2 × 26.98 g/mol + 3 × 32 g/mol + 4 × 3 × 16 g/mol = 53.96 g/mol + 96 g/mol + 192 g/mol = 341.96 g/mol.
Also number of moles of Al₂(SO₄)₃, n = mass of Al₂(SO₄)₃,m/molar mass Al₂(SO₄)₃, M
n =m/M
So, m = nM = 0.834 mol × 341.96 g/mol = 285.2 g
% yield = Actual yield/theoretical yield × 100 %
Actual yield = 112 g, /theoretical yield = 285.2 g
So, % yield = 112 g/285.2 g × 100 %
= 0.3927 × 100 %
= 39.27 %
The volume (mL) of 15.0 M sulfuric acid needed to react with 45.0 g of aluminum is 166mL and % yield of the reaction is 39.46%.
How do we calculate moles?Moles of any substance will be calculated by using the below formula as:
n = W/M, where
W = given mass
M = molar mass
Given chemical reaction is :
2Al(s) + 3H₂SO₄(aq) → Al₂(SO₄)₃(aq) + 3H₂(g)
Moles of 45g of Al will be calculated as:
n = 45g / 27g/mol = 1.66 mole
From the stoichiometry of the reaction, it is clear that:
1.66 moles of Al = react with 3/2×1.66=2.49 moles of H₂SO₄
By using the formula of molarity we can calculate the volume of H₂SO₄ as:
M = n/V
V = (2.49) / (15) = 0.166L = 166mL
Again from the stoichiometry it is clear that:
1.66 moles of Al = produces 1/2×1.66= 0.83 moles of Al₂(SO₄)₃
Mass of 0.83 moles of Al₂(SO₄)₃ = (0.83mol)(341.96g/mol) = 283.82 g
Given actual yield of Al₂(SO₄)₃ = 112g
% yield will be calculated as:
Percent yield = (Actual yield/Theoretical yield) × 100
% yield = (112/283.82) × 100 = 39.46%
Hence required values are discussed above.
To know more about percent yield, visit the below link:
https://brainly.com/question/8638404
What are things animals might do to survive?
Answer:
Animals need food, water, shelter, and space to survive. Herbivores can live only where plant food is available. Carnivores can live only where they can catch their food. Omnivores can live in many places because they eat both plants and animals.
Which of these lead (II) salts will dissolve to the greatest extent in water?
a. PbSO4, Ksp = 1.7x10^-8
b. PbI2, Ksp = 6.5x10^-9
c. PbCrO4, Ksp = 1.8x10^-14
d. PbS, Ksp = 2.5x10^-27
e. Pb3(AsO4)2, Ksp = 4.0x10^-36
Answer:
a. PbSO4, Ksp = 1.7x10^-8.
Explanation:
Hello!
In this case, since the solubility product indicates how likely a solid is able to ionize and consequently dissolve in water, we can infer that the larger the solubility product Ksp, the more ions are able dissolve in water; therefore the proper answer goes with the largest Ksp, which is a. PbSO4, Ksp = 1.7x10^-8 since the power goes closer to 1 than the other options.
Best regards!