A nickel sample absorbs 74 J of energy from warm water. The water cooled from 65.5 °C to 63.4 °C. What mass of water was cooled?​

Any substance that is burned in a flame emits a distinctive hue. Knowing the sort of cation present in the compound will allow us to forecast the color of the flame.

Based on the results of the flame test, the provided sweeteners can be separated from one another.

• Equal, an artificial sweetener, is made of a non-ionic molecule (C14H18N2O5). It has no cations at all. It won't exhibit any color in the flame test as a result.

Ace-K sweetener contains the K+ ion as its cation. Ace-K emits a lilac-colored flame as a result of the K+ ion's existence.

• The cation in Sweet 'N Low is the Ca2+ ion. Sweet 'N Low produces a flame that is brick-red in color due to the presence of Ca2+ ions.

To learn more about flame tests:

https://brainly.com/question/28715571

#SPJ4

Sulphur dioxide (SO2) is a molecule that consists of one sulphur atom and two oxygen atoms. The sulphur atom has a charge of +6 and the oxygen atoms have a charge of -2, so the overall charge of the molecule is neutral, as the charges cancel out.

The formula for sulphur dioxide is determined by the number of atoms of each element that are present in the molecule. In the case of sulphur dioxide, there is one sulphur atom and two oxygen atoms, so the formula is written as SO2.

The common charges formed by sulphur and oxygen can be used to determine the formula of a compound. The charges of the atoms can be used to determine the number of atoms needed to balance the charges and result in a neutral compound. However, it would not be the only way to determine the formula of a compound; other ways include observing the chemical reactions, using mass spectroscopy, or using X-ray crystallography.

It is possible to use the common charges that sulphur and oxygen atoms make to determine the formula of a compound by determining the number of atoms needed to balance the charges and result in a neutral compound. However, this is not the only way to determine the formula of a compound. Other methods include observing the chemical reactions, using mass spectroscopy, or using X-ray crystallography.

In summary, the formula for sulphur dioxide (SO2) is determined by the number of atoms of each element that are present in the molecule, which in this case is one sulphur atom and two oxygen atoms. The charges of the atoms can be used to determine the number of atoms needed to balance the charges and result in a neutral compound, but it is not the only way to determine the formula of a compound.

Learn more about Sulphur dioxide : https://brainly.com/question/15654465

Waves have energy that causes particles in matter to vibrate, which is why they can transfer energy and heat through matter.

The frequency of a wave is a degree of what number of oscillations or cycles of the wave arise in a given time period. It is measured in hertz (Hz). The electricity of a wave is associated with its frequency in that the higher the frequency of the wave, the extra electricity it contains. This is due to the fact greater oscillations according to 2nd manner that extra electricity is being transferred in a given amount of time. So, waves with better frequency have more power than waves with decrease frequency. That is why waves with high frequency like X-rays and Gamma rays are considered dangerous as they create more energy and may reason ionization, even as waves with low frequency like Radio waves are less dangerous as they bring less energy.

To know more about Frequency visit: https://brainly.com/question/5102661

#SPJ1

Answer:

The mass of 4.55 x 10^28 atoms of vanadium is 2.31 x 10^30 u or 2.31 x 10^30 grams.

Explanation:

To calculate the mass of a given number of atoms, we need to know the atomic mass of the element in question, which is the mass of one atom of that element. The atomic mass of vanadium is approximately 50.94 u (unified atomic mass unit)

To calculate the mass of 4.55 x 10^28 atoms of vanadium, we can use the formula:

mass = (number of atoms) x (atomic mass)

mass = (4.55 x 10^28 atoms) x (50.94 u)

mass = 2.31 x 10^30 u

The mass of 4.55 x 10^28 atoms of vanadium is 2.31 x 10^30 u or 2.31 x 10^30 grams.

It's important to note that this is a very large number, expressing the mass in kilograms or even tons would be more practical.

