Answer:
The atmosphere and Earth's interior are layered by density. The differentiation between these layers is due to processes that took place during the early stages of Earth's formation (ca. 4.5 billion years ago). At this time, melting would have caused denser substances to sink toward the center while less-dense materials would have migrated to the crust.
Gravity pulls more strongly on denser materials so denser materials are at the center of things.
Explanation:
Gravity pulls more strongly on denser materials so denser materials are at the center of things. The lowest layer of the atmosphere is denser than the upper layer. Earth's liquid metal core has convection, which generates the magnetic field.
Denser materials are in the centre of the universe because they are more powerfully pulled toward the centre by gravity.
What is gravity?The force that pulls items toward the centre of a planet or other entity is called gravity. All of the planets are kept in orbit around the sun by gravity.
Gravity applies to anything that has mass. Gravity is stronger for objects with higher mass. Along with distance, gravity weakens as well. Therefore, the gravitational force of two things becomes stronger the closer they are to one another.
The mass of the Earth is what creates gravity. The total gravitational force of all of its mass acts on the weight in your body. What gives you weight is that. Additionally, you would weigh less than you do now if you were on a planet with a lower mass than Earth.
Gravity applies to anything that has mass. Gravity is stronger for objects with higher mass. Along with distance, gravity weakens as well. Therefore, the gravitational force of two things becomes stronger the closer they are to one another.
Therefore, denser materials are closer to the centre of the universe because gravity is more drawn to them.
Read more about gravity, here
https://brainly.com/question/4014727
#SPJ2
What is the molarity of 930 mL of LiCl solution that contains 139.9 g of LiCl?
O A. 3.5 mol/L
O B. 150 mol/L
hipotle and like
O C. 3.3 mol/L
O D. 3.5 x 10-3 mol/L
Answer:
3.5 mol/L
Explanation:
First convert the 139.9g of LiCl into moles of LiCl. Don't do the sig fig rule until the very end.
Second, take 930mL of LiCl and divide it by 1000 to convert it to liters.
Third use the molarity formula which is M=mol/L and divide 0.930L by 3.300773877mol and you will get 3.549219223. This is where the sig fig rule will come into play. 3.5mol/L is a reasonable answer for this problem.
What form do ionic compounds take when solid?
Answer:
lattices
Explanation:
Ionic compounds are crystalline solids under normal conditions, have high melting points, and form lattices at the macroscopic level. Almost all of these solids dissolve in water and conduct electricity when dissolved. These substances are known as electrolytes because they can conduct electricity when in solution.
hope this helps
PPPPPPLLLLLLSSSSS HELP IT DUE IN TWENTY MINUTES WILL GIVE THIRTY POINTS
4. Evaluate: Look at the results of your experiment. What was the relationship between crumple zone rigidity, crumple zone deformation, and maximum force on the dummy?
Answer:
Explanation:
Start by restating the question.
So how is the crumple zone rigidity, crumple zone deformation , and the maximum force of the dummy similar, and how are they different?
The crumple zone increases, the crumple zone deformation increases then decreases then repeated in increasing and decreasing , and the maximum force decreases. Hope that helps!
This is my almost last question plsss help
Answer:
The Government did not encourage Confucius' philosophy until more than 350 years after Confucius first began teaching.
and
Some kinds of Confucianism we're influenced by other philosophies.
. The best way to separate sodium chloride solution and sand is by:
Answer:
Dissolving the mixture in water, filtering and then perform evaporation on the filtrate
Can I have help with this I have no idea, is this a trick question?
Answer:
yes
Explanation:yes
Dãy các chất tác dụng được với dung dịch HCl loãng tạo thành sản phẩm có chất khí
A.BảO,FE,CaCO3 B.Al,MgO,KOH
C.Na2SO3,CaCO3,Zn D.Zn,Fe2O3,Na2So3
why is it important to use deionized water in an experiment
because it removes all of the charged ions in the water, making it safe to mix into medications
Do gasses have a fixed volume
Answer:
No
Explanation: Gases have no fixed volume and no fixed shape. Gases expand to fill the space available. They can also be compressed into a very small space.
is this statement true or false? the chinese knew how to produce silk by about 2700 b.c.
Answer:
its true
Explanation:
I took the test
what if water didnt have a negative charge?
Explanation:
The water molecule has a tiny negative charge near its oxygen atom and a slight positive charge near its hydrogen atoms due to the unequal sharing of electrons.
a 47.0 ml aliquot of a 0.400 m stock solution must be diluted to 0.100 m. assuming the volumes are additive, how much water should be added?
Answer:
141 ml
Explanation:
answer false or true for each question, (1-5). thanks!
a caterpillar travels across the length of a 3.00 m porch in 10.5 minutes. what is the average velocity of the caterpillar in m/s?
Answer:
3.5 meters per second
Explanation:
10.5 divided by 3 equals 3.5
An unknown material has a mass of 4.5 g and a volume of
6.75 cm3. What is the density
Answer:
0.67 cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 4.5 g
volume = 6.75 cm³
We have
[tex]density = \frac{4.5}{6.75} \\ = 0.6666666...[/tex]
We have the final answer as
0.67 cm³Hope this helps you
Ned help with this question
Answer:
135.6
Explanation:
12 * 11.3 = 135.6
To find the mass you have to multiply the density and volume together
If you already have the mass you divide the mass by either the density or volume
Is density a characteristic property of water?
"Density is a characteristic property of water because the density of any sample of water (at the same temperature) is always the same. The density is 1 g/cm3." - Mazza
Can someone solve this question? I'll give brainliest and more points.
Answer:
When a substance undergoes a chemical change it is no longer the same but a burning substance.
Explanation:
That is the correct answer.
Which group will have an electron configuration that ends in s2?
a
Alkali metals (Group 1)
b
Halogens (Group 17)
c
Alkaline earth metals (Group 2)
d
Noble gases (Group 18)
Group 2 metals have 2 electrons in their outer shell. These two electrons are usually found in the s orbital, hence the s².
ayudaaaa por favor
¿Estás de acuerdo con que las industrias petroleas exploten petróleo en zonas de reservas naturales?
Answer:
si estoy de acuerdo cien por ciento
list 5 chemical properties of water??
Answer:
In the presence of a strong electron donor (strong reducing agent), water serves as an oxidizing agent. In the presence of a strong electron acceptor (strong oxidizing agent), water serves as a reducing agent. On-water reactions are a group of organic reactions that take place as an emulsion in water and have an unusual reaction rate acceleration compared with (i) the same reaction in an organic solvent, or (ii) the corresponding dry media reaction.Amphoteric nature : Water can act as both acid and base, which means that it is amphoteric in nature.Hydrolysis reaction : Water has a very strong hydrating tendency due to its dielectric constant. It dissolves many ionic compounds. Some covalent and ionic compounds can be hydrolyzed in water.Redox reactions : Electropositive elements reduce water to hydrogen molecule. Thus, water is a great source of hydrogen.*20 points* Pls answer following the rules of :No files
No links
No inappropiate responce
clean comments
Thank you!!
What direction would this plate move? (the plate is gray in color)
options:
from West to East
from East to West
from South to North
from North to South
Answer:
from south to north thats what it look like
Explanation:
the melting point of a substance is also the same as the:
Answer:
The melting point of a solid is the same as the freezing point of the liquid. At that temperature, the solid and liquid states of the substance are in equilibrium.
Pure gold: 1063
Pure silver: 961
Someone help me with this pls
Answer:
D
Explanation:
Lamps
1. Calculate the energy in joules of a photon of electromagnetic radiation whose frequency is 2.76×1014 s−1 .
Express your answer with the appropriate units.
2. Calculate the energy in joules of a photon of radiation whose wavelength is 418 nm
Express your answer with the appropriate units.
3. What wavelength (in meters) of radiation has photons of energy 6.05×10−19 J ?
Express your answer with the appropriate units.
Answer: 41.5
Explanation:
you are given an unknown liquid and asked to determine its identity. You can measure only one physical property. you decide to heat the liquid. You record that the liquid turns vapor at 100c. this demonstrates which physical property. A. melting point B. boiling point C. ability to conduct electricity D. malleability
Answer:
b. boiling point
Explanation:
List a few properties that elements in Group 1 have in common.
Answer:
The alkali metals are a group of chemical elements in the periodic table with the following physical and chemical properties:
shiny.
soft.
silvery.
highly reactive at standard temperature and pressure.
readily lose their outermost electron to form cations with a charge of +1.
Explanation:
have a great day
Energy is released into the cell by
Answer:
cellular respiration
Explanation:
I will make you brainless answer this 1 Question !
Direction: Answer the missing word
Answer: This means that the color of light with a higher frequency will have a lower wavelength and valence electron energy level.
Explanation: