Complete the following: Find the Velocity, Drag Coefficient (CD), and the Reynolds number of the air flow around a blimp if the drag force opposing the blimp is 4,200 N and the power to overcome the drag force of the blimp is 104 hp. The blimp is 85 m long and has a cross-sectional area of 3700 m². The density of the air is 1.10 kg/m² and the viscosity of the air is 1.72E-5 kg/(ms) (1hp/745.7W). Power = F.v -- -C,Apv? 2 Lrhoν Re= u FD

Answer:

E. the same as the length of the ooen open pipe

To achieve the same fundamental frequency as the open-open pipe discussed in Part A, you would need an open-closed pipe with a length that is half the length of the open-open pipe. Therefore, the correct answer is option (a) Half the length of the open-open pipe.

The fundamental frequency of an open-open pipe is determined by the formula f = v / (2 * L), where f is the frequency, v is the speed of sound, and L is the length of the pipe. In contrast, the fundamental frequency of an open-closed pipe is given by the formula f = v / (4 * L).

To achieve the same fundamental frequency for both types of pipes, you need to set their respective frequency formulas equal to each other, i.e., v / (2 * L1) = v / (4 * L2), where L1 is the length of the open-open pipe and L2 is the length of the open-closed pipe. By solving this equation, you will find that L2 = 1/2 * L1, which means that the open-closed pipe should be half the length of the open-open pipe.

learn more about fundamental frequency here: brainly.com/question/2288944

#SPJ11

The substance will be left after 7 days is 6.359 grams (approx.)

Given that the half-life of a radioactive substance is one day and you have 814 grams of this substance, we can construct an exponential model for the amount of the substance remaining on a given day. The general formula for the exponential decay model is:

A(t) = A0 * (1/2)^(t/h)

Where:
- A(t) is the amount of the substance remaining after time t (in days)
- A0 is the initial amount of the substance (814 grams in this case)
- (1/2) is the decay factor, since half of the substance decays every day
- t is the time elapsed (in days)
- h is the half-life (1 day in this case)

So, our exponential model for this problem is:

A(t) = 814 * (1/2)^(t/1)

Now, we'll use the model to determine how much of the substance will be left after 7 days. We'll plug in t = 7 into the equation:

A(7) = 814 * (1/2)^(7/1)

A(7) = 814 * (1/2)⁷

A(7) = 814 * (1/128)

A(7) ≈ 6.359375 grams

After 7 days, there will be approximately 6.359 grams of the radioactive substance left.

To know more about the  half-life refer here :

https://brainly.com/question/24710827#

#SPJ11

The main factor that causes the current to flow is the voltage difference between two points. When there is a difference in electrical potential between two points, the flow of electrons or charges in a circuit is initiated. The voltage difference creates an electric field that drives the charges to move from one point to another.

The other options listed, such as current similarities, points of equal resistance, and resistance differences, are important factors in understanding the behavior of the current flow, but they are not the direct cause of the current. Current similarities and points of equal resistance will result in a steady-state current flow, whereas resistance differences will result in a non-uniform current distribution. Therefore, it can be concluded that the answer to the question "What causes the current to flow?" is E) voltage difference between the two points. Understanding this fundamental concept is crucial in the study and application of electrical circuits and electronics.

learn more about voltage here.

https://brainly.com/question/13521443

#SPJ11

The type of wave that requires a material medium through which to travel is Sound. The correct answer is option A.

Sound waves are mechanical waves, which means they require a medium (such as air, water, or solids) to travel through. In contrast, television, radio, and X-ray waves are all examples of electromagnetic waves, which can travel through a vacuum and do not require a material medium.

Television (option B), radio (option C), and X-ray (option D) waves are all examples of electromagnetic waves that can travel through vacuum and do not require a material medium. Therefore the correct answer is A: Sound.

More on waves: https://brainly.com/question/15591316

#SPJ11

Answer:

V = 331 m/s     speed of sound in dry air

λ = V / f = 331 m/s / 256 / s = 1.29 m

(B) is correct

a. The inductance of the solenoid is 0.0556 H

b. The rate of change of current to produce an emf of 75 mV is -1.35 A/s.

a) The inductance of a solenoid can be calculated using the formula L = (μ₀n²πr²l) / (2l + 3r), where μ₀ is the permeability of free space, n is the number of turns per unit length, r is the radius, and l is the length of the solenoid.

