Balance the following equation:ZnO(s)⟶ΔZn(l)+O2(g) Express your answer as a chemical equation. Identify all of the phases in your answer.

Based on the atomic number of the given elements, the atoms that have the greatest nuclear charge is ¹⁴₇N; option A.

The nuclear charge in atoms is the charge in the nucleus due to the presence of the positively-charged protons present in the nucleus of an atom.

The nuclear charge of atoms increases with an increase in the atomic number of the elements.

Hence, for elements in the period table, the size of the nuclear charge increases both down the group and across a period from left to right.

Learn more about the nuclear charge at: https://brainly.com/question/15874485

#SPJ1

Answer:

All atoms of a specific element are identical in mass, size, and other properties. However, atoms of different element exhibit different properties and vary in mass and size. Atoms can neither be created nor destroyed. Furthermore, atoms cannot be divided into smaller particles.

Answer

Explanation

Given:

[KOH] = 0.01 M

What to find:

The hydroxyl concentration, [OH⁻¹].

Step-by-step solution:

pH or pOH is the measure of acidity or alkalinity of a solution.

Acids have pH ranging from 1 to 6.9 and bases have pH ranging from 7.1 to 14. Neutral substances have a pH of 7.

The dissociation of KOH in aqueous medium is:T

answer and explanation

we are given initial values of temperature, pressure and volume as well as the final value of temperature and pressure and we are asked to find the final volume.

we can do this using the combined gas equation

P1V1/T1 = P2V2/T2

when we plug in the values we get:

(6atm x78L)/53K = (85atm x V2/17K

8.83 = 85atm x V2 / 17K

V2 = 1.77 Liters

Was a bit lengthy but I guess you do it like this?

• The bond that exist between the CCl4 compound ,forms a covalent bond ,, this can be illustrated in the diagram below:

• We can see that it contains four non-polar covalent bond between carbon and chloride

The existence of isotopy shows that the atoms of the same element are not exactly alike.

Recall that the atom is the simplest particle of a substances that is able to take part in a chemical reaction. Note that the empirical study of the atom became much more common after the study of John Dalton that led to the Dalton Atomic Theory.

Now, one of the postulates of the theory is the atoms of the same elements are exactly alike in all respects and are different from the atoms of other elements. The existence of isotopy have shown that the atoms of the same element could be different and behave slightly differently from each other.

Learn more about isotopy:https://brainly.com/question/27475737

#SPJ1

The correct answerwer is option D.

D)The artificial cell will become more turgid.

What is a cell?

The cell is the basic building block of all living things. The human body contains many cells and they provide structure for the body. They take in nutrients from the food and convert them to energy for the body. they also carry out specialized functions.

Artificial cells are engineered particles that look like natural biological cells. example proteins, genes, enzymes, etc

Flaccid cells are shrunken cells while turgid cells are stretched due to the absorption of water.

Learn more cells on

brainly.com/questions/17523466

#SPJ1

PO₄ appears in two different places in this chemical equation. PO₃⁻⁴ is a polyatomic ion called phosphate. 2 should be placed in front of Na₃PO₄ to give the same total number of phosphate ions on each side of the equation.

For the reaction -

? Na₃PO₄ + MgCl₂  →  Mg₃(PO₄)₂ + NaCl

There are 2 phosphate ions present on the product side, therefore, 2 phosphate atoms should be present on the reactant side to maintain the equilibrium.

On product side, number of ions of magnesium is 3, so to attain the equilibrium and balance the equation there 3 ions of magnesium should be on the reactant side.

In order to balance the number of ions of phosphate and magnesium in the reaction which is given -

On the reactant side, 6 atoms of chlorine and sodium are formed, in order to balance these 6 atoms of chlorine and sodium, 6 atoms of each should be present on the product side.

Therefore, the balanced chemical equation is -

2 Na₃PO₄ + 3 MgCl₂  →  Mg₃(PO₄)₂ + 6 NaCl

To learn more about chemical equation,

brainly.com/question/12946825

#SPJ1

answer and explanation

a bronsted-lowry basic is a H+ donor

In order to solve this question we need to set up the properly balanced equation first:

CaCO3 + 2 HCl -> CaCl2 + H2O + CO2

Now that our reaction is properly balanced, we have to find the limiting reactant in order to find how much mass of CaCl2 will be produced

We have:

10.0 g of CaCO3, molar mass = 100.086 g/mol

15.0 g of HCl, molar mass = 36.46 g/mol

Now we need to find the number of moles of the reactants, and see if the amount available of the other reactant is the one needed to react.

