Answers
Answer:
[tex]\text{Voltmeter}[/tex]Explanation: We need to find an instrument that measures potential difference across any part of the circuit, a potential difference is basically voltage difference across a circuit difference and the device used to measure this difference is known as:
[tex]\text{ Voltmeter}[/tex]Voltmeter used in a circuit
Related Questions
Two parallel wires carry currents of 20 A and 10 A, respectively, in the opposite direction and have a length of 5 m each. Determine the force between the wires if the distance between the wires is 1.0 cm.0.010 N, attraction0.010 N, repulsion0.020 N, attraction0.020 N, repulsion
Answers
Given:
The currents, I₁=20 A
I₂=10 A
The length of the wires, L=5 m
The distance between two wires, d=1.0 cm=0.01 m
To find:
The magnetic force between the wires.
Explanation:
As the wires are conducting the current in opposite directions, the nature of the force between the wires is repulsive.
The magnitude of the force between two wires is given by,
[tex]F=\frac{\mu_0I_1I_2L}{2\pi d}[/tex]Where μ₀=4π×10⁻⁷ H/m is the permeability of free space.
On substituting the known values,
[tex]\begin{gathered} F=\frac{4\pi\times10^{-7}\times20\times10\times5}{2\pi\times1\times10^{-2}} \\ =0.02\text{ N} \end{gathered}[/tex]Final answer:
The magnetic force between wires is 0.020 N, repulsive.
Why isn't geothermal energy used more often?Question 12 options:It's hard to find geothermal energy sources that are close to the surface.It produces too much pollution.It adds a large amount of water into the water cycle through evaporation.It is not a renewable energy source.
Answers
Geothermal energy can be used only if an energy source is present.
Mining is required to use geothermal energy.
The depth of mining increases earthquake risk.
Thus, it is difficult to find geothermal energy sources that are close to the surface.
Sound travels faster on a cold day than on a warm day. Is this true or false?
Answers
ANSWER
False
EXPLANATION
Sound waves travel by causing vibrations in particles in the direction of the wave and these vibrations can travel through any state of matter (solid, liquid, gas).
This means that if the vibrations occur faster, the sound waves can also be transmitted faster. On a warm day, the temperature is higher, which means that molecules of air vibrate faster, resulting in faster transmission of sound waves.
Therefore, it is false that sound travels faster on a cold day than on a warm day.
The hydrogen-to-helium ratio is an important piece of evidence for the Big Bang Theory. What is the minimum hydrogen-helium ratio observed?A. 4:1B. 3:1C. 2:1
Answers
Correct answer is option B.
Answer:
3:1
Explanation:
Jason is pulling a box across the room. He is pulling with a force of 24 newtons and his arm is making a 44 angle with the horizontal, what is the horizontal component of the forcehe is pulling with
Answers
an ice has a volume of 8975 ft^3. what is the mass in kilograms of the iceberg? the density of ice 0.917 g/cm^3
Answers
The density is given by:
[tex]\rho=\frac{m}{V}[/tex]where V is the volume and m is the mass.
To determine the mass we have to solve the equation for m:
[tex]m=\rho V[/tex]Now, before we can calculate the mass we have to convert the volume given to cubic meter, this comes from the fact that the density is given in g/cm^3 units. We have to remember that a ft is equal to 30.48 cm, then we have:
[tex]8975ft^3(\frac{30.48\text{ cm}}{1\text{ ft}})(\frac{30.48\text{ cm}}{1\text{ ft}})(\frac{30.48\text{ cm}}{1\text{ ft}})=2.54\times10^8[/tex]Hence the volume of the iceberg is:
[tex]2.54\times10^8cm^3[/tex]Now that we have the volume in the correct units we plug its value and the density in the equation for the mass above:
[tex]\begin{gathered} m=2.54\times10^8(0.917) \\ m=2.32\times10^8 \end{gathered}[/tex]Hence the mass of the iceber is 2.32x10^8 g.
Therefore the mass of the iceberg in kilograms is:
[tex]2.32\times10^5\text{ kg}[/tex]In the setup of a cart pulled by a hanging mass, without friction, we have the following information: the mass of the cart is 0.53 Kg., and the hanging mass is 0.077 Kg.
