Answer:
It is True.
Explanation:
Investigators use this tactic to see if the suspect is recalling by memory and if they will change their story after being asked to recall backwards.
Answer:
True
Explanation:
Correct on the test
A solvent has a freezing point of 10°C. What is the most likely freezing point if 5 grams of Salt is mixed with the solvent? (AKS 5e)
Question 5 options:
15°C
20°C
5°C
10°C
[tex]\huge{\color{hotpink}{Hola}}[/tex]
if an atom has 4 protons, 5 neutrons, and 4 electrons, what would its atomic mass be?
Answer:
4
Explanation:
If I remember correctly, the atomic # will always be the same as the # of electrons
Use the given Nernst equation and reaction to solve this problem. What is the potential of this cell with the given conditions?
2Li (aq) + F2(g) 2Li+(aq) + 2F- (aq)
E° = +5.92 volts
T = 200°C
[Li+] = 10.0 molar
[F-] = 10.0 molar
Answer:
The 2nd one is the one
Explanation:
and it isn't writen out all the way
(hurry pls)Carl plugs in a lamp that has 0.67 of resistance and 8.1 volts running through it. What is the amount of current running through the lamp? C 543 A C 0.08 A C 12.09 A C743 A
Answer:
C)12.09 Ampere
Explanation:
V= IR
Where I= current of the system
R= resistance= 0.67 ohm
V= potential difference=8.1 volts
Substitute the values
8.1= I× 0.67
I= 8.1/0.67
=12.09 Ampere
A student wants to determine if a
sample of tap water contains Mg+2.
Which of the following pieces of
information are not needed to do a
titration ?
Answer:
The Density of Magnesium.
Explanation:
Calculate the new temperature when a container of
gas has a pressure of 795 mm Hg at 273 K and the
pressure is lowered to 358 mm Hg.
(Gay Lussac's Law) P1T2/P2T1
- 0.00165
- 246
- 123
- 606
Answer: The new temperature of container is 123 K.
Explanation:
Given: [tex]P_{1}[/tex] = 795 mm Hg, [tex]T_{1}[/tex] = 273 K
[tex]P_{2}[/tex] = 358 mm Hg, [tex]T_{2}[/tex] = ?
Formula used to calculate the new temperature is as follows.
[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}\\\frac{795 mm Hg}{273 K} = \frac{358 mm Hg}{T_{2}}\\T_{2} = 123 K[/tex]
Thus, we can conclude that the new temperature of container is 123 K.
Which planet rotates the slowest on its axis?
Answer:
Venus
What is the Slowest Planet. Venus, which is floating higher each evening in twilight, low in the west, is the slowest-spinning body in the known universe. If you walked along a bike path that circles its equator, you'd only need to go four miles an hour to keep night from ever falling on Venus.
Answer:
Venus
Explanation:
It rotates once every 243 days, by far the slowest rotation period of any of the major planets.
hope its correct :)
Which pair of elements will form an ionic bond?
a. Potassium and Oxygen
b. Iron and Barium
C. Sulfur and Nitrogen
d. Calcium and Silicon
I believe that the answer is A.
The combination of potassium (K) and oxygen (O2) produces K2O (potassium oxide). The balanced equation is 2K + O2 ==> K2O.
Why are nonnative species a threat to biodiversity?
A. They often use up resources that other organisms need
B. They are not able to successfully breed in the wild
C. They release pollution into many environments
D. They easily contract and spread diseases to other organisms
Answer:
A. They often use up resources that other organisms need.
Explanation:
Invasive alien species are animals, plants, fungi and microorganisms entered and established in the environment from outside of their natural habitat. T
hey reproduce rapidly, out-compete native species for food, water and space, and are one of the main causes of global biodiversity loss.
can somebody help me with this question please
Answer:
concave lens
Explanation:
it's concave lens because it diverges the ray/beam of light.
Concave lens
The concave lens always repels the ray of light to go away .There are 2 types of lens
ConvexConcaveWhat are the two limitations of earth plates
Answer:
The tectonic style and viability of modern plate tectonics in the early Earth is still debated. Field observations and theoretical arguments both in favor and against the uniformitarian view of plate tectonics back until the Archean continue to accumulate. Here, we present the first numerical modeling results that address for a hotter Earth the viability of subduction, one of the main requirements for plate tectonics. A hotter mantle has mainly two effects: 1) viscosity is lower, and 2) more melt is produced, which in a plate tectonic setting will lead to a thicker oceanic crust and harzburgite layer. Although compositional buoyancy resulting from these thick crust and harzburgite might be a serious limitation for subduction initiation, our modeling results show that eclogitization significantly relaxes this limitation for a developed, ongoing subduction process. Furthermore, the lower viscosity leads to more frequent slab breakoff, and sometimes to crustal separation from the mantle lithosphere. Unlike earlier propositions, not compositional buoyancy considerations, but this lithospheric weakness could be the principle limitation to the viability of plate tectonics in a hotter Earth. These results suggest a new explanation for the absence of ultrahigh-pressure metamorphism (UHPM) and blueschists in most of the Precambrian: early slabs were not too buoyant, but too weak to provide a mechanism for UHPM and exhumation.
Explanation:
3. If a gas has a pressure of 32.1 psi at a temperature of 25°C, then what is the new pressure if the temperature is increased to 75°C?
Answer:
P2 = 37.5 psi
Explanation:
P1 = 32.1 psi
T1 = 25°C + 273 = 298K
T2 = 75°C + 273 = 348K
P2 = ?
P1/T1 = P2/T2
or
P2 = (T2/T1)P1
= (348K/298K)(32.1 psi)
= 37.5 psi
can anyone tell me the answer
Answer:
A. A as concentration decreases.
Explanation:
A represents a reactant and B is a product, the concentration of the latter increases at the expense of the concentration of the former. Hence, A is the reactant of the chemical reaction as its concentration decreases.
PLEASEEEE HELP THIS IS SCIENCE
IGNORE THE QUESTIONS WHERE I ANSWERED, I GUESSED
Answer:
where is the answer??
Please do not just take the points without answering the question.
WILL GIVE BRAINLIEST!
__ gain electrons in the formation of ionic bonds because they have such high ionization energies indicating a strong attraction between the electrons and the nucleus.
A- metals
B- nonmetals
Answer:
A-Metals
Explanation:
because they have valence electrons
When carbon disulfide, CS2, forms from its elements. Heat is absorbed. How much heat would be required to produce 5.0 moles of carbon disulfide
Answer:
5.9 × 10² kJ
Explanation:
When carbon disulfide, CS₂, forms from its elements, heat is absorbed. The corresponding value for the standard enthalpy of formation of carbon disulfide is 117.36 kJ/mol. The thermochemical equation that represents this process is:
C(graphite) + 2 S(s, rhombic) ⇒ CS₂(g) ΔH°f = 117.36 kJ/mol
117.36 kJ of heat are absorbed when 1 mole of CS₂ is formed. The amount of heat absorbed when 5.0 moles of CS₂ are formed is:
5.0 mol × 117.36 kJ/mol = 5.9 × 10² kJ
How many energy levels does an atom of carbon have?
Answer:
6
Explanation:
What do modern scientist use in classifying organisms that Linnaeus did not use?
Answer:
The taxonomic units in modern taxonomy are domain, kingdom, phylum (division is sometimes used in botany in place of phylum), class, order, family, genus, and species.
The evidence used by scientists use to classify organisms are essentially form and evolutionary relationships.
Evolutionary relationships.
The diversity of living organisms on earth is very overwhelming. Human beings have come up with ways of organizing, or classifying, biological diversity throughout human history.
Organisms can be classified according to any number of criteria, including overall similarities, colors or ecological factors. It was agreed that the most useful way for scientists to organize biological diversity is to group organisms according to shared evolutionary history or characteristics. Grouping did not only result in an organized classification but it also contains and conveys information about our understanding of the evolutionary history of those groups.
Although our understanding of evolutionary relationships among organisms has greatly improved but it is not complete. Relationships among organisms and groups of organisms continues to be revised as new data becomes available comparing them to the past. Almost all taxonomies or systems of nomenclature based on evolutionary relationships among organisms are being revised.
The use of binomial nomenclature system was proposed by Carl Linnaeus. In this system, the phylogenetic relationship, cladistic analysis, and systematic approaches are used.
Explanation: Hello, i hope this helps. Your so very welcome!
The H3O+ ion concentration of a solution is 1 × 10–5 mole per liter. This solution is
A. acidic and has a pH of 5
B. acidic and has a pH of 9
C. basic and has a pH of 5
D. basic and has a pH of 9
The given [tex]H_3O^+[/tex] ion concentration of a solution is an acidic solution and has a pH of 5.
How does the pH scale measure?The letters pH stand for the potential of hydrogen since pH is effectively a measure of the concentration of hydrogen ions (that is, protons) in a substance.The pH scale measures the relative acidity and alkalinity of solutions.It's a negative logarithmic scale of base ten that measures the potential of a solution to accept protons in the form of hydrogen ions.A pH scale ranges from 0 to 14 with 7 being neutral. A pH lower than 7 is considered acidic and a pH greater than 7 is considered basic (alkaline).What is the pH value of an [tex]H_3O^+[/tex] ion?pH can be calculated by using the following equation:
pH = -1(log[H3O+])
Where [H3O+] is the concentration of hydronium ions (hydrogen ions).
The concentration is given as 1 × [tex]10^-^5[/tex] mole per liter.
So, if [H3O+] = 1x[tex]10^-^5[/tex] mol/L,
then the pH = -1(log(1 × [tex]10^-^5[/tex] )) = 5
So, the pH of the given solution is 5. The value is less than 7. Hence it is considered an acidic solution.
Therefore, The given solution is an acidic solution with a pH of 5.