CaCO3:

100.086g = 1 mol

10g = x moles

x = 0.099 moles of CaCO3

According to the molar ratio, the CaCO3 and HCl will have a relationship in which we will always need 2 times more HCl than CaCO3, therefore if we have 0.099 moles of CaCO3, we will need 0.198 moles of HCl in order to proceed with the reaction, but we don't know if that is the right amount, let's check:

HCl:

36.46g = 1 mol

15.0g = x moles

x = 0.411 moles of HCl, this means that we have an excess of HCl, since we only need 0.198 moles in order to react with CaCO3. Therefore Calcium carbonate is the limiting reactant.

Now that we know which one is the limiting reactant, we can find the mass produced of CaCl2.

Again the molar ratio is important here, but know, we will always have the same number of moles for CaCO3 and CaCl2, 1:1 will be the molar ratio, therefore if we have 0.099 moles of CaCO3, we will also have 0.099 moles of CaCl2, using its molar mass, 110.978g/mol, we can find the final mass

CaCl2:

110.978g = 1 mol

x grams = 0.099 moles

x = 11.0 grams (it is actually 10.986 grams, but I have rounded up to 11 grams)

If the mercury in a barometer raises 22.8 centimeters due to a change in ambient pressure, then the corresponding change in pressure would be 0.3 atm.

The total applied force per unit of area is known as the pressure.

The pressure depends both on externally applied force as well the area on which it is applied

As given in the problem If the mercury in a barometer raises 22.8 centimeters due to a change in ambient pressure, then we have to find out the corresponding change in pressure in atm,

760 mm of Hg = 1 atm

76 cm of Hg = 1 atm

1 cm of Hg = 1 / 76 atm

22.8 cm of Hg = 22.8 / 76 atm

                        = 0.3 atm

Thus ,  the corresponding change in pressure in atm would be 0.3 atm .

To learn more about pressure,refer to the link ;

brainly.com/question/28012687

#SPJ1

Answer and explanation

To predict the product, you need to first have or know your reactans, for example, if you have magnesium (Mg) + oxygen (O2), the product should include both reactants. Oxidation numbers also play a role of the final charge of the product, magnesium has a charge of 2+ and O has a charge of 2-, therefore the product will be MgO

Example 2

Na2CO3 + HCl

When sodium carbonate (Na2CO3) reacts with HCl, Na+, O^-2 and CO2 dissociates in the solution, H+ and Cl- also dissociates, what happens is that the oppositely charges ions attract and form compounds, Na is positive and Cl is negative, they will combine to form NaCl, the hydrogen has a positive charge (+1), it will combine with excess oxygen (O^-2) forming water (H2O) and the CO2 will not combine with anything since it is not an ion

Final equation:

Na2CO3 + HCl = NaCl + H2O + CO2

Now we can balance the equation:

Na2CO3 + 2HCl = 2NaCl + H2O + CO2

The carbonate ion has the simplest oxo carbon anion structure. One carbon atom is surrounded by three oxygen atoms in a trigonal planar arrangement, giving it D3h molecular symmetry. Its molecular mass is 60.01 g/ mol and its formal charge overall is HCO3.

Carbonate Organization its structure is a trigonal planar arrangement of three oxygen atoms surrounding a carbon atom. Two single bonds to the negative oxygen atom and two double bonds to the neutral oxygen atom make up the carbonate ion's Lewis structure.

The carbonate ion, a salt of carbonic acid, is the most basic form of the oxo carbon anion. A polyatomic ion, it has the chemical formula CO32-. The term "carbonate" can also refer to a carbonate ester, an organic molecule with the carbonate group C(=O)(O-)2.

The carbonate has a valency of two because it may combine with two hydrogen atoms.

To learn more about structure of carbonate ion refer to:

https://brainly.com/question/4680313

#SPJ13

The pH of a 0.670 M solution of Ca(NO₂)₂ is 1.76

When HNO₂ dissociates, it forms H⁺ and NO₂⁻ ions.

HNO₂ ==> H⁺ + NO₂⁻

Ka of HNO₂ = [H⁺] [NO₂⁻] / [HNO₂] = 4.5× 10⁻⁴

Let’s take x for unknown

4.5 x 10⁻⁴ = (x)(x) / 0.670

4.5 x 10⁻⁴ = x² / 0.670

x² = 3.015 x 10⁻⁴

x = 1.74 x 10⁻²

[H⁺] = 1.74 x 10⁻² M

pH is the measurement of the acidity or basicity of a compound. It ranges from  0 to 14

Therefore, the pH of a 0.670 M solution of Ca(NO₂)₂ is

pH = -log [H⁺]

pH = -log 1.74 x 10⁻²

pH = 1.76

The pH of a 0.670 M solution of Ca(NO₂)₂ is 1.76 which lies in the acidic range (0 to 7)

To know more about pH

https://brainly.com/question/2288405

#SPJ1

In calculating the theoretical yield of ammonia, the 6/3 done in the second step is to convert moles of hydrogen to moles of ammonia since the mole ratio of hydrogen to ammonia is 3 : 2.

The theoretical yield of a reaction is the maximum amount of product that can be obtained from a given reaction based on the equation of the reaction.

The theoretical yield of a reaction is obtained from the mole ratio of the limiting reagent and the product of the reaction.

Considering the given reaction whose reaction equation is given below:

N₂ (g) + 3 H₂ (g) ---> 2 NH₃ (g)

Hydrogen is given as the limiting reagent:

The amount of hydrogen present 12 g

Moles of hydrogen = 12 g/ 2 g/mol = 6 moles

Mole ratio of ammonia to hydrogen = 3 : 2

Moles of ammonia produced = moles of hydrogen * mole ratio of ammoia to hydrogen

Moles of ammonia = 6 moles * 2/3 moles = 4 moles

Mass of ammonia produced = 4 moles * 17 g/mol

Mass of ammonia produced = 68 g

Learn more about mole ratio at: https://brainly.com/question/19099163

#SPJ1

Given the hypothetical thermochemical equation, expressed as:

We are to find the enthalpy change (ΔH ) for the reaction 2C → 3 A + B.

• You can see that the, given reaction, 2C → 3 A + B is the, reverse ,of the thermochemical equation 3 A + B → 2 C.

• Since the ,reverse reaction is possible,, the reaction enthalpy has the ,same numerical value, but with the, ,opposite sign

Therefore, the enthalpy change ∆H, in kJ/mol, be for the reaction 2 C → 3 A + B is -65.5kJ/mol

Explanation:

Aluminum will react with chlorine gas according to the following reaction:

2 Al (s) + 3 Cl₂ (g) ----> 2 AlCl₃

We have to find the mass of Cl₂ that will completely react with 13.5 g of Al. First we have to convert the mass of Al to moles using its molar mass.

molar mass of Al = 26.98 g/mol

moles of Al = 13.5 g * 1 mol/(26.98 g)

moles of Al = 0.500 mol

2 Al (s) + 3 Cl₂ (g) ----> 2 AlCl₃

Now, according to the coefficients of the reaction, 2 moles of Al will react with 3 moles of Cl₂. So the molar ratio between them is 2 to 3. We can use that relationship to find the number of Cl₂ that will react with 0.500 mol of Al.

2 mol of Al : 3 moles of Cl₂ molar ratio

moles of Cl₂ = 0.500 mol of Al * 3 moles of Cl₂/(2 moles of Al)

moles of Cl₂ = 0.750 mol

And finally we can convert back to grams using the molar mass of Cl₂.

molar mass of Cl₂ = 70.91 g/mol

mass of Cl₂ = 0.750 moles * 70.91 g/(1 mol)

mass of Cl₂ = 53.2 g

Answer: a. 53.2 g of Cl₂ for complete reaction.

Of the options given, the correct one for the Lewis structure of CO₂ is option A.  

In the covalent structure of CO₂, each atom will tend to have 8 electrons on its side, in order to comply with the octet rule. In this rule, an atom that has 8 electrons in its valence shell, will gain stability for having a noble gas electronic configuration.      

Hence, the correct lewis structure for CO₂ is option A. In this configuration, each atom has 8 electrons on its side and all of them are neutral (the total charge of the molecule is zero). They all achieve the octet rule.    

Although in option B all the atoms have 8 electrons (thus complying with the octet rule), in this configuration the oxygen atom on the left has a negative charge (-1) and the oxygen on the right side has a positive charge (+1). The total charge on the molecule is zero (it is neutral). In fact, this is a resonance structure of configuration A.    

In option C, the total charge of the molecule is -2, so this is not a stable configuration. The number of electrons on carbon is wrong.  

Finally, in option D the oxygen on the right side does not achieve the octet rule (it only has 6 electrons shared), and also the carbon atom has a charge of -2, and the oxygens have charges of -1 (left) and +3 (right), so this is not a stable configuration.  

Therefore, the correct lewis structure for CO₂ is option A.

In simple terms a covalent bond is when we have sharing of electrons, which means there is no polarity being formed when the elements are bonded, this is more likely to occur with atoms with high electronegativity, or same pair of elements, like O2, where we have O - O (Oxygen bonded with Oxygen), since they have the same electronegativity, there is no charge being formed

The same can not be told for ionic bonds, where we have very different elements being bonded together, with a big electronegativity difference, which means we have polarity being formed (which basically means that we have charge in the compound)

One way to find out if a compound is covalent or ionic is by checking their positions in the periodic table, for example, let's analyze our question

We have:

A) Fluorine - Fluorine, here we have a classical example of covalent bond, since there is no "stronger" element, pulling the electrons towards its side, they are the same, hence, the same strength

B) Carbon - Chlorine, we have two non-metals, with a relatively high electronegativity each one of them, so there is ions being formed, therefore it is covalent

C) Potassium - Oxygen, in this case we have a metal and non-metal bonding together, and since potassium has only 1 electron in its valence shell, it will easily give up this electron to another element, therefore K will receive a positive charge (which means loss of electron) and oxygen will receive a negative charge (which means gain of electron), and this is an ionic bond

D) Oxygen - nitrogen is the same case as letter B

It is also possible to check an electronegativity table, in which there are some rules that helps you understand if a compound is more likely to be covalent or ionic

Density relates the mass of a compound to its volume. We will first find the mass of the solution using the density and volume given. We have the following equation:

We clear the mass,

So, the mass of paint is 13950 g. Now the mass percentage of the lead in the paint will be calculated as follows:

The mass percentage of lead in the paint is 0.24%.

ppm concentration means the quantity of solute in milligrams (mg) is in a liter (L) of a solution. So, to calculate ppm concentration we will divide the milligrams of lead (II) nitride between the liters of paint:

The ppm of lead in the paint is 11033ppm.

A quasar is a star that emits intense radio and light energy.

A quasar is an extremely bright radio source. It is called a quasi-stellar radio source. It appears to be like a star but is not a star. These quasars are young galaxies that are located far away from us and are highly luminous. The luminosity of a quasar is 1000 times greater than the luminosity of a milky way galaxy.

A quasar is powered by a supermassive black hole with its mass ranging from millions to tens of billions of solar masses, surrounded by a gaseous accretion disc.

The quasars were first discovered in the 1950s using the Hubble space telescope and were found to be a massive bright source emitting radio waves of unknown origin. But now, millions of quasars were discovered.

To know more about stars, click below:

https://brainly.com/question/1041175

#SPJ1

Explanation:

An electrolyte has to be capable of of ionizing and CH40 is not.

Therefore, CH40 is not an electrolyte.

Answer:

False

The final pressure of the gas when the sample gas is administered to a new volume of 10.0 L at 20.2℃ would be 0.245 atm.

The problem here has to do with the combined gas law. The law is mathematically expressed as:

[tex]p_1v_1/t_1[/tex] =[tex]p_2v_2/t_2[/tex]

Where [tex]p_1[/tex] = initial pressure, [tex]v_1[/tex] = initial volume, [tex]t_1[/tex] = initial temperature, [tex]p_2[/tex] = final pressure, [tex]v_2[/tex] = final volume, and [tex]t_2[/tex] = final temperature.

In this case,

Rearranging the combined gas equation:

[tex]p_2[/tex] = [tex]p_1v_1t_2/t_1v_2[/tex]

Substituting the different variables:

[tex]p_2[/tex] = 1.2 x 6.02 x 20.2/59.5 x 10.0

      = 145.9248/595

      = 0.245 atm

Thus, the final pressure of the sample gas will be 0.245 atm.

More on combined gas law can be found here: https://brainly.com/question/13154969

#SPJ1

Answer

The pressure of the sample is 1.47 atm

Explanation

Given:

Moles, n = 1.31 mol

Volume, V = 24.6 L

Temperature, T = 336 K

The ideal gas constant, R = 0.0821 L*atm/mol*K

What to find:

Pressure, P of the sample.

Step-by-step solution:

Pressure, P of the sample can be calculated using the ideal gas equation.

