a) The percentage of pregnancies should last between 269 and 282 days is 18%
b) The days should the longest 10% of all pregnancies last is 291 days.
c) According to the Central Limit Theorem, the distribution of this sample mean is 265. The model is a Normal model, and standard deviation is 17/(√(67)).
d) The probability that the mean duration of these patients' pregnancies will be less than 258 days is 0.03 or 3%
How do we determine the values?a) To find the percentage of pregnancies that should last between 269 and 282 days, we need to find the proportion of the area under the normal distribution curve that falls between those two values. This can be done using a standard normal table or calculator. Using a calculator, we find that the proportion of the area under the curve between 269 and 282 days is approximately 0.18 (or 18%).
b) To find the longest 10% of all pregnancies, we need to find the duration that corresponds to the 90th percentile. We can use the standard normal table or calculator to find that the duration that corresponds to the 90th percentile is approximately 291 days.
c) According to the Central Limit Theorem, the distribution of the sample mean, y, is a normal distribution with a mean of 265 days (the population mean) and a standard deviation of 17/(√(67)) days. So the model is a Normal model with mean 265 and standard deviation 17/(√(67))
d) To find the probability that the mean duration of these patients' pregnancies will be less than 258 days, we need to find the proportion of the area under the normal distribution curve that falls to the left of 258 days. Using a calculator, we can find that the proportion of the area under the curve to the left of 258 days is approximately 0.03 (or 3%).
Therefore, the correct answers are as given above
learn more about central limit theorem: https://brainly.com/question/17092136
#SPJ1
Write y=1/2x +8 in standard form using integers
Work Shown:
y = (1/2)x+8
2y = 2*( (1/2)x+8 )
2y = x + 16
2y - 16= x
-16= x-2y
x-2y = -16
Side note: I multiplied both sides by 2 in the second step to clear out the fraction.
The answer x-2y = -16 is in standard form Ax+By = C
A = 1, B = -2, C = -16
solve this system of equations by using the elimination method.
2x+4y=8 2x+3y=4
Hey there!
Solution:Point Form: [tex](-4,4)[/tex]Equation Form: [tex]x=-4,y=4[/tex]
Hope this helps!
The population of a small town increased from 25,056 people in 2002 36,720 in 2010 what is the percentage change in the population
well, we know in 2002 it was 25,056, then it ballooned to 36,720 in 2010, the difference is really 36720-25056 = 11664.
now, if we take 25,056(origin amount) to be the 100%, what's 11664 off of it in percentage?
[tex]\begin{array}{ccll} amount&\%\\ \cline{1-2} 25056 & 100\\ 11664& x \end{array} \implies \cfrac{25056}{11664}~~=~~\cfrac{100}{x} \\\\\\ \cfrac{ 58 }{ 27 } ~~=~~ \cfrac{ 100 }{ x }\implies 58x=2700\implies x=\cfrac{2700}{58} \implies x\approx \stackrel{\%}{46.55}[/tex]
Y=-2x-4 y=1/2x +6 what is the solution of the system of equation
Answer:
Step-by-step explanation:
If log5 125 = x, then x =
Answer:
X=3
Step-by-step explanation:
If you enter log5(125)= x into your calculator that should be your answer
write the abbreviation for each of the following: match the words in the left column to the appropriate blanks in the sentences on the right. make certain each sentence is complete before submitting your answer.
1. The abbreviation for femtogram is - fg.
2. The abbreviation for decimeters is - dm.
3. The abbreviation for microliter is - μL or ul.
4. The abbreviation for femtosecond is - fs.
1. Femtogram (fg): A unit of mass measurement in the International System of Units (SI). It is equal to [tex]10^{-15}[/tex] grams and is commonly used to measure the mass of small particles or atoms.
2. Decimeter (dm): A unit of length measurement in the International System of Units (SI). It is equal to 0.1 meters and is commonly used to measure small distances.
3. Microliter (μL or ul): A unit of volume measurement in the International System of Units (SI). It is equal to [tex]10^{-6}[/tex] liters and is commonly used to measure very small volumes of liquids.