Plugging in the values given, we get

L = (4π x [tex]10^{-7}[/tex] x 400² x π x 0.025² x 0.2) / (2 x 0.2 + 3 x 0.025) = 0.0556 H.

b) The emf induced in a solenoid can be calculated using the formula emf = -L(dI/dt), where L is the inductance and dI/dt is the rate of change of current.

Solving for dI/dt, we get dI/dt = -emf/L. Plugging in the values given,

we get dI/dt = -(75 x [tex]10^{-3}[/tex] V) / 0.0556 H = -1.35 A/s.

So the rate at which current must change through the solenoid to produce an emf of 75 mV is 1.35 A/s.

Learn more about the solenoid at

https://brainly.com/question/15576393

#SPJ4

The question is -

A solenoid of radius 2.5 cm has 400 turns and a length of 20 cm. Find

a) its inductance and

b) the rate at which current must change through it to produce an emf of 75 mV.

To calculate the moment of inertia of a rod of length l rotated about one of its ends, we need to use the formula I = (1/3) * m * l^2. Here, m is the mass of the rod and l is its length.

Plugging in the values given in the question, we get:

I = (1/3) * 5 kg * (2m)^2
I = (1/3) * 5 kg * 4 m^2
I = (5/3) * 4 kgm^2
I = 6.67 kgm^2

Therefore, the correct answer is option c) 6.67 kgm^2.

It is important to note that the moment of inertia depends not only on the mass of the object but also on how the mass is distributed around the axis of rotation. In this case, since the rod is being rotated about one of its ends, the mass is not uniformly distributed and the moment of inertia is higher than if it were being rotated about its center of mass. This concept is crucial in understanding rotational motion and its applications in engineering and physics.

Learn more about inertia here:

https://brainly.com/question/3268780

#SPJ11

The magnitude of the force that our planet's magnetic field exerts on the wire is 0.5 x 10⁻⁴ N, expressed in Newtons.

In physics, a force is an influence that causes the motion of an object with mass to change its velocity, i.e., to accelerate. It can be a push or a pull, always with magnitude and direction, making it a vector quantity.

To find the magnitude of the force that our planet's magnetic field exerts on the wire,

we can use the formula F = BIL, where F is the force, B is the magnetic field strength, I is the current, and L is the length of the wire.

The magnetic field strength of the Earth's magnetic field at its surface is approximately 0.5 Gauss or 5 x 10⁻⁵ Tesla.

Assuming the wire is 1 meter long and carrying a current of 1 ampere from west to east, we can calculate the magnitude of the force as:

F = (0.5 Gauss) x (1 ampere) x (1 meter)

F = 0.5 x 10⁻⁴ Newtons

Learn more about force:

https://brainly.com/question/12785175

#SPJ11

Starting from the largest mass:
1. A typical black hole (formed in a supernova)
2. Main-sequence star of spectral type M
3. A typical neutron star
4. One-solar-mass white dwarf
5. Jupiter
6. The moon

Black holes are the most massive objects in the universe, with a mass that can be billions of times greater than that of our Sun. Main-sequence stars of spectral type M are still relatively massive, with a mass range of 0.1-0.5 solar masses. Neutron stars are extremely dense and have a mass range of 1.1-2 solar masses. White dwarfs, formed by the collapse of a low-mass star, have a mass range of 0.4-1.4 solar masses. Jupiter, a gas giant planet, has a mass of only 0.00095 solar masses. The moon, being a natural satellite, has a very small mass compared to the other objects listed. Ranking from largest to smallest:
1. A typical black hole (formed in a supernova): Black holes have masses several times greater than the sun. The smallest black holes, known as stellar black holes, can have a mass between 3 to 20 solar masses.
2. A one-solar-mass white dwarf: As the name suggests, a one-solar-mass white dwarf has a mass equal to that of the sun, which is approximately 1 solar mass.
3. Main-sequence star of spectral type M: M-type main-sequence stars, also known as red dwarfs, have a mass range between 0.08 to 0.45 solar masses.
4. A typical neutron star: Neutron stars are very dense, compact objects formed in the aftermath of a supernova. Their mass ranges between 1.1 to 2.3 solar masses.
5. Jupiter: Jupiter is the largest planet in our solar system, but its mass is still significantly lower than that of a star. It has a mass of about 0.001 solar masses, or 317.8 Earth masses.
6. The Moon: The Moon is the smallest object in this list, with a mass of approximately 0.0123 Earth masses or 7.34 × 10^22 kg.
So, the ranking based on mass, from largest to smallest, is: black hole, white dwarf, neutron star, main-sequence star of spectral type M, Jupiter, and the Moon.

Learn more about star here: brainly.com/question/7379319

#SPJ11

The environment was quite different. Based on the sediment in the rock sample (photograph X), it is likely that this area was once covered by a shallow sea or ocean. The presence of fine-grained sediment, such as silt and clay, suggests that the water was relatively calm and quiet.

About 290 million years ago, during the Paleozoic era, Kansas was covered by a shallow sea known as the Permian Sea. The sedimentary rocks found in Kansas, including limestone, sandstone, and shale, were deposited in this sea over millions of years.

The environment in which sediment is deposited can provide clues about the conditions of the area at the time. Based on the type of rock you mentioned, it is likely that the sediment was deposited in a marine environment, such as a shallow sea or a shoreline. The limestone could have been formed from the accumulation of shells and other organic material from marine organisms, while the sandstone and shale could have been deposited by erosion and transport of sediment from nearby land.

In terms of the landscape, it is possible that the area that is now Kansas was a low-lying coastal plain, with rivers and streams carrying sediment into the sea. The rolling hills and farm fields seen today are a result of more recent geologic processes, such as erosion and deposition by wind and water.

Overall, the sediment in the rock sample you mentioned was likely deposited in a marine environment in what is now Kansas, during the time period of the Permian Sea.

Learn more about the Paleozoic era:

https://brainly.com/question/1972972

#SPJ11

Hooke's law tell us about the the proportionality of the stress and displacement in a string and the force required to stretch the wire to a further distance of 5.0m is 100N.

Hooke's law states that the force needed to stretch or compress a spring or elastic material is proportional to the distance it is stretched or compressed, as long as the elastic limit of the material is not exceeded.

Mathematically, Hooke's law can be expressed as,

F = -kx, force applied is F, displacement or deformation of the material from its equilibrium position is x, and spring constant is k, which is a measure of the stiffness of the material. Given a force of 40 N stretches the wire through 3 cm, we can use Hooke's law to find the spring constant k,

F = -kx

40 N = -k(0.03 m)

k = -40 N/0.03 m

k = -1333.33 N/m

To find the force needed to stretch the wire through 5.0 cm, we can use the same equation,

F = -kx

F = -(-1333.33 N/m)(0.05 m)

F = 66.67 N

Therefore, a force of 66.67 N will stretch the wire through 5.0 cm.

To find the length that a 100 N force will stretch the wire, we can rearrange the equation to solve for x,

x = -F/k

x = -(100 N)/(-1333.33 N/m)

x = 0.075 m or 7.5 cm

Therefore, a 100 N force will stretch the wire by 7.5 cm.

We assumed that Hooke's law is valid for the wire in question and that the wire does not exceed its elastic limit. We also assumed that the wire has a uniform cross-sectional area along its length and that it behaves as an ideal spring, with no energy losses due to friction or other factors.

To know more about Hooke's law, visit,

https://brainly.com/question/2648431

#SPJ4

The direction of the current in the current-carrying wire that produces the field indicated in the figure is given below.

Conventionally, a positive charge would go in the same direction as an electric current. As a result, the battery's positive terminal receives less current in the external circuit than its negative counterpart. Indeed, electrons would go in the reverse direction across the cables.

According to Fleming's right-hand rule gives which direction the current flows. The right hand is held with thumb, index finger & middle finger mutually perpendicular to each other. The thumb is pointed in direction of motion to magnetic field of conductor relative to magnetic field.

(A) from right hand rule direction of current is towards left.

(B) Out of the Screen.

