A rectangular block weighs 240 N. the area of the block in contact with the floor is 20 cm2.calculate the pressure on the floor(give your answer in N/cm2
Help me Fast as you can,,

Answer:

Electric field will be greater when the battery is connected by the factor of 2.

Explanation:

Solution:

I will be doing some algebraic calculations to answer this question:

As we know that,

Q = CV

and

C = [tex]\frac{AE_{0} }{d}[/tex]

So, when separation = d/2, then,

[tex]C^{'}[/tex] = [tex]\frac{AE_{0} }{d/2}[/tex] by rearranging we get

So,

[tex]C^{'}[/tex]  = 2C

We further know that, Voltage will remain same if the battery is  connected.

This further implies that,

Q = CV

So,

[tex]Q^{'}[/tex] = [tex]C^{'}[/tex]V

[tex]Q^{'}[/tex]  = 2CV

[tex]Q^{'}[/tex] = 2Q

and we also know that,

Electric field E = [tex]\frac{Q}{AE_{0} }[/tex]

So, the new E or [tex]E^{'}[/tex] = [tex]\frac{Q^{'} }{AE_{0} }[/tex]

Hence,

[tex]E^{'}[/tex] = [tex]\frac{2Q}{AE_{0} }[/tex] = 2E

[tex]E^{'}[/tex] = 2E

when battery is disconnected, Q remain the same.

So,

When disconnected

E = E

E = [tex]\frac{Q}{AE_{0} }[/tex]  = Same

Hence, we can see that the magnitude of the electric does not depend upon the distance of separation. Instead it does depend upon the magnitude of charge.

So, when battery is disconnected, Q is same, so the Electric field.

But when it is connected, [tex]Q^{'}[/tex] = 2Q and the [tex]E^{'}[/tex] = 2E

So,

[tex]\frac{E connected}{E disconnected} = \frac{E^{'} }{E}[/tex] = [tex]\frac{2E}{E}[/tex] = 2

Electric field will be greater when the battery is connected by the factor of 2.

Answer:

[tex]a=12.97\ m/s^2[/tex]

Explanation:

Given that,

The length of a string, l = 0.87 m

Speed of the ball, v = 3.36 m/s

We need to find the acceleration of the ball. The acceleration acting on the ball is centripetal acceleration. It is given by :

[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{(3.36)^2}{0.87}\\\\=12.97\ m/s^2[/tex]

So, the acceleration of the ball is [tex]12.97\ m/s^2[/tex].

Answer:

45kw45_32+675&453try to get it done

Answer:

A: 9 kg

Explanation:

on edge! hope this helps!!~ ∩(︶▽︶)∩

Answer:What happens to the dew point temperature of a descending mass of air? As air sinks, it becomes warmer. (Warmer air expands and can hold more water, therefore the dew point may increase.) ... The hot water causes condensation of water vapor as it touches the cooler mirror.

Explanation:

Answer:

Different wavelengths of microwaves (grouped into "sub-bands") provide different information to scientists. Medium-length (C-band) microwaves penetrate through clouds, dust, smoke, snow, and rain to reveal the Earth's surface.

Answer:

6.45×10¯²⁶ J

Explanation:

From the question given above, the following data were obtained:

Frequency (f) = 97.3 MHz

Energy (E) =?

Next, we shall convert 97.3 MHz to Hz. This can be obtained as follow:

1 MHz = 1×10⁶ Hz

Therefore,

97.3 MHz = 97.3 MHz × 1×10⁶ Hz / 1 MHz

97.3 MHz = 9.73×10⁷ Hz

Thus, 97.3 MHz is equivalent to 9.73×10⁷ Hz.

Finally, we shall determine the energy at which the frequency is broadcasting. This can be obtained as follow:

Frequency (f) = 9.73×10⁷ Hz

Planck's constant (h) = 6.63×10¯³⁴ Js

Energy (E) =?

E = hf

E = 6.63×10¯³⁴ × 9.73×10⁷

E = 6.45×10¯²⁶ J

Therefore, the energy at which the frequency is broadcasting is 6.45×10¯²⁶ J

Answer:

See explanation

Explanation:

The question is incomplete because the images were not attached but I will try to help you as much as possible.

Constant acceleration implies that the velocity increases uniformly with time.

The graph of constant acceleration is a straight line graph having a slope. The slope of the graph is constant at any point along the straight line.

The image attached shows a velocity-time graph depicting constant acceleration.

Answer:

yes .

Explanation:

...

;-; :) have a good day

Answer:

because on air the speed is high compared to walking

Answer:

The green car had the greatest momentum

Explanation:

Momentum

Momentum can be defined as "mass in motion" and is calculated as the product of the mass of the object by its velocity.

Being v the magnitude of the velocity and m the mass of the object, the momentum is calculated with:

p = mv

The green car had a mass of m1=1200 kg and crossed the finish line at v1=53 m/s. Hence, its momentum was:

p1 = 1200 Kg * 53 m/s = 63600 Kg.m/s

The red car had a mass of m2=1100 kg and crossed the finish line at v2=55 m/s. Hence, its momentum was:

p2 = 1100 Kg * 55 m/s = 60500 Kg.m/s

Since p1 > p2, then the green car had the greatest momentum

Answer:

fixed pulley: A pulley system in which the pulley is attached to a fixed point and the rope is attached to the object. ... movable pulley: A pulley system in which the pulley is attached to the object; one end of the rope is attached to a fixed point and the other end of the rope is free.

Explanation:

Answer

I feel the answer is C because it could cause mental and physical trauma

Explanation:

Explanation:

A molten steel is in a liquid phase of matter. It has no defined volume of shape at this state. The particles inside this materials in this form is randomized by they are still attached to each other.

Answer:

P = 517.5 [kg*m/s]

Explanation:

We must remember that momentum is defined as the product of force by the time of force duration.

[tex]P=F*t[/tex]

where:

P = momentum [kg*m/s]

F = force [N]

t = time [s]

[tex]P=345*1.5\\P=517.5[kg*m/s][/tex]

Answer:

The energy used for the 30-day period is 4878000 kilojoules.

Explanation:

According to the power bill, 1355 kilowatt-hours was used over a 30-day period. A kilowatt-hour is equal to 3600 kilojoules. Then, we calculate the energy used, measured in kilojoules, is determined by simple rule of three:

[tex]E = 1355\,kWh\times \frac{3600\,kJ}{1\,kWh}[/tex]

[tex]E = 4878000\,kJ[/tex]

The energy used for the 30-day period is 4878000 kilojoules.

Answer: A capacitor.

Explanation:

The capacitor is a passive element that is used in electronics to store electrical energy maintaining an electrical field. The simpler case of a capacitor is the parallel plates capacitor.

It consists of two parallel metal plates separated by a distance D, in this case, the air between the plates works as a dielectric, as the plates do not touch each other and are separated by a dielectric, the charge is stored in the surface plates.

There are a lot of other types of capacitors, the most used in actuality may be the cylindrical one, where instead of parallel plates, it uses two concentric cylinders, and the space between the cylinders is filled with a dielectric/insulator.

This question is incomplete, the complete question is;

An air-filled capacitor stores a potential energy of 6.00 mJ due to its charge. It is accidentally filled with water in such a way as not to discharge its plates. How much energy does it continue to store after it is filled?

(The dielectric constant for water is 78 and for air it is 1.0006.)

Answer: it continue to store 0.07692 mJ after it was filled

Explanation:

Given that;

stored potential energy = 6.00 mJ = 0.006 J

dielectric constant for water K = 78

Energy stored  U = Q² / 2C = 0.006 J

C = ∈₀A/d { Air}

C = K∈₀A/d  { Water, k = 78 }

so

U = 0.006 / 78

U = 7.6723 × 10⁻⁵J

U = 0.07692 mJ

Therefore it continue to store 0.07692 mJ after it was filled

Answer:

Here you go, hope this helps! :)

Explanation:

Opportunity cost is the value of the next best thing you give up whenever you make a decision. It is "the loss of potential gain from other alternatives when one alternative is chosen". ... For example, opportunity cost is how much leisure time we give up to work.

Answer: c. 1.3 m/s^2

Explanation:

When he is at rest, is weight can be calculated as:

W = g*m

where:

m = mass of the man

g = gravitational acceleration = 9.8m/s^2

We know that at rest his weight is W = 824N, then we have:

824N = m*9.8m/s^2

824N/(9.8m/s^2) = m = 84.1 kg

Now, when the elevators moves up with an acceleration a, the acceleration that the man inside fells down is g + a.

Then the new weight is calculated as:

W = m*(g + a)

and we know that in this case:

W = 932N

g = 9.8m/s^2

m = 84.1 kg

Then we can find the value of a if we solve:

932N = 84.1kg*(9.8m/s^2 + a)

932N/84.1kg = 11.1 m/s^2 = 9.8m/s^2 + a

11.1 m/s^2 - 9.8m/s^2 = a = 1.3 m/s^2

The correct option is C

Answer:True

Explanation:

Answer:

I am going to say true not too sure

Answer:

0.007

Explanation:

A = F/P

Force = 1730

P = 2.45 = 2.47 * 10^5

1730/(2.47*10^5) = 0.007

Answer:

Hi.

The answer to this problem is 0.007

Explanation:

It was correct for Acellus

How to solve it:

P=F/A

Rearrange it for A, plug in the numbers and solve!

A=F/P

F=1,730

P=2.45

Answer:

a) 37.70 m/s

b)710.6 m/s²

Explanation:

Given that ;

Mass of object = 2 kg

Radius of the motion = 2m

Frequency of motion = 3 rev/s

The formula to apply is;

v= 2πrf   where v is linear speed

v = 2×π×2×3 =12π = 37.70 m/s

Centripetal acceleration is given as;

a= 4×π²×r×f²  

a= 4×π²×2×3²

a=710.6 m/s²

Answer:

5m

Explanation:

[tex]4^{2}+3^{2}=5^{2}\\5^{2}=25[/tex]

Use the Pythagorean theorem to calculate the long edge of the triangle, which would be his displacement.

Answer:

When the dose is high enough, ionizing radiation causes two types of harm to humans: direct tissue damage and cancer. Direct tissue damage happens when enough molecules are broken apart that the cells simply can no longer function. This can lead to radiation burns, radiation sickness, organ failure, and even death.

Answer:

See the answers below.

Explanation:

In order to solve this problem we must use the principle of energy conservation. Which tells us that the energy of a body will always be the same regardless of where it is located. For this case we have two points, point A and point B. Point A is located at the top at 120 [m] and point B is in the middle of the cliff at 60 [m].

[tex]E_{A}=E_{B}[/tex]

The important thing about this problem is to identify the types of energy at each point. Let's take the reference level of potential energy at a height of zero meters. That is, at this point the potential energy is zero.

So at point A we have potential energy and since a velocity of 18 [m/s] is printed, we additionally have kinetic energy.

[tex]E_{A}=E_{pot}+E_{kin}\\E_{A}=m*g*h+\frac{1}{2}*m*v^{2}[/tex]

At Point B the rock is still moving downward, therefore we have kinetic energy and since it is 60 [m] with respect to the reference level we have potential energy.

[tex]E_{B}=m*g*h+\frac{1}{2}*m*v^{2}[/tex]

Therefore we will have the following equation:

[tex](6.5*9.81*120)+(0.5*6.5*18^{2} )=(6.5*9.81*60)+(0.5*6.5*v_{B}^{2} )\\3.25*v_{B}^{2} =4878.9\\v_{B}=\sqrt{1501.2}\\v_{B}=38.75[m/s][/tex]

The kinetic energy can be easily calculated by means of the kinetic energy equation.

[tex]KE_{B}=\frac{1}{2} *m*v_{B}^{2}\\KE_{B}=0.5*6.5*(38.75)^{2}\\KE_{B}=4878.9[J][/tex]

In order to calculate the velocity at the bottom of the cliff where the reference level of potential energy (potential energy equal to zero) is located, we must pose the same equation, with the exception that at the new point there is only kinetic energy.

[tex]E_{A}=E_{C}\\6.5*9.81*120+(0.5*9.81*18^{2} )=0.5*6.5*v_{C}^{2} \\v_{c}^{2} =\sqrt{2843.39}\\v_{c}=53.32[m/s][/tex]

Answer:

[tex]d_{i}=465 cm=4.65 m[/tex]  

Explanation:

Using the thin lens equation, we have:

[tex]\frac{1}{f}=\frac{1}{d_{o}}+\frac{1}{d_{i}}[/tex]

Where:

f is the focal length

d(o) is the distance of the object

d(i) is the distance of the image

[tex]\frac{1}{15}=\frac{1}{15.5}+\frac{1}{d_{i}}[/tex]

[tex]\frac{1}{15}-\frac{1}{15.5}=\frac{1}{d_{i}}[/tex]    

[tex]d_{i}=465 cm=4.65 m[/tex]          

Therefore, the screen is at 465 cm.

I hope it helps you!

First the aceleration:

Vf² = Vo² - 2ad

a = (Vf² - Vo²) / 2d

a = (0 m/s)² - (1,5 m/s)²) / 2 * 0,4 m

a = -2,25 m²/s² / 0,8 m

a = -2,81 m/s²

Now, for the net force, use 2nd law of Newton:

F = ma

F = 3,5 kg * (-2,81 m/s²)

F = -9,835 N

The force for stop the bowling ball is -9,835 Newtons.

Answer:

6m/s

Explanation:

The tangential velocity is the product of the linear velocity and the radius. This is expressed as;

v = wr

w is the angular velocity = 3rad/s

r is the radius = 2m

Substitute

v = 3 * 2

v = 6m/s

Hence the tangential velocity of the object is 6m/s

Answer:

68.88 m/s

Explanation:

downstream speed = 8+1.9=9.9 m/s

upstream speed = 8-1.9= 6.1 m/s

Therefore, total time taken would be 260/9.9+260/6.1 = 26.26+42.62 =

68.88 m/s