How many electronically non-equivalent kinds of protons, and how many kinds of carbons are present in the following compound? Dont forget that cyclohexane rings can undergo ring flips. a) Kinds of protons: ____
b) Kinds of carbons: ____

Answer:

E. More people from African American ethnic group is affected by AIDS than other groups.

Explanation:

because it is supported by the data provided in the circle graph. The graph shows that 48% of new AIDS cases in 2000 were in the African American population, while only 31% were in the white population and 20% were in the Hispanic population. This indicates that a disproportionate number of African Americans were affected by the AIDS epidemic in 2000. While option D "Many people are still misinformed about the severity of AIDS" is a possible conclusion, but it is not directly stated or implied by the data provided in the graph.

The acidity of HCN is very low. As a result, the conjugate base formed by it is the strongest.

In the framework of the Bronsted–Lowry acid–base theory, a conjugate acid is a chemical compound that is produced when an acid transfers a proton (H⁺) to a base. To put it another way, a conjugate acid is a base that has an additional hydrogen ion attached to it, whereas, in the opposite reaction, a base would lose a hydrogen ion.

On the other hand, a conjugate base is the byproduct of a chemical reaction that occurs after an acid has given up a proton in order to complete the reaction. Therefore, a conjugate base is a species that is created when a proton is removed from an acid. This is because the conjugate base is capable of gaining a hydrogen ion in the reverse process. Because some acids are able to release numerous protons, the conjugate base of acid may itself be acidic. This is due to the fact that some acids have this ability.

Want to know more about conjugate base visit the link which is given below;

https://brainly.com/question/30225100

#SPJ4

The equation for this reaction is

MnO4-(aq)+5Fe2+ (aq) +8H+ → Mn2+(aq)+5Fe3+(aq)+4H20

Concentration of Fe2+ in sample is 98 * 10 - 3 mole/L.

Concentration of Fe3+ in sample is 36.4×10-3 mole/L

Volume of sample = 50.0 mL

Volume of KMnO4 = 35.0 mL

Molarity of KMnO4 = 0.0280M

2MnO4-(aq) +8H+(aq) + 5Fe * 2 + (aq) Mn2+ (aq) + 5Fe * 3 + (aq) +4H20

2Fe3+(aq)+Zn(s) → 2Fe2+(aq)+Zn2+(aq)

The resulting solution titrated witH:

Volume of KMnO4 = 48.0 mL

Molarity of KMnO4 = 0.0280 M

The given reaction is:

2Mn) 4 - (aq) + 8H +(aq) + 5Fe * 2 + (aq) Mn2+ (aq) + 5Fe * 3 + (aq) +4H20

Divide the above redox reaction into two half reactions that is oxidation half reaction and reduction

Oxidation Half reaction:

Fe2+(aq) → Fe3+(aq)

Reduction half reaction:

MnO4-(aq) → Mn2+(aq) -

Assign oxidation states to each element in the above reactions.

Oxidation Half reaction:

Fe2+(aq) → Fe3+(aq)

Reduction half reaction: Mn+704--2(aq) → Mn2++2(aq) Balance the elements except oxygen.

Oxidation Half reaction:

Fe2+(aq) → Fe3+(aq)

Reduction half reaction:

Mn+704--2(aq) → Mn2++2(aq)

Now, add number of electrons (required) to that side of reaction where

reduction occurs.

Oxidation Half reaction:

Fe2+(aq) → Fe3+(aq)+e-

Reduction half reaction:

Mn+704--2(aq)+5e- +8H+ → Mn2++2(aq)

Balance the hydrogen and oxygen atoms by adding water molecules.

Oxidation Half reaction:

Fe2+(aq) → Fe3+(aq)+e-

Reduction half reaction:

Mn+704--2(aq)+5e- +8H+ → Mn2++2(aq)+4H20

Multiply the oxidation half reaction with 5 to balance the number of electrons in both reactions.

Oxidation Half reaction:

5Fe2+(aq) → 5Fe3+(aq)+5e- -

Reduction half reaction: Mn+704--2(aq)+5e- Now, add both reactions.

+8H+ → Mn2++2(aq)+4H20

Mn+704--2(aq)+5e- +8H+ → Mn2++2(aq)+4H20 5Fe2+(aq) → 5Fe3+(aq)+5e-

MnO4-(aq)+5Fe2+ (aq) +8H+ → Mn2+(aq)+5Fe3+(aq)+4H20

Learn more about oxidation:

brainly.com/question/25886015

#SPJ4

The volume of the tank that holds 52.9cm³ of water in cubic inches is 3.23 in³.

Volume refers to a three-dimensional measure of space that comprises a length, a width and a height.

Volume is measured in units of cubic centimeters in metric, cubic inches or cubic feet in English measurement.

According to this question, a tank holds 52.9cm³ of water. This volume can be converted to cubic inches as follows:

1 cubic centimetre (cm³) = 0.061 cubic inch (in³)

Hence, 3.23 in³ is the volume in cubic inches.

Learn more about volume at: https://brainly.com/question/28366961

#SPJ1

The IUPAC name is isobutyl propanate .Isobutyl propionate is widely used in food and beverage industries as a rum flavor.

Obtain the 1H NMR spectrum below?

To learn more about ester   refer to:

https://brainly.com/question/28564095

#SPJ4

The following compound contains protons and carbons that are not electronically equivalent. Proton types 6 and carbon types 6.

A proton is a stable subatomic particle with a positive charge equal to one electron charge and a rest mass of 1.67262 1027 kg, or 1,836 times the mass of an electron.

Except for the hydrogen nucleus, all atomic nuclei are composed of protons and neutrons, which are electrically neutral particles. Every chemical element's nucleus contains the same number of protons. This number specifies an element's atomic number and determines its position in the periodic table. An atom is electrically neutral when the number of protons in its nucleus equals the number of electrons orbiting it.

The proton was discovered during the early stages of atomic structure research.

Learn more about proton here:

https://brainly.com/question/15050183

#SPJ4

Change in temperature when quicklime reacts with water.

When ice cubes are separated from the freezer and conducted to room temperature, they turn into a liquid. This temperature is the boiling point of water. Heat makes water molecules move fast. Cooling air causes water vapor to change to a liquid. Water changes rapidly into a gas when water is heated to a temperature of 100 degrees Celsius or 212 degrees Fahrenheit.

When energy is free in an exothermic reaction, the temperature of the reaction mixture increases. When energy is soal up in an endothermic reaction, the temperature decreases.

So we can conclude that Some chemical reactions are distinguished by changes in temperature.

Learn more about temperature here: https://brainly.com/question/25677592

#SPJ1

The percent by mass of barium in BaCl₂ is 34.09%.

The percentage by mass of an element in a compound can be calculated by dividing the mass of the element in 1 mole of the compound by the compound's molar mass and multiply the result by 100.

Percentage by mass = mass of element/mass of compound × 100

According to this question, a compound with the chemical formula BaCl₂ can be calculated as follows:

Molar mass of barium chloride = 208.23 g/mol

Percent by mass of Cl = 71/208.23 × 100

Percent by mass of chlorine = 34.09%

Learn more about percent by mass at: https://brainly.com/question/30313524

#SPJ1

NH2CO is the chemical compound known as Formamide, it is a molecule that consists of one nitrogen atom, two hydrogen atoms, one carbon atom, and one oxygen atom. Therefore, the number of hydrogen atoms in NH2CO is 2.

BaSO4 is an ionic compound as it contains SO4 polyatomic ions in it.

Basically BaSO4 molecule does not have its own original shape as it is only an ionic compound and there is no bonding between Ba and SO4 ions, there is just sharing of electrons within the molecule.

Thus BaSO4 lewis structure does not have any shape.

What is the Lewis structure?

To know more about lewis structures, click the link given below:

https://brainly.com/question/20300458

#SPJ1

Considering the definition of equilibrium constant, the equilibrium molar the symbolic expression for the equilibrium constant is  ([tex][CO_{2} ]^{4}[/tex]×[tex][H_{2} O]^{6}[/tex])÷ ([tex][C_{2}H_{6} ]^{2}[/tex]×[tex][O_{2} ]^{7}[/tex])

Equilibrium is a state of a reactant system in which no changes are observed as time passes, despite the fact that the substances present continue to react with each other.

The concentration of reactants and products at equilibrium is related by the equilibrium constant Kc. Its value in a chemical reaction depends on the temperature and the expression of a reaction aA + bB ⇄ cC + dD is

Kc= ([tex][C]^{c}[/tex]×[tex][D]^{d}[/tex])÷ ([tex][A]^{a}[/tex]×[tex][B]^{b}[/tex])

That is, the constant Kc is equal to the multiplication of the concentrations of the products raised to their stoichiometric coefficients by the multiplication of the concentrations of the reactants also raised to their stoichiometric coefficients.