The following equation may be used to calculate the amount of energy necessary to raise the temperature of a substance: Q = mcΔT where Q is the energy in joules.

m is the substance's mass in grams, c is the substance's specific heat capacity in J/g°C, and T is the temperature change in degrees Celsius. The specific heat capacity of water is 4.184 J/g°C. So we can calculate the energy required to raise the temperature of 54 grams of water by 37°C as follows: Q = (4.184 J/g°C) (37°C) = 6907.88 J Divide joules by 100 to get centijoules: 6907.88 J / 100 = 69.0788 cJ Using the specific heat capacity formula, we can determine how much energy is needed to raise the temperature of 54 grams of water by 37°C: Q = mcΔT where Q is the quantity of energy. m is the substance's mass, c is its specific heat capacity, and T is the temperature change.

learn more about energy here:

brainly.com/question/1932868

#SPJ4

The gas-phase decomposition of SO2Cl2 is a first-order reaction, and the rate of the reaction is given by the equation: rate = k[SO2Cl2]

The half-life of a first-order reaction is given by the equation: T1/2 = 0.693/k (a) At 600 K, the half-life for the process is 2.3 x 105 s. To find the rate constant at this temperature, we can use the half-life equation to solve for k: T1/2 = 0.693/k ;2.3 x 105 s = 0.693/k ;k = 0.693 / 2.3 x 105 s = 3 x 10^-5 s-1 , (b) At 320 degree celcius  , the rate constant is 2.2 x 10^-5 s^-1. To find the half-life at this temperature, we can use the half-life equation and substitute in the given rate constant: T1/2 = 0.693/k;T1/2 = 0.693 / 2.2 x 10^-5 s-1 ;T1/2 = 3.15 x 10^4 s Therefore, the half-life of the reaction at 320 degree celcius is 3.15 x 10^4 seconds.

Learn more about rate constant here:

https://brainly.com/question/20305922

#SPJ4

If we add 25.6 g of an unknown molecular compound to the 0.250 kg of benzene, the molar mass of the unknown compound is 148.8 g/mol.

The Molality of the compound is given as :

ΔT = i Kf m

Where,

ΔT = freezing point depression = 3.54 °C

i =  Van't Hoff factor of the Benzene = 1

Kf =  constant of the freezing = 5.12 °C/m

m = molality = ?

m = ΔT / i Kf

m = 3.54 / 1 × 5.12

m = 0.69 mol

molality = moles / mass of benzene

moles = 0.172

The molar mass = mass / moles

The molar mass = 25.6 / 0.172

The molar mass = 148.8 g/mol

To learn more about molar mass here

https://brainly.com/question/16928753

#SPJ4

The percentage by mass due to sodium in monosodium glutamate, C₅H₈NO₄Na is 15.75%

Percentage composition is defined as by the following formula:

Percentage = (mass of substance / mass of compound) × 100

Next, we shallm determine the mass of one mole of monosodium glutamate, C₅H₈NO₄Na. This is shown below:

Finally, we shall determine the percentage of sodium in the compound. Details below:

Percentage of sodium = (mass of sodium / mass of C₅H₈NO₄Na) × 100

Percentage of sodium = (23 / 146) × 100

Percentage of sodium = 0.1575 × 100

Percentage of sodium = 15.75%

Thus, the percentage of sodium is 15.75%

Learn more about percentage composition:

https://brainly.com/question/11952337

#SPJ1

Mass of tin = moles of tin x molar mass of tin

Mass of tin = 0.020 mol x 118.7 g/mol

Mass of tin = 2.37 g

Therefore, the mass of tin in the chemical reaction is 2.37 g.

If tin is heated, it cracks. This is caused by crystals rubbing against each other. This characteristic crackle is heard if a piece of tin is simply bent. Tin is very malleable and ductile.

Some properties of tin is that it amphoteric. On reacting with both strong bases and strong acids with the evolution of hydrogen occurs. With sodium hydroxide solution, tin forms Na2[Sn(OH)6]. The reaction with acids is slow in the absence of oxygen.

To know more about ductile,visit here:

https://brainly.com/question/29961125

#SPJ4

25.14 mL of 1.420 M NaOH solution is needed to titrate 25.00 mL of a 1.500 M H₃PO₄ solution.

Titration is a laboratory technique used to determine the concentration of a solution (the analyte) by reacting it with a solution of known concentration (the titrant). The goal of titration is to add the titrant to the analyte until the reaction is complete, at which point the concentration of the analyte can be calculated from the volume and concentration of the titrant used.

To determine the volume of NaOH solution required to titrate the given solutions, we can use the following equation:

M(acid) x V(acid) = M(base) x V(base)

where V represents volume and M represents molarity.

(a) To titrate 25.00 mL of a 2.430 M HCl solution with NaOH, we need to determine the volume of 1.420 M NaOH required to react completely with the HCl.

