Answer:
1885.2 ohms
Explanation:
Step one:
given data
L=5H
f=60Hz
Required
The inductive reactance of the inductor
Step two:
Applying the expression
XL= 2πfL
substitute
XL=2*3.142*60*5
XL=1885.2 ohms
write the difference between convert and
Concave minores
A boat is drifting to the right with a speed of 5.0 m/s when the driver turns on the motor. The motor runs for 6.0 seconds causing a constant leftward acceleration of magnitude 4.0 m/s squared. What is the displacement of the boat over the 6.0 second time interval?
Answer:
[tex]D= -0.42km[/tex]
Explanation:
From the question we are told that
Drifting right with speed 5.0m/s
The motor runs for 6.0 seconds
Leftward acceleration of magnitude 4.0 m/s squared
Generally the equation [tex]V=ut+1/2at^2[/tex] can be used here
[tex]V=ut+1/2at^2[/tex]
Mathematically solving with the newton equation above we have that
[tex]D=5*6 + \frac{1}{2} (-4)*6^2[/tex]
[tex]D=30-72[/tex]
[tex]D=-42m[/tex] [tex]or -0.42km[/tex]
Therefore having this the Displacement is [tex]D= -0.42km[/tex] leftward
An automobile which set the world record for acceleration increase speed from rest to 96 km/h in 3.07 seconds what distance traveled by the time the final speed was achieved
Answer:
41.02m
Explanation:
Given parameters:
Initial velocity = 0m/s
Final velocity = 96km/hr
Time taken = 3.07s
Unknown:
Distance traveled by the time the final speed was achieved = ?
Solution:
To solve this problem, we first find the acceleration of the car;
Acceleration = [tex]\frac{v - u }{t}[/tex]
v is the final velocity
u is the initial velocity
t is the time taken
Now convert the the final velocity to m/s;
96km/hr to m/s;
1 km/hr = 0.278m/s
96km/hr = 96 x 0.278 = 26.7m/s
Now;
Acceleration = [tex]\frac{26.7 - 0}{3.07}[/tex] = 8.69m/s²
So;
v² = u² + 2as
v is the final velocity
u is the initial velocity
a is the acceleration
s is the distance
26.7² = 0² + 2 x 8.69 x s
712.89 = 17.38s
s = 41.02m
What 2 factors do you need in order to calculate speed?
Answer:
Distance and time.
Explanation:
Speed=Distance/time
The two factors which we need in order to calculate the speed of an object are the distance covered by the object and the time taken to cover that distance.
What is Speed?
Speed is the rate of change of position of an object in any direction. Speed is a scalar quantity as it has only magnitude and no direction. It is measured as the ratio of the distance covered by an object to the time taken in which the distance was covered by that object.
Speed has the dimension of distance covered by the time taken. Thus, the SI unit of speed is the combination of the basic units of distance and the basic unit of Time. Thus, the SI unit of speed is meter per second (m/s).
Learn more about Speed here:
https://brainly.com/question/28224010
#SPJ6
Q2. You push a crate up a ramp with a force of 10 N. Despite your pushing, the crate slides down the ramp 4 m. How much work did you do
Answer:
40 J
Explanation:
From the question given above, the following data were obtained:
Force (F) = 10 N
Distance (s) = 4 m
Workdone (Wd) =?
Work done is simply defined as the product of force and distance moved in the direction of the force. Mathematically, we can express the Workdone as:
Workdone = force × distance
Wd = F × s
With the above formula, we can obtain the workdone as follow:
Force (F) = 10 N
Distance (s) = 4 m
Workdone (Wd) =?
Wd = F × s
Wd = 10 × 4
Wd = 40 J
Thus, 40 J of work was done.
The least count of stopwatch is 0.2s.The time of 20 oscillations of a pendulum was measured to be 25s.Find the percentage error in the measurement of time
Answer:
0.8%
Explanation:
We are given;
Number of oscillations; n = 20
Time taken; t = 25 s
Formula for period of oscillation;
T = t/n = 25/20 = 1.25 s
We are told that the least count is 0.2 s. Thus, error is; ΔT = 0.2 s
percentage error in the measurement of time is given by;
(0.2/(20 × 1.25)) × 100% = 0.8%
If the angle between two forces increases, the magnitude of their resultant-
A Decreases
C. Remain unchanged
D. Decrease than decreases
Help! Help!
___ are a primary way to discourage drinking and driving.
A. High prices for alcohol
B. Scare tactics
C. Laws
Answer:
Laws
Explanation:
Laws are a primary way discourage drinking and driving
A primary way to discourage drinking and driving is Law.
What is drinking and driving?The person who takes in alcohol and then drives on the road. This is strictly prohibited.
Laws against the 'drinking and driving' will make people get scared of getting charged or sentenced to jail for some years. Lot of accidents have caused when there were no laws against the action.
Thus, Laws are a primary way to discourage drinking and driving.
Learn more about drinking and driving.
https://brainly.com/question/11317786
#SPJ2
The device shows the relative humidity at 22°C. What’s the water vapor density if the maximum water vapor in air at this temperature is 20 grams/cubic meter?
A device showing that at 22 degrees Celsius the relative humidity is 58%.
Answer:
The answer would be 11.6 g/m^3
Explanation:
Knowing that vapor's density at 100% humidity is 20g/m^3 we can calculate the answer using the following math:
0.58 * 20 = 11.6 grams per cubic meter
the units can also be written as g/m^3
The density of water vapor is 11.6 grams/cubic meter.
What is relative humidity?The quantity of atmospheric moisture that is present compared to the amount that would be there if the air were saturated is known as relative humidity, and it is stated as a percentage. Relative humidity depends on both moisture content and temperature because the latter quantity is temperature-dependent. The related temperature and dew point for the specified hour are used to calculate relative humidity. it is expresses as %.
Now given that the maximum water vapor in air at this temperature is 20 grams/cubic meter at 22°C, that is, density of vapor at 100% humidity is 20g/[tex]m^3[/tex] at 22°C.
And, The device showing that at 22 degrees Celsius the relative humidity is 58%
So, water vapor density at that moment is = 20g/[tex]m^3[/tex] × 58%
= 11.6 g/[tex]m^3[/tex] .
= 11.6 grams/cubic meter.
Hence, according to the measurement of device, the water vapor density is 11.6 grams/cubic meter.
Learn more about relative humidity here:
https://brainly.com/question/22069910
#SPJ2
( I will give a brainliest )
What must be changed, temperature or heat energy, during condensation?
Answer:
The answer is temperature lol
Explanation:
:)
14. After finishing her homework, Sue climbs up a 5.00 m high flight of stairs to her bedroom
Find the magnitude of Sue's weight
and how much
work Sue does in climbing the stairs if she
has a mass of 50.0 kg? (4.90 x 2 N, 2450J)
Explanation:
Given parameters:
Height = 5m
Mass of Sue = 50kg
Unknown:
Magnitude of Sue's weight = ?
Work done by Sue = ?
Solution:
Weight is the vertical force exerted by a body in the presence of gravity.
Mathematically;
W = mg
m is the mass
g is the acceleration due to gravity = 9.8m/s²
Weight = 50 x 9.8 = 490N
Work done = Force x distance = weight x height
Work done = 490 x 5 = 2450J
A(n) 636 kg elevator starts from rest. It moves upward for 4.5 s with a constant acceleration until it reaches its cruising speed of 2.05 m/s. The acceleration of gravity is 9.8 m/s 2 . Find the average power delivered by the elevator motor during this period. Answer in units of kW.
Answer:
The average power delivered by the elevator motor during this period is 6.686 kW.
Explanation:
Given;
mass of the elevator, m = 636 kg
initial speed of the elevator, u = 0
time of motion, t = 4.5 s
final speed of the elevator, v = 2.05 m/s
The upward force of the elevator is calculated as;
F = m(a + g)
where;
m is mass of the elevator
a is the constant acceleration of the elevator
g is acceleration due to gravity = 9.8 m/s²
[tex]a = \frac{v-u}{t} \\\\a = \frac{2.05 -0}{4.5} \\\\a = 0.456 \ m/s^2[/tex]
F = (636)(0.456 + 9.8)
F = (636)(10.256)
F = 6522.816 N
The average power delivered by the elevator is calculated as;
[tex]P_{avg} = \frac{1}{2} (Fv)\\\\P_{avg} = \frac{1}{2} (6522.816 \ \times \ 2.05)\\\\P_{avg} = 6685.89 \ W\\\\P_{avg} = 6.68589 \ kW\\\\P_{avg} = 6.686 \ k W[/tex]
Therefore, the average power delivered by the elevator motor during this period is 6.686 kW.
which of the following is not a mechanical form of energy?
a. Nuclear
b. Kinetic
c. Spring potential
d. Gravitational potential
Answer:
The answer is Spring Potential
Explanation:
Because all the others are a mechanical form of energy
Which type of telescope is best used to detect distant planets?
The metal wire is stretched so that its cross-section is still circular but its total length is now 10 meters. What is the resistance of the wire after stretching
What happens to most of the light waves that strike a clear pane of glass? O A. absorption B. diffraction O C. reflection O D. transmission
slight reflect but most goes through because glass is transparent
Most of the light waves that strike a clear pane of glass reflects. Details about reflection can be found below.
What is reflection?Refection in physics is the property of a propagated wave being thrown back from a surface such as a mirror.
Mirror is an example of an object that could be hit by an incumbent wave, however, most of the light waves that hit the mirror surface gets reflected back.
Therefore, most of the light waves that strike a clear pane of glass reflects.
Learn more about refection at: https://brainly.com/question/15487308
#SPJ2
let's say you hypothetically ran over someone with your car, and they are now under your car in between the front wheels and the back wheels, right, and they're stuck as in can't breathe type stuck, right, do you keep driving so they can breathe or do you let them chill under your car?
just curious...
question: is this actually hypothetical?
Explanation:
also just leave the car there go get some McDonald's or sum and come back and if they're still breathing then go ahead and move the car .
Answer:
the same thing the last guy said
Deshaun Watson launches a football at a speed of 24.7 ms and an angle of 33° above the horizontal How far down
the football field does the football land? What is the max height the football reaches during flight?
Show work
Answer:
9.23m
Explanation:
Max height = u²sin²theta/2g
u is the speed = 34.7m/s
theta is the angle of elevation = 33°
g is the acceleration due to gravity = 9.8m/s²
Substitute into the formula
Max height = 24.7²sin²33/2(9.8)
Max height = 610.09sin²33/2(9.8)
Max height = 610.09(0.29663)/19.6
Max height = 180.97/19.6
Max Height = 9.23m
Hence the max height the football reaches during flight is 9.23m
Determine the absolute pressure on the bottom of a swimming pool 30.0 mm by 8.4 mm whose uniform depth is 1.9 mm .
Answer:
=101343.62N/m^2
Explanation:
absolute pressure on the bottom of a swimming pool= atmospheric pressure +( 2 ×ρ ×g)
( 2 ×ρ ×g)= guage pressure
atmospheric pressure= 101325pa
h= height= 1.9 mm = 1.9×10^-3m
ρ = density of water
= 1000kg/m^3
g= acceleration due to gravity= 9.8m/s^2
Then substitute, we have
absolute pressure on the bottom of a swimming pool= 101325+ [0.0019 ×1000 × 9.8)]
=101343.62N/m^2
Hence, the absolute pressure on the bottom of a swimming pool is =101343.62N/m^2
1. A 75.0 kg man pushes on a 500,000kg wall for 250s but it does not move. How
much work does he do on the wall?
Answer:
0J
Explanation:
No work is being done on the wall by the man pushing on it.
Given parameters:
Mass of man = 75kg
Mass of wall = 500000kg
Time = 250s
Unknown:
Work done = ?
Solution:
Work done is the force applied on a body that moves it along a particular path.
For work to be done, distance must be move or displacement must occur.
Since the wall is not moving the distance is 0;
Work done = Force x distance
Since distance is 0m, work done is 0J
The work done on the wall by the man is 0 J.
To calculate the amount of work done by the man, we use the formula below.
Formula:
W = (ma)d............. Equation 1Where:
W = Work done on the wall by the manm = mass of the walla = acceleration of the walld = distance.from the question,
Given:
m = 500000 kga = 0 m/s² (not moving)d = 0 m.Substitute these values into equation 1
W = 500000(0)(0)W = 0 J.Hence, the work done on the wall by the man is 0 J.
Learn more about work done here: https://brainly.com/question/8119756
Define friction. Prove that tangent of angle of friction is equal to coefficient
of friction.
Answer:
Friction is the force that opposes movement between moving objects.
The angle at which one object starts to slip on the other is directly related to the coefficient. When the two objects are horizontal there is no frictional force. So, the coefficient of static friction is equal to the tangent of the angle at which the objects slide. A similar method can be used to measure μk.
Explanation:
Answer:
brainliest plsssssss
Explanation:
The resistance that one surface or object encounters when moving over another
What type of telescope did Galileo use to observe Jupiter?
reflector telescope
refractor telescope
radio telescope
latter telescope
Answer:
a refractor telescope
Explanation:
Answer:
a. refractor telescope
Optimus Prime is flying straight up at 24 m/s when he accidentally drops his mega-ray blaster and it falls 94 m to the ground below. Calculate how long it takes for his mega-ray blaster to hit the ground.
Answer:
The time it will take the mega-ray blaster to hit the ground is 2.57 s.
Explanation:
Given;
initial velocity of Optimus Prime, u = 24 m/s
height of fall of the mega-ray blaster, h = 94 m
The time of fall of the mega-ray blaster is calculated using the following kinematic equation;
[tex]h = ut + \frac{1}{2}gt^2\\\\94 = 24t + \frac{1}{2}(9.8)t^2\\\\94 = 24t + 4.9t^2\\\\4.9t^2 +24t -94 = 0\\\\Use \ formula \ method \ to \ solve \ for \ "t"\\\\a = 4.9 , b = 24, c = -94\\\\t = \frac{-b \ +/- \ \sqrt{b^2 -4ac} }{2a} \\\\t = \frac{-24 \ +/- \ \sqrt{(24)^2 -4(-94 \times4.9)} }{2(4.9)} \\\\t = \frac{-24 \ +/- \ \sqrt{2418.4} }{9.8}\\\\t = \frac{-24 \ +/- \ 49.177 }{9.8}\\\\t = \frac{-24 \ +\ 49.177 }{9.8} \ \ or \ \ t = \frac{-24 \ -\ 49.177 }{9.8} \\\\[/tex]
[tex]t = 2.57 \ s \ \ or \ \ t = -7.47 \ s[/tex]
t = 2.57 s
Therefore, the time it will take the mega-ray blaster to hit the ground is 2.57 s.
A horizontal force of 90.7 N is applied to a 40.5 kg crate on a rough, level surface. If the crate accelerates at 1.08 m/s, what is the magnitude of the force of kinetic friction (in N) acting on the crate?