Determine the acceleration of the cart (in m/s2).
Answers
The acceleration of the cart
a=1.2431m/s^2
What is acceleration?Generally, The equation for Newton's second law of motion is
2nd law of motion,
Fnet=m a
on hanging mass,
m_1 g-T=m_1 a
m_1 g-m_2 a=m_1 a
Acceleration, [tex]$a=\frac{m_1 g}{m_1+m_2}$[/tex]
[tex]&a=\frac{0.077 \mathrm{~kg} \times 9.8 \mathrm{~m} / \mathrm{s}^2}{0.077 \mathrm{~kg}+0.53 \mathrm{~kg}} \\[/tex]
a=1.2431m/s^2
Read more about Acceleration
https://brainly.com/question/12550364
#SPJ1
Hello, I am having a hard time understanding this question, is it possible for you to help me?
Answers
Answer: h = 14 m
Explanation:
From the information given,
weight of rocket = 10N
Recall, weight = mg
Thus, mg = 10
where
m = mass of object
g = acceleration due to gravity and its values is 9.8 m/s^2
At the exact top of the trajectory, the total mechanical energy = 140 J
Recall,
total mechanical energy = kinetic energy + potential energy
At the exact top, kinetic energy = 0
Thus,
140 = potential energy
Recall, potential energy = mgh
where h is the height of the object(in this case, h is the height at the exact top and its value is 140J). Thus,
140 = mgh
Substituting mg = 10, we have
140 = 10h
h = 140/10
h = 14 m
An installation consists of a 30-kVA, 3-phase transformer, a 480-volt primary, and a 240-volt secondary. Calculate the largest standard size circuit breaker permitted for primary-only protection to be used without applying Note 1 of Table 450.3(B).
Answers
Answer: 45 A
Explanation:
Primary only protection 3-phase
I = 3 phase kVA / ( 1.723 * V)
I = 30000 / ( 1.732 * 480 ) = 36.085 A
Table 450.3(B)
Currents of 9A or more column
primary only protection = 125%
Max OCPD pri = 125% of I = 1.25 * 36.085 = 45.11 A
Table 450.3(B) Note 1 does not apply, use next smaller Table 240.6(A)
Next smaller = 45 A
How much power is used by a contact lens heating unit that draws 0.05 A of current from a 197 V line?
Answers
Given,
The current drawn by the contact lens heating unit, I=0.05 A
The supply voltage, V=197 V
The electric power is given by the product of the current drawn and the supply voltage.
Thus the power used by the given device is given by,
[tex]P=VI[/tex]On substituting the known values,
[tex]\begin{gathered} P=197\times0.05 \\ =9.85\text{ W} \end{gathered}[/tex]Thus the power used by the contact lens heating unit is 9.85 W
Use Newton’s Law of Universal Gravitation and Newton’s Second Law to
Find g = acceleration due to gravity
Show g is independent of mass
Answers
By equating the two forces, acceleration due to gravity g is obtained which is independent of mass
What is Newton’s Second Law ?The law state that the rate of change of momentum is directly proportional to the force applied.
From Newton’s Second Law, Force F = mg. And from Newton’s Law of Universal Gravitation, Force F = GMm/r²
Where m is the mass of the satellite or the body revolving round the earth.
Equate the two forces.
mg = GMm/r²
The two m cancelled out leaving
g = GM/r²
Where
g = Acceleration due to gravityM = Mass of the earthG = Universal gravitational constantr = Distance between them.Therefore, since the mass of the satellite m has cancelled out, acceleration due to gravity g is independent of mass.
Learn more about Newton's Laws here: https://brainly.com/question/25998091
#SPJ1
Calculate the depth in the ocean at which thepressure is three times atmospheric pressure.Atmospheric pressure is 1.013 x 10^5 Pa. Theacceleration of gravity is 9.81 m/s^2and them/sdensity of sea water is 1025 kg/m^3Answer in units of m.
