Answer:
f=vλ where: f is the frequency of the wave in hertz. v is the velocity of the wave in meters per second. λ is the wavelength of the wave in meters
f= 32*8 = 256 hertz
Explanation:
An Olympic swimmer can swim a distance of 360m in 8.5 minutes. What is her speed?
Answer:
42.3529412 m/min or 0.705882353 m/s
Explanation:
We can calculate speed using the following formula.
[tex]s=\frac{d}{t}[/tex]
where [tex]d[/tex] is distance and [tex]t[/tex] is time.
The Olympic swimmer can swim 360 meters in 8.5 minutes. Therefore,
[tex]d= 360 \ m \\t= 8.5 \ min[/tex]
Substitute the values into the formula.
[tex]s=\frac{360 \ m}{ 8.5 \ min}[/tex]
Divide.
[tex]s= 42.3529412 \ m / min[/tex]
Her speed is 42.3529412 meters per minute.
If we want to find her speed in meters per second, convert the minutes to second.
1 minute is equal to 60 seconds, so we can multiply 8.5 by 60.
[tex]8.5 *60=510[/tex]
The swimmer can swim 360 meters in 510 seconds.
[tex]s=\frac{d}{t}[/tex]
[tex]d= 360 \ m \\t= 510 \ s[/tex]
[tex]s=\frac{360 \ m}{510 \ s}[/tex]
[tex]s=0.705882353 \ m/s[/tex]
Her speed is also 0.705882353 meters per second.
which of the following substances does not conduct electricity
a)brass b)copper c)carbone(graphite) d)carbon(diamond)
Answer:
diamonds
Explanation:
Diamond does not conduct electricity.
• A form of carbon in which each of the atom of carbon is joined to four other atoms of carbon, giving rise to a giant covalent composition is a diamond.
• Due to this, diamond is very robust and exhibits high melting point. Thus, is used to cut tools.
• Diamond does not conduct electricity, due to the absence of delocalized electrons in the structure.
Thus, diamond does not conduct electricity. Option d is correct.
To know more about:
https://brainly.com/question/2042843
1.) What are the chemical properties of matter?
Answer:
Chemical properties are properties that can be measured or observed only when matter undergoes a change to become an entirely different kind of matter. They include reactivity, flammability, and the ability to rust. Reactivity is the ability of matter to react chemically with other substances.
Explanation:
Your cute btw :)
How far is it from H to G?
Use your knowledge of atomic calculations to complete the chart.
Element
Protons
Neutrons
Electrons
Atomic
Number
3
15
Atomic
Mass
7
31
35
19
28
31
P
ci
Ni
K
Ag
H
39
19
-18
47
OK
1
1
14
14
06
3
Si
w
74
1010
Ne
10
10
Answer:
For hydrogen. H
Explanation:
Atomic number is 1
Proton number is 1
Mass number is 2
Neutron number is 1
Which of the samples pictured is most likely a nonmetal?
Answer:
c
Explanation:
Answer:
it is c because its a hard one and you should know what that is and it is a nonmetal even if not exactly its to be slightly
Explanation:
What are the three types of symbiosis?
Answer:
commensalim, mutualism, parasitism
a table that compares the properties of suspensions, colloids, and solutions.
Answer:periodic table
Explanation:
What is the mass of a
12.31 cm3 piece of
copper having a density of
8.96 g/cm3
Answer:
110.30 grams
You have to multiply by 8.96.
12.31 x 8.96 = 110.30 grams.
Therefore, that is your answer.
(Sorry I had to answer twice it was because of LukeG1).
What are some tips *from a girl* to get a girl to like you without making it obvious
All elements on the periodic table are________
Answer:
Explanation:
arranged in order of increasing.
From observing the plant and animal cell diagrams above, which cell seemed to have more of a regular structure?
Answer:
the green one
Explanation:
i need help with this pls
Answer:
C Is The Correct Answer Because The Deeper The Rock Is The Older It Is So The Top Is The Youngest And The Bottem Is The Oldest
Which of these is an extensive ?
A- density
B- melting point
C- temp.
D- volume
trial 2, 2.68 g/cm/3 trial 3, 2.84g/cm/3. aluminum has a density of 2.70g/cm/3 calcute the percent error for each trial.
Answer:
trial 2: 0.74
trial 3: 5.19
I think but the equation for sloving percent error is:
(true value - determined value)/true value * 100
Explanation:
A loaf of bread has a mass of 0.5kg and a volume of 2500cm³. what is the density of the bread
Density is mass divided by volume.
Since mas is 0.5kg we need to convert it to grams. Using conversion factors we get the mass of the bread to be 500g.
So densty=500/2500
density =1/5 grams per cubic centimeter
:)
thomas atoms theroy
Answer:
Do you want to us to explain what it is
Explanation:
Answer:
APEX
Explanation:
The electron
Round off the following quantities to the number of significant figures indicated in parentheses: 69.733 g (2)
Answer:
70
Explanation:
There are 5 significant figures in the problem. Since it has a decimal point, we start on the left hand side and work our way to the right. You would end up at 69, but then you have to round up since the next number is a 7, which is greater than or equal to 5.
Approximately how tall is Able Hill? Don't forget your unit
Answer:
about 42m 3
copied from google
hope that helps
approximately 42m 3 was Able Hill
_____________ dating places the rocks and rock layers in an area into sequential order. ________ dating gives an exact date on rock layers.
Geologic, Absolute
Relative, Geologic
Relative, Absolute
Time, Geologic
Which are characteristics of all living things? Check all that apply. are made of cells need energy A. can breathe B. respond to stimuli C. can reproduce D.grow and develop / help me please
Answer:
All can be charactoristics of a living thing
Explanation:
Answer:
Grow
Need energy
respond to stimuli
are made of cells
Explanation:
correct on edge 2022 :)
HELP PLEASE, I NEED THIS BY TODAY!
If you have a 10 gram sample of uranium-235 how much would still be uranium-235 after 1407.6 million years?
Answer:
2.48 g
Explanation:
From the question given above, the following data were obtained:
Original amount (N₀) = 10 g
Time (t) = 1407.6 million years
Amount remaining (N) =?
Next, we shall determine the rate of decay (K) of uranium-235. This can be obtained as follow:
NOTE: Uranium-235 has a half life of 700 million years.
Decay constant (K) =?
Half life (t½) = 700 million years
K = 0.693/t½
K = 0.693/700
K = 9.9×10¯⁴ / year
Therefore, Uranium-235 decay at a rate of 9.9×10¯⁴ / year.
Finally, we shall determine the amount of Uranium-235 remaining after 1407.6 million years as follow:
Original amount (N₀) = 10 g
Time (t) = 1407.6 million years
Decay constant (K) = 9.9×10¯⁴ / year
Amount remaining (N) =?
Log (N₀/N) = kt /2.3
Log (10/N) = (9.9×10¯⁴ × 1407.6) /2.3
Log (10/N) = 0.60588
10/N = antilog (0.60588)
10/N = 4.04
Cross multiply
10 = 4.04 × N
Divide both side by 4.04
N = 10/4.04
N = 2.48 g
Therefore, 2.48 g of uranium-235 is remaining after 1407.6 million years.
If you have a 10 gram sample of uranium-235 there would still be uranium-235 after 1407.6 million years - 2.5 grams.
The half-life of U-235 is the time it takes for half the U to decay. We know that U-235 has 703.8 million years as its half-life which means it takes 703.8 million years to half of its initial amount.
After one half-life, half (50 %) of the original amount will remain. After a second half-life, half of that amount (25 %) will remain, and so on.We can construct a table as follows:
No. of Fraction Amount
half-lives t/(yr × 10⁶) remaining remaining/g
1 703.8 ½ 10/2 = 5
2 1407.6 ¼ 10/4 = 2.50
Thus, the correct answer is - 2.5 grams.
Learn more:
https://brainly.com/question/13955335
Density of mercurio is
Answer:
The density of mercury is 13.6 g/mL, which is equal to 1360 kg/m3.
What are some ways each person could reduce air pollution and energy consumption? a. adjust the temperature settings - hotter in winter and cooler in summer b. adjust the temperature settings - cooler in winter and hotter in summer c. cut down trees near the house d. replace plumbing fixtures that leak Please select the best answer from the choices provided A B C D
Answer:
b.
adjust the temperature settings - cooler in winter and hotter in summer
Explanation: I took the quiz
Answer:
B. adjust the temperature settings- cooler in winter and hotter in summer
Explanation:
edge 2020
which statement describes redis experiment which helped disprove spontaneous generation?
Answer:
it is A i just got it right
Explanation:
6.Think about where you live now or where you have lived in the past; use complete sentences to describe this environment and the weather. What building materials do you believe would work well to build a home in that area? Explain why you chose these materials.
Answer and Explanation:
I have always lived in the same region. The region where I live is flat and stable, the site has asphalt and the climate is tropical with a long summer and poorly defined seasons. My region does not have drastic changes and temperature and the climate is hot most of the year. For this reason, it is necessary to use materials that are thermal insulators, on the contrary we need to use materials that are not good thermal insulators such as concrete blocks, bricks, cement and ceramics, we will also need common tiles and rafters to support them.
What is the density of a purple gas that has a mass of 10 g and a volume of 20 mL? Show your work!
Answer: 0.5g/ml
Explanation:
The density of a substance is given by the following formular; Mass / Volume,
Where mass = 10g
volume = 20ml
Density = 10g/ 20ml = 0.5g/ml
YOU DO:
1) A 15.0 gram sample of sodium hydrogen carbonate, NaHCO3, was contaminated with an impurity. In order
to determine the purity of the sample, it was heated to decompose the material according to the following
reaction:
2NaHCO3 → Na2CO3 + H2O + CO2
If 6.35 grams of sodium carbonate, Na2CO3, were recovered, what percentage (by mass) of the sample was
sodium hydrogen carbonate, NaHCO3?
I
Answer:
67.1%
Explanation:
Based on the chemical equation, if we determine the moles of sodium carbonate, we can find the moles of NaHCO₃ that reacted and its mass, thus:
Moles Na₂CO₃ - 105.99g/mol-:
6.35g * (1mol / 105.99g) = 0.0599 moles of Na₂CO₃ are produced.
As 1 mole of sodium carbonate is produced when 2 moles of NaHCO₃ reacted, moles of NaHCO₃ that reacted are:
0.0599 moles of Na₂CO₃ * (2 moles NaHCO₃ / 1 mole Na₂CO₃) = 0.1198 moles of NaHCO₃
And the mass of NaHCO₃ in the sample (Molar mass: 84g/mol):
0.1198 moles of NaHCO₃ * (84g / mol) = 10.06g of NaHCO₃ were in the original sample.
And percent of NaHCO₃ in the sample is:
10.06g NaHCO₃ / 15g Sample * 100 =
67.1%Which statement explains how the bands in the crystal of a metal are like atomic orbitals?
A. They both have localized electrons that orbit specific atoms.
B. They both involve ionization of some atoms so bonding can occur.
C. They both have delocalized electrons that move from atom to atom.
D. They both allow electrons to move from lower energy levels to higher energy levels.
Answer:
D
Explanation:
Correct On EDU
Crystal lattice of metals are highly ordered in which the ions and electrons are arranged in a stoichiometric proportion. But,electrons can excite to higher energy levels as they fo in atomic state. Thus , option D is correct.
What is crystal lattice?Crystal are highly ordered structures of solids and is anisotropic in nature with a perfect geometry and crystal lattice units. There will be free electrons present in the interstices spaces and which can be delocalized throughout the lattice results in conduction.
Electrons can acquire energy to excite to the higher energy levels from the lower energy level in a crystal lattice. Electrons are revolving around the nucleus of an atom through definite circular paths of fixed energy.
Electrons in an atom tends to excite to higher energy levels and then will return to the lower energy level by emission of energy in the form of light or heat. This process make the element coloured and conducting as in the case of crystal bands in metals.
Hence, both atoms and metal lattice allow electrons to move from lower energy levels to higher energy levels and option D is correct.
To find more about crystal lattice, refer the link below:
https://brainly.com/question/11207173
#SPJ6
i need to know what the summary of matter is helpppppp!!!!
Answer:
Matter can be classified according to physical and chemical properties. Matter is anything that occupies space and has mass. The three states of matter are solid, liquid, and gas. A physical change involves the conversion of a substance from one state of matter to another, without changing its chemical composition.
Explanation: