The signboard Rahul saw was likely a speed limit sign. This sign is used to inform drivers of the maximum speed they should be travelling at in that area.
What is limit?Limit is a mathematical concept that describes the highest or lowest value that a given function or expression can reach. It is used as a tool to measure how a function or expression behaves as its variables approach a certain value. For example, the limit of a function as x approaches infinity is the highest value that the function can take on. It is often used to calculate the area under a curve, the rate of change of a function, and the slope of a line at a given point. Limits are also used to compare the relative sizes of different functions, and to determine the continuity of a function.
To learn more about limit
https://brainly.com/question/14424096
#SPJ9
A A Camot engine works between the se and the sink with efficiency 40% How much perature of the sink be lowered keeping the source parature constant so that its efficiency increases by 10%?
To increase the efficiency of the engine by 10%, the temperature of the cold sink needs to be lowered by 0.25 times the difference between the hot source and cold sink temperatures.
What is the new temperature of the sink?The efficiency of a Carnot engine is given by:
efficiency = (T_source - T_sink) / T_source
where;
T_source is the temperature of the hot source and T_sink is the temperature of the cold sink.If the efficiency of the engine increases by 10%, we can write:
new efficiency = 1.1 x old efficiency
Substituting the expression for efficiency of a Carnot engine, we get:
(T_source - new T_sink) / T_source = 1.1 x (T_source - T_sink) / T_source
Simplifying this equation, we get:
new T_sink = T_sink - 0.1 x (T_source - T_sink) / 0.4
new T_sink = T_sink - 0.25 x (T_source - T_sink)
new T_sink = 0.75 x T_sink + 0.25 x T_source
Therefore, the new temperature of the cold sink is given by 0.75 times the original temperature of the cold sink plus 0.25 times the temperature of the hot source.
Learn more about efficiency here:
https://brainly.com/question/25819144
#SPJ1
use the bamboo framed bike to describe newton's second law of motion and the relationships that exist between force,mass and acceleration
Answer: The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object. As the force acting upon an object is increased, the acceleration of the object is increased. As the mass of an object is increased, the acceleration of the object is decreased
After rubbing two balloons against a sweater, each are held 0.75 meters apart. One balloon has a charge of 2.6 E−6 C. The other balloon has a charge of 2.2 E−7 C. Calculate the electrical force between them.
Remember to identify all data (givens and unknowns), list equations used, show all your work, and include units and the proper number of significant digits to receive full credit.
Answer:
Given:
Distance between the balloons (r) = 0.75 m
Charge on balloon 1 (q1) = 2.6 E−6 C
Charge on balloon 2 (q2) = 2.2 E−7 C
Electric constant (k) = 8.99 × 10^9 N·m^2/C^2
Unknown:
Electrical force (F) between the two balloons
The equation for the electrical force between two point charges is:
F = k * (q1*q2)/r^2
Substituting the given values, we get:
F = (8.99 × 10^9 N·m^2/C^2) * ((2.6 E−6 C) * (2.2 E−7 C))/(0.75 m)^2
F = 4.16 × 10^-6 N
Therefore, the electrical force between the two balloons is 4.16 × 10^-6 N.
Explanation:
Answer:
The electrical force between two balloons is 67.5N.
Explanation:
There are two charged balloons, let's say a and b.
The charge on the balloon a = C
The charge on the balloon b = C
Both balloons are 1 cm apart; it means that the distance r between the balloon a and the balloon b is 0.01 m (since 1 cm = 0.01 m).
We need to find the electrical force between them. By using the Coulomb's law, the magnitude of the electrical force between both the balloon is given as follows:
---------------
Hence, the electrical force between two balloons is 67.5N (three significant figures).
Abody of mass 12kg at rest on smooth surface is affected by a force 48 n what is the acceleration of the body?
Answer:
Acceleration of the body will be 4 m/s²Explanation :
We have ,
Force = 48 NMass = 12 kgAcceleration = ?According to Newton's second law of motion,
F = mawhere F is force, m is mass and a is acceleration.