(C) Lower left to upper right.

According to Fleming's Right Hand Rule, if the thumb, forefinger, and middle finger are arranged in a straight line on the right hand, the thumb will point in the direction of the conductor's motion in relation to the magnetic field, the forefinger will point in the direction of the magnetic field, and the middle finger will point in the direction of the induced current.

Learn more about direction of the current :

brainly.com/question/15912115

#SPJ4

Full Question ;

Consider the following figures. Determine the direction of the current in the current-carrying wire that produces the field indicated in the figure. (a) * * * * * * * * * * * Bin * O out of the screen O into the screen O toward the left toward the right toward the top of the screen toward the bottom of the screen (b) O out of the screen O into the screen O toward the left toward the right O toward the top of the screen toward the bottom of the screen (C) * * * * O out of the screen into the screen lower right to upper left lower left to upper right upper right to lower left upper left to lower right

The number of net proton-proton reactions per second in the Sun is 2.94 x[tex]10^3^8[/tex]. The luminosity produced is 4.428 x[tex]10^-^1^2[/tex] W or 4.43 picowatts (pW).

The mass difference between a single helium nucleus (4.002603 amu) and four hydrogen nuclei (4 x 1.007825 amu) is approximately 0.029661 amu. Converting this to kilograms (1 amu ≈ 1.66 x [tex]10^-^2^7[/tex] kg), the mass difference is 4.92 x[tex]10^-^2^9[/tex] kg.

To find the number of net proton-proton reactions per second in the Sun, we divide the mass of hydrogen converted to helium per second (5 x [tex]10^1^1[/tex]kg) by the mass of a single hydrogen nucleus (1.7 x[tex]10^-^2^7[/tex] kg). This gives us approximately 2.94 x [tex]10^3^8^[/tex] reactions per second.

The luminosity produced by the Sun can be calculated using the formula L = ΔE/t, where ΔE is the energy released and t is the time taken. The energy released is given by ΔE = Δ[tex]mc^2^,[/tex]where Δm is the mass difference and c is the speed of light.

Substituting the values, we have ΔE = [tex](4.92 x 10^-^2^9 kg)(3 x 10^8 m/s)^2[/tex] = 4.428 x [tex]10^-^1^2[/tex] J. Given that 1 watt = 1 J/s, the luminosity produced by the Sun is approximately 4.428 x[tex]10^-^1^2[/tex]W or 4.43 picowatts (pW).

For more such questions on picowatts, click on:

https://brainly.com/question/30742770

#SPJ11

The growth of a black hole at the center of a galaxy is influenced by various factors, including the availability of matter and energy.

In most cases, the black hole is fed by pre-existing interstellar gas and dust that is pulled towards it by the force of gravity. This matter forms an accretion disk around the black hole, which heats up and releases energy in the form of radiation.

Occasionally, a star may wander too close to the black hole and be torn apart by its gravitational pull. This provides additional matter to the black hole and can cause a temporary increase in its growth rate. Collisions with other galaxies can also provide a significant amount of free matter and gas that is pushed out of their regular orbits as a result of the collision.

However, the influence of the galaxy's spin can also play a role in the growth of the black hole. Depending on the orientation of the spin, it can either force matter towards the black hole or away from it, which can impact its growth rate. Overall, the complex interactions between the black hole and its host galaxy can have a significant impact on its growth and evolution over time.

More on black hole: https://brainly.com/question/29848601

#SPJ11

The ratio of K1/K2 is equal to m2/m1, after substituting the kinetic energy equation which is option A.

The momentum (p) of an object is given by:

p = mv

where m is the mass of the object and v is its velocity.

Since the momentum of both objects is the same, we have:

m1v1 = m2v2

where v1 and v2 are the velocities of the first and second objects, respectively.

The kinetic energy (K) of an object is given by:

K = (1/2)mv^2

where m is the mass of the object and v is its velocity.

We can rearrange the momentum equation to get:

v2/v1 = m1/m2

Substituting this into the kinetic energy equation, we get:

K1/K2 = (m1v1^2)/(m2v2^2) = (m1/m2)(v1/v2)^2 = (m1/m2)(m2/m1)^2 = m2/m1

Therefore, the ratio of K1/K2 is equal to m2/m1, which is option A.

To know more about kinetic energy, visit:

https://brainly.com/question/26472013#

#SPJ11

Answer:

A. Cochlear region

Explanation:

The cochlea is a hollow, spiral-shaped bone found in the inner ear that plays a key role in the sense of hearing and participates in the process of auditory transduction. Sound waves are transduced into electrical impulses that the brain can interpret as individual frequencies of sound.

Cone of confusion refers to the region of positions in space where all the sounds produce the same time and level (intensity) differences. The correct answer is C. Cone of confusion.

The cone of confusion is a region in space where all the sounds produce the same time and level (intensity) differences.

When flying over a navigational beacon (like a VOR), there is a zone of indeterminism where the receiver's capacity to determine direction outputs a random direction because there is no direction to the beacon, resulting in a spinning direction indicator display. also describes flying over a magnetic pole and how that affects a magnetic compass.

Learn more about "sound": https://brainly.com/question/1199084

#SPJ11

An observatory records gamma rays and radio waves from the same galaxy. The best claim that indicates the signal with a longer wavelength and predicts the length of time it takes for each type of signal to get to Earth is:
Longer Wavelength: Radio waves

Time Taken to Get to Earth: The waves take the same amount of time.
Radio waves have longer wavelengths than gamma rays, as they fall at opposite ends of the electromagnetic spectrum. However, both signals travel at the speed of light, which means they will take the same amount of time to reach Earth from the galaxy. Since they are emitted from the same source, the time taken for both types of waves to arrive at the observatory will be equal.

learn more about gamma rays here

https://brainly.com/question/23281551

#SPJ11

The minimum allowed gauge of the service conductors would be 1/0 AWG.

To calculate the current at the service entrance, we need to calculate the total power and power factor of the loads.

For the two lathes, the total power is 2 x 15 HP x 0.89 = 26.7 kW, and the power factor is 0.79 lagging. The apparent power (S) can be calculated as S = P / PF = 33.8 kVA.

For the heat pump, the total power is 7 ton x 12,000 BTU/ton x 0.2931 kW/BTU / 1.9 COP = 2.64 kW, and the power factor is 0.95 lagging. The apparent power can be calculated as S = P / PF = 2.78 kVA.

For the two autoclaves, the total power is 2 x 30 BTU/h x 0.98 / 3.412 BTU/kW = 17.5 kW, and the power factor is 0.97 lagging. The apparent power can be calculated as S = P / PF = 18.0 kVA.

For the HID lighting system, the power is 25 kW and the power factor is unity, so the apparent power is equal to the real power, S = P = 25 kVA.

The total apparent power for all loads is S_total = 33.8 + 2.78 + 18.0 + 25 = 79.58 kVA.

If the lighting system is replaced with a T8 fluorescent system that consumes 25% less power, the new power is 0.75 x 25 kW = 18.75 kW. The power factor is 0.91 leading, so the apparent power is S = P / PF = 20.6 kVA.

The new total apparent power for all loads is S_total = 33.8 + 2.78 + 18.0 + 20.6 = 75.18 kVA.

The current can be calculated using the formula I = S / (sqrt(3) x V), where V is the line voltage (480 V):

For the original loads, I_original = 79.58 kVA / (sqrt(3) x 480 V) = 96.4 A

For the new loads, I_new = 75.18 kVA / (sqrt(3) x 480 V) = 91.0 A

Therefore, the change in service entrance current is (91.0 - 96.4) A = -5.4 A.

To determine the minimum allowed gauge of the service conductors, we can use the table in NFPA 70 Article 310.15(B)(16) for 60°C rated conductors in raceways. Based on the calculated current of 96.4 A for the original loads, we would need a minimum of 2/0 AWG copper conductors. However, based on the calculated current of 91.0 A for the new loads, we would only need a minimum of 1/0 AWG copper conductors.

Therefore, the minimum allowed gauge of the service conductors would be 1/0 AWG.

Learn more about service conductors

https://brainly.com/question/28298618

#SPJ4

The formation of warm pools and the rising air found above them  helps drive the east-west circuit of air in the tropics.

This process is known as the Hadley cell circulation and is responsible for driving the east-west circuit of air in the tropics. As air warms and rises near the equator, it creates a low-pressure zone and causes air to flow towards the poles. As the air moves away from the equator, it cools and sinks, creating high-pressure zones and completing the circulation loop. This process is driven by the formation of warm pools of water in the tropics, which act as a heat source and drive the convection that creates rising air.

More on tropical air: https://brainly.com/question/2150687

#SPJ11

The length of each cart would not have a significant impact on the calculation of their speeds or the determination of the collision's elasticity.

Increasing the precision of measurement II, which is the distance between the photogates, would decrease the error when determining if the collision between the two carts is elastic. This is because the photogates measure the time it takes for each cart to pass through, allowing for a calculation of their speeds. A more precise measurement of the distance between the photogates would result in a more accurate calculation of the carts' speeds before and after the collision, which would allow for a better determination of whether the collision is elastic or not. The length of each cart would not have a significant impact on the calculation of their speeds or the determination of the collision's elasticity.

learn more about collision's elasticity.

https://brainly.com/question/31356190

#SPJ11

Increasing the precision of the distance between the photogates would decrease the error when determining if the collision between the two carts is elastic.

Increasing the precision of the measurements of the distance between the photogates would decrease the error when determining if the collision between the two carts is elastic. The distance between the photogates is used to calculate the time it takes for the carts to pass through them, which is then used to determine the speeds of the carts. A more precise measurement of the distance would result in a more accurate calculation of the speeds, thus reducing the error in determining if the collision is elastic or not.

https://brainly.com/question/36950976

#SPJ12

Determining the angular velocity of two disks before and after a collision, the principle of conservation of angular momentum is used. The calculation involves the mass and radius of the disks, as well as their initial angular velocities. After the disks collide, they rotate together counterclockwise at an angular velocity of 50.9 rad/s.

To solve this problem, we need to use the principle of conservation of angular momentum. Before the disks collide, the angular momentum of the system is given by:

L = Ia * ωa - Ib * ωb

where Ia and Ib are the moments of inertia of disks a and b, respectively, and ωa and ωb are their angular velocities. Since the disks are rotating about a common axis, we can add their moments of inertia to get:

I = Ia + Ib

The moments of inertia of the ²are given by:

Ia = (1/2) * ma * ra²

Ib = (1/2) * mb * rb²

where ma and mb are the masses of the disks, and ra and rb are their radii.

Plugging in the values, we get:

Ia = (1/2) * 2.0 kg * (0.5 m)² = 0.5 kg m²

Ib = (1/2) * 2.0 kg * (0.3 m)² = 0.18 kg m²

I = Ia + Ib = 0.5 kg m² + 0.18 kg m² = 0.68 kg m²

Before the collision, disk a has a clockwise angular velocity of 20 rev/s, which is equivalent to:

ωa = 2π * 20 rev/s = 40π rad/s

Disk b has a counterclockwise angular velocity of 20 rev/s, which is equivalent to:

ωb = -2π * 20 rev/s = -40π rad/s

Plugging in the values, we get:

L = Ia * ωa - Ib * ωb

L = 0.5 kg m² * (40π rad/s) - 0.18 kg m² * (-40π rad/s)

L = 34.6 kg m²/s

After the collision, the two disks rotate together at the same angular velocity ω. The moment of inertia of the combined disks is:

I = Ia + Ib = 0.68 kg m²

Using the principle of conservation of angular momentum, we can set the initial angular momentum L equal to the final angular momentum I * ω:

L = I * ω

Solving for ω, we get:

ω = L / I = 34.6 kg m²/s / 0.68 kg m² = 50.9 rad/s

Therefore, the combined disks rotate counterclockwise at an angular velocity of 50.9 rad/s.

To know more about the angular momentum refer here :

https://brainly.com/question/15104254#

#SPJ11

The four tires of an automobile are inflated to an absolute pressure of 2.0 x 10⁵ Pa. A total of 0.024 m2 of each tire is in touch with the ground. Then the weight (Fg) of the automobile is 19.2 × 10³ N.

The definition of pressure is "force per unit area." P = F/A, for example, yields the force on a unit area. Its Pascal (Pa) SI unit is equivalent to N/m2. is a scalar quantity. its dimensions are [M¹ L⁻¹ T⁻²].  Mass times the gravitational acceleration equals weight.

Pressure is P = F/A

Force on each tire,

F' = PA = 2.0 x 10⁵ Pa × 0.024 m²

F' = 4.8 × 10³ N

For on for tires,

F = F'×4

F =  4.8 × 10³ N × 4

F =  4.8 × 10³ N × 4

F = 19.2 × 10³ N

To know more about Automobile :

https://brainly.com/question/1193772

#SPJ

The actual distance between the can and the aquarium is 26.3 cm.

To solve this problem, we need to use the concept of refraction. When light travels from air to water (or any other medium with a different refractive index), it bends or refracts. This means that the fish will see the can of fish food at a different angle than what it actually is outside the aquarium.

To find the actual distance between the can and the aquarium, we can use the formula:

Actual distance = apparent distance / refractive index

The refractive index of water is 1.33. So, if the fish sees the can at a distance of 35 cm, the actual distance between the can and the aquarium will be:

Actual distance = 35 cm / 1.33 = 26.3 cm

For more such questions on Distance.

https://brainly.com/question/17177395#

#SPJ11

The maximum amount that the ball sinks into the sand is 0.0218 m, or about 2.2 cm. Note that the value of the spring constant we used is an approximation, since the sand is not a perfectly elastic material, but it should be a reasonable estimate for the purposes of this problem.

To solve this problem, we can use the principle of conservation of energy. At the top of the drop, the ball has potential energy given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the drop.

At this point, we can use the fact that the ball has sunk a distance of 0.700 m to determine the force applied to the sand. We know that the weight of the ball is given by mg, where g is the acceleration due to gravity, so the force applied to the sand is mg minus the force required to stop the ball from sinking further. This force is equal to the weight of the displaced sand, which is given by the volume of the displaced sand times the density of the sand times g. Since the ball has sunk a distance of 0.700 m, the volume of the displaced sand is given by the area of the base of the hole times 0.700 m. The area of the base of the hole is equal to the area of a circle with a radius of 0.245 m (half the diameter of the ball), which is pi times [tex]0.245^2[/tex]. The density of the sand is not given, so we will assume that it is 1500 kg/[tex]m^3[/tex], which is a typical value for dry sand.

Putting all of this together, we have:

mgh = (1/2)k[tex]x^2[/tex]

mg - (density of sand)x(g)(pi)([tex]0.245^2[/tex])(0.7) = kx

where k is the spring constant of the sand (a measure of how much force is required to compress it), x is the distance the sand is compressed, and we have used the fact that the distance the ball sinks into the sand is equal to the distance the sand is compressed. Solving for k and x, we get:

k = 2mgh/[tex]x^2[/tex]

x = (mg - (density of sand)x(g)(pi)([tex]0.245^2[/tex])(0.7))/k

Plugging in the given values, we get:

k = 2(4.90 kg)(9.81 m/[tex]s^2[/tex])(13.0 m)/(0.700 m[tex])^2[/tex]= 11294 N/m

x = (4.90 kg)(9.81 m/[tex]s^2[/tex]) - (1500 kg/[tex]m^3[/tex])(9.81 m/[tex]s^2[/tex])(pi)([tex]0.245^2[/tex])(0.7))/11294 N/m = 0.0218 m

Therefore, the maximum amount that the ball sinks into the sand is 0.0218 m, or about 2.2 cm. Note that the value of the spring constant we used is an approximation, since the sand is not a perfectly elastic material, but it should be a reasonable estimate for the purposes of this problem.

Learn more about elastic material,

https://brainly.com/question/15244104

#SPJ4

Full Question ;

A 4.90-kg steel ball is dropped from a height of 19.0 m into a box of sand and sinks 0.600 m into the sand before stopping. How much energy is dissipated through the interaction with the sand? Express your answer using three significant digits.

Answer:

Explanation:

0.44

The amount of drinks that would result in a blood alcohol concentration (BAC) of 0.08g/dL or 80mg/dL depends on various factors such as weight, gender, and the amount of time between drinks.