From the equation above, we can write:

2.430 M x 25.00 mL = 1.420 M x V(base)

V(base) = (2.430 M x 25.00 mL) / 1.420 M = 42.96 mL

Therefore, 42.96 mL of 1.420 M NaOH solution is needed to titrate 25.00 mL of a 2.430 M HCl solution.

(b) To titrate 25.00 mL of a 4.500 M H₂SO₄ solution with NaOH, we can use the same equation:

4.500 M x 25.00 mL = 1.420 M x V(base)

V(base) = (4.500 M x 25.00 mL) / 1.420 M = 79.58 mL

Therefore, 79.58 mL of 1.420 M NaOH solution is required to titrate 25.00 mL of a 4.500 M H₂SO₄ solution.

(c) To titrate 25.00 mL of a 1.500 M H₃PO₄ solution with NaOH, we use the same equation:

1.500 M x 25.00 mL = 1.420 M x V(base)

V(base) = (1.500 M x 25.00 mL) / 1.420 M = 25.14 mL

To know more about analyte, visit:

https://brainly.com/question/30101345

#SPJ1

The moles of sodium hydroxide are in 38mL of 0.50 mol/L NaOH exists  0.50 M(0.038 L).

The number of moles of a solute in a liter of solution is referred to as molarity. A solution's molar concentration is another name for molarity.

A solute's concentration in a solution, specifically the amount of it per unit volume of solution, is measured by its molar concentration, which is a chemical word. The number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the molarity unit that is most frequently used in chemistry.

The word "molar concentration" refers to the amount of a substance per unit volume of solution and is used to describe the concentration of a chemical species, specifically a solute, in a solution. Molarity, amount, and substance concentration are other names for this term.

Molarity is a measure of moles per Liter

[tex]$& M=\frac{m o l}{L} \text { or } M L=\text { moles } \\[/tex]

M = 0.50 M

[tex]& \mathrm{L}=38 \mathrm{ml} \text { or } 0.038 \mathrm{~L} \\[/tex]

[tex]& 0.50 M(0.038 L)=\text { moles } \\[/tex]

Therefore, the moles of sodium hydroxide are in 38mL of 0.50 mol/L NaOH exists  0.50 M(0.038 L).

To learn more about Molarity refer to:

https://brainly.com/question/17138838

#SPJ1

The surface of water sample has been evaporated until it dry in a crucible dish. The dry weight of crucible is 44.6420 g. The weight of the residue plus the crucible is 44.6484 g. The total solids in the sample is 6400 mg/L.

The volume of the sample = 10 mL

The weight of the crucible  = 44.6420 g

The  weight of the residue plus the crucible = 44.6484 g

The total solid = dissolved solids - nonvolatile solids

where,

Dissolved solids = 44.6420 g

Nonvolatile solids = 44.6484 g

The total solids = 44.6420 g - 44.6484 g

The total solids = 0.0064 g = 6.4 mg

The concentration of solids = 6.4 / 0.001

                                              = 6400 mg /L

To learn more about weight here

https://brainly.com/question/18255807

#SPJ4

A. Electrons, B. Protons, and C. Neutrons are the sub-atomic particles found in an atom. Electrons are subatomic particles with a negative charge that revolve around an atom's nucleus. The atom's nucleus contains positively charged protons, which are particles. Neutrons, neutral particles, are also present in the atom's nucleus.

Molecules are not sub-atomic particles, but rather a group of atoms that are chemically bonded together. Electrons determine the chemical properties of an element; protons determine the atomic number and neutrons add mass to the atom.

To learn more about subatomic particles:

https://brainly.com/question/16847839

#SPJ4

The buffer has a pH of 8.35.

Creating a buffer involves combining two solutions of different concentrations of a base and an acid. In this case, 150.0 ml of 0.25 m NaOH and 75.0 ml of 0.20 m NaOH are combined to create the buffer.

To determine the pH of the buffer, we must calculate the concentrations of the acid and the base in the buffer.

Using the formula for calculating the concentrations of the acid and the base in the buffer, we can calculate that the concentration of the acid is 0.068 M and the concentration of the base is 0.232 M.

We can then use the Henderson-Hasselbalch equation to calculate the pH of the buffer, which is 8.35. This means that the buffer has a pH of 8.35.