On putting the values in above formula we will get :
=> 48 = 12 × a
=> a = 48/12
=> a = 4 m/s²Therefore,
The acceleration of the body will be 4 m/s²Difference between lava and magma.(level is grade 4)
Answer: lava is basically what is outside of the earth's surface. And magma is what's inside the earth's surface.
Explanation:
Scientists use the term magma for molten rock that is underground and lava for molten rock that breaks through the Earth's surface.
[Use g = 10 m/s2]
A spring whose constant is 200 N/m can be stretched up to 0.2 meters.
(a) Draw a graph of Force vs. Stretch for this spring, where stretch ranges from zero to the maximum stretch. Be sure to put an appropriate scale on the graph. [HINT: The y-axis does not go from 0 to 200!!!]
(b) If the spring is set vertically and a mass of 0.8 kg hangs from it, what is the stretch of the spring? Mark this point on the graph.
(c) If the spring is stretched from zero to 0.06 meters, what is the potential energy stored in the spring?
(d) How much work must be done to stretch the spring from 0.1 meters to 0.16 meters? Show what this quantity represents on the graph.
Explanation:
(a) The graph of Force vs. Stretch for the given spring can be represented by a straight line passing through the origin with a slope equal to the spring constant. The equation of the line is:
Force = Spring constant × Stretch
F = kx
where k = 200 N/m and x is the stretch of the spring in meters. The graph is shown below:
Force vs. Stretch graph for a spring with k = 200 N/m
(b) When a mass of 0.8 kg hangs from the spring, it experiences a force due to gravity equal to:
F = m × g = 0.8 kg × 10 m/s² = 8 N
Since the spring is in equilibrium, the force exerted by the spring must be equal and opposite to the force due to gravity. Therefore, the stretch of the spring is given by:
F = kx
x = F/k = 8 N / 200 N/m = 0.04 m
The point corresponding to this stretch is marked on the graph as shown below:
Force vs. Stretch graph with a point for a hanging mass of 0.8 kg
(c) The potential energy stored in the spring when it is stretched from zero to 0.06 meters can be calculated using the formula:
U = (1/2) k x²
U = (1/2) × 200 N/m × (0.06 m)² = 0.36 J
(d) The work done to stretch the spring from 0.1 meters to 0.16 meters can be calculated by finding the area under the Force vs. Stretch graph between these two stretches. This represents the change in potential energy of the spring due to the stretching. The work done is given by:
W = ΔU = U₂ - U₁
where U₁ and U₂ are the potential energies of the spring at stretches of 0.1 m and 0.16 m, respectively.
Using the formula for potential energy, we have:
U₁ = (1/2) k x₁² = (1/2) × 200 N/m × (0.1 m)² = 1 J
U₂ = (1/2) k x₂² = (1/2) × 200 N/m × (0.16 m)² = 2.56 J
Therefore, the work done is:
W = ΔU = U₂ - U₁ = 2.56 J - 1 J = 1.56 J
The area under the graph representing this work is shown below:
Force vs. Stretch graph with shaded area representing work done
Attachment has the question, Thankyou
The magnitude of the car's centripetal acceleration will be equal to the magnitude of its tangential acceleration 12.5 seconds after starting.
Centripetal vs tangential accelerationThe centripetal acceleration, ac, of an object moving in a circular path of radius r and tangential speed v is given by:
ac = v^2/r
The tangential acceleration, at, is given by:
at = a
where a is the constant tangential acceleration.
Let's assume that the car starts at rest at the edge of the track, so its initial tangential speed, v0, is zero. Then the tangential speed of the car at time t is:
v = v0 + at = at
The time t when the magnitudes of ac and at are equal can be found by setting ac = at and solving for t:
ac = at
v^2/r = a
(at)^2/r = a
t = sqrt(ar/at)
Substituting r = 125 m and a = 1.5 m/s^2:
t = sqrt((1.5 m/s^2)(125 m)/(1.5 m/s^2)) = 12.5 s
Therefore, the magnitude of the car's centripetal acceleration will be equal to the magnitude of its tangential acceleration 12.5 seconds after starting.