Answers
In order to determine the depth in the ocean, use the following equation:
[tex]h=\frac{P-P_o}{\rho g}[/tex]h: depth
P: pressure = 3*Po
Po: atmospheric pressure = 1.013*10^5Pa
g: gravitational acceleration constant = 9.8m/s^2
p: density of water = 1025 kg/m^3
Replace the previoua values into the formula for h and simplify:
[tex]\begin{gathered} h=\frac{3P_o-P_o}{\rho g}=\frac{2P_o}{\rho g} \\ h=\frac{2(1.013\cdot10^5Pa)}{(1025\frac{kg}{m^3})(9.8\frac{m}{s^2})}\approx20.17m \end{gathered}[/tex]Hence, the depth in the ocean is approximately 20.17m
At what point, if any, during a dive is a skydiver experiencing complete freefal? Explain. (1 point)•skydiver will experience complete freefall the moment right before they jump out of the plane because they are free to start fallingat any moment.•A skydiver will experience complete freefall when they first jump out of the plane because they only experience air resistance oncethey deploy their parachute.•A skydiver will never experience complete freefall until after they have deployed their parachute because they are now falling at asafe speed for their landingA skydiver will never experience complete freefall because as soon as they start their dive, they will experience air resistance.
Answers
To find:
Which of the given statements is true.
Explanation:
The free fall is defined as the motion of an object under the influence of only gravitational force. In free fall, there will be no forces, except gravitational force acting on the object.
When the skydiver jumps, gravity will pull the diver downwards. And the air resistance due to the air in the atmosphere will oppose this motion of the diver. Thus there will be two forces acting on the diver, gravity and the air resistance. Thus the skydiver will never experience free fall.
Final answer:
Thus the correct answer is option D.
Pls quick will mark brainliest.
Lance is working in a library using a trolley to carry books. As he stacks books from the trolley on shelves, it gets easier to push or pull the trolley. Which part of Newton's laws of motion explains the increased ease of moving the trolley?
A. Objects at rest tend to stay at rest.
B. Objects in motion tend to stay in motion.
C. Every action has an equal and opposite reaction.
D. Larger objects require greater amounts of force to move.
Answers
Answer: D
Explanation:
Larger objects require greater amounts of force to move.
As he stacks books from the trolley on shelves, it gets easier to push or pull the trolley because the trolley gets lighter when the books are shifted from the trolley to the shelves. So, larger objects require greater amounts of force to move. Hence, option D is correct.
What is inertia?Inertia is a property of bodies that prevents them from moving or, if they are already moving, causes them to change the speed or direction of their motion. The inertia of a body is a passive quality that prohibits it from acting in any way besides opposing active agents like forces and torques.
A moving body continues to move not because of its inertia but rather because no force exists to stop it, alter its direction, or accelerate it.
According to the question, when there are books on the trolley they require a greater amount of force to move but when the books are shifted on the shelves it's easier to move the trolley. So inertia is proportional to mass.
To get more information about inertia :
https://brainly.com/question/3268780
#SPJ5
A student has a cannon that can fire a cannonball at speeds up to 97.0mph. The students wants to determine the maximum range of the cannon and if she could hit a target on the ground as shown. Neglect drag and the initial height of the cannonball.
Answers
Answer:
88 ft / sec = 60 mph
Thus 97/60 * 88 = 142 ft/sec maximum speed of cannonball
R = V^2 sin 2 θ / g = 142^2 / 32 = 630 ft
Using 3.28 ft / m
630 ft / 3.28 f/m = 192 m is the maximum range of the cannonball
Vy = 142 ft / sec * sin 45 = 100 ft/sec vertical speed at 45 deg
Tup = 100 ft/sec / 32 ft/sec^2 = 3.12 sec time to reach height
T = 2 * 3.12 = 6.24 total time in air when fired at 45 deg
8.1 kg of copper sits at a temperature of 64 oF. How much heat is required to raise its temperature to 743 oF? The specific heat of copper is 385 J/kg-oC. Submit your answer in exponential form.
Answers
ANSWER:
STEP-BY-STEP EXPLANATION:
Given:
Mass (m) = 8.1 kg
T1 = 64 °F
T2 = 743 °F
Specific heat (C) = 385 J/kg*°C
[tex]undefined[/tex]Which is increased when the string of a stringed instrument is tightened?1) timbre2) pitch3) wavelength4) loudness
Answers
The pitch of a note is the same as its frequency.
Remember that te timbre depends on the shape and other properties of the vibrating object. The loudness is related to the amplitude of the wave, and the wavelength of sound is inversely proportional to the frequency.
On the other hand, the frequency of the sound of a string is proportional to the square root of the tension in the string. Then, if the tension increases (if the string is tightened), the frequency will also increase (and if the frequency increases, the wavelength decreases).
Therefore, the parameter that increases when a string of a stringed instrument is tightened, is the pitch.
Therefore, the answer is:
[tex]2)\text{ Pitch}[/tex]Please help me, it's asking me here how does static energy work?
Answers
Static energy is the energy due to motionless state of a particle. If a particle is at rest it possess static energy also known as potential energy. When some force is applied to the particle then the static energy gets converted into kinetic energy of the particle.
Acceleration problems use the 4 Step method to solve each of the following. a wagon has a beginning speed of 10 km/hr and it reaches 75 km/hr in 7 sec
Answers
Vi = initial speed = 10 km/h
Vf= final speed = 75 km/h
t = time = 7 sec
a = acceleration
First, express km/h in m/s
Vi = 2.78 m/s
Vf= 20.83 m/s
Apply
a = (vf-vi) / t
replace:
a = (20.83 - 2.78 ) / 7 = 2.58 m/s^2
read through the different scenarios below and choose what kind of energy transfer is happening for each one. note: each answer will be used 1 time.
Answers
1. A ceiling fan plugged into the wall socket.
The input is the electrical energy and the output is the mechanical energy from the rotation of the fan blades.
So, the energy transfer must be electrical to mechanical.
2. A stove heating a pot of water for pasta
The input is the light energy from the stove and the output is the thermal energy to heat the water.
So, the energy transfer must be light to thermal.
3. A wind turbine generating power
The input is the mechanical energy from the rotation of the turbine blades and the output is the electrical energy that is being generated.
So, the energy transfer must be mechanical to electrical.
4. A person eats a snack when they are hungry and has the energy to take a walk.
The input is the chemical energy that the person gets from eating food and the output is the mechanical energy (doing physical work).
So, the energy transfer must be chemical to mechanical.
5. A solar panel is used to create power
The input is the light energy from the Sun and it is being converted into electrical energy to generate power.
So, the energy transfer must be light to electrical.
6. A microwave is used to heat up a burrito.
The input to the microwave is the electrical energy and the output is the thermal energy to heat up the burrito.
So, the energy transfer must be electrical to thermal.
7. A lamp is plugged into the wall and shines down on a room
The input to the lamp is electrical energy which is being converted into light energy.
So, the energy transfer must be electrical to light.
8. A plant grows by absorbing the sun's rays
The input to the plant is the nuclear energy from the sun and the output is the chemical energy.
So, the energy transfer must be nuclear to chemical.
9. A game controller uses batteries to power it.
The batteries provide chemical energy as input and the output is the electrical energy to power the controller.
So, the energy transfer must be chemical to electrical.
10. The sun heats up a person sunbathing at the beach.
The input is the nuclear energy from the sun and output is the thermal energy by absorbing the heat.
So, the energy transfer must be nuclear to thermal.
How much heat in kcal must be added to 0.68 kg of water at room temperature (20°C) to raise its temperature to 45°C?answer:____ kcal
Answers
Given:
Mass, m = 0.68 kg
Initial temperature, T1 = 20°C
Final temperature, T2 = 45°C
Let's find the amount of heat needed.
Apply the Specific Heat Capacity formula:
[tex]\begin{gathered} Q=mc\Delta T \\ \\ Q=mc(T_2-T_1) \end{gathered}[/tex]Where:
m is the mass = 0.68 kg
c is the specific heat of water = 4.187 J/kg °C−1
T1 = 20°C
T2 = 45°C
Plug in the values and solve for Q:
[tex]\begin{gathered} Q=0.68*4.187*(45-20) \\ \\ Q=2.84716(25) \\ \\ Q=71.179\text{ kJ} \end{gathered}[/tex]Where:
1 kJ = 0.239 kCal
Since the answer is to be in kCal, we have:
[tex]Q=71.179*0.239=17.01\text{ kCal}[/tex]Therefore, the amount if heat added is 17.01 kCal.
ANSWER:
17.01 kCal
A child playing by the side of a well is throwing a stone vertically into the well with an initial velocity of 5 m/s. if the stone falls into the water 3 s later, find the height, h, of the point which the stone is thrown from the surface of the water. (g=10 m/s2)
a) 15m
b)30m
c)45m
d)60m
Answers
The height of the well is 30m
We are given that ,
The initial velocity of the stone = u = 5m/s
The stone fall into well in time = t = 3s
The acceleration due to gravity = g = 10 m/s²
To get the height of the stone which is thrown from the surface of the water in the well by equation,
h = ut + 1/2 gt²
Where, u is initial velocity in m/s, h is height in m, t is time in secs, g is acceleration due to gravity which is vertically upward direction i.e. (-10m/s²)
h = (5m/s) (3s) + 1/2 (-10m/s²)(3s)²
h = (15m) - (5m/s²)(9s²)
h = -30 m
Therefore, the height of the stone which is thrown upward is 30 m . And here, we can neglect the negative sign due to height is never be in negative.
To know more about height
https://brainly.com/question/14289116
#SPJ1
Neptune circles the Sun at a distance of 4.50 × 1012 m once every 164 years. Saturn circles the Sun at a distance of 1.43 × 1012 m. What is the orbital period of Saturn?
Answers
The orbital time period of the Saturn is 29.6 years
We are given that,
Distance from Sun to Saturn is = a = 1.43 × 10¹²
The mass of the Sun is = M =1.99 × 10³⁰kg
The Gravitational constant = G = 6.67 × 10⁻¹¹N-m²kg⁻²
To find the orbital period of Saturn we can use the equation ,
[tex]T^{2} = \frac{4\pi }{GM}a^{3}[/tex]
Where, T is the orbital time period of the of the Saturn , M is the mass of the sun , G is the gravitational constant.
Therefore, after putting the value in above equation we can get,
[tex]T^{2} = \frac{4(\(3.14)^{2} }{(6.67*10)^{-11} )N-m^{2} kg^{-2}}(1.43*10^{12}) ^{3}m[/tex]
[tex]T^{2} = \sqrt{8.688*10^{17} } s[/tex]
[tex]T = 932094415.818s[/tex]
So that , from above to convert the orbital time period of Saturn from second into year i.e. above seconds divided by seconds (1 sec = 3.154 ×10⁷ Earth years)
Thus, the orbital time period can be ,
[tex]T = 29.6 years[/tex]
To know more about time period
https://brainly.com/question/3956637
#SPJ1
Find the volume of a cuboid with the following measurments
Length:4.5 cm Breadth: 2 cm Height: 50 cm
ans is :45,000
But I am not getting the correct ans
please send working
Answers
Answer:
The answer should be 450 cm³
Cannot be 4500 unless one of the measurements is in meters. See detailed explanation below
Explanation:
This is pretty much straightforward
V = l x w x h
where
l = length, w = width, h = height
Given the values for l, w, h
V = 4.5 x 2 x 50
= 450 cm³
The only way you can get 45,000 is if one of the measurements is in meters and others in cm. Please check your question carefully to see what units were used and what units the answer should be in
Which one of the following is false? Select one: A. Wires resist the flow of current a little, components such as bulbs resist more B. Adding bulbs in the circuit means greater resistance C. Conductors allow current to flow relatively easily D. Metal and plastic are poor conductors E. The greater the resistance the less current flows
Answers
Metals are good conductor of electricity while plastics are bad conductors of electricity.
Thus, the statement D Metals and plastic are poor conductors is false.
Hence the correct option is D.
what is the maximum efficiency that a heat engine could have when operating between the normal boiling and freezing temperatures of water
Answers
The maximum efficiency that a heat engine could have when operating between the normal boiling and freezing temperatures of water is 26.8 %
η = ( [tex]T_{H}[/tex] - [tex]T_{C}[/tex] ) / [tex]T_{H}[/tex] * 100
η = Efficiency
[tex]T_{H}[/tex] = Hottest temperature
[tex]T_{C}[/tex] = Coldest temperature
Hottest temperature = Boiling point
Coldest temperature = Freezing point
[tex]T_{H}[/tex] = 100 °C = 373 K
[tex]T_{C}[/tex] = 0 °C = 272 K
η = ( 373 - 273 ) / 373 * 100
η = 100 / 373 * 100
η = 26.8 %
In a heat engine, the heat energy is converted into mechanical energy which will be used to do mechanical work like pushing a piston out from the cylinder.
Therefore, the maximum efficiency that a heat engine could have when operating between the normal boiling and freezing temperatures of water is 26.8 %
To know more about maximum efficiency of a heat engine
https://brainly.com/question/25289326
#SPJ1
find the pressure increase in a fluid when a force of 25 N is exerted on a closed syringe where the piston radius is 2 cm.
Answers
Given:
• Force, F = 25 N
,• Radius, r = 2 cm
Let's find the pressure increase.
To find the pressure increase, apply the formula:
[tex]\Delta P=\frac{Force}{Area}=\frac{F}{\pi r^2}[/tex]Where:
F = 25 N
r is the radius in meters = 2 cm
P is the pressure
Convert the radius from cm to meters.
Where:
100 cm = 1 m
2 cm = 2 /100 = 0.02 m
Hence, we have:
[tex]\begin{gathered} \Delta P=\frac{25}{\pi(0.02)^2} \\ \\ \Delta P=\frac{25}{\pi(0.0004)} \\ \\ \Delta P=\frac{25}{0.00125664} \\ \\ \Delta P=19894.4\text{ Pa}\approx1.99\times10^4\text{ Pa} \end{gathered}[/tex]Therefore, the pressure increase is 1.99 x 10⁴ Pa.
ANSWER:
1.99 x 10⁴ Pa
Car A is traveling with a constant velocity of 18 [m/s]. Car B speeds up from 0 [m/s] to 10 [m/s] in 4 seconds. Which car has a greater acceleration?Car ACar BCar A and Car B have the same accelerationNeither car is accelerating
Answers
Given:
Car A is traveling with a constant velocity of,
[tex]18\text{ m/s}[/tex]The initial speed of car B is,
[tex]v_i=0\text{ m/s}[/tex]After t=4 s, carB's speed is,
[tex]v_f=10\text{ m/s}[/tex]To find:
Which car has a greater acceleration
Explanation:
The acceleration of Car A is Zero as there is no change in velocity with time.
The acceleration of car B is,
[tex]\begin{gathered} a_B=\frac{v_f-v_i}{t} \\ =\frac{10-0}{4} \\ =2.5\text{ m/s}^2 \end{gathered}[/tex]So, Car B has greater acceleration.
Hence, Car B has greater acceleration.
Why is the (k) a negative value in hooks law.
Answers
Well, we will hav that neither "k" or "x" are negative, the negative sign is external to both values and the reason is that this is written in that way to represent the "direction" of the movement of the system. Form example, when the spring is extended then it will represent that it will pull back, and when it is compacted it represents that it will pull outwards.
[tex]F_s=-kx[/tex]It is simply a technicallity.
A 77 kg student traveling in a car with a constant velocity has a kinetic energy of 1.7 104 J. What is the speedometer reading of the car in km/h? answer with:_____km/h
Answers
ANSWER
75.65 km/h
EXPLANATION
Given:
• The student's mass, m = 77 kg
,• The kinetic energy of the student in the car, KE = 1.7 x 10⁴ J
Find:
• The speed read in the speedometer of the car, which is the speed of the student, v (in km/h)
The kinetic energy of an object with mass m, traveling at a speed v, is,
[tex]KE=\frac{1}{2}mv^2[/tex]Solving for v,
[tex]v=\sqrt{\frac{2KE}{m}}[/tex]Replace the known values and solve,
[tex]v=\sqrt{\frac{2\cdot1.7\cdot10^4J}{77kg}}\approx21.013m/s[/tex]Note that because the kinetic energy is given in Joules - which is equivalent to kg*m²/s², the speed we found is in m/s. Now, knowing that there are 3600 seconds in 1 hour and that 1 km is equivalent to 1000 m, we can convert this to km/s,
[tex]v=21.013\frac{m}{s}\cdot\frac{3600s}{1h}\cdot\frac{1km}{1000m}\approx75.65km/h[/tex]Hence, the speedometer reading of the car is 75.65 km/h, rounded to the nearest hundredth.