The buffer's pH is important because it helps maintain a relatively constant pH in a solution when small amounts of acid or base are added.

To learn more about pH, click here:

https://brainly.com/question/15289741

#SPJ4

The ratio of citrate : citric acid if the pH of the dish is 5.5 is  0.12

pH = pKa plus log(ka) pH - pKa = log([HA] / [A-]), where citrate is present in a 0.12 ratio. The word "denaturation" describes how fish proteins are changed by the citric acid in lime juice. The shapes of molecules, notably proteins, dictate the majority of their physical and chemical properties, and the less complex geometries of the typically coiled and folded protein complexes are unwound or unfolded. They have, in other words, "denatured," or lost their original nature. Yes, cooking does cause denatured proteins. However, a lot of other things than acids and heat can also denature proteins. This can be brought on by salts with high concentrations, including table salt (sodium chloride). The cream-whipping bubbles are an example of how it can be done using air. Alkalis can also be used to achieve it, the reverse despite occurring less frequently, the opposite of heat is low temperatures and acidity. The cooking analogy comes from the fact that heat is the most frequent source of protein denaturation in culinary environments.

Learn more about acidity here:

brainly.com/question/11543614

#SPJ4

The order of activity from most active to least active in the given scenario is: zinc, iron, lead. This is because zinc is the most active element in the group, as it has the least number of valence electrons.

making it more likely to participate in chemical reactions and replace other elements. Iron is the next most active, as it has a higher number of valence electrons than zinc, but still fewer than lead, which is the least active element in the group due to its high number of valence electrons, making it less likely to participate in chemical reactions and replace other elements.A chemical element with the atomic number 30 and the symbol Zn is zinc (Zn). It belongs to the periodic table's group 12 and is a transition metal. A bluish-white, glossy metal with high conductivity for electricity, zinc is a substance. It reacts with oxygen and water to produce zinc oxide (ZnO) and zinc hydroxide (Zn(OH)2) due to its comparatively high reactivity. Brass manufacture, galvanizing (coating steel or iron to prevent corrosion), and alloying other metals all utilize it often.

learn more about zinc   here:

https://brainly.com/question/13890062

#SPJ4

Irdosmine  has a mass of 386 g and a volume of 20 ml. It also is fairly unreactive to a magnet.

irdosmine, commonly known as osmiridium, is an alloy of iridium with a little amount of osmium. We discovered the rock using the density formula

density[tex]Density=\frac{mass}{volume}\\\\ =\frac{386}{20}\\\\ =19.3\\[/tex]

Both natural and synthetic iridosmine are utilised for the tips of pen nibs, surgical needles, and sparking points in engines due to their hardness and corrosion resistance. Siserskite is the name given to similar alloys that have more osmium than iridium. Iridosmine and siserskite both form hexagonal crystal structures. Natural osmium and iridium alloy used to make a strong, corrosion-resistant mineral that is often found in small amounts in needles and pen nibs.

learn more about iridium Refer:brainly.com/question/20713777

#SPJ4

The highest-energy orbitals of the seven valence electrons in the Group 7A elements are present (ns2np5). These elements typically form halides, or anions with -1 charges, such as fluoride (F-), chloride (Cl-), bromide (Br-), and iodide (I-), as they are one electron short of having an entire octet of eight electrons.

To Learn more About  seven valence electrons refer To:

https://brainly.com/question/7353574

#SPJ1

Answer:

less than 1g/cm3

The most common reason is that soil pH and nutrient content vary across the field, so if subsamples were taken from different parts of the field in each sample, the results will differ.

Depth, texture, structure, drainage conditions, and soil-moisture relationships are all important factors to consider when creating a soil profile.

A soil profile study is important for crop husbandry because it reveals surface and subsurface characteristics and qualities, such as depth, texture, structure, drainage conditions, and soil-moisture relationships, all of which have a direct impact on plant growth.

The most common reason is that soil pH and nutrient content vary across the field, so results will differ if subsamples were taken from different parts of the field in each sample. Because these samples would not be representative of the soil in the rest of the field, including them could lead to misleading results. Even if you plan to grow the same crop in the entire field, areas within a field where different crops have previously been grown should be sampled separately.

Here,

The most common reason is that soil pH and nutrient content vary across the field, so the results will differ if subsamples were taken from different parts of the field in each sample.