Learn more about the pH of a solution here:
https://brainly.com/question/4137247
#SPJ2
(10 POINTS!!!!!!!!!!!
What environmental change will take place when harmful substances get into the food and water supply of animals or plants?
A Climate change
B Increased predators
C Lack of food
D Pollution
need asap
Answer:
A climate change
Explanation:
the surrounding area would be effected in all ways imaginable, such as change in air, soil, water, plants, animals. and if you eat those said animals those harmful things can transfur into you
What is the frequency of a wave that has a wavelength of 0.50 m and a speed of 380 m/s?
Answer: f = 760 Hz
Explanation: speed = frequency · wavelength v = fλ.
frequency f = v/ λ = 380 m/s / 0.50 m = 760 Hz
What would make oppositely charged objects attract each other more?
increasing the positive charge of the positively charged object and increasing the negative charge of the
negatively charged object
decreasing the positive charge of the positively charged object and decreasing the negative charge of the
negatively charged object
increasing the distance between the positively charged object and the negatively charged object
maintaining the distance between the positively charged object and the negatively charged object
Answer:
a: increasing the positive charge of the positively charged object and increasing the negative charge of the negatively charged object
Explanation:
The oppositely charged objects attract each other more is option a. It increased the positive charge and the negative charge.
The Attraction of the oppositely charged:At the time when the oppositely charged objects are attracted to each other more so here the positive charge should be increased with respect to the positive charge object and the negative charge is increased with respect to the negative charge object
Hence, the first option is correct.
Learn more about an object here: brainly.com/question/19587294
What is the number of moles in 10.62 L of H2S gas at STP?
Answer:
0.474 moles
Explanation:
divide 10.62 by 22.4.
What is the oxidation state of Carbon in CaC2O4?
Answer:
The oxidation state of carbon in CaC204 is 3
What were some of the causes of the Amu Darya and Syr Darya rivers being ruined?
urban sewer drainage
tannery dumping
tourism
drying up
agricultural chemicals
Answer:
drying up
agricultural chemicals
Explanation:
An 18.7 g sample of platinum metal increases in temperature from 21.2C to 23.5C
when 5.7 J of heat are added. What is the specific heat of platinum?
Answer:
132.53 J/kg.°C
Explanation:
Applying,
Q = cm(t₂-t₁)................ Equation 1
Where Q = amount of heat, c = specific heat capacity of platinum metal, m = mass of platinum metal, t₁ = initial temperature, t₂ = Final temperature.
Make c the subeject of the equation
c = Q/m(t₂-t₁).............. Equation 2
From the question,
Given: Q = 5.7 J. m = 18.7 g = 0.0187 kg, t₁ = 21.2°C, t₂ = 23.5°C
Substitute these values into equation 2
c = 5.7/[0.0187×(23.5-21.2)]
c = 5.7/0.04301
c = 132.53 J/kg.°C
17 moles of oxygen is equals to how many grams
17 × ( 2 × 16 ) = 17 × 32 = 544 grams
___________________________
Select the correct structure that
corresponds to the name.
2,2-dimethyl-3-hexyne
A. CH3CH2C=CC(CH3)3
B. CH3CH(CH3)C = CCH(CH3)2
C. both
Answer: A
Explanation:
The correct structure of the name of the compound given is CH₃CH₂C=CC (CH₃)₃.
What is 2,2-dimethyl- 3- hexyne?Dimethyl hexyne is an organic compound. Its chemical formula is C8H14. The compound hexyne is used to make a complex compound, agrochemical, and pharmaceutical compounds.
Thus, the correct option is A, CH₃CH₂C=CC (CH₃)₃.
Learn more about 2,2-dimethyl- 3- hexyne
https://brainly.com/question/24617388
#SPJ2
why would an electric vehicle be allowed to travel in the high occupancy vehicles lands with only one driver ?
Answer:
because it could self drive
Explanation:
idrk but thats my answer
A 25.0mL solution of KOH is neutralized with 30.3 mL of 0.100M HBr. What is the concentration of the original KOH solution?
Answer:
The concentration of the original KOH solution is 0.1212 M.
Explanation:
Dilution is the process to reduce the concentration of solute in solution. This is accomplished by adding more solvent to the same amount of solute. In other words, dilution is the procedure followed to prepare a less concentrated solution from a more concentrated one, and it simply consists of adding solvent to an existing solution.
As only solvent is being added, the consequence is that by not increasing the amount of solute, but if the amount of solvent, the concentration of the solute decreases.
The expression for the dilution calculation is:
Ci* Vi = Cf* Vf
where:
Ci: initial concentration Vi: initial volume Cf: final concentration Vf: final volumeIn this case:
Ci= ? Vi: 25 mL Cf: 0.1 M Vf: 30.3 mLReplacing:
Ci* 25 mL= 0.1 M* 30.3 mL
Solving:
[tex]Ci=\frac{0.1 M*30.3 mL}{25 mL}[/tex]
Ci=0.1212 M
The concentration of the original KOH solution is 0.1212 M.