CARFIND INC Equity Section of Balance Sheet December 31, 2020
Common shares, unlimited shares authorized; 9,010,526 shares issued and outstanding
Contributed capital: $6,360,000 ($0.90 x 400,000 + $1,452,500)
Retained earnings: $52,800,000 ($51,252,500 + $1,547,500)
Total equity: $59,160,000 ($6,360,000 + $52,800,000)
- On April 1, 2020, 400,000 common shares were issued at $0.90 per share, which resulted in contributed capital of $360,000 ($0.90 x 400,000).
- On June 1, the board of directors declared a 10% share dividend, which means that the number of shares increased by 10% to 6,600,000 shares (6,000,000 x 1.1). However, this does not affect the total equity because the value of each share is reduced by the same proportion.
- On December 11, the board of directors declared a 21 share split, which means that the number of shares increased by 21 times to 138,600,000 shares (6,600,000 x 21). Again, this does not affect the total equity because the value of each share is reduced by the same proportion.
- The profit earned during the year of $1,547,500 is added to the retained earnings.
- The total equity is the sum of contributed capital and retained earnings.
to know more about equity section:
https://brainly.com/question/24113452
#SPJ11
The Pohl Pool Company has six jobs waiting to be processed through its liner department. Processing can start immediately. Total Remaining Processing Time (Days) Due Date (Days from Now Total Remaining Number of Operations Job 13 2 10 12 a. If the slack per operation scheduling rule is used, in what order would the jobs be started? b. What is the mean lateness (in days) of the sequence calculated in question a? c. What is the mean tardiness (in days) of the sequence calculated in question a? d. What is the average number of job in the system using the sequence in question a?
The average number of jobs in the system is the sum of the jobs in the system on each day divided by the number of days, which is (1+2+3+3+2+2+2+2+1+1+1+1+1) / 13 = 1.69 jobs.
The Pohl Pool Company has six jobs to be processed in its liner department.
The company can start processing immediately, but they need to consider the total remaining processing time and due date for each job. To determine the order of processing, the slack per operation scheduling rule is used.
After applying this rule, the order of jobs is determined. The mean lateness and mean tardiness of the sequence are then calculated. Additionally, the average number of jobs in the system using the sequence is determined. These metrics help the company to better understand the efficiency of their liner department and to plan their operations accordingly.
Learn more about average:
https://brainly.com/question/27646993
#SPJ4
If we look only at the domestic market, GDP is calculated using which equation below? O I=Y-C-G O Y = C+I+G(X-M) O S=(Y-(C+T) + (T - G)) O Y = C+I+G
If we look only at the domestic market, GDP is calculated using the equation: Y = C + I + G. In this equation, Y represents GDP, C stands for consumption, I denotes investment, and G signifies government spending.
When considering only the domestic market, GDP can be calculated using the equation Y = C + I + G, where Y represents GDP, C stands for consumption, I denotes investment, and G signifies government spending. Let's break down each component:
Consumption (C): This represents the total amount spent by households on goods and services during the time period being measured. This includes durable goods (such as cars and appliances), nondurable goods (such as food and clothing), and services (such as healthcare and education).
Investment (I): This includes all business spending on physical capital (such as machinery and equipment) and structures (such as factories and office buildings) that are used to produce goods and services.
It also includes changes in business inventories, which represent goods that are produced but not yet sold.
Government spending (G): This represents all spending by the government on goods and services that are used to provide public goods and services, such as national defense, law enforcement, and public education.
To learn more about investment, refer below:
https://brainly.com/question/15353704
#SPJ11
True or false: When tight control over a foreign entity is the goal of a company, it is in the best interest of that company to forge a licensing agreement rather than use foreign direct investment.
The given statement "When tight control over a foreign entity is the goal of a company, it is in best interest of that company to forge licensing agreement rather than use foreign direct investment." is False because foreign direct investment allows the company to have greater control
On the other hand, a licensing agreement involves the company granting permission to a foreign entity to use its intellectual property or technology, but does not give the company direct control over the operations of the foreign entity.
Furthermore, a licensing agreement may also result in the company losing some of its competitive advantage, as it is sharing its intellectual property or technology with a foreign entity. This can make it easier for competitors to enter the market and undermine the company's position. In contrast, foreign direct investment allows the company to maintain its competitive advantage and protect its intellectual property and technology.
In summary, when a company desires tight control over a foreign entity, foreign direct investment is a better option than a licensing agreement. This provides the company with greater control, protection of intellectual property, and helps maintain competitive advantage.
Know more about intellectual property here:
https://brainly.com/question/17348419
#SPJ11
Computer software that aids marketing managers in decision making by helping them anticipate the effect of certain decisions is known as a
a) database.
b) marketing research system.
c) marketing information system.
d) marketing decision support system.
e) single-source system.
The marketing decision support system is an essential tool for modern marketing professionals, providing them with the insights and data they need to make strategic decisions and stay ahead of the competition.
The computer software that aids marketing managers in decision-making by helping them anticipate the effect of certain decisions is known as a marketing decision support system (MDSS). This software is designed to assist marketing professionals in analyzing complex data sets and predicting the impact of different marketing strategies on their target audience.
A marketing decision support system is a critical tool for marketing managers, as it enables them to make informed decisions about marketing campaigns, pricing, product development, and more. The software draws on a wide range of data sources, including customer data, sales data, and market research, to provide marketing professionals with actionable insights that they can use to optimize their campaigns.
MDSS is a subset of the larger marketing information system (MIS), which encompasses a range of tools and technologies designed to help marketing professionals gather, analyze, and disseminate information related to their https://brainly.com/question/24128805, services, and customers. Marketing research systems and databases are two other components of the larger MIS, each of which serves a unique purpose in the marketing process.
Learn More about strategic decisions here :-
#SPJ11
Which of the following items characterize New Tech Company? (It may be more than one option). EXPLAIN (and report your calculations) (1 point).
1. Low debt & unprofitable
2. High debt & unprofitable
3. Decreasing profit margin
4. Increasing sales with a decreasing sales growth rate
5. All the above characterize New Tech Company
Based on the given options, it can be inferred that New Tech Company can be characterized by option 1: Low debt & unprofitable.
This is because the other options do not align with each other. Option 2, high debt & unprofitable, indicates that the company has a high financial risk and is not generating enough revenue to cover its debts. Option 3, decreasing profit margin, implies that the company was once profitable but is now experiencing a decline in its profitability. Option 4, increasing sales with a decreasing sales growth rate, indicates that the company is still generating sales, but its growth rate is slowing down.
In contrast, option 1, low debt & unprofitable, suggests that the company has a low financial risk and has not taken on too much debt. However, the company is not generating enough revenue to cover its expenses and is operating at a loss. To confirm this, we would need more financial data to calculate the debt-to-equity ratio and the profit margin ratio. The debt-to-equity ratio would show how much debt the company has compared to its equity, while the profit margin ratio would show how much profit the company makes from its revenue.
Learn more about debt : https://brainly.com/question/28929846
#SPJ11
The major responsibility of professional cost estimators is to:
a. add 20 percent to all estimates to avoid cost overruns.
b. eliminate unnecessary steps in the original engineering designs.
c. reduce the level of uncertainty in cost estimates.
d. keep upper management happy and stay employed
The major responsibility of professional cost estimators is to (c) reduce the level of uncertainty in cost estimates.
These professionals play a critical role in various industries by providing accurate cost predictions for projects, products, or services. By reducing uncertainty, they assist decision-makers in allocating resources efficiently, setting budgets, and making informed choices. Their expertise enables organizations to plan, execute, and control costs effectively, ultimately contributing to project success and financial stability.
https://brainly.com/question/31720677
#SPJ11
The major responsibility of professional cost estimators is to reduce the level of uncertainty in cost estimates.
This involves analyzing all the factors that can impact the project cost, such as labor, materials, equipment, and overhead, and developing a comprehensive estimate that is as accurate as possible. Estimators also work to identify potential risks and develop contingency plans to mitigate them. Their goal is to provide a realistic estimate that allows the project to be completed on time and within budget, without sacrificing quality. It is not appropriate for cost estimators to add an arbitrary percentage to estimates or eliminate necessary steps in the engineering design process. Additionally, while it is important for any employee to maintain good relationships with upper management, this is not the primary responsibility of cost estimators.
Learn more about realistic estimate here-
https://brainly.com/question/29451042
#SPJ11
Secondary market transactions in the United States mostly take place over the counter and not in exchanges. True False.
True, secondary market transactions in the United States mostly take place over the counter (OTC) and not in exchanges.
OTC trading involves transactions conducted directly between parties without a centralized exchange, allowing for more flexibility and customized terms.
One of the advantages of OTC trading is that it can accommodate a wider range of securities than exchanges, including debt securities, derivatives, and other financial instruments that are not listed on an exchange.
This makes it possible for investors to buy and sell a greater variety of assets, which can be beneficial for portfolio diversification and risk management.
Another advantage of OTC trading is that it allows for greater customization of the terms of the transaction.
Buyers and sellers can negotiate specific terms, such as the quantity of securities to be traded, the price at which they will be traded, and any other conditions that are important to either party.
However, OTC trading also comes with some risks. Because transactions are conducted directly between parties, there is a greater risk of counterparty default or fraud.
Additionally, because the price of the security is not publicly displayed, it may be more difficult for investors to determine the fair market value of the security.
To learn more about portfolio, refer below:
https://brainly.com/question/29333981
#SPJ11
26. All of the following are learning principles except:
A. relevance.
B. commitment.
C. repetition.
D. participation.
E. transference.
Learning principles are fundamental guidelines that govern how people learn and acquire new knowledge. These principles are based on research and empirical evidence and are crucial for designing effective learning experiences.
Repetition, relevance, and participation are all essential learning principles that help learners acquire knowledge and skills. Repetition allows learners to reinforce what they have learned and to commit it to memory. Relevance helps learners to connect new information to their prior knowledge and experiences. Participation engages learners in the learning process and helps them to apply what they have learned. Transference, on the other hand, refers to the ability of learners to apply what they have learned in one context to a new, unfamiliar context.Therefore, the correct answer to the question is B. commitment. While commitment may be a desirable trait for learners, it is not a learning principle. Instead, learning principles focus on the cognitive processes involved in learning and the strategies that can be used to enhance these processes.
Learn more about knowledge here
https://brainly.com/question/24621985
#SPJ11
a. What is the probability that is less than 94? P(X <94) - 0.0359 (Type an integer or decimal rounded to four decimal places as needed) b. What is the probability that is between 94 and 96.5? P(94< X< 96.5)= (Type an integer or decimal rounded to four decimal places as needed)
The probability that X is less than 94 is 0.0516. To find the probability that X is between 94 and 96.5, we need to subtract the probability that X is less than 94 from the probability that X is less than 96.5. This gives us a probability of 0.3721 that X is between 94 and 96.5.
a. The probability that X is less than 94 can be calculated using the standard normal distribution table or a calculator. Using the standard normal distribution table, we can look up the probability corresponding to a z-score of -1.62 (since 94 is 1.62 standard deviations below the mean of 100). The probability is 0.0516. Therefore, P(X < 94) = 0.0516, rounded to four decimal places.
b. To find the probability that X is between 94 and 96.5, we need to calculate the area under the normal curve between those two values. First, we need to standardize the values by calculating their z-scores. The z-score for 94 is -1.62 and the z-score for 96.5 is -0.83. Then, we can use a standard normal distribution table or a calculator to find the probability corresponding to the difference between those two z-scores, which is 0.3721. Therefore, P(94 < X < 96.5) = 0.3721, rounded to four decimal places.
To learn more about Standard Normal distribution, visit:
https://brainly.com/question/14395001
#SPJ11
The sole income receipt for 2021 of an inter vivos trust is $50,000 in non-eligible dividends received from a CCPC. The only beneficiary of the trust is the adult son of the settlor whose sole income for the year is dividends received from the trust. The son is actively engaged in the CCPC on a regular and continuous basis. He has no personal tax credits other than the basic personal tax credit and any credits related to his trust income. Required: Calculate the 2021 net and taxable income and federal income tax payable for both the trust and the beneficiary assuming: A. The beneficiary was paid $28,000 of the dividend income. B. The beneficiary was paid all of the dividend income.
If the beneficiary was paid $28,000, the trust's net income for 2021 would be $22,000, with a tax payable of $3,300, while the beneficiary's net income would be $28,000 with a tax payable of $1,450.
A) If the beneficiary was paid $28,000 of the dividend income, then the remaining $22,000 would be retained in the trust. The trust's net income for 2021 would be $22,000, which would also be its taxable income, as inter vivos trusts are not entitled to the basic personal tax credit. The trust's federal income tax payable for 2021 would be $3,300 (calculated as 15% of the taxable income of $22,000).
The beneficiary's net income for 2021 would be $28,000, which would also be his taxable income. He would be entitled to the basic personal tax credit of $13,808, as well as the dividend tax credit for non-eligible dividends, which would reduce his federal income tax payable to $1,450 (calculated as 15.02% of his taxable income of $28,000, minus the dividend tax credit of $8,062).
B) If the beneficiary was paid all of the dividend income, his net income for 2021 would be $50,000, which would also be his taxable income. He would be entitled to the basic personal tax credit of $13,808, as well as the dividend tax credit for non-eligible dividends, which would reduce his federal income tax payable to $5,556 (calculated as 20.5% of his taxable income of $50,000, minus the dividend tax credit of $10,940).
To learn more about net income
https://brainly.com/question/10207673
#SPJ4
S.O.S. soap pads were advertised on television for many years. When the company discontinued advertising, sales slowly began to decline and consumers gradually forgot the brand name. This illustrates the concept of:
A) decay effects
B) wear out effects
C) carryover effects
D) threshold effects
When the company discontinued advertising, sales slowly began to decline and consumers gradually forgot the brand name. This illustrates the concept of carryover effects
Carryover effects is the concept illustrated in this scenario. Carryover effects refer to the impact of previous advertising on consumer attitudes and behavior that persists even after advertising has stopped. In this case, the company's previous advertising efforts created brand awareness and a positive association with the product, which helped to sustain sales even after advertising stopped. However, over time, without continued advertising efforts, the positive carryover effects gradually wore off, and sales began to decline.
Decay effects refer to the gradual weakening of the impact of advertising over time, as consumers forget or lose interest in the advertised product. Wear out effects occur when repeated exposure to the same advertising message leads to a decrease in its effectiveness. Threshold effects refer to the minimum level of advertising needed to achieve a significant impact on consumer behavior.
Learn more about carryover effects here:
https://brainly.com/question/28150629
#SPJ11
bach co. adopted the dollar value lifo inventory method as of january 1, year 1. a single inventory pool and an internally computed price index are used to compute bach''s lifo inventory layers. information about bach''s dollar value inventory follows: inventory at date base year cost current year cost 1/1, year 1 $90,000 $90,000 year 1 layer $20,000 $30,000 year 2 layer $40,000 $80,000what was the price index used to compute bach''s year 2 dollar value lifo inventory layer?
To compute Bach Co.'s year 2 dollar value LIFO inventory layer, we need to determine the price index used.
The price index is calculated by dividing the current year cost of the base year inventory by the base year cost of the same inventory.
For Bach Co., the base year is year 1, and the current year is year 2. We know that the base year cost of the inventory was $90,000, and the current year cost of the year 2 layer was $80,000.
Therefore, the price index used to compute Bach Co.'s year 2 dollar value LIFO inventory layer is:
Price index = Current year cost of base year inventory / Base year cost of the same inventory
Price index = $80,000 / $90,000
Price index = 0.8889 or 88.89%
So, the price index used to compute Bach Co.'s year 2 dollar value LIFO inventory layer was 88.89%.
You can read more about price index at https://brainly.com/question/1889164
#SPJ11
Managers who do not recognize the benefits of marketing may be most inclined to use which method of communications budgeting?
A) percentage of sales
B) meet the competition
C) what we can afford
D) payout planning
Managers who do not recognize the benefits of marketing may be most inclined to use the "C) what we can afford" method of communications budgeting.
This approach often results in underinvestment in marketing, as it is based on available funds rather than strategic planning or competitive analysis. What we can afford is the method of communications budgeting that managers who do not recognize the benefits of marketing may be most inclined to use. This method involves setting the marketing communications budget based on what the company can afford to spend, rather than on the potential benefits of marketing. This approach may be favored by managers who do not see the value of marketing and view it as an expense rather than an investment.
However, this method may not be the most effective approach to budgeting for marketing communications, as it does not take into account the potential benefits of marketing or the company's marketing goals. Other methods of budgeting for marketing communications, such as the percentage of sales method or the objective and task method, may be more effective in helping the company achieve its marketing objectives and maximize its return on investment.
Learn more about budget here:
https://brainly.com/question/29834161
#SPJ11
Hamilton hoped that _______ would be able to create a single, stable currency for the US.
a decrease in supply will cause the largest increase in price when question 42 options: both supply and demand are inelastic. both supply and demand are elastic. demand is elastic and supply is inelastic. demand is inelastic and supply is elastic.
The correct answer is "demand is inelastic and supply is elastic."
When demand is inelastic, it means that the quantity demanded does not change much in response to changes in price. When supply is elastic, it means that the quantity supplied can easily increase or decrease in response to changes in price.
Therefore, when there is a decrease in supply, the price will increase the most when demand is inelastic and supply is elastic because producers will be able to increase the price without losing too many customers. On the other hand, if both supply and demand are inelastic or elastic, the price increase will not be as significant because either the quantity demanded or supplied will not change much in response to the price increase.
To learn more about Demand and Supply, click here:
https://brainly.com/question/13353440
#SPJ11
PLEASE SHOW SOLVER PARAMETERS
American Steal Company (ASC) makes structural beams in standard weights. The strength of a beam depends on its weight, and industry standards describe 8 standard beam weights. Denote these weights by wf. If a customer request a given strength, then ASC may choose to meet the demand by substituting a beam of greater strength. If the company meets the demand requirement for weight wj by shipping beams of weight wk, then the company incurs a los of 3 (wk-wj) on each substitution because the material cost per unit of weight is $3. In addition, if ASC decides to manufacture a particular weight, then it incurs a monthly setup cost of $120000 on its production line. The demand requirements for the coming months are tabulated below, and all demand must be satisfied. a. Explain why the demand for any weight should be met entirely by beams of the same wight or from a production lot in some previous month. What does this property imply about relevant possibilities for the lot size in month 5?
b. What are the optimal lot sizes for the 8-month planning period?
The relevant possibilities for the lot size in month 5 are those that satisfy the demand for that month while minimizing the total number of different beam weights produced.
a. The demand for any weight should be met entirely by beams of the same weight or from a production lot in some previous month because of the setup cost of production. If ASC decides to manufacture a particular weight, it incurs a monthly setup cost of $120,000 on its production line. Therefore, it is not cost-effective to produce some beams of a specific weight in one month and then produce the remaining beams of the same weight in another month. Instead, the company should aim to produce all the required beams of the same weight in a single month to avoid the setup cost for that weight in subsequent months.
b. To determine the optimal lot sizes for the 8-month planning period, we can use dynamic programming. We can define the state of the system at time t by the remaining demand for each beam weight and the current inventory level of each beam weight. We can then define the value function as the minimum cost to satisfy the remaining demand given the current inventory level and the lot sizes produced in the current and previous months. Finally, we can use backward induction to compute the optimal lot sizes for each month.
Let f(t, d, i) denote the minimum cost to satisfy the remaining demand d and achieve inventory level i for each beam weight at time t. Then we have:
f(8, d, i) = 0 for all d and i (no demand in month 9)
f(t, d, i) = infinity for any d or i that is not feasible
f(t, d, i) = min_k {f(t+1, d-k, i+k) + c(k, i)} for all feasible k, where c(k, i) is the cost of producing a lot of size k given the current inventory level i
We can start the backward induction by computing f(8, d, i) = 0 for all d and i. Then, for t = 7 to 1, we can compute f(t, d, i) for all feasible d and i using the above equation. Finally, we can determine the optimal lot size for month t by finding the value of k that minimizes f(t, d-k, i+k) + c(k, i) for the current state (d, i).
Learn more about demand Visit: brainly.com/question/1222851
#SPJ4
Which method of developing marketing communications budget is often used in highly, competitive markets where rivalries between competitors are intense?
A) percentage of sales
B) meet the competition
C) what we can afford
D) objective and task
The method of developing marketing communications budget that is often used in highly competitive markets with intense rivalries between competitors is B) meet the competition.
This approach involves allocating budget to match or surpass competitors' spending on marketing communications, ensuring that your brand remains competitive. Meet the competition is often used in highly competitive markets where rivalries between competitors are intense. This method involves setting the marketing communications budget based on what competitors are spending. The rationale behind this approach is that companies need to spend a similar amount on marketing communications to remain competitive and achieve similar results.
However, this method may not be appropriate for all companies, as they may have different marketing goals, target markets, and financial constraints. Other methods of developing a marketing communications budget include percentage of sales, objective and task, and what we can afford.
Learn more about marketing communications here:
https://brainly.com/question/28526304
#SPJ11
is the non controlling interest of a partially owned subsidiaryaffected by the unconfirmed intercompany gain on machine sold byparent to subsidiary?yes or no?
Yes, the non controlling interest of a partially owned subsidiary is affected by the unconfirmed intercompany gain on machine sold by parent to subsidiary. This is because the non controlling interest is the portion of ownership in the subsidiary that is not held by the parent company.
Therefore, any gains or losses on intercompany transactions between the parent and subsidiary will affect the subsidiary's overall financial performance, which in turn affects the value of the non controlling interest.
If the unconfirmed intercompany gain on the machine sold by the parent to the subsidiary is recognized by the subsidiary, it will increase the subsidiary's net income and subsequently increase the value of the non controlling interest.
On the other hand, if the gain is not recognized or confirmed, it will have a negative impact on the subsidiary's financial statements and decrease the value of the non controlling interest.
To know more about non controlling interest visit:
https://brainly.com/question/30914541
#SPJ11
payne entered into a written agreement to sell a parcel of land to stevens. at the time the agreement was executed, payne had consumed alcoholic beverages. payne's ability to understand the nature and terms of the contract was not impaired. stevens did not believe that payne was intoxicated. the contract is: a. void as a matter of law. b. legally binding on both parties. c. voidable at payne's option. d. voidable at stevens' optio
The fact that Payne consumed alcoholic beverages does not necessarily imply a lack of contractual capacity. Therefore, the contract between Payne and Stevens is (B) "legally binding" on both parties.
In general, a contract is only voidable if one of the parties lacked the capacity to understand the nature and consequences of the agreement, such as in cases of mental incapacity or duress. However, the fact that Payne consumed alcoholic beverages does not necessarily mean that he lacked contractual capacity, especially if he was still able to understand the terms of the agreement.
Since there is no indication that Payne's ability to understand the nature and terms of the contract was impaired, and Stevens did not believe that Payne was intoxicated, the contract is legally binding on both parties. Option B holds true.
Learn more about legally binding: https://brainly.com/question/30390253
#SPJ11
If the price elasticity of demand for a good is 0.75, the demand for the good can be described as
A. elastic.
B. normal.
C. inelastic.
D. inferior.
If the price elasticity of demand for a good is 0.75, the demand for the good can be described as:
C. inelastic.
An inelastic demand is characterized by a price elasticity of demand that is less than 1. In this case, a 0.75 price elasticity of demand indicates that the percentage change in quantity demanded is less than the percentage change in price, meaning that the demand is relatively insensitive to changes in price.
Elasticity of demand is a measure of how sensitive the demand for a product or service is to changes in price. It measures the percentage change in demand resulting from a percentage change in price. A high elasticity of demand means that a small change in price can result in a large change in demand, and vice versa.
To know more about elasticity of demand refer here:
https://brainly.com/question/30465432#
#SPJ11
which of the following is a physiological or psychological dependency on products or services? question 39 options: consumer terrorism consumer addiction consumerism materialism
Consumer addiction (option b) is a physiological or psychological dependency on products or services.
Consumer addiction refers to the dependency on products or services, often driven by a need for emotional satisfaction, pleasure, or a desire to escape from reality.
Psychological dependence is associated with numerous emotional and cognitive symptoms, whereas physical dependence is typically associated with the development of tolerance and withdrawal symptoms that are not primarily emotional or cognitive in nature.
However, understanding addictive behaviors leads to the conclusion that this artificial designation is based on invalid notions of dualism and that addictive behaviors represent the interplay of psychological and physical mechanisms. The treatment of any addictive behavior should be holistic in nature and consider all empirically validated treatment options that are appropriate for the individual in recovery.
Therefore, the correct option is b. consumer addiction.