When creating a soil profile, it is critical to consider depth, texture, structure, drainage conditions, and soil-moisture relationships.

To know more about soil,

https://brainly.com/question/28428120

#SPJ1

Answer:

Instrumental Methods.

Explanation:

Compared to simple laboratory tests, instrumental methods of analysis may give improved: speed (they are quick) accuracy (they reliably identify elements and compounds) sensitivity (they can detect very small amounts of a substance in a small amount of sample)

Have a wonderful day! :-)

The basic pH of milk of magnesia neutralizes any extra stomach acid.

3 M of sulfuric acid ( H2SO4) will be present in the solution.

A solution's molarity, M, is calculated by multiplying the number of moles by the volume in liters.

M = n /V, where V is the volume of the solution in liters and n is the number of moles of the solute.

The molarity equation using the provided values, then solve it.

M = 0.75mol/0.25L= 3.0 M  

3.0 M  H 2 SO 4 (pronounced three molar sulfuric acid) is equal to 0.25 L.

Oil of vitriol, also known as sulphuric acid (Commonwealth spelling), is a mineral acid made up of the elements hydrogen, oxygen, and sulfur, and has the chemical formula H2SO4. It is a viscous liquid that is miscible with water. It has no color or smell.

The solution will have a concentration of 3 M sulfuric acid.

learn more about  sulfuric acid Refer:brainly.com/question/3645180

#SPJ4

The mole is a unit that scientists use to measure large quantities of atoms or molecules.

The mole unit is the amount of substance that contains 6 mole of atoms or molecules, which is approximately equal to the amount of substance that contains 6.02×10²³ atoms of such substance in a given state of matter.

Therefore, with this data, we can see that one mole is the amount of a substance that contains 6.02×10²³ atoms, and therefore we can use this unit to measure both atoms and molecules.

Learn more about the mole unit of measure here:

https://brainly.com/question/19964502

#SPJ1

The student has made an error in the reactants of the synthesis reaction.

The student is trying to make Magnesium oxide (MgO) but he is using Calcium and Oxygen instead of Magnesium and Oxygen. The correct reactants for the synthesis of magnesium oxide are magnesium (Mg) and oxygen (O2), not calcium (Ca) and oxygen (O). The correct balanced equation for the synthesis of magnesium oxide is Mg + O2 → MgO. The student is using the wrong element in the reactant side, which is Calcium, and thus this reaction would not happen in reality. Therefore, the student is mixing up different elements and reactants and the equation will not give the correct products.

To know more about magnesium oxide click here:

https://brainly.com/question/1533548#

#SPJ4

The decision between bottled water and tap water is strongly versus by preferences and priorities. Water supply is never a better option than bottled water.

The use of "against" abbreviations is typically more casual than using the full word. Use the complete term if you need to maintain a formal tone. The word "versus" can always be correctly spelled. Spelling things out is usually an excellent option if you are having trouble remembering which acronym is appropriate for your circumstance.

The People v. Defendant, the standard case caption in criminal court, casts the local community against a lone accused in an act of collective condemnation. 1. '”). The prosecution is sometimes used to Instead of "the Peoples," the prosecution may be referred to as "the State," "the Province," or "the United States" in various jurisdictions. Consider Orin S.

To know more about versus visit:

https://brainly.com/question/29678996

#SPJ4

The bond between the Li and O atoms is an ionic bond and The bond between the O and H atoms is a covalent bond

Lithium hydroxide, LiOH, is a compound made up of lithium (Li), oxygen (O), and hydrogen (H) atoms. The bond between the Li and O atoms is an ionic bond, which is a type of chemical bond formed by the attraction between positively and negatively charged ions. In this case, the lithium atom donates one electron to the oxygen atom, resulting in the formation of a Li+ cation and an OH- anion. The bond between the O and H atoms is a covalent bond, which is a type of chemical bond formed by the sharing of electrons between atoms. In this case, the oxygen and hydrogen atoms share electrons in order to complete their outermost electron shells.

Learn more about covalent bond here:

https://brainly.com/question/12663276

#SPJ4

Answer: C2H4 + 3O2  2CO2 + 2H2O

Explanation: Since the exact same amount of atoms is on both sides, no mass or matter is lost which agrees with the law of conservation of mass. This law states that The law of conservation of mass is that, in a closed or isolated system, matter cannot be created or destroyed. It can change forms but is conserved.

Hope this helped!