The balanced reaction is:

2 C₂H₆(g) + 7 O₂(g) ⇆ 4 CO₂(g) + 6 H₂O(g)

The constant Kc can be expressed as:

Kc= ([tex][CO_{2} ]^{4}[/tex]×[tex][H_{2} O]^{6}[/tex])÷ ([tex][C_{2}H_{6} ]^{2}[/tex]×[tex][O_{2} ]^{7}[/tex])

Finally, the equilibrium molar concentration is  ([tex][CO_{2} ]^{4}[/tex]×[tex][H_{2} O]^{6}[/tex])÷ ([tex][C_{2}H_{6} ]^{2}[/tex]×[tex][O_{2} ]^{7}[/tex])

Learn more about equilibrium constant:

brainly.com/question/16398257

#SPJ1

The forces that act on the parachute are;

We know that force is a vector, as such, the direction of the force ie very important. We ought to know that the force that acts on the parachute is such that would be able to lower its speed.

There are three forces that are acting on the parachute and they are;

1) Weight of the parachute

2) Upthrust on the parachute

3) Drag force on the parachute

The first and last forces reduces the speed of the parachute.

Learn more about parachute:https://brainly.com/question/28523278

#SPJ1

Plant cells contain two elements: a cell wall and a cell membrane. In plants, the cell wall covers the cell membrane. This gives the plant cell its distinct rectangular shape.

To learn more about rubber band from the given link:

https://brainly.com/question/13146233

#SPJ1

Answer:

In Explanation

Explanation:

An ionic compound that contains a polyatomic ion is a chemical compound made up of two or more ions that are held together by ionic bonds. Ionic bonds form when one or more electrons are transferred from one atom to another, creating ions with a positive or negative charge. In the case of an ionic compound that contains a polyatomic ion, the compound will contain at least one ion made up of more than one atom. These ions are called polyatomic ions and they have a net electrical charge. The ionic compound will be held together by the electrostatic attraction between the positive and negative ions.

Answer:

B. The release of carbon dioxide into the air during the burning of the rain forests adds to the greenhouse effect.

The destruction of rainforests has a negative impact on the environment, one of which is the release of carbon dioxide into the air during the burning of the rainforests, contributing to the greenhouse effect, which leads to global warming, and climate change. This is a significant negative effect of the destruction of the rainforests.

The density of the iron placed in the water is 7.87g/mL.

Density is the measure of the mass of matter contained by a unit volume. The density of a substance can be calculated by dividing the mass of a substance by its volume as follows:

Density = mass ÷ volume

According to this question, one adds 9.6 g of iron to 23.60 mL of water and observe that the volume of iron and water together is 24.82 mL.

Volume of iron = 24.82mL - 23.60mL = 1.22mL

Density of iron = 9.6g ÷ 1.22mL

Density of iron = 7.87g/mL

Therefore, 7.87g/mL is the density of the iron.

Learn more about density at: https://brainly.com/question/6107689

#SPJ1

If the reaction occurs in the single elementary step that is the three-body molecular collision, then the equation for the elementary step is :

2NO + O₂ -----> 2NO₂

The rate law of the reaction is given as :

Rate law = k [NO]² [O₂]

The rate law shows that how the rate of the chemical reaction depends on the concentration reactant. The Rate laws shows the mathematical description that  how the changes in the amount of the substance affect the rate of the chemical reaction.

Therefore, The equation for the elementary step is given as below :

2NO + O₂ -----> 2NO₂

To learn more about rate law here

https://brainly.com/question/20733241

#SPJ4

Answer: The total mass of the products must be equal to the total mass of the reactants

Explanation:

i = moles of solute in solution/moles of solute dissolved.

where i is called the van't hoff factor.

In a solution, solute ion association results in values less than 1.

In a solution, solute particles that interact together produce values greater than 1.

The ratio of the final moles after dissociation or association to the initial moles before to dissociation or association of an electrolyte in a solution is known as the Van't Hoff factor. The number of particles in the solute is a characteristic that is independent to the concentration of the solution.

The Van't Hoff factor illustrates how solutes affect the colligative properties of the solution. The Van't Hoff factor, which is produced when a substance is combined with its mass concentration, is the concentration ratio of the resulting particles.

The Van't Hoff factor's application in indicating the colligative properties is a significant attribute.

To know mare about Van't Hoff factor refer here :

https://brainly.com/question/8837607#

#SPJ4

The relationship between moles of a solute dissolved and the moles of solute is expressed as the van't hoff factor, i where i = 1 + α(n – 1)

Van’t Hoff factor is defined as the the number of moles of particles formed in solution per mole of solute. It is the property of the solute and expressed as "i". It does not depend on concentration for an ideal solution. The van’t Hoff factor of a real solution may be lower than the calculated value for a real solution. At high concentration values or when the solute ions associate with one another. The van’t Hoff factor is a positive number. It is not always an integer value. It is equal to 1 for a solute that does not dissociate into ions. It is greater than 1 for most salts and acids and less than 1 for solutes that form associations when dissolved.

Where, i = 1 + α(n – 1)

To learn more about Van't Hoff factor please visit:

https://brainly.com/question/22047232

#SPJ4

On the basis of the information above, the binary compounds in order of increasing bond polarity are CH4 < SiCl4 < SF4.

Binary compounds are forms of compounds that are processed from two elemental components. The elements that can form binary compounds can be metal elements and non-metallic elements. In addition, the constituent elements can also come from both.

The elements of a binary compound are:

Non-Metal Elements: C,H,O,N,S,P,F,Cl,Br,I,At,B,Be etc.

Elements Metals Similar oxidation numbers : IA : Li, Na, K, Rb, Cs, Fr and IIA : Be, Mg, Ca, Sr, Ba, Ra and Al, Zn, Ag and so on.

Metal elements with more than one oxidation number: Fe, Cu, Cr, Co, Ni, Pb, Sn, V, Mn, Hg, Pt, Au, Sc, Ti, and so on.

Learn more about binary compound at https://brainly.com/question/7960132.

#SPJ4

B: "Enabling communication between network clients and network services and D: "integration of network functionality with the host operating system" are the functions of the Application Layer in the OSI Model.

The Application Layer is the seventh and highest layer of the OSI (Open Systems Interconnection) Model. It is responsible for providing the interface between the application software and the network. The application layer provides the services that support the use of the network by the application programs. It is the layer at which the user interacts with the network and is the point at which the network becomes application-specific.

You can learn more about Application Layer at

https://brainly.com/question/14972341

#SPJ4

The correct answer for the question is there are gains from the trade.

Your question seems incomplete, it might be:

You are better at performing lab experiments, and your lab partner is better at writing lab reports. So, the two of you agree that you will do all the experiments, and she will write up all the reports. What term in individual principle is this?

Learn more about trade here:

https://brainly.com/question/15115779

#SPJ4

Due to the fact that hydrogen only has one electron in its outermost shell, it can only create one covalent connection with an atoms. Although hydrogen configuration of hydrogen is 1s1, and the 1s orbital's

The fundamental building components of matter are atoms. They have an electron-surrounded nucleus made up of protons and neutrons. The element to which an atom belongs is determined by the quantity of protons in the nucleus. For instance, all hydrogen atoms contain a single proton but all carbon atoms have six protons in their nucleus. Atoms may combine to create molecules, which are the building blocks of everything around us. Atoms may also join together to create compounds, which differ from the sum of their component atoms in terms of their chemical and physical characteristics. Atomic science or atomic physics is the study of atoms and how they behave.

Learn more about atoms.here:

https://brainly.com/question/29695801

#SPJ4

The mass of zinc is made from the single replacement reaction of calcium and zinc carbonate in order to produce calcium carbonate and zinc is 198 g.

The mass of zinc is made from the single replacement reaction of calcium and zinc carbonate in order to produce calcium carbonate and zinc is calculated from the equation of reaction given as follows:

Ca (s) + ZnCO₃ (s) ----> CaCO₃ (s)  + Zn (s)

The molar mass of Calciym = 40 g/mol

The molar mass of Calcium carbonate = 100 g/mol

The molar mass of Zinc = 65 g/mol

The molar mass of Zinc carbonate = 125 g/mol

Moles of calcium carbonate produced = 304/100

Moles of calcium carbonate produced = 3.04

Mass of Zinc produced = 3.04 * 65

Mass of Zinc produced = 198 g

Learn more about single replacement reaction at: https://brainly.com/question/19068047

#SPJ1

Each gas phase reaction is categorized according to the volume present before and after the reaction.

Gas-phase reactions can be defined as the intramolecular or intermolecular reactions that takes place between different phases of gas. Intramolecular reactions are defined as the reactions which involves decomposition of precursor molecules into activated species, and these species are further involved in the CVD process.

When the volume stays the same the gas phase reaction is given as,

A + B₂ → AB₂

When the volume is doubled the gas phase reaction is given as,

A₂ + B₂ → 2AB

When the volume is tripled the gas phase reaction is given as,

2AB₂ → A₂ + 2B₂

At some other volume changes different gas phase reactions are as follows,

2AB + B₂ → 2AB₂

2A₂ + 3B₂ → 2AB₃

3A + B → A₃B

Learn more about gas phase reactions from the link given below.

https://brainly.com/question/29851541

#SPJ4

Answer:

-4

Explanation:

The charge of the bottle of plasma would be -4, because 100 negatively charged ions (-) have a total charge of -100, and 96 positively charged ions (+) have a total charge of 96. When you subtract -100 from 96, you get -4.

Option C: carboxylic group is the functional group in the penicillin antibiotic that saves countless lives in World War II.

The study of penicillin's bacteria-killing properties, discovered by Alexander Fleming in 1928, continued. Penicillin, when isolated as a liquid, could be injected into the human bloodstream, where it would attack harmful bacteria while leaving healthy human cells alone. The fused beta-lactam structure, a free carboxyl acid group, and one or more substituted amino acid side chains are the three fundamental structural requirements for penicillin. By 1941, the more potent drug was available in injectable form to soldiers. Thus, option C is the relevant answer.

Gerhard Domagk, a German scientist, announced the development of Prontosil, the first sulfonamide drug, in 1932. Sulfonamides are chemicals that have antibacterial properties. Soldiers could carry these antibiotics, known as "sulfa drugs," in powdered and tablet form, in their medical kits, where they could treat bacterial infections such as streptococcal pneumonia, meningitis, and sepsis.

To know more about penicillin, refer to the following link:

https://brainly.com/question/6959796

#SPJ4

The BRET technology is the bioluminescence resonance energy transfer. It describes the energy that transfers in between the light emitting molecule and the light sensitive molecule. This statement is true.

The BRET technology describes the energy that transfers in between the light emitting molecule and the light sensitive molecule. It is the biophysical technique that is used to monitor proximity in the living cells. The fluorescence-based technologies based on the measurement of emission photons by molecules that is activated by absorption of the quantum of the electro magnetic radiation.

Thus, The BRET technology  limit its applications in the certain fields such as single-molecule detection.

This question is incomplete, the complete question is :

Bret technology is still not as sensitive as fluorescence-based technologies, which can limit its applications in certain fields such as single-molecule detection. The given as :

a) True

b) False

To learn more about fluorescence here

https://brainly.com/question/30117782

#SPJ4

You need to know the following details to determine the concentration of Pb2+ when the cell achieves equilibrium:the two half-cells' original Pb2+ concentrationsthe half-electrode cell's potential for Pb2+ and lead

A chemical system is said to be in equilibrium when the forward and reverse reaction rates are equal. The concentrations of the reactants and products are constant at equilibrium. When there is no net change in the concentration of reactants or products over time, a chemical system is said to be in equilibrium.When the rates of the forward and reverse processes are equal and the concentrations of reactants and products are constant, a closed system has reached equilibrium. Equilibrium is attained in an open system when the rate of reactant input equals the rate of product outflow.Dynamic equilibrium and thermodynamic equilibrium are the two different kinds of equilibrium. Dynamic balance

Learn more about equilibrium here;

https://brainly.com/question/28527601

#SPJ4

"The blue proton is more acidic because its conjugate base is less stable, with a negative charge on the more electronegative oxygen atom." is the correct choice

The acidity of a proton depends on the stability of its conjugate base. The more stable the conjugate base, the less acidic the proton.

In this case, the blue proton is bonded to an oxygen atom, which is more electronegative than the carbon atom to which the red proton is bonded.

When the blue proton is removed, the resulting negative charge is delocalized onto the oxygen atom, which is more electronegative, therefore the conjugate base is less stable, making the blue proton more acidic.

Learn more about Stability of Atoms here: https://brainly.com/question/1948879

#SPJ4