Learn more about psychological dependency here: https://brainly.com/question/3390574
#SPJ11
Sheridan Company uses 9400 units of Part A in producing its products. A supplier offers to make Part A for $5. Sheridan Company has relevant costs of $8 a unit to manufacture Part A. If there is excess capacity, the relevant cost of buying Part A from the supplier is $28200. $75200. O $47000. O $0.
If there is excess capacity, the relevant cost of buying Part A from the supplier is $47,000. The correct answer is option " $47000".
This is because the cost to manufacture Part A is $8 per unit, which would result in a total cost of $75,200 for the 9,400 units needed. However, if the supplier offers to make Part A for $5 per unit, the total cost to purchase the 9,400 units would be $47,000 (9,400 x $5). As there is excess capacity, the only relevant cost to consider is the cost to purchase the units from the supplier, as the cost to manufacture the parts in-house is not necessary.
Therefore option "$47000" is correct.
Learn more about Manufacturing Costs: https://brainly.com/question/30545569
#SPJ11
1 I always find that a quick __________________________ with my staff raises morale.
A quick chat or check-in with your staff can definitely help raise morale in the workplace. When employees feel like they are valued and heard, it can have a positive impact on their overall satisfaction with their job.
Taking the time to listen to your team members' concerns and ideas can also lead to improvements in productivity and teamwork. In addition to one-on-one conversations, there are other ways to raise morale in the workplace. Offering incentives or recognition for a job well done can be effective. This can range from verbal praise to small rewards like gift cards or extra time off. Providing opportunities for professional development and growth can also make employees feel valued and invested in their work. Creating a positive work environment is key to raising morale. This includes fostering open communication, providing a comfortable and safe workspace, and promoting a healthy work-life balance. When employees feel like they are part of a positive and supportive team, it can have a significant impact on their motivation and overall job satisfaction. In conclusion, taking the time to connect with your staff, offering incentives and recognition, and creating a positive work environment can all help raise morale in the workplace. By investing in your team members, you can build a stronger and more productive team.
Learn more about morale here
https://brainly.com/question/1326871
#SPJ11
The following transactions occurred for Home Mart Ltd (HML), a hardware distributor, during December of the current year (all the amounts ALREADY include GST):
Dec 3
A large customer made a purchase of $550,000 from HML, agreeing terms of 2/10, n/30.
HML’s cost of goods sold for this transaction was $300,000.
Dec 7
Discovering that he had ordered too much, the customer returned $165,000 of the products he had bought on 3rd Dec from HML
HML accepted the sales return and placed the goods back into the warehouse as inventory (cost of goods, $100,000)
Dec 12
The customer paid off the outstanding amount owed to HML for the 3rd Dec purchase.
Required:
Now, as the accountant for Home Mart Ltd (HML), Journalise the above transactions, accounting for GST. Assume that the firm uses the perpetual inventory system and that there was no opening inventory.(Explanations not required)
On Dec 3, HML recorded the sale, GST collected, and cost of goods sold. On Dec 7, the sales return and inventory increase were recorded along with the associated GST. Finally, on Dec 12, HML recorded the cash received from the customer and reduced the accounts receivable balance.
The GST collected on the sale was also accounted for.
Dec 3:
Accounts Receivable Dr $550,000
Sales Revenue Cr $500,000
GST Collected Cr $50,000
Cost of Goods Sold Dr $300,000
Inventory Cr $300,000
GST Paid Dr $30,000
Dec 7:
Sales Returns and Allowances Dr $165,000
Inventory Dr $100,000
Cost of Goods Sold Cr $100,000
GST Refundable Dr $6,500
Accounts Receivable Cr $165,000
Inventory Cr $100,000
GST Paid Cr $6,500
Dec 12:
Cash Dr $495,000
GST Collected Dr $50,000
Accounts Receivable Cr $550,000
To know more about accounts receivable visit:
https://brainly.com/question/31264990
#SPJ11
tabco incorporated, a calendar year, accrual basis corporation, accrued $48,800 wage and salary expense and a corresponding liability at the end of 2022. how much of the accrued expense is deductible in 2022?
The answer to the question is that the amount of the accrued expense that is deductible in 2022 is dependent on when the wages and salaries are paid.
The detailed answer is that for tax purposes, a corporation may only deduct wage and salary expenses in the year that they are paid, regardless of when they were earned or accrued. Therefore, if the $48,800 in wage and salary expense is paid in 2022, the entire amount will be deductible in 2022. However, if any portion of the accrued expense is paid in 2023 or later, the corresponding portion will be deductible in the year it is paid.
As an accrual basis corporation, Tabco Incorporated records expenses when they are incurred, even if payment is not made until a later date. Since the wage and salary expense of $48,800 was accrued by the end of 2022, the corporation can claim the entire amount as a deductible expense for the 2022 tax year.
Learn more about accrued expense: https://brainly.com/question/28659299
#SPJ11
The approach that pays employees higher wages than what competitors pay their employees in similar roles is called the
A) premium-wage approach.
B) free-rider effect.
C) lead-indicator approach.
D) lead-the-market approach.
E) first-mover advantage.
Option is D) lead-the-market approach. This approach involves paying employees higher wages than competitors in similar roles in order to attract and retain the best talent. It is a proactive strategy aimed at being the leader in the market in terms of compensation and benefits.
The lead-the-market approach is a common strategy used by companies to create a competitive advantage in the labor market. By offering higher wages than competitors, companies can attract and retain the best talent, which can lead to increased productivity and profitability. This approach is often used by companies in industries where there is a shortage of skilled workers, such as technology or healthcare. However, it can also be used in other industries where there is intense competition for top talent. The lead-the-market approach requires careful monitoring of industry trends and competitor wages to ensure that the company is offering a premium wage that is still competitive.
Learn more about proactive strategy: https://brainly.com/question/19568769
#SPJ11
QUESTION# 4 ( 20marks)
Marc Goudreau, administrator of Clearwater Hospital, was puzzled by the prior month's reports. "Every month, it's anyone's guess whether the lab will show a profit or a loss. Perhaps the only answer is to increase our lab fees again."
"We can't," replied Rhoda Groves, the controller. "There are still a lot of complaints about the last increase, particularly from the insurance companies and government health units. They are now paying only about 80% of what we bill. I'm beginning to think the problem is on the cost side."
To determine if the Clearwater lab costs are in line with those of other hospital labs, Goudreau has asked you to evaluate the costs for the past month. Groves has provided you with the following information:
Two basic types of tests are performed in the lab—smears and blood tests. During the past month, 2,700 smears and 900 blood tests were performed in the lab.
Small glass plates are used in both types of tests. During the past month, the hospital purchased 16,000 plates at a cost of $38,400. This cost is net of a 4% purchase discount. A total of 2,000 of these plates were unused at the end of the month; no plates were on hand at the beginning of the month.
During the past month, 1,800 hours of labour time were used in performing smears and blood tests. The cost of this labour time was $18,450.
The lab's variable overhead cost last month totalled $11,700.
Fixed overhead cost last month totalled $10,400.
Clearwater Hospital has never used standard costs. By searching industry literature, however, you have determined the following nationwide averages for hospital labs:
Plates: Three plates are required per lab test. These plates cost $2.50 each and are disposed of after the test is completed.
Labour: Each smear should require 0.3 hours to complete, and each blood test should require 0.6 hours to complete. The average cost of this lab time is $12 per hour.
Required:
Compute the Materials Price Variance for the plates purchased last month, and compute a Materials Quantity Variance for the plates used last month.
For Labour Cost in the lab:
Compute a Labour Rate Variance and a Labour Efficiency Variance.
In most hospitals, three-quarters of the workers in the lab are certified technicians and one-quarter are assistants. In an effort to reduce costs, Clearwater Hospital employs only one-half certified technicians and one-half assistants. Would you recommend that this policy be continued? Explain.
Variance is a statistical measure that measures how far a set of data is spread out from its average value or expected value
Materials Price Variance:
Actual cost of plates = $38,400 (net of discount)
Actual quantity of plates purchased = 16,000
Actual price per plate = $38,400 / 16,000 = $2.40
Standard price per plate = $2.50
Materials Price Variance = (Standard Price - Actual Price) x Actual Quantity
= ($2.50 - $2.40) x 16,000
= $1,600 (Favorable)
The favorable Materials Price Variance suggests that the hospital was able to purchase the plates at a lower price than expected.
Materials Quantity Variance:
Standard quantity of plates for 3,600 tests (2,700 smears + 900 blood tests) = 3 plates per test x 3,600 tests = 10,800 plates
Actual quantity of plates used = 16,000 - 2,000 = 14,000
Materials Quantity Variance = (Standard Quantity - Actual Quantity) x Standard Price
= (10,800 - 14,000) x $2.50
= $8,000 (Unfavorable)
The unfavorable Materials Quantity Variance suggests that more plates were used than expected, which may indicate inefficiencies in the lab's processes.
Labour Rate Variance:
Actual labor cost = $18,450
Actual labor hours = 1,800
Actual labor rate = $18,450 / 1,800 = $10.25 per hour
Standard labor rate = $12 per hour
Labor Rate Variance = (Standard Rate - Actual Rate) x Actual Hours
= ($12 - $10.25) x 1,800
= $3,150 (Favorable)
The favorable Labour Rate Variance suggests that the hospital was able to pay its workers at a lower rate than expected.
Labour Efficiency Variance:
Standard hours for smears = 0.3 hours per smear x 2,700 smears = 810 hours
Standard hours for blood tests = 0.6 hours per test x 900 tests = 540 hours
Standard total hours = 810 + 540 = 1,350 hours
Labour Efficiency Variance = (Standard Hours - Actual Hours) x Standard Rate
= (1,350 - 1,800) x $12
= $5,400 (Unfavorable)
The unfavorable Labour Efficiency Variance suggests that the workers took more time to complete the tests than expected, which may indicate inefficiencies in the lab's processes.
Regarding the employment policy, it is not recommended to continue employing only half certified technicians and half assistants. The labor efficiency variance shows that there may be inefficiencies in the lab's processes, and employing fewer certified technicians could contribute to this issue.
Additionally, having more certified technicians can lead to better quality testing and potentially fewer errors, which could ultimately save costs in the long run.
To learn more about “Variance” refer to the https://brainly.com/question/15858152
#SPJ11
one risk that small businesses normally cover is loss due to the disability of a partner or other key employees of the company.
true or false
The statement is true. Small businesses often face risks associated with the loss of key personnel, including partners or other key employees.
Disability insurance is a common way to mitigate this risk by providing financial protection to the business in the event that a key employee becomes disabled and is unable to work.
This type of insurance can help the business cover expenses related to the disability, such as medical bills and lost wages, and can help ensure that the business can continue to operate smoothly in the absence of the disabled employee.
Without this type of coverage, the financial burden of a disability could be significant for a small business, potentially leading to financial instability or even closure.
To know more about Small businesses here
https://brainly.com/question/13424073
#SPJ11
this textbook costs the bookstore $82 and sells for $112. any unsold copies can be returned to the publisher, less a restocking fee and shipping, for a net refund of $36. a) construct the table of conditional profits. b) how many copies should the bookstore stock to achieve high-est expected value?
To determine the number of copies the bookstore should stock to achieve the highest expected value, we can analyze the profit equation without explicitly constructing a table.
Let's denote:
'x' as the number of copies the bookstore stocks.'p' as the probability of selling a single copy.a) Constructing the conditional profits:The revenue from selling 's' copies would be: [tex]R(s) = 112s[/tex].The cost of returning unsold copies would be: [tex]F(s) = 36(max ( - s, 0))[/tex].The net profit for selling 's' copies would be: [tex]P(s) = R(s) - (82x + F(s))[/tex].
b) Determining the optimal stock quantity:
To achieve the highest expected value, we need to maximize the expected profit.
The expected profit is given by the sum of the products of the probability and the net profit for each scenario:
Expected Profit = [tex]\sigma[P(s) \times p^s \times (1 - p)^{(x - s)}], s = 0 $ to x.[/tex]
To find the optimal stock quantity 'x' that maximizes the expected profit, we can take the derivative of the expected profit with respect to 'x' and set it to zero.
The specific probability 'p' or having additional information, it is not possible to provide an exact numerical solution.
The optimal stock quantity depends on the probability of selling a single copy and requires detailed data or assumptions about the demand for the textbook.
In practice, booksellers often make use of historical sales data or market research to estimate the probability of selling a single copy and then optimize the stock quantity accordingly.
Learn more about profit equation: brainly.com/question/29128534
#SPJ11
An economy is described by the following equations: Desired consumption C^d=130 +0.5(Y-T)-500r Desired investment I^d=100-500r Real money demand L = 0.5Y - 1000r Money supply M = 1320 Full-employment output Y = 500 Government purchases G = 100
Taxes T = 100 Assume that expected inflation is zero so that money demand depends directly on the real interest rate. Also assume the SRAS is horizontal at the current price level. a. Calculate the long-run general-equilibrium values of Output (Y) __
The real interest rate (r): __ (round to three decimal places) The price level (P): __ (round to two decimal places) Investment (I) __ (round to two decimal places) b. Suppose that, because of investor optimism about the future marginal product of capital, the investment function becomes I^d=200-500r. What are the new long-run general-equilibrium values of the real interest rate and the price level? The real interest rate (r) __ (round to three decimal places) The price level (P): __ (round to two decimal places)
the new long-run general equilibrium values are:
The real interest rate (r) = -0.12
The price level (P) = 2.47
a. To calculate the long-run general equilibrium values, we need to set aggregate desired expenditure equal to full-employment output and solve for Y and r.
Aggregate desired expenditure:
Y = C^d + I^d + G
Substituting the given equations:
Y = (130 + 0.5(Y - 100) - 500r) + (100 - 500r) + 100
Y = 330 + 0.5Y - 500r
0.5Y = 330 + 500r
Y = 660 + 1000r
Aggregate supply:
Y = Y(bar)
Equating aggregate desired expenditure with aggregate supply:
660 + 1000r = 500
Solving for r:
r = -0.16
Substituting r into the equation for Y:
Y = 660 + 1000(-0.16)
Y = 500
Substituting Y and r into the equation for real money demand L:
L = 0.5(500) - 1000(-0.16)
L = 580
Substituting Y into the equations for C^d and I^d:
C^d = 130 + 0.5(500 - 100) - 500(-0.16)
C^d = 215
I^d = 100 - 500(-0.16)
I^d = 180
Substituting M and L into the equation for the price level P:
M/P = L
1320/P = 580
P = 2.28
Therefore, the long-run general equilibrium values are:
Output (Y) = 500
The real interest rate (r) = -0.16
The price level (P) = 2.28
Investment (I) = 180
b. If the investment function becomes I^d=200-500r, then the aggregate desired expenditure becomes:
Y = C^d + 200 - 500r + G
Repeating the same steps as before, we get:
r = -0.12
P = 2.47
Therefore, the new long-run general equilibrium values are:
The real interest rate (r) = -0.12
The price level (P) = 2.47
learn more about interest rate here:https://brainly.com/question/13324776
#SPJ11