Calculate the percent composition for each of the elements in Na3PO4. A 5.00 gram sample of an oxide of lead PbxOy contains 4.33 g of lead. Determine the simplest formula for the compound. Balance the following equations by inspection: Cu(N03)2 rightarrow CuO + NO2 + O2 C2H6 + O2 rightarrow CO2 + H2O Mg3N2 + H2O rightarrow Mg(OH)2 + NH3 Magnesium (Mg) reacts with chlorine gas (C12) to produce magnesium chloride (MgC12). How many grams of Mg will react with 2 moles of Cl2? Mg(s) + C12(g) rightarrow MgC12(s) The compound P4S3 is used in matches. It reacts with oxygen to produce P4O10 and SO2. The unbalanced chemical equation is shown below, P4S3(s) + O2(g) rightarrow P4O10(s) + SO2(g) What mass of SO2 is produced from the combustion of 0.331 g P4S3 in excess O2? Nitric oxide is made from the oxidation of ammonia. What mass of nitric oxide can be made from the reaction of 8.00 g NH3 with 17.0 g O2? 4 NH3(g) + 5 O2(g) rightarrow 4 NO(g) + 6 H2O(g) To what volume should you dilute 50.0 mL of 12 M HNO3 solution to obtain a 0.100 M HNO3 solution?

Answer:

to compare the data she has got?

Answer:

n=1 holds two electrons and n=2 holds eight electrons.

Explanation:

Hello

In this case, since the atomic number of aluminum is 13, its electron configuration is:

[tex]Al^{13}: 1s^2,2s^2,2p^6,3s^2,3p^1[/tex]

In such a way, we can see that the level n=1 is filled with two electrons since the subshell s is able to hold two electrons and the level n=2 is also filled but with eight electrons as s holds two whereas p holds 6. Moreover, n=3 is holding three electrons.

Best regards.

Answer:

Specific heat is the amount of heat energy required to raise the temperature of substance by, the units for specific heat is, each element have particular fixed specific heat.

The heat energy change can be obtained by the formula



Temperature change can be represented by 



If we know the specific heat of substance then we can easily calculate the heat energy change of the substance

Answer:

1.4 g H₂O

Explanation:

In a reaction, the reactants are usually not present in exact stoichiometric amounts, that is, in the proportions indicated by the balanced equation. Frequently a large excess of one reactant is supplied to ensure that the more expensive reactant is completely converted to the desired product. Consequently, some reactant will be left over at the end of the reaction. The reactant used up first in a reaction is called the limiting reagent, because the maximum amount of product formed depends on how much of this reactant was originally present. When this reactant is used up, no more product can be formed.

Answer:

4

Explanation:

there is a decimal place present. so you would take away any zeros before the number.

Answer:

4 i think

Explanation:

Answer:

Hi Harshadvani!! These are the answers you need:

Faces - Eight (8)

Vertices - Nine (9)

Edges - Sixteen (16)

Faces - Five (5)

Vertices - Three (3)

Edges - Eight (8)

Faces - Four (4)

Vertices - Four (4)

Edges - Six (6)

✨Thanks!!!☺✨

Answer:

hey there

An octagonal pyramid

8

9

16

A triangular prism

5

3

8

a triangular pyramid

4

4

6

need further explanation???

text me on the comments

Answer:

The charge of cobalt in the salt is + 2.

Explanation:

The charge of the salt = 0 . This is because it is neutral.

Charge of cobalt = ?

Charge of oxygen = -2 (This is a constant value, it is -2 only in peroxides)

Charge of salt = Charge of cobalt + Charge of oxygen

0 = x + (-2)

x = + 2

The charge of cobalt in the salt is + 2.

Answer:

Explanation:

Rivers may be contaminated by sewage.

I do hope I helped you! :)

Answer:

5.4KL

Explanation:

Divide by 1000

Answer:

10 electrons

Explanation:

Answer:

the number of electrons is 13 and neutrons is 14

Answer:

4366.8 grams or 4.4 kg

Explanation:

Density = Mass / Volume

Mass = Density x Volume

M = 6.7 x 6.8 x 4.3 x 22.29

M = 4366.8 g

Best Regards!

Answer:

Limestone caves are formed when acid rain occurs.

Explanation:

When chalk pieces which is made of calcium carbonate react with acetic acid, it produces carbon dioxide, calcium acetate, and water. When calcium carbonate react with Carbonated Water produces calcium bicarbonate. Limestone cave forms when the dissolution of limestone occur when rainwater which is acidic due to the addition of carbondioxide in the air react with limestone. This dissolution removes the lime from the rock and caves are formed.

The chalk has been made up of calcium carbonate. The reaction of calcium carbonate with different solutions results in the formation of varying products.

The reaction of chalk with acetic acid results in the formation of Calcium acetate, with the production of carbon dioxide and water.

The reaction of chalk with carbonated water results in the formation of calcium bicarbonate.

The limestone caves has been formed by the dissociation of limestone with reaction of acid, forming carbon dioxide.

The formation has takes place in the acidic solution, and carbon-dioxide thus the resultant can be due to the acid rain.

For more information about the limestone cave, refer to the link:

https://brainly.com/question/20720004

Answer:

194.569 g

Explanation:

6.022×10^23 molecules = 117.17 g

1 molecules = 117.17/ 6.022×10^23

So, 1×10^24 molecules = (117.17×1×10^24)/(6.022×10^23)= 194.569 g

Answer:

H₂CO₃ (aq) → CO₂ (g) + H₂O (l)

Explanation:

Step 1: Write out unbalanced decomposition equation

H₂CO₃ (aq) → CO₂ (g) + H₂O (l)

Step 2: Balance equation

We see that we have 3 oxygens on both sides of the reaction.

We also see that we have 1 carbon on both sides of the reaction.

We also see that we have 2 hydrogens on both sides of the reaction.

Therefore, the chemical equation is balanced.

Explanation:

The substance A and B will mix into one solution as it is a solvent interactions which is greater than or equal to the solute- solute and the solvent-solvent interactions. Thus when such interactions occurs, it is greater or equal to the some of the other two possible interactions. And here both have the same kind of interaction, and same magnitude, so they will makes to form a solution and mixes properly and spontaneously.

Answer:

d. Transition metals tend to form cations with a charge of +3.

Explanation:

Which statement is incorrect concerning the formation of ionic compounds?

a. Halogens tend to form anions with a charge of -1.  TRUE. Halogens have 7 electrons in their valence shell, so they tend to gain 1 electron to fill their octet.

b. Alkali metals tend to form cations with a charge of +1.  TRUE. Alkali metals have 1 electron in their valence shell, so they tend to lose 1 electron to fill their previous octet.

c. Metals tend to form cations, while nonmetals tend to form anions.  TRUE. Metals have low electronegativity while nonmetals have high electronegativity.

d. Transition metals tend to form cations with a charge of +3.  FALSE. Transition metals form cation with numerous charges.

e. Noble gases tend not to form ionic compounds.​ TRUE. Noble gases are very stable because their octet is full.

most reactive among them is fluorine because it is the most electronegative element

Answer:

fluorine (F)

Explanation:

I took the test on edge

Answer:

B. H2CO3 and KHCO3

Explanation:

The buffer system is a system in which the solution deny for change in the ph level i.e. at the time when the acid is added to it. It can be made either in a weak acid and salt or can be a weak base and its salt. Now when the acid is added to a buffer so the ratio is not impacted due to which it does not change sufficient for pH level

As per the given options, the third one is correct as the H2CO3 denotes a weak acid and the KHCO3 represents the salt. And these two solution does not create any change in the level of pH

Therefore the option B is correct

Answer:

No. It is more dense than the uncrushed bread.

Explanation:

The mass is the same, however the volume has been decreased on the crushed side, forcing more matter into one space, which increases the density.

The loaf of bread was crushed then the density of crushed bread and uncrushed bread is same.  

Density is defined as a measurement of how tightly the material is packed together.

It can also be defined as mass of a unit volume of a material substance.

Density can be expressed as

Density = mass / volume

The density depends on mass and volume and mass and volume of crushed and uncrushed bread is same only surface area changes with structural deformation.

Thus, the loaf of bread was crushed then the density of crushed bread and uncrushed bread is same.  

To learn more about density, refer to the link below:

https://brainly.com/question/15164682

#SPJ2

Answer:

K = [Na2CO3] [H2O] [CO2] / [NaHCO3]²

Explanation:

2NaHCO3(s)⇋Na2CO3 (s) + H2O(g) + CO2(g)

To write an expression for equilibrium constant, K, for the above reaction, it is important that we have an idea of what equilibrium constant is all about and how we can determine it.

Equilibrium constant for a reaction is simply defined as the ratio of the concentration of the product raised to their coefficient to the concentration of the reactant raised to their coefficient.

Thus the expression for the equilibrium constant for the above equation can be written as follow:

K = [Na2CO3] [H2O] [CO2] / [NaHCO3]²

The one compound among the given options that is least soluble in water is;

Option B; CH₃CH₂CH₂F

       We know in chemistry that hydrogen bonding affects solubility in that the presence of hydrogen bonding between the molecules of a substance show us that such molecules are polar. This therefore means that the molecules will be soluble in a polar solvent such as water.

      Looking at the options, all of them form hydrogen bonds except for Option B which has Fluorine (F) alone not directly bonded to hydrogen. Instead the fluorine will be bonded to a carbon atom which means it is not going to be easily soluble in water.

     In conclusion, the one compound that would be the least soluble in water is CH3CH2CH2F.

Read more at; https://brainly.in/question/1201868

The compound that is the least soluble in water is CH₃CH₂COOH, which is also known as ethanoic acid or acetic acid. Therefore, option D is correct.

Ethanoic acid is a weak acid that partially ionizes in water, releasing hydrogen ions (H+) and acetate ions. However, it does not fully dissociate into ions and remains mostly in the molecular form.

1-propanamine can form hydrogen bonds with water through the amine functional group, enhancing its solubility.

1-fluoropropane has a polar C-F bond and can also experience dipole-dipole interactions with water, making it more soluble.

2-propanol, or isopropyl alcohol, is capable of hydrogen bonding with water due to the presence of the hydroxyl group, increasing its solubility.

Dimethylamine can form hydrogen bonds with water through the amine functional group, resulting in higher solubility.

To learn more about the compound, follow the link:

https://brainly.com/question/14117795

#SPJ6

Answer:

Consult labels or instructions before disposing of it. Always wear the proper personal protective equipment. Put all cleaning paper towels in the trash

Explanation:

Gloves should never be removed when disposing of waste, since these can contain infected fluids or even cultivated microorganisms that are pathogens for our lives and can enter through a lesion of the continuity solution of the epithelium in our hands.

In other words, if there is a wound, and it is contaminated with waste by not wearing gloves, the risk of contracting diseases is much greater.

Answer:

Energy

Explanation:

Heat is a form of energy.

Answer:

162.349

Explanation:

(.3060 * 159.37) + (.1579 * 162.79) + (.5361 * 163.92) = 162.349

Answer:

Ni²⁺ and Cl⁻ ions

Explanation:

NiCl₂ is an ionic compound which is composed by 2 chloride ions (Cl⁻) and 1 nickel (II) ion (Ni²⁺). It dissociates in water as follows:

NiCl₂ ⇒ Ni²⁺ + 2 Cl⁻

Therefore, in an aqueous solution of NiCl₂ will be present Ni²⁺ ions and Cl⁻ ions.

Answer:

162.35 amu

Explanation:

Let A represent isotope X-159

Let B represent isotope X-163

Let C represent isotope X-164

The following data were obtained from the question:

Isotope >>> Abundance >>> Mass no

A >>>>>>>> 30.60 >>>>>>>> 159.37

B >>>>>>>> 15.79 >>>>>>>>> 162.79

C >>>>>>>> 53.61 >>>>>>>>> 163.92

Average Atomic mass =.?

The average atomic mass of element X can be obtained as follow:

Average atomic mass = [(mass of A × A%)/100] + [(mass of B × B%)/100] + [(mass of C × C%)/100]

= [(159.37 × 30.60)/100] + [(162.79 × 15.79)/100] + [(163.92 × 53.61)/100]

= 48.77 + 25.70 + 87.88

= 162.35 amu

Therefore, the average atomic mass of element X is 162.35 amu

Answer:

37.1 g of Arsenic

Explanation:

2.98 x 10^21 atoms of Arsenic x 74.92g/6.02 x 10^23

= 223.26 x 10^21/6.02 x 10^23

= 2.2326 x 10^23/6.02 x 10^23

= 37.1 g of Arsenic