4. Femtosecond (fs): A unit of time measurement in the International System of Units (SI). It is equal to [tex]10^{-15}[/tex] seconds and is commonly used to measure very short periods of time, such as in atomic and molecular physics, chemistry, and photonics.
Read more about Units:
brainly.com/question/141163
#SPJ4
The complete question is -
write the abbreviation for each of the following: match the words in the left column to the appropriate blanks in the sentences on the right. make certain each sentence is complete before submitting your answer.
1. The abbreviation for femtogram is -
2. The abbreviation for decimeter is -
3. The abbreviation for microliter is -
4. The abbreviation for femtosecond is -
P= a+b+c
solve for b
Answer:
[tex]b = P - a - c[/tex]
Step-by-step explanation:
Notice that there are 3 terms on the right hand side. You want to isolate b in order to solve for it.
I find it less confusing to place term containing the variable you want on the left hand side. (As long as it is positive).
[tex]a + b + c = P[/tex]
To isolate b subtract a and c from both sides
[tex]b = P -a - c[/tex]
Find the slope of the line described in the table. (Please help)
Answer:
-1/2
Step-by-step explanation:
use any difference in Y
divided by the difference in X.
ΔY = 3-2 = 1
ΔX=-4-(-2)=-2
1/(-2) = slope
List all real values of xx such that f(x)=0. If there are no such real x, type none in the answer blank. If there is more that one real xx, give a comma separated list (e.g. 1,2).
f(x)=19x2+10x
x =
The all the real values of x , such that for the function f(x) = 19x² + 10x satisfies f(x) = 0 are 0 , -10/19 .
The function is ⇒ f(x) = 19x² + 10x ;
taking x common from both terms and writing it in factor form ,
we get ;
⇒ x(19x + 10) = 0 ;
we know that the product of any two number is zero only when one of them is 0 ,
that means ;
⇒ x = 0 or 19x + 10 = 0 ;
⇒ x = 0 or 19x = -10 ;
⇒ x = 0 or x = -10/19 .
Therefore , all the real values of x such that f(x) = 0 are 0 , -10/19 .
The given question is incomplete , the complete question is
List all real values of x such that the function f(x)=0. If there are no such real x, type none in the answer blank. If there is more that one real x, give a comma separated list (e.g. 1,2).
f(x) = 19x² + 10x .
Learn more about Functions here
https://brainly.com/question/29159787
#SPJ4
Which is the area, A
A
, of this triangle, using the formula A=12ab⋅sin(C)
A
=
1
2
a
b
·
sin
C
?
The area of triangle, using the formula A is 146.9 in^2
How to find a area of triangle using trigonometry?Trigonometry is a branch of mathematics that deals with the relationships between the angles and sides of triangles. It can be used to calculate the area of a triangle by using the length of its sides.
The most commonly used formula to calculate the area of a triangle is known as Heron's formula. This formula uses the lengths of the triangle's three sides, known as a, b, and c. Then use the formula A = 1/2 x[tex]\sqrt{(a + b+ c)(-a + b + c)(a - b + c)(a + b -c)}[/tex] to calculate the area of the triangle.
To calculate the area of a triangle using Heron's formula, first measure the length of each side of the triangle. Then use the lengths of the sides to calculate s using the formula above. Once you have calculated s, plug the values for a, b, and c into Heron's formula to calculate the area of the triangle.
A = 1/2ab⋅sin(C)
= 1/2(21 in. )(14 in.)⋅sin(88)
= 1/2(294 in.2 )⋅sin(88)
= 1/2(294 in.2 )⋅0.9945
A = 146.9 [tex]in^{2}[/tex]
To learn more about area of triangle, visit
brainly.com/question/17335144
#SPJ1
Find an equation for the line below.