Put the values of the parameters into the formula, we have;

The pressure of the sample is 1.47 atm

We have to find the molarity of a solution of Magnesium Fluoride. The definition of molarity is:

Molarity = moles of solute/Volume of solution in L

Our solute is MgF₂:

Molarity = moles of MgF₂ / L of solution

From the problem we know that the volume of the solution that the chemist prepared is 250. mL, we will have to convert that into L.

We know that there are 1000 mL in 1 L. So:

1 L = 1000 mL

250. mL = 250. mL * 1 L/1000 mL = 0.250 L

Volume of solution in L = 0.250 L

Now we have to find the number of moles of MgF₂ that the chemist added. From the problem we know the mass of MgF₂ added. Let's convert it to g:

1000 mg = 1 g

mass of MgF₂ = 6-73 mg

6.73 mg = 6.73 mg * 1 g/1000 mg = 0.00673 g

mass of MgF₂ = 0.00673 g

When we want to find the number of moles that we ave in a certain amount of a compound, we have to use the molar mass. Let's find the molar mass of MgF₂.

According to the periodic table the atomic mass of Mg is 24.3 amu and the atomic mass of F is 19 amu. So the molar mass of MgF₂ is:

molar mass of MgF₂ = 24.3 + 2 * 19 = 62.3 g/mol

molar mass of MgF₂ = 62.3 g/mol

Using the molar mass we can find the number of moles that we have in 6.73 mg or 0.00673 g of MgF₂:

moles of MgF₂ = 0.00673 g/(62.3 g/mol)

moles of MgF₂ = 1.08 * 10^-4 moles

So the chemist added 1.08 * 10^-4 moles of MgF₂ in 0.250 L of solution. Then the molarity of the solution is:

Molarity = moles of solute/Volume of solution in L

Molarity = 1.08 * 10^-4 moles/0.250 L

Molarity = 4.32 * 10^-4 M

So the answer to our problem is 4.32 * 10^-4 M

a) Electronegativity has to do with the fact that electrons are unequally shared in a bond

b) The electronegative tom would receive electrons in an ionic bond.

The term electronegativity has to do with the fact that in some atoms, the electron cloud could be closer to them in a covalent bonding situation than to the other atom. You need to recall that in a covalent bond, the electron pair of the bond is shared and the electron cloud is expected to be equidistant between the nuclei of the two atoms that are bonding.

In a case where the electron cloud seems to be closer to one atom than the other then the other atom is said to be highly electronegative. We also need to knw that in an ionic bond, there is a transfer of electrons from one atom to the other.

If one of the bonding atoms in an ionic bond is highly electronegative, it then follows that electrons would be transferred to that atom in the process of ionic bonding.

Learn more about ionic bonding:https://brainly.com/question/11527546

#SPJ1

According to the explanation given in the previous session, now we have hexane in an organic compound with the solubility of 0.520 g/mL at 25°C. We need to find the value of volume at 120.0 mg

1 gram = 1000 mg

120.0 mg = 0.12 grams

Now we can calculate the volume:

0.520g = 1 mL

0.12g = x mL

0.520x = 0.12

x = 0.12/0.520

x = 0.231 mL is the volume for this compound

Thermal energy in a circuit comes from the electrical energy that is transformed into heat. It is observed in resistors, capacitances and inductances.

The electrical energy in a circuit is converted into heat by the thermal energy. It relies on the sort of circuit under evaluation, which in turn depends on the circuit's components. These elements include resistors, capacitances, and inductances—individually or in combination.

The sum of the squares of the current, resistance, and power dissipated. The impedance of the circuit must be computed for an LCR circuit. then utilizing the impedance, the circuit's current may be estimated.

P=V^2/R

Hence, the thermal energy in a circuit is observed in resistors, capacitances and inductances.

To learn more about Thermal energy, click on the given link:
https://brainly.com/question/19666326
#SPJ13

The sum of coefficients when the above-mentioned equation is balanced is 12.

A chemical equation is a symbolic representation of a chemical reaction where reactants are represented on the left, and products on the right.

A chemical equation is said to be balanced when the number of atoms of each element on both sides of the equation is the same.

According to this question, calcium hydroxide reacts with phosphoric acid as follows:

3Ca(OH)₂ + 2H₃PO4 → Ca₃(PO4)₂ + 6H₂O

The sum of the coefficients of the above balanced chemical equation is 3 + 2 + 1 + 6 = 12.

Learn more about coefficients at: https://brainly.com/question/28294176

#SPJ1