More on centripetal acceleration can be found here: https://brainly.com/question/14465119
#SPJ1
16. The density difference between warm, moist air and cold air causes the moist
air to rise. This is key to forming
A. lightning.
B. clouds.
C. stars.
D. snow.
Warm, moist air rises because of the difference in densities between warm, moist air and cold air, which is essential for the formation of clouds.
The moisture in the air condenses into minute water droplets or ice crystals when warm, wet air rises and cools. Clouds are made up of these suspended ice crystals and water droplets.
By reflecting sunlight back into space and storing heat, clouds play a significant part in the Earth's climate system, influencing temperature and weather patterns.
Although lightning is frequently connected to clouds, moist air does not directly cause lightning to occur. Electric charge builds up in the atmosphere, typically during thunderstorms, which leads to lightning.
Snow is created by the freezing of water vapor in the atmosphere, just as stars are created by the gravitational collapse of gas and dust clouds in space.
learn more about density here
https://brainly.com/question/26364788
#SPJ1
A rocket at rest on the ground with initial mass 20,000 kg, 80% of which is fuel, burns 200kg/s as it flies
directly upwards. The exhaust gas exits the rocket at a relative speed of 1.80 km/s. Find (a) the thrust of
the rocket, (b) how long it takes to exhaust its fuel, and (c) the rocket’s speed at the end of its engine burn.
Assume g is constant and neglect air resistance.
For Part A I got: 360,000 Newtons, Part B: 20 Seconds, Part C 205.658 m/s
Are my answers correct?
3.89 km/s is the rocket's final engine burn speed.
Calculation-The rocket equation can be used to determine the rocket's thrust:
Thrust is calculated as follows: (final mass flow rate minus initial mass flow rate) x (exhaust gas mass flow rate x exhaust gas velocity)
The initial mass flow rate is 16,000 kg/s (0.8 x 20,000 kg).
The final mass flow rate is equal to 20,000 kg - 200 kg/s x t, where t is the engine's burn period.
We obtain the following by substituting the values in the question:
Thrust equals 360,000 N when calculated as (200 kg/s x 1.8 km/s + (20,000 kg - 200 kg/s x t - 16,000 kg) x 1.8 km/s)
(b) The time it takes to exhaust the fuel can be calculated by equating the initial and final masses:20,000 kg - 200 kg/s x t = 0.2 x 20,000 kg
t = 20 seconds.
(c) The rocket equation can be used to determine the rocket's speed at the conclusion of its engine burn:
V is equal to (exhaust velocity) x ln[(initial mass)/(final mass)].
The rocket's final mass, which is what remains after all of its fuel has been consumed, is as follows:
final mass = (mass of rocket) - (mass of fuel)
final mass = 20,000 kg - 16,000 kg
final mass = 4,000 kg
Δv = 1.80 km/s x ln[(20,000 kg) / (4,000 kg)]
Δv = 1.80 km/s x ln(5)
Δv = 3.89 km/s
to know more about relative speed here;
brainly.com/question/14362959
#SPJ1
Refer to the standard normal distribution. Find a z value such that the probability of obtaining a larger z value is:
a) 0.05.
b) 0.025.
c) 0.20
Answer:
Explanation:
a) To find a z value such that the probability of obtaining a larger z value is 0.05, we need to find the z value such that the area to the right of it is 0.05. Using a standard normal distribution table or calculator, we find that z = 1.645.
b) To find a z value such that the probability of obtaining a larger z value is 0.025, we need to find the z value such that the area to the right of it is 0.025. Using a standard normal distribution table or calculator, we find that z = 1.96.
c) To find a z value such that the probability of obtaining a larger z value is 0.20, we need to find the z value such that the area to the right of it is 0.20. This is equivalent to finding the z value such that the area to the left of it is 0.80. Using a standard normal distribution table or calculator, we find that z = 0.84 (rounded to two decimal places).
Waves in a lake are 6.0 m apart and pass a person on a raft every 2.0 s.
What is the speed of the waves?
Answer:
The speed of wave is 3m/s
A 50.0-g
meter stick is balanced at its midpoint ( 50.0 cm
). Then, mass 1=0.200 kg
and mass 2=0.300 kg
are hung with light string from points at 1=20.0 cm
and 2=70.0 cm,
respectively, as shown in the figure. Define the counterclockwise direction to be positive.
Calculate the torque 0,1
acting on the meter stick due to 1,
the torque 0,2
due to 2,
the torque 0,stick
due to the weight of the meter stick, and the torque 0,pivot
due to the pivot, all about an axis pointing out of the screen at the 0.00-cm
point.
The torque 0,1 acting on the meter stick due to 1 is 3.92Nm.
The torque 0,2 acting on the meter stick due to 1 is 20.94Nm.
The torque 0,stick due to weight of meter stick is 2.45Nm.
The torque 0,pivot acting due to pivot is 0.
What is torque?The rotating equivalent of force is torque. The moment of force is another name for it (also abbreviated to moment). It illustrates how a force can cause a change in the body's rotational motion.
The definition of torque is the product of the force's perpendicular component's magnitude and the force's line of action's separation from the point being measured. Torque can also be understood in terms of the law of conservation of energy.
Using the formula:
τ= r × F
where,
τ is the torque,
F is the force and,
r is the distance of the line of action of a force from the point around which torque is being determined.
Substituting the values and solving for torque:
The torque 0,1 acting on the meter stick due to 1 is 3.92Nm.
The torque 0,2 acting on the meter stick due to 1 is 20.94Nm.
The torque 0,stick due to weight of meter stick is 2.45Nm.
The torque 0,pivot acting due to pivot is 0.
To know more about Torque, visit:
https://brainly.com/question/25708791
#SPJ9
Car A and car B set off from the same point to travel the same journey. Car A sets off three minutes before car B. If car A travels at 60 km/h and car B travels at 70 km/h, how many kilometres from the starting point will the two cars draw level?
Answer:
Let's start by calculating how much of a head start Car A has in distance before Car B starts.
In 3 minutes, Car A will have travelled:
d = r * t = (60 km/h) * (3/60) h = 3 km
So when Car B starts, Car A is 3 km ahead.
Now let's consider the time it takes for both cars to meet. Let's call the time it takes for both cars to meet t.
During that time, Car A will travel at a speed of 60 km/h, and Car B will travel at a speed of 70 km/h.
The distance that Car A will travel during that time is:
dA = 60 km/h * t
The distance that Car B will travel during that time is:
dB = 70 km/h * t
The total distance between the two cars when they meet is:
d = dA + dB
We want to find the value of t that makes dA + dB = 3 km (the distance that Car A is ahead of Car B when Car B starts).
Substituting the expressions for dA and dB, we get:
60 km/h * t + 70 km/h * t = 3 km
Simplifying, we get:
130 km/h * t = 3 km
t = 3 km / 130 km/h
t = 0.0231 h
Now we can calculate the distance that both cars will have travelled when they meet:
dA = 60 km/h * 0.0231 h = 1.38 km
dB = 70 km/h * 0.0231 h = 1.61 km
d = dA + dB = 1.38 km + 1.61 km = 2.99 km
Therefore, the two cars will draw level after travelling approximately 2.99 km from the starting point.
The left-right reversal of an object is called (a) lateral inversion
(b) lateral reflection
(c) parallel inversion
(d) parallel reflection
The left-right reversal of an object is called as : (a) lateral inversion
What is meant by lateral inversion?Apparent reversal of mirror image's left and right when it is compared with the object is called as lateral inversion. Lateral means sideways. In plane mirror, each point on image is as far behind the mirror plane as the corresponding point on object is in front.
The phenomenon where left appears as the right and vice versa in a mirror is known as lateral Inversion.
Lateral inversion is the side ways reversal of image's left and right when compared to that of the object and lateral inversion is observed in images formed by plane mirror.
To know more about lateral inversion, refer
https://brainly.com/question/12316333
#SPJ1
Write a 16 line poem that describes centripal force utilizing all key concepts and terms. physics pls
A force known as centripetal force causes centripetal acceleration.
What exactly is centripetal force?An object must experience a force directed towards the centre of the circle in order to travel evenly in a circle, because all things moving in uniform circular motion accelerate towards the centre. Its motion is caused by centripetal force. Gravity creates centripetal force in the event of orbiting satellites such as the moon orbiting the earth or the earth orbiting the sun. As athletes spin a huge ball on a chain, such as in the Olympic hammer throw, they generate centripetal force, which is then transmitted through the chain.
Newton's second law states that force and acceleration are connected by the formula F=ma. We already have formulas that express the centripetal acceleration relationships, so we can easily tweak them to demonstrate the relationships.
To know more about centripetal force visit:
brainly.com/question/14021112
#SPJ9
A scale used to weigh fish consists of a spring hung from a support. The spring's equilibrium length is 10.0 cm. When a 4.0 kg fish is suspended from the end of the spring, it stretches to a length of 12.0 cm.
What is the spring constant k for this spring?
If an 8.0 kg fish is suspended from the spring, what will be the length of the spring?
.
Answer:
We can use Hooke's Law to find the spring constant k:
F = kx
where F is the force applied to the spring, x is the displacement of the spring from its equilibrium length, and k is the spring constant.
We can find the force applied to the spring by using the weight of the 4.0 kg fish:
F = mg = (4.0 kg)(9.81 m/s^2) = 39.24 N
The displacement of the spring is the difference between its length with the fish and its equilibrium length:
x = 12.0 cm - 10.0 cm = 2.0 cm = 0.02 m
Now we can solve for k:
k = F/x = 39.24 N / 0.02 m = 1962 N/m
To find the length of the spring with an 8.0 kg fish suspended from it, we can use the same formula with the new weight:
F = mg = (8.0 kg)(9.81 m/s^2) = 78.48 N
We can solve for x, which is the new displacement of the spring:
x = F/k = 78.48 N / 1962 N/m = 0.04 m
Therefore, the length of the spring will be:
10.0 cm + 4.0 cm = 14.0 cm
Explanation:
The engines on an airplane cause the airplane to accelerate down the runway. The acceleration is 7.00 ft/s/s. How far does the airplane go in a time of 27 sec?
The distance travelled by the plane in 27 seconds, given that the acceleration of the plane is 7.00 ft/s/, is 2551.5 ft
How do i determine the distance travelled by the plane?The distance travelled by the plane in 27 seconds can be obtained as illustrated below:
Acceleration of plane (a) = 7.00 m/s/sInitial velocity of plane (u) = 0 ft/sTime taken (t) = 27 secondsDistance travelled by the plane (s) =?s = ut + 1/2at²
s = (0 × 27) + (1/2 × 7 × 27²)
s = 0 + (3.5 × 729)
s = 0 + 2551.5
s = 2551.5 ft
From the calculation made above, we can conclude that the distance travelled is 2551.5 ft
Learn more about distance travelled:
https://brainly.com/question/18265275
#SPJ1
Draw the trajectory of the shuttlecock before it was smashed by the player and right after it went down on the other side of the net. You can use arrow line to indicate its direction.
The trajectory of the shuttlecock before it was smashed by the player and right after it went down on the other side of the net is shown in the attachment.
What is the trajectory of a projectile?The trajectory of a projectile is the path that an object takes through the air when it is thrown, and launched into the air.
The trajectory of a projectile is affected by several factors including the initial velocity of the object, the angle at which it was launched, the air resistance, and the gravitational pull of the earth.
In the absence of air resistance, the trajectory of a projectile would follow a parabolic path. However, in the presence of air resistance, the trajectory of the projectile will be affected by the forces of air resistance, and the path will deviate from a perfect parabolic shape.
Learn more about the trajectory of a projectile at: https://brainly.com/question/20794482
#SPJ1
1. What is the maximum possible number of components of a vector can have
Answer:
The maximum possible number of components a vector can have is infinite
Explanation:
In mathematics, a vector is a mathematical object that has both magnitude and direction, and it can have any number of components, as long as it makes mathematical sense.
For example, a vector in two-dimensional space has two components (x and y), while a vector in three-dimensional space has three components (x, y, and z). However, vectors can also exist in higher-dimensional spaces, such as four-dimensional space or n-dimensional space, and in those cases, they can have more components.
It is worth noting that in practice, vectors with an extremely large number of components may not be useful or computationally feasible to work with. However, from a theoretical standpoint, vectors can have as many components as needed to describe a given situation.
The gravitational force between two objects will be greatestin which of the following situations?
Answer: Both objects have small masses, and are close together.
Explanation:
Hope it helps :> <3A ball is tossed up into the air and falls back down to the ground as it moves from point A to point E as seen in the picture below. When will the ball's potential energy be decreasing and its kinetic energy increasing?
Answer:
Energy = Potential Energy + Kinetic Energy
E = M g h + 1/2 M v^2
On the way up h (height) is increasing and the velocity v is decreasing.
Between C and E the given conditions hold
The wave in the liquid travels towards the surface at an angle. Fig 9.2 shows the centres of the compressions of the sound wave in liquid. Some compressions shown have reached the liquid-air boundary. The parts of these compressions in the air are not shown on Fig 9.2 These waves are also reflected at the boundary. Draw on the diagram the reflected wavefronts.
The image of the reflected sound wavefronts traveling through a liquid is found in the attachment.
What are reflected sound wavefronts?Reflected sound wavefronts refer to the waves of sound that are bounced back or reflected off of a surface such as a wall, ceiling, or floor.
When a sound wave travels through the air and encounters a surface, some of the sound energy is absorbed by the surface, while some of it is reflected back into the air.
These reflected sound waves can interfere with the original sound waves, leading to complex patterns of sound intensity and phase.
Learn more about wavefronts at: https://brainly.com/question/637931
#SPJ1
A caterpillar crawls 15 centimeters east along a leaf, turns around, and crawls 8.3 centimeters west. What is the caterpillar's total displacement in centimeters?
Answer: 6.7 CENTIMETERS
Explanation: 15 EAST AND 8.3 WAST
NET DISPLACEMENT 15-8.3= 6.7
wich the following hasta the most momentum?
A)50 g bullet moving at 200m/s
B)50kg boy running at 8 m/s
C)1000 kg automobile moving at 4m/s
D1,000,000 kg Cruise ship docked in a harbor
Answer for A) momentum = 10 N/s B) momentum = 400 N/s C) momentum = 4000 N/s D) momentum = 0 N/s. Hence, the option C has the most momentum.
To determine which of the given options has the most momentum, we need to calculate the momentum of each object using the formula:
momentum = mass x velocity
A) 50 g bullet moving at 200 m/s:
mass = 50 g = 0.05 kg
velocity = 200 m/s
momentum = 0.05 kg x 200 m/s = 10 N/s
B) 50 kg boy running at 8 m/s:
mass = 50 kg
velocity = 8 m/s
momentum = 50 kg x 8 m/s = 400 N/s
C) 1000 kg automobile moving at 4 m/s:
mass = 1000 kg
velocity = 4 m/s
momentum = 1000 kg x 4 m/s = 4000 N/s
D) 1,000,000 kg Cruise ship docked in a harbor:
mass = 1,000,000 kg
velocity = 0 m/s (since the ship is docked)
momentum = 1,000,000 kg x 0 m/s = 0 N/s
Therefore, option C, the 1000 kg automobile moving at 4 m/s, has the most momentum with a value of 4000 N s. This is because momentum is directly proportional to both mass and velocity. The greater the mass and velocity of an object, the greater its momentum will be.
Option A, the 50 g bullet moving at 200 m/s, has a smaller momentum compared to the others due to its low mass despite having a high velocity.
Option B, the 50 kg boy running at 8 m/s, has a higher momentum than the bullet but lower than the automobile because of its higher mass but lower velocity.
Lastly, option D, the 1,000,000 kg Cruise ship docked in a harbor, has zero momentum since it is not moving (velocity is zero).
The momentum of an object is an important concept in physics that describes the quantity of motion possessed by it. It is determined by the product of mass and velocity, and the object with the highest mass and velocity has the greatest momentum.
To know more about momentum click here
brainly.com/question/30677308
#SPJ1
when a58g tennis ball is served.it accelerate from rest to aspeed of 45m/s.the impact with the racket gives the ball acontant acceleration over adistance of44cm.what is the magnitude of the net force acting on the ball?
Answer: We first calculate the acceleration on the ball using:
2as = v² - u²; u = 0 because ball is initially at rest
a = (36)²/(2 x 0.35)
a = 1850 m/s²
F = ma
F = 0.058 x 1850
= 107.3 Newtons
Explanation:
A 7.00 g bullet moving horizontally at 200 m s-1 strikes and passes through a 150 g wooden block which is on a smooth horizontal surface. Just after the impact the block gained a velocity of 180 cm s-1. Calculate the speed of the bullet after it passed through the block.
The speed of the bullet after it passed through the block is 198.138 m/s. We can make use of the conservation of momentum principle, which asserts that if no outside forces are acting on a system, its overall momentum will remain constant.
In physics, what is a momentum?Mass in motion is quantified by momentum, which is the measure of how much mass is moving. It typically has the sign p.
Before the collision, the bullet has a momentum given by:
p1 = mv1
where m = mass of the bullet and v1 = velocity.
After the collision, the bullet and the wooden block move together with a common velocity v2. The momentum of the combined system is,
p2 = (m + M) v2
where M = mass of the wooden block.
Since there are no external forces acting on the system, we can equate the initial and final momenta:
p1 = p2
mv1 = (m + M) v2
Solving for v2:
v2 = (mv1) / (m + M)
Substituting the given values:
m = 7.00 g = 0.00700 kg
v1 = 200 m/s
M = 150 g = 0.150 kg
v2 = (0.00700 kg x 200 m/s) / (0.00700 kg + 0.150 kg)
v2 = 1.862 m/s
Since the wooden block gained a velocity of 180 cm/s (1.8 m/s) after the impact, the velocity of the bullet after passing through the block is:
v3 = v1 - v2
v3 = 200 m/s - 1.862 m/s
v3 = 198.138 m/s
To know more about the momentum visit:
https://brainly.com/question/18798405
#SPJ1
A magnetic field is the area around a magnet where it's force can be felt. Magnetic fields are invisible. How did part 1 of the Procedure and Data section provide evidence that magnetic fields exist?
Part 1
1. Tape one magnet to a smooth, flat surface. Place the other magnet on that surface 10 cm away, oriented so that its north pole is facing the south pole of the other magnet. Slowly push the free magnet toward the magnet that it taped down.
The Procedure and Data section provides evidence that magnetic fields exist by demonstrating the force exerted by a magnetic field on a nearby object. In this experiment, two magnets are used, and one magnet is taped down on a smooth.
What are magnets ?A magnet is an object that produces a magnetic field, which is a force that can attract or repel certain materials, such as iron, nickel, and cobalt. Magnets have two poles, called the north pole and the south pole, which are opposite in nature and attract each other, while like poles repel each other. This property of magnets is used in various applications, such as electric motors, generators, magnetic storage devices, and compasses. Magnets can be either natural, such as lodestone, or artificial, such as magnets made from iron, nickel, cobalt, or other magnetic materials.
To know more about magnet visit :
https://brainly.com/question/2841288
#SPJ1
A particle ( m = 8mu*g . q = 6nC ) has a speed of 0m / s at point A and moves to point B where the electric potential is 2.0 kV greater than at point A. What is the particle's kinetic energy at point B? Only electric forces act on the particle during this motion.
Calculate the acceleration of a racecar driver who can accelerate from 0 m/s to 90 m/s in 3 seconds.
Answer:30m/s square
Explanation: V-VO = V
T T
\overline{a} = average acceleration
v = final velocity
v_0 = starting velocity
t = elapsed time
=90-0 =30m/s square
3
If the earth revolve around the sun, why we see the same stars every night in the same position.?
The stars are not fixed but they are just constantly moving. We see them in the same position every night because they seem to be very small to us and also due to the earth's revolution.
If you factor out the daily motion of the stars across the sky due to the earth's rotation, you end up with a pattern of stars that seems to never change. The stars seem so fixed that ancient sky-gazers mentally connected the stars into figures called constellations that we can still make out today. But in reality, the stars are constantly moving every time. They are just so far away that the eye without any instrument cannot see their movement. But sensitive instruments can detect their movement.