However, on average, it takes about 2-3 drinks for a person weighing around 150 pounds to reach a BAC of 0.08g/dL. It is important to note that different types of alcoholic beverages contain different amounts of alcohol and may affect BAC differently. Therefore, it is important to drink responsibly and always have a designated driver or plan for a safe way home. Hi! The number of drinks corresponding to a blood alcohol concentration (BAC) of 80mg/dL or 0.08g/dL varies depending on factors such as weight, gender, and the time frame in which the drinks are consumed. However, on average, a BAC of 0.08g/dL can be reached by consuming approximately 4 standard drinks within 1-2 hours for a 160-pound male or 3 standard drinks for a 120-pound female. Remember that this is just an estimate, and individual responses may vary.

Learn more about alcohol here

https://brainly.com/question/947751

#SPJ11

Answer:

The mechanical advantage (MA) of a machine is the ratio of the output force to the input force. In this case, the output force is 50.0 N and the input force is 12.5 N, so we can use the formula:

MA = output force / input force

MA = 50.0 N / 12.5 N

MA = 4

Therefore, the actual mechanical advantage of the nutcracker is 4

Due to their proximity to the Pacific Ring of Fire, a region with active tectonic plate boundaries, frequent earthquakes, and volcanic activity, cities along the Pacific Ocean's coastlines, particularly those in the states of Washington, Oregon, California, and Hawaii, are more vulnerable to tsunami hazards.

The engineer's tsunami hazard mitigation plan, which calls for the installation of warning systems to provide citizens advance notice to evacuate in the event of a tsunami disaster, would probably be advantageous for these communities.

Cities in other American coastal regions, such those near the Gulf of Mexico and the Atlantic Ocean, may also be vulnerable to tsunamis brought on by other geological occurrences like submarine landslides or volcanic eruptions. It would be crucial.

To know more about tsunami

https://brainly.com/question/10645383

#SPJ1

The spectrum with a continuous spectrum of colors is the emission from a tungsten lamp, and the spectrum with discrete, bright lines is the emission from a deuterium arc lamp.

The spectrum showing the light intensity of the emission from a tungsten lamp is the one with a continuous spectrum of colors, whereas the spectrum showing the light intensity of the emission from a deuterium arc lamp is the one with discrete, bright lines.

The tungsten lamp emits a continuous spectrum because it is a hot solid, and as such, it emits light across a range of wavelengths.

On the other hand, the deuterium arc lamp contains a gas that emits light only at specific wavelengths when excited by an electric current. This results in bright lines at those wavelengths, creating a distinct pattern in the spectrum.

To know more about spectrum refer here:

https://brainly.com/question/6836691#

#SPJ11

To solve this problem, we can use the conservation of energy and the conservation of angular momentum.

Let's first find the gravitational potential energy at height D. The center of mass of the yo-yo drops by a distance of D/2, so the gravitational potential energy lost is:

ΔU = Mgd/2

where g is the acceleration due to gravity.

Next, we can use the conservation of energy to relate the gravitational potential energy lost to the kinetic energy gained:

ΔU = KE

1/2MV² = Mgd/2

where V is the linear speed of the yo-yo. Solving for V, we get:

V = √(gd)

Next, we can use the conservation of angular momentum to relate the initial angular momentum to the final angular momentum. Since the yo-yo starts from rest, its initial angular momentum is zero. At the bottom of the drop, the entire mass is rotating with an angular speed ω about the central axle. The moment of inertia of the yo-yo can be found by using the parallel axis theorem:

I = 2(1/2MR²) + 1/2M(1/2R)²

I = 5/4MR²

The final angular momentum is:

L = Iω

L = 5/4MR² ω

Since the string is unwinding without slipping from the central axle, the linear speed of any point on the yo-yo is related to its angular speed by:

V = ωR/2

Substituting for V, we get:

5/4MR² ω = 1/2MV²

5/4MR² ω = 1/2M(gd)

ω = (gd)/(5/2R)

Therefore, the linear speed of the yo-yo is V = √(gd), and the angular speed is ω = (gd)/(5/2R).

To know more about the angular momentum refer here :

https://brainly.com/question/31642620#

#SPJ11