A toy train is going around a circular track of a radius of 1.2 m as shown on the diagram. The train takes 9 seconds to complete one lap of the circular track.
(a) Calculate the speed of the train

(B) on the diagram draw in the train's velocity and acceleration vectors at B. Label clearly.


(c) For the train to move in a circle like this there
must be a centripetal force acting on it.
Explain how this force is being produced

Answers

Answer 1

Explanation:

r=1.2, Period(T) = 9s

a) Speed(V) = ωr

ω = 2 x Pi(3.142) x frequency

frequency = 1/period

therefore; the frequency will be 1/9 = 0.1Hz

Therefore Speed(V) = 2 x 3.142 x 0.1 x 1.2=0.75m/s

C) Centripetal and centrifugal forces are the forces experienced by rotating objects. The centripetal force keeps an object moving in a circle and is always pointed toward the center of that circle. For instance, the gravitational force of the sun is a centripetal force that keeps the Earth orbiting around it. Its direction is always orthogonal to the motion of the body and towards the fixed point of the instantaneous center of curvature of the path.


Related Questions

If we say that a galaxy has a lookback time of 1 billion years, we mean that _________.

Answers

If we say that a galaxy has a lookback time of 1 billion years, we mean that its light traveled through space for 1 billion years to reach us.

have a great day!

The photograph shows a kettle made of the element copper. Which statement describes a chemical property of copper?

A. Copper forms a patina when it interacts with air.

B. Copper is a solid at room temperature.

C. Copper is a good conductor of electric current.

D. Copper can be re-shaped when hit with a hammer.

Answers

A copper forms a patina when it interacts with air
Answer A
Explanation
B describes its matter (composition)
C describes its ability to conduct
D describes is mailability

A describes a chemical reaction with the air

Which magnet would be best for lifting heavy metal, moving it,and letting go of it

Answers

The electromagnet. It’s controlled by an electric coil

How are solar flares different from solar prominences.

Answers

A prominence is a loop of cool incandescent gas that extends above the photosphere. A solar flare is an explosive release of energy that comes from the sun and causes magnetic ditrubances.

Answer:

What is the difference between a prominence and a solar flare? A prominence is a loop of cool incandescent gas that extends above the photosphere. A solar flare is an explosive release of energy that comes from the sun and causes magnetic ditrubances.

Explanation:

What kind of particles exert electric force?

Answers

The particles which are in the field of forces means in the field line of forces they experience electric force.

Explanation:

what is one watt power?

Answers

Answer:

1-watt power is defined as the power produced when 1 Joule of work is done for 1 second.

Explanation:

Hope this helps! Please let me know if you need more help or think my answer is incorrect. Brainliest would be MUCH appreciated. Have a wonderful day!

Answer:

In terms of electromagnetism, one watt is the rate at which electrical work is performed when a current of one ampere (A) flows across an electrical potential difference of one volt (V), meaning the watt is equivalent to the volt-ampere (the latter unit, however, is used for a different quantity from the real power of an electrical circuit).

Explanation:

Hope it helps :)

Pls mark brainleist <3

`

`

`

Tori

1. ….. has no definite shape or size
A. Solid
B. Liquid
C. Gas
D. Plasma

2. Distance traveled per unit of time is..
A. Velocity
B. Speed
C. Motion
D. Acceleration

3. The SI unit of pressure is the..
A. Pascal
B. Atmosphere
C. Torr
D. Bar
( please help me)

Answers

Answer:

See below ↓↓↓

Explanation:

1. C. Gas

Gases are classified as a state of matter which has no definite shape or sizeLiquids are commonly confused with gases in this manner, but remember liquids take the definite shape of the container if poured in, gases are not so

2. B. Speed

As the term "distance" is given, it is definitely speedOn the other hand, if "displacement" was given, then it would be velocity

3. A. Pascal

All of the options are units of pressureBut, the SI unit is actually N/m², which otherwise commonly called Pascal

Hello people ~
On charging by conduction, mass of a
body may

(a) increase

(b) decreases

(c) increase or decrease

(d) None of these

Answers

increase or decrease

body gains mass when gets negative charge/electronsbody losses mass when gets positive charge/losses electrons

Thus the mass may increase and  decrease due to conduction || varies

Please help

how long have people used coal as a source of fuel
A. 200 years
B. 1000 years
C. 3000 years
D. 5000 years

Answers

Answer:

c. 3,000

Explanation:

I am guessing 3000 years

please help me out !!
Space exploration costs the taxpayers of united states millions of dollars each year. However, it is the only way we will learn more information about space. Do you think the cost of space exploration is justified or should those tax dollars be spent elsewhere? Explain your answer.

Answers

The space exploration program should continue, and should receive continued generous annual funding.

The US space program has NEVER launched a capsule full of money into space. NEVER !  The money spent on the space program is paid to hundreds of thousands of employees and contractors who design, develop, build, and launch the spacecraft and the scientific equipment they carry.  

These people who get the money spend it to buy homes, cars, clothes, beer and bread, and send their children to school ... exactly the same things other Americans do with the money they earn on their jobs.

Just because the most visible product of this industry gets shot into space and never comes back does NOT mean that the money to do it is also lost forever.  It's taxpayer money that the government pours straight back into the nation's economy, through the hands of the workers and scientists who operate the US space program.  

Which two characteristics might a model have if it is a three-dimensional model of magnetic force made by using a magnet and magnetic field lines? A. Some field lines have arrows that point in different directions. B. Arrows on the field lines point from the magnet's north pole to its south pole. C. The field lines are closest together in and near the magnet D. The field lines cross paths as they go from one pole of the magnet to the other.​

Answers

Answer:

 B C     I suppose , though A is correct too

Explanation:

The arrows on the magnetic field lines point from the magnet's north pole to its south pole. The field lines are closest together in and near the magnet. Thus, the correct options are B and C.

What is Magnetic force?

Magnetic force is the force of the electrically charged particles which are in motion, such as attraction, or repulsion results from their activity. It is the fundamental force behind the phenomena like how electric motors operate and magnets are drawn to metals.

Usually, when we draw magnetic field lines, we start to draw outwardly from the North pole to the South Pole. This same direction is prevalent on the Earth due to the fact that the Earth functions as a giant magnet. Thus, the model describes that the magnetic field lines will spread out of the north end of the magnet to the south end. The magnetic field lines are closest in and near the magnet.

Therefore, the correct options are B and C.

Learn more about Magnetic force here:

https://brainly.com/question/3160109

#SPJ2

Which of the following is NOT a chemical change/reaction?

Question 3 options:

2 liquids are combined, and a solid precipitate is formed


phase/state change (solid, liquid, gas)


production of gas bubbles


rusting metal

Answers

Answer:

rusting metal I think hehe

g Two point charges -6 C and -8 C charge are 12 cm apart. What is the magnitude of the electric field at a point half-way between the two charges

Answers

Explanation:

q1 = -6

q2 = -8

d^2 = (6/100)^2 = 0.0036

k = 1/4*(pi*E) where E js the permittivity of free space

F = (k*q1*q2)/(d^2)

Substitute your values into this equation and solve

Seat belt laws are a good idea because of which of the following law of motion?
A. Newton’s second law of motion
B. Newton’s first law of motion
C. Newton’s third law of motion
D. Murphy’s law of motion
E. None of the above
Please help

Answers

Answer:

B. Newton's first law of motion.

Explanation:

The law of inertia or the first law of motion.

Answer:

Newton's first law

Explanation:

This law states that

Every object remains in at rest or its motion unless any external force is applied

When car breaks sudden then we get pulled forwards so seat belt is for safety

Compressed air moves through a pipe at a speed of 0.5m/s. If the diameter is 1 cm, what is the flow rate of the air

Answers

Answer:

Square the pipe's radius. With a radius, for instance, of 0.05 meters, 0.05 ^ 2 = 0.0025. Multiply this answer by the pressure drop across the pipe, measured in pascals. With a pressure drop, for instance, of 80,000 pascals, 0.0025 x 80,000 = 200.

Explanation:

I hope this helps!

You serve a volleyball with a mass of 2.1kg the ball leaves your hand with a speed of 30 m/s. What is the kinetic energy of the ball?

Answers

Answer:

945 joules

Explanation:

the formula for kenetic energy is:

0.5 × m × v^2

where m is in (kg) ane (v) is in meter per second.

so we can just use the formula;

0.5 × 2.1 × 30^2

so the answer is 945 joules

Proper use of the friction zone makes it easier to:.

Answers

Friction is the opposition offered to the movement of a surface on another and depends on the nature of the surfaces in contact.

What is friction?

The term friction refers to the opposition that is offered by surfaces in contact when they move over each other. The question is incomplete but I will try to help you the much I can.

Now recall that fricton only depends on the nature of the surfaces in contact. The friction is te reason when heat is provides in the moving parts of machines.

Learn more about friction: https://brainly.com/question/15117038

.................................

Answers

Ah yes the answer to that is
……
Followed by
……………
Your welcome

The diagram shows the water levels inside the containers.
A)91 cm
B) 34 cm ( the water levels)
•) The density of water is 1000 kg/m²
ii) Calculate the pressure that the water causes at the base of container A.​

Answers

Answer:

8927.1 Pa

Explanation:

pressure = height x density of liquid x g

               = (91/100) x 1000 x 9.81

               = 8927.1 Pa

acceleration can occur when a car is moving at a constant speed. what must cause this acceleration?​

Answers

The gasoline is charging the the car to move faster

When working with a conservative force, it is generally easier to work with a potential energy function, which is a scalar, than to compute the work along some path from the forces and displacements, which are vectors. the change in the potential energy of an object depends only upon its initial and final position, but it is independent of the path undertaken to move between those positions. some effort is initially required to obtain the potential energy function. consider a block of mass m attached to the end of a horizontal hooke's law spring with spring constant k. the block is free to move along a frictionless horizontal surface, and displacements are measured from the equilibrium position of the spring, taken here as the origin of the coordinate system.

a = fs = - k x iì‚
b = ds = dx iì‚
c = dw = - k x dx
d = dus = k x dx

required:
a. a finite change in the potential energy may be obtained by integrating infinitesimal changes. what integral expressions is correct for this hooke's law spring?
b. perform the integrations, and input an expression for the change in the potential energy of the spring, also known as the elastic potential energy.

Answers

a. The integral expression for the change in potential energy of the spring is ΔU = ∫kxdx

b. The change in potential energy of the spring is ΔU = k(x₂² - x₁²)/2

Since we are given the differential elastic potential energy, du, to find the integral expression, we integrate du.

a. The integral expression for the change in potential energy of the spring

The integral expression for the change in potential energy of the spring is ΔU = ∫kxdx

Since the infinitesimal elastic potential energy of the spring du = kxdx, integrating both sides of the expression, we have

ΔU = ∫du

ΔU = ∫kxdx

So, the integral expression for the change in potential energy of the spring is ΔU = ∫kxdx

b. The elastic potential energy of the spring

The change in potential energy of the spring is ΔU = k(x₂² - x₁²)/2

Performing the integration for the change in potential energy of the spring

ΔU, we have that integrating for change in length from x₁ to x₂

ΔU = ∫kxdx

ΔU = k[x²/2]₁²

ΔU = kx₂²/2 - kx₁²/2

ΔU = k(x₂² - x₁²)/2

So, the change in potential energy of the spring is ΔU = k(x₂² - x₁²)/2

Learn more about elastic potential energy here:

https://brainly.com/question/25996974

Determino la masa en gramos y kilogramos de 1500 cm3 de alcohol etílico, cuya densidad es aproximadamente 790.0 Kg/m3. Tomar en cuenta que: Densidad (ρ) = masa (m)/volumen(v).

Answers

Para calcular el contenido en gramos de una bebida alcohólica basta con multiplicar los grados de la misma por la densidad del alcohol (0,8). El contenido de alcohol de una bebida depende de la concentración de alcohol y del volumen contenido.

The mass in grams and in kilograms of ethyl alcohol respectively is: a) 1185.0 g and b) 1185 kg

What is density?

Density is an intensive property of matter. It represents the relationship between the mass and the volume of a body or substance. Its units are in the International System kg/m3, kg/L, g/ml, g/cm3, among others.

The density formula is:

Density = m/V

The mass is obtained by clearing this equation

m=Density *Volume

data

m= ?

V= 1500 cm3 * 1 * 10⁻⁶ m³ / 1 cm³ = 0.0015 m³ = 1.5 * 10⁻³ m₃

Density= 790.0 kg/m3

m = 790.0 kg/m³ * 1.5 * 10⁻³m³ = 1.185 Kgm = 1.185 kg * 1000 g/ 1 kg = 1185,0 gm=  1185,0 g

See more about this at:https://brainly.com/question/23704878

Which famous astronomer discovered jupiter’s largest moons?.

Answers

Answer:

Galileo Galilei

Explanation:

The famous astronomer Galileo Galilei was the one who discovered Jupiter’s large moons.


I hope it helps! Have a great day!

Muffin ^^

Answer:

Galileo Galilei

Explanation:

The great and famous astronomer Galileo Galilei was the one that discovered Jupiter’s largest moons.


I hope it helps! Have a great day!

Anygays-

If two objects collide and stick together, what must increase?


A. the acceleration due to gravity

B. the friction between the two objects

C. the force of gravity between the objects

D. the two objects' momentum

Help pls.

Answers

Collision where the objects stick together and have the same final velocity. Also called a perfectly inelastic collision. Reverse inelastic collision where momentum is conserved and kinetic energy increases. I hope this kind of helped

4. If it requires 19,208 J to lift an object in 10s, how much power is needed?

Answers

Answer:

1920.8

Explanation:

If the object is lifted straight up at constant speed, then the force needed to lift it is equal to its weight mg. The work done on the mass is then W = Fd = mgh. We define this to be the gravitational potential energy (PEg) put into (or gained by) the object-Earth system

6. Aste owing questions 1. Answer question i and ii based on the information given below. In biology laboratory, Tashi observed a cell under a microscope. While on the cell, his attention was drawn to a tiny star like close to a large dense spherical body at the centre. He also observer many rod shaped structures scattered inside the cell. (i) Identify the cell organelles observed by Tashi. body a (ii) Is it a plant cell or an animal cell? 3. Study the diagram of a cell in Figure 1.8 and answer the following questions. i. In which group of organisms would you find this cell? Give reasons to support your answer. ii. Name the parts labelled A, B, C, and D. B TO D​

Answers

The cell is an animal cell and the rod-shaped structures in the cell are mitochondria.

What are cell organelles?

Cell organelles are membrane-bound structures found within the cell of eukaryotes which carry out specific functions in the cell.

Some cell organelles include:

mitochondria ribosomes Golgi bodies endoplasmoc reticulum

The rod-shaped structures in the cell are mitochondria.

Asters are star-shaped structures found within the cell which are found close to the nucleus d

at the early mitosis in an animal cell.

Asters do not form during mitosis in plants.

Therefore, the cell is an animal cell and the rod-shaped structures in the cell are mitochondria.

Learn more about cell organelles at: https://brainly.com/question/14029612

A transformer has 1,000 turns of wire in the primary coil and 50 turns in the secondary coil. If the input voltage is 2,400 V, what is the output voltage? - this is for my physical science class

Answers

the output voltage of the transformer that has 1,000 turns of wire in the primary coil and 50 turns in the secondary coil is 120 V

What is a transformer?

A transformer is an electrical device that transfer electric energy from one circuit to another.

To calculate the output voltage of the transformer, we use the formula below.

Formula:

V/V' = N/N'........... Equation 1

Where:

V = Primary/input VoltageV' = Secondary/output voltageN = Primary turnsN' = Secondary turns

Make V' the subject of the equation

V' = VN'/N........... Equation 2

From the question,

Given:

V = 2400 VN' = 50 turnsN = 1000 turns.

Substitute these values into equation 2

V' = (2400×50)/1000V' = 120 V

Hence, the output voltage of the transformer that has 1,000 turns of wire in the primary coil and 50 turns in the secondary coil is 120 V.

Learn mor about transformer here: https://brainly.com/question/148412

The potential energy of a swing is 200 j at its highest point and 50j as its lowest point energy is conserved ,what is the kinetic energy of the swing at its lowest point

Answers

Answer:

150J

Explanation:

yee thats it hope it helps

If military strategists understand wave behavior, what impact could that have on the armed forces?

Answers

Answer:

they may find ways of solving wars without fighting

Explanation:

This is because when the military understand why the other nation is planning a war they can resolve it simply

26. Suppose you have a circuit with two lightbulbs that have the same resistance
connected in series and you have another circuit with two lightbulbs with the same
resistance connected in parallel. What would happen if you disconnected one bulb in
each circuit?

Answers

Answer:

It would break the circuit.

Explanation:

Other Questions
The sky of early Earth was probably pinkish-orange. As life became established, the sky turned blue. What was responsible for the color change? Find x helpppppppppppp What influence did the Dada movement have on future art?a.It challenged critics to change their views.b.It caused a huge controversy over the artists involved in the movement.c.It played a major role in changing the perception of art and breaking all of the rules. help please!!!!!!!!! According to the mil-std-6016 what are the requirements for information to be passed between and among joint forces and organizations, along with the technical interfaces, and protocols called Where does petroleum come from? O A. Bauxite reserves O B. Ancient sea creatures OC. Ancient plants O D. Dinosaur remains PLEASE ANSWER FAST!!!!!!!!!!!!!!!! Why are alloys made from many metals Ex. 3 A printing press prints 120 sheets in 3 min . ( 1) Express the printing as a rate. ( 2) How many sheets are printed in 1 h? (3) How long will it take to print 1000 sheets? ________ ARE LAWS PASSED BY CONGRESS THAT REQUIRE STATES TO MEET CERTAIN MINIMUM STANDARDS OR GUIDELINESFOR PARTICULAR SERVICES OR ACTIVITIESMANDATESUNSHINEPREEMPTIONSUNSET Can someone help please Would you lie to keep your life, or tell the truth and lose it? Explain your answer. David realizes that he needs money to start a bookstore. If he decides toobtain funds through debt financing, what will his company have to do?A. Collect government sales taxB. Pay its workersC. Pay funds to more than one ownerD. Pay loans which of the following best describes Andreas attitude toward myra? what is the expanded form of 812004? Owners of a recreation area are filling a small pond with water. They are adding water at a rate of 34 liters per minute. There are 400liters in the pond to start.Let W represent the total amount of water in the pond (in liters), and let T represent the total number of minutes that water has beenadded. Write an equation relating W to T. Then use this equation to find the total amount of water after 16 minutes.Equation:D=0XTotal amount of water after 16 minutes: liters5? In paragraph 6, Dame Shirley states that the gift she sent is her last golden handiwork because she _______.A. is keeping the rest of the goals she finds for herselfB. will not be sending any more gifts to the recipient of her letterC. did not enjoy panning for gold and will not do it againD. is returning home soon and will not be sending any more letters What are the period and amplitudeof the function?period T; amplitude : 1.5period T; amplitude3period : z; amplitude : 1.5O period~; amplitude : 3 nicole is socially inhibited and oversensitive to negative evaluation What evidence supports the claim that Earth is older than the oldest rocks?