Answer: - 4/5x + 1.8
Step-by-step explanation:
"-": because the slope is negative
"4/5": because its the slope
"x": because it is part of 'mx + b'
"1.8": because it's the y-intercept that fits this equation
Answer:
y = -4/5x + 1.8
Step-by-step explanation:
1st find the slope, m, using these 2 points: (-4,5) and (6,-3)
m = (-3-5) / (6--4) = -8/10 = -4/5
Now use the point (-4, 5) in the the point-slope form to find b:
y - 5 = -4/5(x - -4)
y - 5 = -4/5(x + 4)
y - 5 = -4/5x - 16/5
y = -4/5x -16/5 + 25/5 = -4/5x + 9/5
Now write the equation in slope-intercept form:
y = -4/5x + 1.8
what does the equation y=x^2 represent as a curve in R^2
The equation y = x² represents a parabola as a curve
What is Equation?Two or more expressions with an Equal sign is called as Equation.
The equation y = x² represents a parabola as a curve
The equation is given as:
y = x²
The above equation has a degree of 2
Polynomials that have a degree of 2 are referred to as quadratic equations
The curve of a quadratic equations are called parabola
Hence, the equation y = x² represents a parabola as a curve
Read more about parabola at:
brainly.com/question/4061870
#SPJ1
please help with math
Answer:-3
Step-by-step explanation:
The y-intercept is where the line crosses the y-axis so in this case it is -3.
what is the inequality for 3<-5n+2n
Answer:
n< -1
Step-by-step explanation:
1. Rewrite so n is on the left side of the inequality.
−5n+2n>3
2.Add 5n and 2n
-3n >3
3. Divide each term then simplify.
15. Reasoning The Annual Mug Race is the
longest river sailboat race in the world. The
event is run along the St. Johns River, which
is 310 miles long. About how many times as
long as the race is the river?
Using expression {River=x(race)} River's length is 7.38 times the race's length, approximately.
What are expressions?
Expressions in math are mathematical statements that have a minimum of two terms containing numbers or variables, or both, connected by an operator in between. The mathematical operators can be of addition, subtraction, multiplication, or division. For example, x + y is an expression, where x and y are terms having an addition operator in between. In math, there are two types of expressions, numerical expressions - that contain only numbers; and algebraic expressions- that contain both numbers and variables.
e.g. A number is 6 more than half the other number, and the other number is x. This statement is written as x/2 + 6 in a mathematical expression. Mathematical expressions are used to solve complicated puzzles.
We know that
The river is 310 miles long.
The race is 42 miles long.
So, if we want to know know how many times as long as the race is the river, we just need to use this expression
River=x(race)
Where x represents the factor that expresses the ratio between both, solving for x we have
x=river/race=310/42≈7.38
Therefore,
River's length is 7.38 times the race's length, approximately.
To know more about expressions visit the link
https://brainly.com/question/13947055?referrer=searchResults
#SPJ1
Right question:-
The Annual Mug Race 42 mile is the
longest river sailboat race in the world. The
event is run along the St. Johns River, which
is 310 miles long. About how many times as
long as the race is the river?
integrate both sides of the differential equation you found for dp to obtain an equation for p . your equation should then include a constant that depends on initial conditions. determine the value of this constant by assuming that the pressure at some reference height y0 is p0 .
The value of this constant, by assuming that the pressure at some reference height y₀ is p₀, is p - p₀ = p.g(y₀ - y).
dp = -pg dy
At height y = y₀ and p = p₀
∫dp = ∫-pg dy
⇒p = -pgy + C Eqn(1)
Where c is the constant of integration
We know that y = y₀ and p = p₀
⇒p₀ = -pgy₀ + C
⇒C = p₀ + pgy₀
Put the value of C in Eqn(1)
⇒p = -pgy + p₀ + pgy₀
⇒p - p₀ = -pgy + pgy₀
⇒p - p₀ = pg(y₀ - y)
To know more about pressure, here
https://brainly.com/question/30244346
#SPJ4
A bag contains 6 red marbles and 4 blue marbles. If two marbles are drawn at random and not replaced, what is the probability that two red marbles are drawn?
If two marbles are drawn at random and not replaced, the probability that two red marbles are drawn is; 1/3
What is the probability of selection?The parameters given for marbles in the bag are;
Number of red marbles = 6
Number of blue marbles = 4
Thus;
Total number of marbles = 6 + 4
Total number of marbles = 10 marbles
Now, probability of first selection being red marble = 6/10
Probability of second marble being red if first was not replaced = 5/9
Thus;
P(first two being red marbles) = (6/10) * (5/9)
= 1/3
Read more about Probability of selection at; https://brainly.com/question/251701
#SPJ1
The ball thrown upwards hit the roof and returns back to the ground.The upward moment is given with : s= -t2+3t+4
and downward :s= - 2t2+t+7
How high is the roof from the ground ?
The height of the roof will be 10.75 units.
What are algebraic expressions?In mathematics, an expression or mathematical expression is a finite combination of symbols that is well-formed according to rules that depend on the context.Mathematical symbols can designate numbers (constants), variables, operations, functions, brackets, punctuation, and grouping to help determine order of operations and other aspects of logical syntax.Given is to find the height of the roof.
The upward motion is modelled by the equation -
S = - t² + 3t + 4
The height of the roof is equal to maximum height attained. For the maximum height attained -
dS/dt = 0
d/dt (- t² + 3t + 4) = 0
- 2t + 3 = 0
2t = 3
t = 3/2 .... Eq(1)
The height of the roof will be -
S(max) = - t² + 3t + 4
S(3/2) = - (3/2)² +(3 x 3/2) + 4
S(3/2) = 9/4 + 9/2 + 4
S(3/2) = 2.25 + 4.5 + 4
S(3/2) = 10.75 units.
Therefore, the height of the roof will be 10.75 units.
To solve more questions on algebraic expressions, visit the link below -
brainly.com/question/1041084
#SPJ1
Briefly explain the three lines of evidence for the Earth's relative age. Write your answer in the essay box below.
WILL GIVE BRAINLIEST
Answer:
There are several lines of evidence that scientists use to determine the relative age of the Earth and its various features. These include:
Stratigraphy: This refers to the study of rock layers and the sequence in which they were formed. Scientists use stratigraphy to determine the relative ages of different rock layers and the fossils they contain. The principle of superposition states that in any undisturbed sequence of rocks, the oldest rock layers will be at the bottom and the youngest will be at the top.
Fossil record: Fossils are the remains of plants and animals that lived in the past. By studying the fossils in rock layers, scientists can determine the relative ages of different rock formations and the organisms that lived in them. Fossils of extinct species found in lower rock layers are older than those found in higher rock layers.
Radiometric dating: This is a method that uses the decay of radioactive isotopes in minerals to determine the absolute age of rocks and minerals. Scientists can use radiometric dating to determine the age of a rock or mineral, and by comparing the ages of different rocks and minerals, they can determine the relative ages of different rock formations and the Earth's surface features.
In a wind tunnel experiment; the force on a projectile due to air resistance was measured at different velocities: Velocity (100 ftlsec) 0 2 4 6 8 10Force (100 Ib) 0 2.8 14 38. 74.4 128Find an interpolating polynomial for these data It is highly recommended that you use software or a calculator. F(v) = ____ Use the polynomial to estimate the force on the projectile when it is traveling at 750 ftlsec:
The estimated force on the projectile when it is traveling at 750 ft/sec is approximately 696.7 lbs.
The Possible Interpolating PolynomialOne possible interpolating polynomial for these data points is a polynomial of degree 3, also known as a cubic polynomial. Using software or a calculator to fit a cubic polynomial to the data points, the resulting equation is:
F(v) = -0.00000016v³ + 0.0004v² - 0.08v + 0.4
To estimate the force on the projectile when it is traveling at 750 ft/sec, we can substitute 750 for v in the equation above:
F(750) = -0.00000016(750³) + 0.0004(750²) - 0.08(750) + 0.4
F(750) ≈ 696.7
The estimated force on the projectile when it is traveling at 750 ft/sec is approximately 696.7 lbs.
Learn more about The Possible Interpolating Polynomial here:
https://brainly.com/question/13427238
#SPJ4
NO LINKS!!!
Please help me with #53.
Answer:
53
a. Graph of equation attached
b.
Domain:
[tex]-\infty \: < x < \infty \:[/tex]
Interval notation: [tex]\left(-\infty \:,\:\infty \:\right)[/tex]
Range:
[tex]f(x) > 1\\\\[/tex]
Interval notation: [tex]\left(1,\:\infty \:\right)[/tex]
c. See explanation below and on attached graph
d. See explanation below
Step-by-step explanation:
53
The function to be used for answering questions is
[tex]f(x) = 8\left(\dfrac{1}{4}\right)^{x+4}+1[/tex]
a. Graph
Graph is plotted using online graphing tool. 2 points identified are (-4, 9) and (-3, 3)
b. Domain and Range
First let's understand what domain and range are
Definition of domain
The domain of a function, y = f(x), is the set of input(x) values for which the function is real and defined
The function has no undefined points nor domain constraints. You can see that the graph goes to infinity for negative and positive x values Therefore, the domain is :
[tex]-\infty \: < x < \infty \:[/tex]
which can be expressed in interval notation as:
[tex]\left(-\infty \:,\:\infty \:\right)[/tex]
Definition of range
The range of a function y = f(x) is the set of values for y over the domain for which the function is defined
As [tex]x \rightarrow \infty[/tex], [tex]y \rightarrow 1[/tex]
y never quite reaches 0 but its value approaches 1 and therefore the range is
[tex]f(x) > 1\\\\[/tex]
In interval notation:
[tex]\left(1,\:\infty \:\right)[/tex]
c. End Behavior
The end behavior of a function f(x) refers to how the function behaves when the variable x increases or decreases without bound. In other words, the end behavior describes the ultimate trend in the graph of f(x) as [tex]x \rightarrow \pm \infty[/tex]
In this particular function we see that as [tex]x\to \:+\infty \:,\:f\left(x\right)\to \:1\\[/tex]
and as [tex]x\to \:-\infty \:,\:f\left(x\right)\to \:\infty\\[/tex]
d. Point (-3, 3)
By pure chance I chose this point as one of the points asked for in part a because I was looking for integer values I don't think it matters that there is repetition
(-3, 3) is plotted on the graph as point A
3. Evaluate f(-3)
We have
[tex]f(x) = 8\left(\dfrac{1}{4}\right)^{x+4}+1[/tex]
To find f(-3) substitute -3 for x in the above function:
[tex]f(-3) = 8\left(\dfrac{1}{4}\right)^{-3+4}+1\\\\= 8\left(\dfrac{1}{4}\right)^1} + 1\\\\\\= 8\left(\dfrac{1}{4}\right) + 1\\\\= 2 + 1 \\\\= 3[/tex]
So f(-3) = 3
Answer:
a) See attachment 1.
b) Domain: (-∞, ∞)
Range: (1, ∞)
c) As x → -∞, f(x) → ∞
As x → ∞, f(x) → 1⁺
d) See attachment 2.
e) See below.
Step-by-step explanation:
Given exponential function:
[tex]f(x)=8\left(\dfrac{1}{4}\right)^{x+4}+1[/tex]
Part aTo find the y-intercept, input x = 0 and solve for y:
[tex]\implies f(0)=8\left(\dfrac{1}{4}\right)^{0+4}+1[/tex]
[tex]\implies f(0)=8\left(\dfrac{1}{4}\right)^{4}+1[/tex]
[tex]\implies f(0)=8\left(\dfrac{1}{256}\right)+1[/tex]
[tex]\implies f(0)=\dfrac{1}{32}+1[/tex]
[tex]\implies f(0)=\dfrac{33}{32}[/tex]
[tex]\implies f(0)=1.03125[/tex]
Therefore, the y-intercept is (0, 1.03125).
Substitute x = -2 into the function to find a second point on the curve:
[tex]\implies f(-2)=8\left(\dfrac{1}{4}\right)^{-2+4}+1[/tex]
[tex]\implies f(-2)=8\left(\dfrac{1}{4}\right)^{2}+1[/tex]
[tex]\implies f(-2)=8\left(\dfrac{1}{16}\right)+1[/tex]
[tex]\implies f(-2)=\dfrac{1}{2}+1[/tex]
[tex]\implies f(-2)=\dfrac{3}{2}[/tex]
[tex]\implies f(-2)=1.5[/tex]
Therefore, a second point on the curve is (-2, 1.5).
Part bThe domain of a function is the set of all possible input values (x-values).
The domain of the given function is unrestricted:
Interval notation: (-∞, ∞)The range of a function is the set of all possible output values (y-values).
As the exponential part of the function is always positive, the range of the given function is restricted:
Interval notation: (1, ∞)Part cAs x approaches negative infinity, the function approaches positive infinity:
As x → -∞, f(x) → ∞As x approaches positive infinity, the function approaches f(x) = 1.
As x → ∞, f(x) → 1⁺Part dSee attachment 2.
Part eSubstitute x = -3 into the function:
[tex]\implies f(-3)=8\left(\dfrac{1}{4}\right)^{-3+4}+1[/tex]
[tex]\implies f(-3)=8\left(\dfrac{1}{4}\right)^{1}+1[/tex]
[tex]\implies f(-3)=8\left(\dfrac{1}{4}\right)+1[/tex]
[tex]\implies f(-3)=2+1[/tex]
[tex]\implies f(-3)=3[/tex]
Question 16 of 25
Simplify 67 +63
OA. 610
OB. 6-4
O C. 364
O D. 64
The simplification of the given expression after addition = 130.
What is addition?Addition is defined as one of the arithmetic operations that is used for the combination of two of more values.
The given values from the question above;
67 + 63 = 130
Learn more about addition here:
https://brainly.com/question/25421984
#SPJ1
The volume of a rectangular box is 2x(2x + 5)(2x- 3). (Drawing is not to
scale.)
Height 2x - 3
Length 2x + 5
Width 2x
Which statement about the volume of the box is true?
O A. The volume is the product of the length, 2x 5, and the width, 2x.
O B. The volume is the sum of the length, 2x + of 5, the width, 2x, and the
height, 2x - 3
• C. The volume does not depend on the height, 2x - 3.
D. The volume is the product of the area of the base, 2x(2x + 5), and
The volume is the product of the area of the base, 2x(2x+5), and the height, 2x-3.
What is Volume?
A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, as well as several imperial or US-standard units. Volume and the notion of length are connected.
What is Area?
The size of a patch on a surface is determined by its area. Surface area refers to the area of an open surface or the boundary of a three-dimensional object, whereas the area of a plane region or plane area refers to the area of a form or planar lamina.
Given that;
Height= 2x - 3
Length= 2x + 5
Width= 2x
We have the following equation for the rectangular box in this instance:
2x(2x + 5)(2x- 3)
We may come up with an equivalent formula for the volume by using the distributive property of multiplication.
We have then ;
[tex](4x^2+10x)(2x-3)[/tex]
Once more writing, we have:
[tex](8x^3+20x^2)+(-12x^2-30x)[/tex]
Including related terms, we have:
8x^3+8x^2-30x
To learn more about Volume click here:
https://brainly.com/question/24284033
#SPJ1
Please help
Select the correct choices that make the statement true.
Look at image
For the given image, the value of iota (i) is -i and 1.
What does the arithmetic term "iota" mean?
Thus, the development of complex numbers has given rise to imaginary roots. The sign I which stands for Iota, is used to represent -1. (Imaginary number). In essence, I refers to the imaginary component, often known as the iota. I's value is -1. A square root with a negative value represents an imaginary value. Imaginary numbers can be calculated using any of the standard arithmetic operators. An imaginary number has a negative value when squared.
Complex numbers are expressed using the imaginary unit number, where I is defined as imaginary or unit imaginary. Here, we'll go over the chart and principles for imaginary numbers that are employed in mathematical computations.
The value of iota (i²) = -1
The given expressions can be represented in the following way -
i³ = i² × i = -1 × i = -i
i⁸ = i² × i² × i² × i² = -1 × -1 × -1 × -1 = 1
To learn more about iota(i) from given link
https://brainly.com/question/29369374
#SPJ1
The point (-7, 0) is on the graph of the function y = f(x). Which point cannot be on the graph of y=f(x) ?
a. (0,0)
b. (0, -7)
c. (-7, -7)
d. (7, 0)
In the end, the following is an illustration of a point that cannot appear on the graph of y = f(x): (-7, 1).
what is function ?Substances and their modifications, equations and surrounding structures, objects and their placements, and locations where they can be found are all included in the study of mathematics. The relationship between a group of inputs, each of which produces related output, is referred to as a "function." A function is a relationship between both inputs and outputs where each input produces a single, unique result. Every function has a domain and a codomain, often known as a scope. F is typically used to denote functions (x). An x is the input. Based on the following criteria, there are four primary categories of functions that are available: on functions, yet another functions, many-to-one functions, within functions, and on functions.
given
The task's purpose makes it clear that the point on the graph of y = f(x) that cannot be found.
The definition of a function, f(x), states that it is a relation that assigns just one value of y to each value of x.
As a result, the statement above suggests that the x-value -7 can only be given one y-value, which is 0, if the point (-7, 0) is on the graph of the function y = f(x).
In the end, the following is an illustration of a point that cannot appear on the graph of y = f(x): (-7, 1).
To know more about function visit:
https://brainly.com/question/28193995
#SPJ1
Answer:
(-7, -7) you cannot have the same x
example:
The point (6,0) is on the graph of the function y=f(x) . Which point cannot be on the graph of y=f(x)?
(6, 3)
(4,6)
(3,8)
(4,8)
you cannot choose (6, 3)
select the proper inverse operation to check the answer to 14+17=31
Answer:
31-17=14
Step-by-step explanation:
When you reverse it it equals the same answer
Answer:
31-14=17
Step-by-step explanation:
When We Reverse It,Will Be it Self.
b) Five thousand three hundred and forty-five plus eight hundred and six in number
Answer:
I'm not sure if this is what you meant but 5,345 + 806 = 6,151
Step-by-step explanation:
Answer:6151
Step-by-step explanation:
5345 + 806 = 6151
Please help
2 (x- 5) =9 - 3x + 6 + 8 + 3x + 7
Responses
x=10
x-20
x=40
x=80
Answer:
Step-by-step explanation:
2(x-5)=9-3x+6+8+3x+7
2x-10=9-3x+14+3x+7 {Adding the constant no.s +6 and +8}
2x-10=30-3x+3x {Adding all the constants +14 , +7, +9}
2x-10=30-0 {+3x and -3x cancels out}
2x-10=30
2x=30-10 {coefficient with variable i.e 2x on one side}
2x=20 {20 divides by 2 if we bring coefficient 2 to right side}
x=10 Ans
4. Find the area of the irregular shape. Round to the nearest tenth. 8 cm 5 cm
90.2 cm²
241 cm²
65.1 cm²
72.3 cm²
Answer: Total area = 40 cm² + 25.12 cm² = 65.12 cm²
Step-by-step explanation:
https://brainly.com/question/925961
Answer:65.1
Step-by-step explanation:
A researcher reports that a sample of workers with high-stress careers slept significantly less than workers in the general
population, t(49)-2.5, p<.05.
• Compute eta-squared for this one-sample t test.
• Classification of effect.
(Privitera, 2019, p. 233, Learning check 3, #4, modified)
Eta-squared is a small effect size that means the difference between the sample of workers with high-stress careers and the general population is statistically significant, but not clinically meaningful.
What is eta-squared?Eta-squared is a proportion of variation explained by a statistical model or an experimental design. It is used in ANOVA and other types of regression analysis to determine how much of a dependent variable's variation may be attributable to the independent variable (s).
In the given question, Eta-squared is computed by taking the square of the t-value (2.5 in this example) and dividing it by the sum of the t-value and degrees of freedom squares (49 in this case). The result is an eta-squared value of 0.050.
This eta-squared value corresponds to a modest impact size. This suggests that the gap between the sample of high-stress employees and the overall population is minor but statistically significant. In other words, high-stress professionals may sleep less than the general population, but the difference is not significant enough to be clinically significant.
To know more about eta-squared, visit
brainly.com/question/14298919
#SPJ1